Issue while installing NWDW 7.0 on Windows Vista

Hi all,
    Please give me your inputs in resolving my issue.
     I am trying to install NWDW 7.0 on windows vista machine(32 bit) and the installation stuck at the phase "Import Java dump". It's in the same phase from yesterday and couldnt proceed further/ throwing any error.
I have installed JDK 1.4.2_13 and using MAX DB version as "50095979_3   NW 7.0 Presentation - MaxDB Release 7.6.03 " from market place.
I have my time zone as GMT + 1.00 .
I 've referred few posts but couldnt figure out the solution.
Any pointers are highly appreciated.
Regards,
Sandeep.

Hi Senthil,
I've checked sapinst_dev.log file and couldnt find any error/ inconsistencies ecept the following oen which ended up incompletely.
    TRACE      2009-11-05 06:47:54.673 [synxcfile.cpp:339]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/IMPORT.XML to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB
INFO       2009-11-05 06:47:54.693 [synxcfile.cpp:493]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/I
I couldnt find dev_server0.log and dev_w0.log files .

Similar Messages

Error while installing Tuxedo 9.1 on Windows vista home premium .

Hi all,
I'm trying to install Tuxedo 9.1 on my laptop within Windows vista premium
I get this message "This application has unexpectedly quit. Invocation of this Java application
has caused an Invocation TargetException. This application will now exit(LAX)"
This error is due to null pointer exception.
You help will be welcome.
Rgds

I'm not sure what the differences are between Vista Premium and Vista Business, but I believe Tuxedo 9.1 has only been certified on Vista Premium. Is the Windows system a 32 bit or 64 bit system? In any case, this would be something to contact Oracle support about. I know at one point some of the Tuxedo installers had difficulty with certain JVMs, although I think they mostly now include their own JRE.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Error while installing 10 g database in windows vista

Hi all,
While trying to install oracle 10 g database in my laptop , i m getting error in the pre-requisite step itself.
i am getting the below mentioned error.
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
can anyone help me on resolving this.

Problem: The install has detected that the primary IP address of the system is DHCP-assigned.Apart from what OrionNet has already said, the actual problem being you are trying to install Oracle server on a laptop where the IP address is assigned at run-time by DHCP and not a static IP.
So you can
1. install a loopback adapter and use that or
2. get yourself a static IP
3. if your active directory allows name resolution, then manually override the check box in the installer and configure the network tools using the hostname instead of the IP addresses.

Issues while installing powershell V3.0

Hello Folks,
I am facing issues while installing powershell V3.0 on Windows 7 ultimate x64 machine.
It is throwing error as "The update is not applicable to your
computer." when I double click Windows6.1-KB2506143-x64 file.
Have checked that it have powershell V2.0 builtin in windows 7 and working as expected.
Have installed .NET framework 4.0 Full, then reinstalled
again rebooted machine.
Have tried with .NET framework 4.5 Full, still issue persists.
tried below workaround suggested on a forum:
start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-
KB2506143-x64.cab through CMD
IT returns error as:
Operation failed with 0x80070003
The system cant find the path specified
I am not able to figure out what exactly is going wrong.
Could someone please jump in to help ?
Thanks

Hi RajendraP,
Please also make sure Windows 7 Service Pack 1 (SP1) must be installed as a prerequisite on computers running Windows 7. To install SP1, go to
http://windows.microsoft.com/installwindows7sp1
Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0. You can install Microsoft .NET Framework 4.0 at
http://go.microsoft.com/fwlink/?LinkID=212547
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

Getting below mentioned error while installing a package in the windows 2012 server remotely through psexec command
Error 1718. Windows Installer Service could not be accessed.
The same msi is getting installed local in through when we are doing through manually
Please help on the same

Hi Rahulan,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
Just addition, please refer to following threads and check if can help you.
The Windows Installer Service could not be accessed.
error 1719 windows installer service could not be accessed ....
Hope this helps.
Best regards,
Justin Gu

Error while installing Oracle Apps R12 , on windows server 2003 R2

Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul Srivastava

Hi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava

While installing Adobe Acrobat 8 on Windows 7 Professional why do I get the message "Adobe pdf.dll on windows Vista CD-ROM is needed.

While installing Adobe Acrobat 8 on Windows 7 Professional, why do I get the messaage "Adobe pdf.dll on Windows Vista CD-ROM is needed"?

Because your software is far too old for Windows 7.

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Pacman Download DB issues while installing

Hey,
So I'm new to any type of Linux, but I thought I'd try arch out since many people recommend end it to me.
I'm in the install shell from the livecd and whenever I try to pacman -Sy to get the databases, they download full speed for a second then the DL speed just keeps dropping until the download cancels saying that it was too slow (less than 1b per 10secs). I've seen people post similar problems on here but none of their solutions worked for me.
Any help would be obliged,
-Cynthia
(I'm on my phone typing this BTW)
Last edited by Cynthia (2014-01-16 04:46:34)

for clarity :
Are you doing that while booting from the livecd, or booting from the minimal base system installed on your harddrive ?
If from the hdd : Which guide did you follow for installing and were there network problems during the install ?
Edit :
just realised your topic title says issues while installing.
Are you following https://wiki.archlinux.org/index.php/Beginners%27_Guide or another guide ?
Last edited by Lone_Wolf (2014-01-16 10:42:16)

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an erro

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Internal Error 2739" I have used the cleanup script included in Adobe Photoshop CS3 installer, and have removed all traces of Adobe apps including the beta versions and Acrobat 8 pro, and I still get the same error, how can I install this application? is there any way or do I have to reformat and reinstall windows?

Hello everyone,
I was having the same issue:
"Setup Error. Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Quit."
If you receive this error also, press Quit and follow these steps:
1. Start
2. Control Panel
3. Administrative tools (in classical view)
4. Event Viewer
5. Application
You will see something like this:
Double-Click for error (emphasized by red color). I have an error like this:
"Error 1327.Invalid Drive: E:\" if you have the same or e.g. Drive F:\ ir whatever letter, you should solve this problem extremely easy - just insert USB-flash into computer (it will launch as E\ or whatever disk) and than run installation again. It will work than.
Setup doesnt start if disk is offline.

Run time error while installing Labview 8.6.1 in Vista x64

hai friends,
i got an error( Run time error) while installing Labview 8.6 software. this software has bought from NI. it shows the error path as setup.exe. this software i had tried to install in vista x64. but when i am installing the same software in windows xp, it is installing fine...so what was the problem for this error. how to solve it, please help me....

Thank You Mr.Jason Daming,
Same error what post Mr.muks referred in the last reply....
When the installation begins an error occurs (after the acceptance of licence step in the installation procedure) with the title on the error window "Microsoft Visual C ++ Runtime Library " and displays the program set up path with these statements " This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
while installing the same Labview in windows XP..... it is installing fine... but in vistax64 only i am facing this kind of problem...

Not able to install ms-office 2013 in windows vista home basic

Hi
recently,we have purchased ms-office 2013 but we are not able to install the ms-office 2013 and it is showing not compatible.
it is an dell vostro laptop v1510.It is an 32-bit operating system .
Could you please share your ideas why i am not able to install MS-Office 2013 in windows vista Home basic.
We are using windows mail whether this windows mail will migrate all mails automatically to outlook 2013.
looking for your reply at the earliest.
Regards
Pradeep

Office 2013 does not run on Vista, it is only compatible with Windows 7 and above. You will not be able to install it.
System Requiremets for Office 2013
While the above link is for Office 365 as well as Office 2013, it shows the requirements.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

Can we install oracle 10g database on Windows Vista Home Edition?

Can we install oracle 10g database on Windows Vista Home Edition?

You didn't specify which Oracle10 Edition.
In the case of SE/SE one/EE, with a paid license Supported has a mean impact on production environments with paid licenses, since you wouldn't run on an unsupported platform facing the risk of being left without technical support from Oracle in case of an emerging issue.
For the XE Edition, this is not a certified combination, since the only certified editions are the Business, Enterprise, and the Ultimate editions, but you can try it, you don't have nothing to loose, supported, certified vs. unsupported in this case makes no difference since this XE is not supported either way (no patchsets, no bug fixes, no technical support from metalink), just an AS IS free software.
On the license agreement terms displayed when you download the XE software it states:
"No Technical Support
Our technical support organization will not provide technical support, phone support, or updates to you for the programs licensed under this agreement."
and
"THE PROGRAMS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE FURTHER DISCLAIM ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."
In case someone would be able to win a trial against oracle due to damage from the use of this software, the amount paid at maximum is 1,000.00 USD, not enough to even pay the lawyer's lunches.
For the XE users the primary source of 'kind of support' is the oracle forums, either the installation forum, the general database or the specialized XE forum.
Of course if this is for your own personal use for learning and testing and there are no third parties you could damage by doing this and if you don't have a paid license for this installation you may try it, but don't expect the Enterprise Manager to behave as defined by the manual, most of it won't work since the Home Edition doesn't have the privileges required for EM to work.
If this is your personal computer and when you bought it the computer provider installed from factory Home Edition, and if you want something to work there, you can try to install a Virtual Machine and install Oracle 10g on a supported guest OS.
~ Madrid

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Issue while installing NWDW 7.0 on Windows Vista

Similar Messages

Maybe you are looking for