Issue while accessing Approve Clockin/Clockout corrections from UWL
Hi All,
We are not able to access approve clockin/clockout correction application from UWL.
We found one Note - 1600953 and implemented but still we are facing issue.
Request_id value is passed as Null in the URL.
Please find the URL and XML below :
URL:
https://Hostname:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultAjaxframeworkContent!2fcom.sap.portal.standalonecontentarea?NavigationTarget=OBN%3A%2F%2FBOTechnicalName%3Demployee%2FOperation%3Dapprovecorrections%2FBOSystemAlias%3DSAP_ERP_HumanResources&DynamicParameter=FROM_POWL%3DX%26Operation%3Dapprovecorrections%26BOTechnicalName%3Demployee%26REQUEST_ID%3Dnull%26BOSystemAlias%3DSAP_ERP_HumanResources&PrevNavTarget=navurl%3A%2F%2Fc3d9aa78324902a8e37ccfd1581ea857&sap-obn-url=OBN%3A%2F%2FBOTechnicalName%3Demployee%2FOperation%3Dapprovecorrections%2FBOSystemAlias%3DSAP_ERP_HumanResources&NavMode=1&CurrentWindowId=WID1401688105969
XML:
<ItemType name="uwl.task.webflow.TS91000330.SAP_ECC_HumanResources" connector="WebFlowConnector"
defaultView="DefaultView" defaultAction="defaultAction" executionMode="default">
<ItemTypeCriteria systemId="SAP_ECC_HumanResources" externalType="TS91000330" connector="WebFlowConnector"/>
<CustomAttributes>
<CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalObjectId"
objectType="WebflowContainer" cacheValidity="final">
<Attribute name="REQUEST_ID" type="string" displayName="Request ID"/>
</CustomAttributeSource>
</CustomAttributes>
<Actions>
<Action name="defaultAction" groupAction="" handler="ObjectNavigationLauncher"
returnToDetailViewAllowed="yes" launchInNewWindow="yes">
<Properties>
<Property name="Operation" value="approvecorrections"/>
<Property name="ObjectValue" value="REQUEST_ID=${item.REQUESTID}&FROM_POWL=X"/>
<Property name="DynamicParameter" value="REQUEST_ID=${item.REQUESTID}&FROM_POWL=X"/>
<Property name="ObjectName" value="employee"/>
<Property name="WebDynproApplication" value="HRMSS_A_CICO_APPR"/>
<Property name="WebDynproNamespace" value="sap"/>
<Property name="System" value="SAP_ERP_HumanResources"/>
<Property name="openInNewWindow" value="true"/>
</Properties>
<Descriptions default="defaultAction"/>
</Action>
</Actions>
</ItemType>
Please help.
Thanks,
Ravi.
Hi All,
This is resolved.
Issue was from WF approver task, in that Request id is not binded to correct Container element,.
After doing the correct binding it is working,
Thanks,
Ravi
Similar Messages
-
I'm facing performance issue while accessing the PLAF Table
Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
SELECT plnum pwwrk matnr gsmng psttr FROM plaf
INTO CORRESPONDING FIELDS OF TABLE it_tab
WHERE matnr IN s_matnr
AND pwwrk = p_pwwrk
AND psttr IN s_psttr
AND auffx = 'X'
AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
JessiHi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1 (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system -
Error while accessing menus in Runtime workbench from SLD
Hi I am getting following error while accessing menus in runtime workbench from SLD.( example: SLD->runtime workbench->component monitorung ->display)
"Error during communication with System Landscape Directory: User credentials are invalid or user is denied access "
I am using PISUPER to login to SLD and i am able to login to XI using this ID. I could find role -SAP_XI_RWB_SERV_USER - also in the user id profile of PISUPER.Hi Karthik,
Check if the roles are generated. Or ask your basis team to check.
IF the roles are generated then you have to check if exchange profile if the right username is mentioned or not. IF username is right then reenter the password.
Check the following parameter in exchange profile.
com.sap.aii.rwb.serviceuser.name
com.sap.aii.rwb.serviceuser.pwd
Regards,
Sumit
Edited by: Sumit Khetawat on Dec 28, 2007 11:52 AM -
ABAP Dump issue while accessing Gateway
Hi
We have recently upgraded our Gateway server to SP03. Eversince after service generation while accessing the XML/Metadata from the consumption page we get an HTTP error with Dump. Has anyone faced this problem before.
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance">
<code>HTTP/500/E/Internal Server Error</code>
<message>Call of service /sap/opu/sdata/sap/Z14335_RFC_BP_1/ terminated because of an error. The following error text was processed in system AC1 : Syntax error in program /IWCOR/CL_REST_HTTP_HANDLER===CP .The error occurred on the application server njsapnet3. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system AC1 in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server njsapnet3 in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server njsapnet3. You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator.</message>
</error>Hi All,
I am also facing the same issue.
When i am executing query/read operation my service it will works properly and getting data also,but when i am trying get X-CSRF token it throws error(ABAP Dump) .Can you please help me out this issue.
Based on the Tx: ST11..getting below log.
A ABAP Program /IWCOR/CL_REST_HTTP_HANDLER===CP .
A Source /IWCOR/CL_REST_HTTP_HANDLER===CCIMP Line 40.
A Error Code ASSERTION_FAILED.
A Module abassert.c.
A Function ab_aabAssertionFailedRabax Line 1880.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
N
N Thu Jan 03 15:00:58 2013
N *** ERROR => System ID and client from ticket are not the same than mine. [ssoxxkrn.c 1065]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
N *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c 1071]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
i am getting based on Tx:ST22
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
/IWCOR/CL_REST_HTTP_HANDLER===CP
Application Component OPU-FND-CCL
Note: I am using SAP NW-GW-SP04
Thanks,
Syam -
Issue while accessing a SQL Server table over OTG
Hi,
I have been learning oracle for about 1.5 years and am just starting to learn some OTG pieces. I am wondering about an issue. The issue is:
"We need help with an issue we are having while accessing a SQL Server table over OTG. We are getting the following error message in Oracle :
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC SQL Server Driver]Unicode conversion failed {HY000}
The column it is failing on is "-----------" in the view --------------- in the SQL Server database pointed to by the Oracle DB Link ------------------- thats created in the Oracle instances ---- and -----.
This was working before, but is now failing, we suspect its due to new multi-byte data being added to the base table in the above column."
I took out the details and added ---- instead. I am wondering your guys thoughts on fixing this issue and helping me learn along the way. ThanksHi Mike,
Thanks for the response, here are the details:
1. What is the character set of the Oracle RDBMS being used. What is returned by -
select * from nls_database_parameters;
NLS_CHARACTERSET
AL32UTF8
NLS_NCHAR_CHARACTERSET
UTF8
We get SQL_Latin1_General_CP1_C1_AS and 1252 as Collation Property and Code Page
The datatype of the column in question in SQL Server is nvarchar(100).
When I do a describe on the SQL Server view ( desc CK_DATA_FOR_OPL@------- ), I get the error below;
ERROR: object CK_DATA_FOR_OPL does not exist
Select * from CK_DATA_FOR_OPL@------ where rownum =1 does get me a row.
create table tmp_tab as
Select * from CK_DATA_FOR_OPL@----- where rownum =1;
desc tmp_tab shows the datatype of the said column in the table created in Oracle as NVARCHAR2(150).
Not sure why a column defined with size 100 in SQL Server should come across as 150 when seen over OTG. We see something similar in DB2 tables we access over OTG as well.
Edited by: 993950 on Mar 15, 2013 8:49 AM -
Issue while accessing Hyperion Applications
Hi,
we successfully Installed Hyperion 11.1.2 on win 2008 server R2 . Essbase and Planning was working fine.
Now we are facing issue while connecting to Hyperion Shared services , Planning , Workspace URL's.
When we tested all the web applications was working fine. Tried restart of the server but did not work.
Below error comes up when we try to access these applications.
<------------
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
------------->
Diagnostics show below details
WEB: Web Application Availability of Web application context http://INDCLDTC04.ind.cldsvc.accenture.com:8300/HyperionPlanning/
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
FAILED WEB: Web Application Availability of Web application context http://INDCLDTC04.ind.cldsvc.accenture.com:28080/workspace/status
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
Availability of Web application context http://INDCLDTC04.ind.cldsvc.accenture.com:10080/easconsole/console.html
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
Regards,
VijayaDid you register the Essbase application with Shared Service, do the following steps:
(EAS) console. Right click on the application name and select 'Register'.
application successfully registered. Log on to Shared Services and select the application to assign access control.
If the error is occurring with all Essbase applications, you can register all of them at one time:
Click 'Register all'. Confirm that all applications were successfully registered. Log on to Shared Services and try assign access control for all applications.
If the re-registration does not work from EAS you may need to reregister Essbase as a product.
Locate the product_config_#.xml in the directory EPM_ORACLE_INSTANCE/config/foundation/11.1.2.0/product/product_name
For example; the Essbase product file is located in EPM_ORACLE_INSTANCE/config/foundation/11.1.2.0/product/Essbaseserver/11.1.2.0
Open the file product_config_#.xml and locate the line:
<property_name>="hubRegistration">Configured</property>
Change the status from Configured to Pending.
Rerun 'startconfigtool.bat' or 'startconfigtool.sh' or the EPM System Configurator again and select the product. This enables you to reregister the product with Shared Services.
Now check with ur ULS -
*Security Error Issue while accessing youtube search method.
Hello All,
I am creating a flex aplication which has youtube videos search control. it works fine on local , but when I am trying to access this from any server its getting security error "[RPC Fault faultString="Security error accessing url" faultCode="Channel.Security.Error" faultDetail="Destination: DefaultHTTP"] " while accessing the search method url using httpservice. Can any one help me.
Thanks.You may need to add the -use-network=true compiler argument. When in Flex Builder this does not matter as much:
From Flex Builder main menubar, Project - Properties - Flex Compiler - Additional compiler arguments: -use-network=true
If this post answers your question or helps, please mark it as such. -
Performance issues while accessing the Confirm/Goods Services' transaction
Hello
We are using SRM 4.0 , through Enterprise Portal 7.0.
Many of our users are crippled by Performance issues when accessing the Confirm/Goods Services tab( Transaction bbpcf02).
The system simply clocks and would never show the screen.
This problem occurs for some users all the time, and some users for some time.
It's not related to the User's machine as others are able to access it fast using the same machine.
It is also not dependent on the data size (i.e.no . of confirmations created by the user).
We would like to know why only some users are suffering more pronouncedly, and why is this transaction generally slower than all others.
Any directions for finding the Probable cause will be highly rewarded.
Thanks
KedarHi Kedar,
Please go through the following OSS Notes:
Note 610805 - Performance problems in goods receipt
Note 885409 - BBPCF02: The search for confirmation and roles is slow
Note 1258830 - BBPCF02: Display/Process confirmation response time is slow
Thanks,
Pradeep -
Issue while trying to create Sales Order from Inbound Idoc ORDER05
Hi All,
I am trying to create a sales order through an Inbound idoc ORDERS05 created out of a Purchase order. The header pricing conditions from the Purchase orders gets populated in E1EDK05 segment and this needs to go to the Sales order header conditions while trying to create the Sales order.
But when the fields are getting incorrectly mapped to the Sales order. Issue being, the segment E1EDK05-BETRG contains the condition value. But this fields gets populated to the KOMV-KWERT (condition value) screen field on the Sales order header conditions. But this should have got mapped to field KOMV-KBETR (Rate). If I look at the Purchase order, E1EDK05-BETRG is the field getting fetched from field KOMV-KBETR on the Purchase order. So this should have correspondingly got mapped to KOMV-KBETR on the Sales order as well.
This looks like a standard behavior. But if any of you have encountered this issue before please let me know if any Correction instructions are available for the same. If this some issue in Pricing conditions configuration, do let me know.Hi Paaavan
You can set a break-point include "FV45PFAP_VBAP_BEARBEITEN_VORBE" that is called by both the SAP Standard and BAPI where the data is prepared and checked in the internal table XVBAP. Compare both SAP standard VA01 and your 'Z' program for what may be different in XVBAP.
I think the problem my be with regards to the business_object number that is hardcoded in the standard function module. It has given me issues before and hence I tend to use the function module SD_SALESDOCUMENT_CREATE to create sales documents with.
Regards,
Marius -
Issues while access Excel file saved on a domain.
Original title: Locked File Issue.
Hi Guys,
I am wondering if you can help.
I have a client using a Windows 7 x64 SP1 workstation who accessed files from an SBS 2011 Box [domain]
When more than 1 user accesses a document or SS it locks as expected but displays a user who does not exist or is not using the file, it happens with all files. and funnily display the correct user locking the file in file and share management!
The first thing I did was to check that each user was registered in Office as themselves and they were, the 2nd was to check the properties of the file paying attention to the author and this was also correct and showing a domain based user as the
author, I tried removing the user properties from the file and still the issue exists.
Does anybody have the answer!?
Cheers,
Kyle!A similar issue discussed at the following article:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx
In cases where the wrong user name is displayed in the file lock dialog
Sometimes where it says 'another user' it has the name of someone that didn't open the file or it has no name at all. Just a big ' ' where a name ought to be. Fear not, there is a fix for this problem. The flavor depends on whether you have Excel 2010
or Excel 2007. The below KB Articles contain hotfixes that address several issues, not just the file locked issue. But in the dialog of the article you will see this as one of the problem descriptions:
Wind Zhang
TechNet Community Support -
Issue while accessing deployed web-app on Weblogic 10.3.5
We have deployed a web app on Weblogic server 10.3.5 as a WAR file. The deployment looks fine and application is in "Active" state. However when we try to access the application it fails to detect the Struts tags and gives following error -
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /view/login/login.jsp
login.jsp:4:1: Type mismatch: cannot convert from Tag to JspTag
*<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtm*
*l1-transitional.dtd">*
*^---------------------------------------------------------------------------------------------------*
*<title><s:property value="customerLoginContentVO.pageTitle" /> Dashboard</title>*
------^
I looks like it doesn't get the Struts libraries. We have included the Struts libraries in WEB-INF/lib of the web app and set prefer-web-inf-classes to true in weblogic.xml. Why is it that it is able to find the jars to deploy but not to access the application.
One alternate method suggested is to have package the war into a ear and provide the mapping for struts libraries as prefer-application-packages in weblogic-application.xml. But we think creating a ear just for library load in not a right approach & we are definitely missing something.
Any help on this issue will be appreciated.
Thanks,
Jiten SWLS 10.3.5 (and some versions before that too, one of the 10.3.x releases changed this) should also support prefer-application-packages. It doesn't appear as though the documentation has been updated to reflect that.
Needs updating:
http://download.oracle.com/docs/cd/E21764_01/web.1111/e13712/weblogic_xml.htm#i1075205
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/programming/classloading.html#wp1098468
I'll file a documentation bug.
In the meantime, you can see that it is there in the XSD:
http://xmlns.oracle.com/weblogic/weblogic-web-app/1.2/weblogic-web-app.xsd
which is linked to from here:
http://download.oracle.com/docs/cd/E21764_01/web.1111/e13706/overview.htm#g1088563
Here is an example of what a weblogic.xml might look like.
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.2/weblogic-web-app.xsd">
<wls:weblogic-version>10.3.5</wls:weblogic-version>
<wls:context-root>FilterWeb</wls:context-root>
<wls:container-descriptor>
<wls:prefer-application-packages>
<wls:package-name>my.foo.package</wls:package-name>
</wls:prefer-application-packages>
</wls:container-descriptor>
</wls:weblogic-web-app> -
Issue while accessing a file using UTL_FILE
Hi,
My requirement is to check for the existence of a file in the file system(apps tier) and then launch a conc program to load the data.
There is a separate DB tier.
I am trying to use UTL_FILE.fopen to indirectly see if the file exists
and then proceed and I am trying to use UTL_FILE.fopen for that.
The file is placed in the apps tier. I have created a directory in the database with the path and using that in the UTL_FILE.FOPEN call.
However I am getting the following error. ORA-29283 - An attempt was made to read from a file or directory that does not exist, or file or directory access was denied by the operating system.
What could be the issue here? Is there anything that I need to do after creating the directory?.
Thanks,
Balaji/Pl post details of OS, database and EBS versions.
Are the Apps and DB servers physically separate ? If so, the directory on the Apps server where the file resides will have to be visible/updateable to the DB server in order for UTL_FILE to be able to read/write to it.
HTH
Srini/
The apps and db servers are separate. EBS version is 11.5.10.2 and the OS is unix.
How do I make the directory in apps server visible/updateable to the DB server?. I have created a directory in the database with the location of the file in apps tier.
Thanks for your quick reply
Regards
Balaji -
Issue regarding access of ABAP related services from portal
Dear All,
We need your input in the following issue:
Scenerio:
we have implemented ess 1.2 on ep7.0
here we have gone for "Enhanced Package 2" for TRAVEL for client requirements so Travel Services are ABAP WEBDYNPRO instead of Standard JAVA WEBDYNPRO and we have 2 transaction iviews on portal.
Now when an end user clicks on travel services, the request is forwaded to ABAP WAS. So, we need to maintain two entries in DNS: 1. Portal url, 2. ABAP WAS
Now the client doesnot want to maintain ABAP WAS entry in their dns. BUT if they do not maintain this than end users are not able to access ABAP related services...
Can you please suggest any possible solution for this issue.
Thanks & Regards,
JJHi,
Per SAP Note 1040325, it says "It is not possible if there is another component between the browser and the message server (for example, a portal)." In your case a firewall between the portal and WAS. So a direct connection between the client and the WAS system is required which is a security risk. The section below gives more detail on why this is the case/
The following is a excerpt from the Portal "Network and Communication Security" guide:-
Please note that the requirement for direct access between the client and the backend is well flagged in the documentation. For instance, please refer to the Portal Security Guide, specifically the section "Network and Communication Security" (http://help.sap.com/saphelp_nw04s/helpdata/en/b9/c892f1ffc34156883ddd24aec01253/frameset.htm):
'Neither the portal nor the AS Java provides a proxy function. [...] If you have set up a network architecture with one or more firewalls, and your portal integrates iViews that initiate client-backend communication, you must set up access for the client through the firewalls to the application server in the back end.'
So the only secure solution is to install a webdispatcher in your DMZ and forward the requests from the (5) Portal to the (6) webdispatcher as in the graphic below :-
........................................./-> (3) Webdisp -\....................../-> (5) Portal
(1) Client (IE) -> (2) Firewall |.........................|-> (4) Firewall |
.........................................\-> (6) Webdisp -/......................\-> (7) WAS
The original requests bound for the (5) Portal are relayed via the (3) webdisp1 as you can only have one webdisp connecting to one backend SAP system (Portal OR WAS).
Hope this helps.
Michael -
Issue while accessing links on portal
Hi,
Are there any special configuration steps to be taken in ACE configuration when we redirect users depending on url values?
we have our main website https://abc.com and it provides links to users for various applications.
If i go to https://abc.com and click the link xyz on it, i get back to main page again and current connections drops to 0. here my browser should be redirected to https://abc.com/xyz which is not happening.
But if i type in https://abc.com/xyz in browser, i go to correct page.
below is my configuration. please let me know if any other configuration is needed, Below config is with 2 links but actual production has many links.
I have similar issue for another application where links on main page can not be accessed. that application works on http instead of https.
rserver redirect xyz
inservice
webhost-redirection "https://abc.com/xyz"
rserver redirect uvw
inservice
webhost-redirection "https://abc.com/uvw"
rserver host abc
ip address 1.1.1.1
inservice
serverfarm redirect xyz
rserver xyz
inservice
parameter-map type http case_param
case-insensitive
no persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
parameter-map type ssl abc
cipher RSA_WITH_3DES_EDE_CBC_SHA
ssl-proxy service abc
key abc
cert abc
ssl advanced-options abc
serverfarm redirect uvw
rserver uvw
inservice
serverfarm host abc
rserver abc
inservice
class-map type http loadbalance match-any map1
match http url "/xyz"
class-map type http loadbalance match-any map1
match http url "/uvw"
policy-map type loadbalance first-match ssl-abc
class map1
serverfarm xyz
class map2
serverfarm uvw
class class-default
serverfarm abc
class ssl-intranet
loadbalance vip inservice
loadbalance policy ssl-abc
loadbalance vip icmp-reply active
nat dynamic 1 vlan 368
appl-parameter http advanced-options case_param
ssl-proxy server abcHI,
Try enabling persistence-rebalance, the parameter should look like this:
parameter-map type http case_param
case-insensitive
persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
Cesar R
ANS Team -
Performance Issue while access reports through Infoview.
Users run reports( Webi ,Crystal ) through Infoview u2013 Accessed by Categories , while navigating between categories( we have different categories : Sales, Purchasing..Etc ) in the Infoview is fine ,it takes time to show all the reports within the categories ,which takes around 3 u2013 5 mins , but run time of the each reports are quick and as expected.
In CMS , while navigating between categories and time taken to show all the reports within the categories are fine . couldnu2019t not understand why this is happening in infoview only.
Would like to know if any one have similar issues. Is there any settings needs to made on the tomcat server or CMS or Infoview. Searched for OSS notes and found a note : 1206095 but it is for Enterprise XI release2.
Product Details :
BOE XI3.1 SP3 .
Any info will be helpfull.Hello,
- Is Tomcat installed on the same server as BOE? If not, did you use wdeploy to deploy the WAR files? https://bosap-support.wdf.sap.corp/sap/support/notes/1325139
- Do you have more than one Tomcat server, and is it fronted by a load balancer. If it is, try bypassing the load balancer and access InfoView directly without going thru the load balancer.
There is a CMS command-line options that might help you improving performances in your environment.
That switch is named -maxobjectsincache which allows you to increase the maximum number of objects that the CMS stores in its memory cache. Increaseing the number of objects reduces the number of databases calls required and can improve CMS performance.
The default value for this option is 10000 and the maximum value is 100000. Please keep in mind it is not recommended to exceed 100,000 as too many objects in memory will result in the CMS degradation. I would suggest testing with 60,000.
Regards,
Wallie
Maybe you are looking for
-
Accounting document incorrect while reversing
All, Please see the statistics at the bottom . This is copied and pasted from Pur Order history . A PO created for 98000kg with unit price 1542 USD . Then made the GR(5000000016) for 1975 kg and next GR (5000000017) for 96410 KG . Then user understo
-
[SOLVED] No Sound with ALSA & Pulseaudio
Recently I made the transition from Debian to Arch, installed on a seperate partition using the chroot install method. All went smoothly, with the exception that there is no audio whatsoever. Over the last week I've read through the related topics on
-
how can we generate a spool for email in F110 payment run can we regenerate a new spool for email for an already run payment run.
-
Practical use of Java Logging API
There was a recent technical tip about the Java Logging API, but after reading it I still don't understand how to use it in a real situation. Can anyone help me with this with a practical example? At the moment I have try-catch clauses that catch exc
-
Audio Is out of sync in DVDSP but the FCP file used for QT export is fine. The compressed AC3 even seems streached like it's out of sync in the beginning but gets closer to in-sync as it plays down the timeline. I've used "Clip start trim" to adjust