Issue while installing web dispatcher

i am trying to install web dispatcher , i am facing a issue in SAP host agent.could you please help me resolve this issue.
SAP NetWeaver 7.0 including Enhancement Package 3 > Standalone Engines > Web Dispatcher > Web Dispatcher Installation( Last error reported by the step: Installation of SAP host agent using command "C:\Program Files\sapinst_instdir\NW703\STANDALONE\AS\WI\hostagent\saphostexec.exe" -upgrade failed with return value 1. Output was:
Upgrade service [OK] No upgrade necessary [ERROR] Open of service SAPHostExec failed ( The specified service does not exist as an installed service.
Above is error
Regards,
Manoj J

Hello Both,
issue has been resolved . i have started saphostagent via command saphostagent -install.
it started host control.
Thank you
could you please let me steps after installing sap web dispatcher in standalone system and how map it to HTTP request.
Regards,
Manoj J

Similar Messages

Error while installing web dispatcher NW04S SR2

Hi there,
Get this error when installing web dispatcher.... step after selecting the kernel source...
Pls help??
ERROR 2007-01-29 14:25:23
MUT-03011 Execution of the command "C:\WINDOWS\TEMP\2\sapinst_exe.6196.1170073192\SAPCAR.exe -x -v -g -i -f D:\test/DBINDEP/SAPEXE.SAR, webdispinst.lst" finished with return code 29. Output: SAPCAR: no archives specified for extracting (error 29). There are no more files.

I always setup SAP Web Dispatcher by running "sapwebdisp -bootstrap", although I haven't tried with SR2...
Cheers

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Re: problem while installing WEB-enyterprise

Ciao Rajeev
It looks like you don't have the http directory under your active
environment.
Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
'$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
peace
Claudio
-----Original Message-----
From: Rajiv Srivastava <[email protected]>
To: [email protected] <[email protected]>
Date: Tuesday, January 19, 1999 8:48 PM
Subject: problem while installing WEB-enyterprise
while running escript to install HTTP library on my machine(WINNT server)
i am getting a error -
system Error : There are no distributions available for the application
HTTP
can anybody help.
rajeev
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Starmgmjo,
Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Install web dispatcher on two different domain

Hi Everybody,
I'm going to install web dispatcher on DMZ, that's not the same domain as Portal domain, but it cannot realize the host name that I insert for "rdisp/mshost"
I'm guessing the problem is becuase they are in different domains, Do you have any idea that what should I do?
By the way, My portal is in Microsoft cluster environment.
Thanks,
Maryam

Hi Maryam,
you have to ensure that from network side everything is configured correctly that the SAP Web Dispatcher can
communicate with the message server.
The hostname configured with rdisp/mshost must be reachable with a ping command from the host the Web Dispatcher is running on .
Kind Regards
Thomas Alt

Getting connection error after installing Web Dispatcher for JAVA engine

Hi SAP Guru's,
I have installed Web Dispatcher instance on solution manager server machine for Production JAVA portal. I am getting below error when I am trying to access Production JAVA portal.
500 Dispatching Error
Error: -26
Version: 7000
Component: HTTP_ROUTE
Date/Time: Sat Feb 05 16:18:12 2011
Module: http_route.c
Line: 3139
Server: ERPSOL_WDP_04
Error Tag:
Detail: no valid destination server available for '!ALL' rc=13
Where as I have define all suitavle parameters in Web Dispatcher instance profile
SAPSYSTEMNAME = WDP
SAPGLOBALHOST = ERPSOL
SAPSYSTEM = 04
INSTANCE_NAME = W04
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = sapepjlg.pdilnoida.com
ms/http_port = 8102
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=8105
Please help on this as I have to deliver this before go live.
Regards,
Bijay

Hi Bijay,
Please check if services /public/icman, /public/icm_info are active & accessible in SICF(in case of Dual stack system) tx.
Regards,
Neeraj

Issues while installing powershell V3.0

Hello Folks,
I am facing issues while installing powershell V3.0 on Windows 7 ultimate x64 machine.
It is throwing error as "The update is not applicable to your
computer." when I double click Windows6.1-KB2506143-x64 file.
Have checked that it have powershell V2.0 builtin in windows 7 and working as expected.
Have installed .NET framework 4.0 Full, then reinstalled
again rebooted machine.
Have tried with .NET framework 4.5 Full, still issue persists.
tried below workaround suggested on a forum:
start /w %SystemRoot%\system32\pkgmgr.exe /ip /m:Windows6.1-
KB2506143-x64.cab through CMD
IT returns error as:
Operation failed with 0x80070003
The system cant find the path specified
I am not able to figure out what exactly is going wrong.
Could someone please jump in to help ?
Thanks

Hi RajendraP,
Please also make sure Windows 7 Service Pack 1 (SP1) must be installed as a prerequisite on computers running Windows 7. To install SP1, go to
http://windows.microsoft.com/installwindows7sp1
Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0. You can install Microsoft .NET Framework 4.0 at
http://go.microsoft.com/fwlink/?LinkID=212547
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Pacman Download DB issues while installing

Hey,
So I'm new to any type of Linux, but I thought I'd try arch out since many people recommend end it to me.
I'm in the install shell from the livecd and whenever I try to pacman -Sy to get the databases, they download full speed for a second then the DL speed just keeps dropping until the download cancels saying that it was too slow (less than 1b per 10secs). I've seen people post similar problems on here but none of their solutions worked for me.
Any help would be obliged,
-Cynthia
(I'm on my phone typing this BTW)
Last edited by Cynthia (2014-01-16 04:46:34)

for clarity :
Are you doing that while booting from the livecd, or booting from the minimal base system installed on your harddrive ?
If from the hdd : Which guide did you follow for installing and were there network problems during the install ?
Edit :
just realised your topic title says issues while installing.
Are you following https://wiki.archlinux.org/index.php/Beginners%27_Guide or another guide ?
Last edited by Lone_Wolf (2014-01-16 10:42:16)

Issue while opening webi reports using OpenDoc url in Chrome browser

Hi
We are in SAP BI4.0 SP7. We are facing weird issue while opening the webi report via OpenDoc url in chrome. we are facing the below issue only in chrome and it works perfectly in IE and Firefox.
For the first time the report gets opened properly(when a session is created). If we try to open the same report from the same machine in a different browser tab, report gets opened up without any Tables\charts. We could see only a blank page with just the Report Tab name at the bottom. If we do refresh on the page, the report opens up correctly. We have checked for packet drops and there is no such thing. Is there any setting that we should make to resolve this. Your help is appreciated.
thanks
Gokul

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Error while installing web tools.

I am currently trying to install E-Commerce and Web CRM on a Windows Vista desktop PC, that we are going to use as a Demo PC for potential customers. It is just a demo, so everything is being installed locally on the Demo PC. I run into an error while installing the Web Tools
After the Default Install and before I precede to the Advanced install, I browse to - localhost/B1webtools - and rather than load up the webtools license key request page, I am getting the following error.
HTTP Error 404.17 - Not Found
The requested content appears to be script and will not be served by the static file handler.
I didn't run into any errors during the default install, and it appeared to function just right.
Does anyone know what would cause this error???
Server Error in Application "DEFAULT WEB SITE/B1WEBTOOLS"
Internet Information Services 7.0
Error Summary
HTTP Error 404.17 - Not Found
The requested content appears to be script and will not be served by the static file handler.
Detailed Error Information
Module     StaticFileModule
Notification     ExecuteRequestHandler
Handler     StaticFile
Error Code     0x80070032
Requested URL     http://localhost/b1webtools/default.aspx
Physical Path     C:InetPubwwwrootB1WebToolsdefault.aspx
Logon Method     Anonymous
Logon User     Anonymous
Most likely causes:
u2022     The request matched a wildcard mime map. The request is mapped to the static file handler. If there were different pre-conditions, the request will map to a different handler.
Things you can try:
u2022     If you want to serve this content as a static file, add an explicit MIME map.
Links and More Information
Sometimes preconditions and a wildcard MIME map can unintentionally cause serving script source.
View more information »
Any help would be much appreciated. Thanks

Okay so I changed my Application pool and it solved that error. Now I'm able to get the page that has a link to the request license page, but when I click on that link it gives me this error:
Server Error in '/B1WebTools' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
   netpoint.LicenseRequest.Page_Load(Object sender, EventArgs e) +266
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3074; ASP.NET Version:2.0.50727.3074
I have repeatedly gotten this error on all Windows Vista machines that I try and install webtools on. Does anyone have a good idea on this one?

Issue while installing ODI 11.1.1.6 with JDK 7u

Hi All,
I am working on installing ODI on windows 64 bit. I downloaded lastest web logic server files, ODI files and JDK files from oracle site..
I installed Web Logice server with no errors but when I tried to install ODI by running the setup.exe it was giving me an error:
"Error: Provide the JDK/JRE Location while launching the installer. Invoke the sertup.exe with -jreLoc <JDK/JRE Location absolute path>Parameter(s)".
So, I looked in to JDK file and noticed that it is an old file and need to be updated so I installed "jdk-7uf-windows-i586.exe". After installing when I try to setup ODI, I am still getting the same error..
It is asking me to provide the location but I am not srue where to provide the location.. I know the location for JDK i.e. C:\Program files\Java\jdk1.7.0_04 but I am not sure where to provide this location for ODI..
Thanks a lot!

2 things must be noticed:
First: ODI 11g is not supported by JDK 7, I always use the JDK1.6.0_27 and works fine. When you try to open the ODI Studio, this message appears, telling that ODI is supported only with JDK 6 versions, so don't try to use JDK 7.
Second: I always install the JDK in a path without spaces, like "C:\JDK1.6.0_27\" and the excatly same thing to odi install files. So I call via Command Prompt:
C:\ODI_INSTALL\Disk1\setup.exe -jreLoc C:\JDK1.6.0_27\
I did over 20 windows installations using these settings, it'll work perfectly.
Regards.
Luiz Araujo

Facing Issue while Installing SOA server for setting up BPM11g working environment

Hi All,
I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
I am trying to install it for running BPM 11g application.
I saw the same problem has already been answered but available solutions are not resolving my problem.
Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
It is not asking for Java path in command prompt also.
a)In my system java 7 is installed.
b)I have used Oracle Database 11g instead of XE
Can this be the reason?
I checked Program Files:
jre7 and jdk1.7.0_45 are there.
I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
path :C:\Program Files\java\jdk1.7.0_45\bin
Please help me in fixing this as I am stuck in this installation from last few days.
Thanks!

Hi Binay,
You might want to consider instead installing it using JDK 1.6.
Here's where you can check the Fusion Middleware configurations: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
Dan

Facing issue while installing SAP 4.7 EX2

Hello,
While installing DB instance for SAP 4.7 facing issue...
ERROR 2009-12-16 17:21:07
FSL-06002 Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\D60\SYS\exe\run/brconnect ...).
I 'm stuck in runnign Update Database statistics step..any help is really appreciated..

user logged in has got Administrator right. Also do we need to log in with sidadm for installing DB instance or administrator user is sufficient?
Please find more detail logs....
we are getting error--ERROR 2009-12-16 17:21:07
FSL-06002 Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\D60\SYS\exe\run/brconnect ...).,
Getting error, when we are using BRtools 6.4
ERROR 2009-12-16 19:28:41
CJS-00288 Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPD60 returned 3.<br>SOLUTION: See brconnect.log for details.,
when we are using latest tools of Br 7.0
Also r3trans is failing...reason is ERROR => Cannot connect: TNS-name missing
Any advice...i have also added parameter dbs_ora_tnsname

Issue while installing FatWire on weblogic server

I was trying to install CS with Weblogic as the Application server.
During the installation of CS, I faced an issue while integrating with LDAP. In log it showed "Could not connect to the application server.Error in creating LDIF file.
I had given the valid credentials.
Have anyone faced this issue previously, if so please guide me thorugh.
And also, Is it mandatory to use LDAP ?
Thanks,
Rahul Nair

It sounds like the application server was turned off whilst you were running the LDAP configuration tool. The tool needs the application server to be running.
It's not mandatory to have LDAP integration with CS, from what I have seen most existing customers don't use it. There are also some performance benefits to avoiding LDAP integration.
If you do want LDAP integration then you don't need to configure it immediately after install. The LDAP configuration tool can be run separately, e.g. after you are happy the fresh install is working as expected.
Phil

Issue while installing

HI All,
I am getting this error while installing.
I tried to modify the task file by changing from err to ign.The problem is that the taks sapview.tsk contains many entries i cannot change one and then try sapinst because i dont know what all views were created.Is there a way to check all the views created in the system.
I have changed from err to ign as it is a view and no data in it.How can we find out what all views are created.Thanks.
DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(CREATE VIEW "/BI0/MINFOPROV" ( "INFOPROV" , "OBJVERS" , "CHANGED" ) AS SELECT T0001."INFOPROV", T0001."OBJVERS", T0001."CHANGED" FROM "/BI0/PINFOPROV" T0001)
DbSlExecute: rc = 102
(SQL error 955)
error message returned by DbSl:
ORA-00955: name is already used by an existing object
(DB) INFO: disconnected from DB
/usr/sap/ONW/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/ONW/SYS/exe/run/R3load: END OF LOG: 20111123090308

Please make sure you have all the views created else there will be issues in the system . These even though are only definitions , but are extremely important as they are referenced.
Some of the views have been created , so its not able to create a duplicate view in the SAP schema.
What you can do is change all the status to err in SAPVIEW.TSK and retry with the import.
That should drop and re-create all the views.
You should not manually change .TSK files unless you are very confident of the consequences .
Edited by: Ratnajit Dey on Nov 24, 2011 9:20 AM

Issue while installing web dispatcher

Similar Messages

Maybe you are looking for