Issue when i try to use IMMCP3.

I have changed the existing values of a WBS in CJ40 & made one of the WBS value to ZERO. But when i try to use IMCCP3 the value of ZERO WBS is not getting copied to the Budget but instead it is showing the Previuos values.
Before Changing the values in CJ40.
WBS A - 16000
WBS B - 0
WBS C - 0
After changing Values in CJ40
WBS A - 0
WBS B - 8800
WBS C - 7200
After Executing the IMCCP3 the WBS with ZERO is not getting updated....i have seen the Budget Reports. It shows as
WBS A - 16000
WBS B - 8800
WBS C - 7200
Please help me in getting rid of this 16000 value in the WBS.... Thanks

Hi,
When you used 1st time IMCCP3 the plan value become your budger for WBS A as 16000.
When you Chnaged Plan Value For  as
WBS A - 0
WBS B - 8800
WBS C - 7200
and run IMCCP3 , the sytem takes that there is no value to transfer for WBS A, there is only Value for WBS B and WBS C.
at that time Your already budget value remain unchanged aas 16000.
IF you dont have to budget for WBS A as 16000, then remove budget by using cj38 from WBS A.
Thanks

Similar Messages

  • When I try to use my TWC App on my iPad2, the sound is about 15 seconds off from the picture.  This only happening on my iPad, not my phone or my computer.  TWC said it's an Apple issue.  Is there a fix?

    When I try to use my TWC App on my iPad2, the sound is about 15 seconds off from the picture.  This only happening on my iPad, not my phone or my computer.  TWC said it's an Apple issue.  Is there a fix?

    Hello Corkymom4,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps in the article below to resolve issues with apps downloaded from the App Store.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Take care,
    Alex H.

  • I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

    I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?

    What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
    In any case, start by going to the editor preferences>general, clicking this button and restarting the editor:

  • HT4356 Fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

    I have developed a fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

    Hi,
    I had a similar problem and found help for it. Go to the "Advanced" menu and select Extend features in Adobe Reader. That will enable rights which may resolve your problem. If that doesn't work, there is a really helpful guy in here, Robert Levine. You may want to ask him directly.
    Good Luck

  • When I try to use Mac Help or any other help menu, the help window opens up but it is empty.  How do I resolve this issue?

    When I try to use Mac Help or any other help menu, the help window opens up but it is empty.  How do I resolve this issue?

    Try moving these files to the Trash one at a time and test (but don't empty yet.)
    /Users/yourusername/Library/Preferences/com.apple.helpviewer.plist
    /Users/yourusername/Library/Preferences/com.apple.helpviewer.LSSharedFileList.pl ist
    If doing this doesn't help, then navigate to this location and delete the cache (but not the enclosing folder.)
    /Users/yourusername/Library/Caches/com.apple.helpviewer
    All are located in your home folder Library.

  • Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7.

    Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7 Ultimate

    Looks like I fixed it., thanks to another post I read.  I went into my Norton Security.  Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow"  This also fixed my error (-3212) which would not allow me to connect to the iTunes store. 

  • I already have installed Ai, Lr an Id, but when I try to use it the software says that the Proof period is over, and then ask me for a Serial Number of 6 digits. otherwise It offers to me to purchase a new subscription. BUT I ALREADY PAY 2 MONTH of THIS P

    I already have installed Ai, Lr an Id, but when I try to use it the software says that the Proof period is over, and then ask me for a Serial Number of 6 digits.
    otherwise It offers to me to purchase a new subscription. BUT I ALREADY PAY 2 MONTH of THIS PLAN!!!!!! 
    I want to USE the products….CAN YOU HELP ME????
    regards,
    Leticia
    There aren´t an email, a phone number, a chat or a place to find helpful. I live in Argentina, where I can find a solve to my problem?

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    If you really want to cancel, You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?

    Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?
    I updated itunes and everything but nothings working and i just can't figure it out?
    Everytime i restore the stupid thing, it never pops up in my itunes again like its supposed to!

    Loop
    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Toshiba HD worked fine with 2008 MBPro, but when I try to use with new MBAir, it says "read only" - how can I fix?

    I have a Toshiba external HD that I used with my old 2008 MBPro with no issues. I just got a new MBAir, and when I try to use the same Toshiba HD it will not allow me to write to the drive. The drive mounts and I can open files from it, but when I look at the info under Sharing & Permissions it says "You can only read." I'm not able to Verify it in Disk Utility either, as when I open it there all the Verify buttons are greyed out.
    I also noticed the drive format says Windows NTSF, which I don't understand since I was using it with a Mac before and have never used it with a PC. Do I have to reformat it to write to it from my MBAir? I have files on there that I don't want to lose, and the only PC I have available to me is at work.

    http://support.apple.com/kb/ht1274

  • My iPhone5 has terrible Network connection. It rarely works at the normal speed-if ever. I usually get 3G or 1x network dozens of times a day. My phone also gets pretty hot when i try to use any data for more than a few minutes.

    My iPhone5 network connection has been terrible for the past week and a half. My phone is no more than a year old so I don't see why it would be a problem with the phone. When I try to use the internet or look for apps or anything like that, anything that uses data really, it takes FOREVER if it even loads! Most of the time it won't even load. My network changes from LTE(which doesn't work well) to 3G(which works even less) and then to 1x(which basically doesn't work at all). This happens dozens of times a day. It's getting quite irritating. I've tried turning my phone off and letting it sit for a while and that does nothing. I'd really prefer NOT to restore my phone. What is the deal??!

    Are you broadcasting your SSID? Sometimes this can cause a problem connecting. Is this Cisco router running any turbo modes or special preparatory protocols.
    There are no know issues with Wi-Fi connectivity except on first connection; and the chance of 2 devices having the exact same issue is very unlikely. This sounds like something to do with your wireless router.
    Have you tried to connect to another Wi-Fi hotspot elsewhere?
    Do you have any 2.4 GHz wireless phones or security system that could interfere with connection?

  • HT4913 How do I resolve this issue when I try to download iTunes. I receive this error message " iTunes64Setup.exe is corrupt or invalid"

    How do I resolve this issue when I try to download iTunes on my laptop?  It fails because of this error message " iTunes64Setup.exe is corrupt or invalid"

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. Help please

    I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. I can call the same numbers manually so it's not my network. Any help would be appreciated.

    This sounds like an international issue? Although I can not see why? I brought my phone in Australia and operating it in Indonesia, I have the same issues.... Otherwise Siri works fine, even texting (SMS) to local numbers siri works well, but dialing local number it just wont work...! I will try using my Australian SIM card and see if that is the reason.. I tried changing the number in the contacts and took out the international prefix, I turned the international assist on and off still nothing.. How frustrating. I called apple, the technican had know idea and we to his supervisor, had to wait fro 40 miuntes and then I hung up..
    PLEASE HELP..!

  • I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    Oliver,
    Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
    Here is some help on activation if this is the issue:
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Pattie

  • When i try to use photo creation, message says photoproduct.exe can't be found.

    when i try to use photo creation, message says photoproduct.exe can't be found.  how can I resolve this issue?

    Hi Wayne.
    Please contact our customer support team at [email protected]
    Be sure to tell them your version of Windows (for example, XP, Vista, or 7). It would also help them to know which version of antivirus software you're running. They can help you figure that out if you don't know, and get you going again.
    Thank you for using HP Photo Creations,
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • I'm getting the below issue when I try to deploy a report with Dynamic parameters, when I deploy it with static parameters I'm not getting this issue.

    I’m getting the below issue when I try to deploy a crystal report with Dynamic parameters in BI Launch Pad, when I deploy the same report with static parameters I can deploy and run it. I have Restarted the BI server, still the issue exitno use. kindly help me on this issue.
    “This error occurred: Adding Crystal Report "CrystalReport1.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file CrystalReport1. Reason: Failed to read parameter object”.

    BO does not run dynamic params through the report as would happen without BusinessObjects (BO) or Crystal Reports Server (CRS).  When you publish a report with dynamic parameters to BO/CRS, the prompt is published to the repository so that it can be accessed through the Business View Manager (which can be installed as part of the client tools).  In order for this to work a couple of things need to happen:
    1.  You need to be sure that you check the "Update Repository" box on the Save As screen the first time you publish the report.
    2.  Your BO/CRS user needs to have "view" access to the Crystal2013ReportApplicationServer in the Servers section in the CMC - in fact, the Everyone group should be given view access to the server in order for dynamic prompts to work correctly.
    3.  In the Business View Manager, the Administrator user needs to give your user, or, even better, a Crystal Developers group full control access to the "Dynamic Cascading Prompts" folder.
    Best practice for dynamic prompts in a BO/CRS environment is to actually create the prompts in the Business View Manager.  This will allow you to create a single data connection that can be reused and also create lists of values such that the same list or prompt can be reused by multiple reports.  If you just create the prompts in Crystal, you will end up with multiple data connections to the same database, the prompts will use the whole query for the reports to get the dynamic values instead of just a focused query to the lookup table that contains the values, and there ends up being lots of duplication and chaos.
    -Dell

Maybe you are looking for