Issue while loading of data from DSO to InfoCube

Hi Experts,
Can you tell me what might root casue if data is coming into DSO from R3 its correct and fine as required but while loading it to InfoCube from DSO its showing wrong data like some of Line Items that were closed were shown open in Cube AND also KF values were not right
Also there is no Routine code involved b/w DSO and InfoCube.
Thanks in adv .
NP

Hope you didnt delete some req from DSO without deleting change log . This might cause inconsistency.
If so , delete data from dso by right click delete data  and reload .

Similar Messages

  • Error while loading the data from ODS to InfoCube

    hai
    Im trying to load the data from ODS to InfoCube for particular year .
    But it says that there is a source system problem .
    why it is like that .
    pls tell me
    i ll assing the points
    rizwan

    Hi Rizwan,
    you didn't mention the error message in details. there could be a few places to be checked:
    - check if BW itself source system is active and in tact and reactivate if necessary
    - check if update rule is active and reactivate if necessary
    - check if ODS is active and reactivate if necessary
    Regards,
    Lilly

  • Issue while loading master data from BI7 to BPC

    Dear Experts,
    I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
    My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
    1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
    2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
    What could be the reason to not getting BI infoobject as source in BPC?
    Thanks in advance...
    regards,
    Raju

    Dear Gurus,
    My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
    Thanks and regards,
    Raju

  • Issue while loading master data from BI to BPC

    Dear All,
    I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
    I haven't restrict any ID's using conversion file as well.
    What could be the reason? How can I overcome this and load all member's ID in BPC?
    Thanks & Regards,
    Ramesh.

    Ramesh,
    Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
    Check if you have the Update mode ..
    Hope this helps...

  • Regarding  Loading the data from DSO to cube.

    Hello Experts,
    I have DSO which loads data from psa  using 7.0 tranformation (using DTP).  And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by  right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
    Please help me with this.
    i want to load the data in the init request to cube..
    Thanks

    Hi Shanthi,
    Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
    Thanks

  • Error while loading the data from text file

    Hi,
    I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
    Can any one please suggest me the solution.

    Possible Solutions
    Make sure that the data source is valid.
    Is a member from each dimension specified correctly in the data source or rules file?
    Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
    Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
    If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
    Does the data source contain extra spaces or tabs?
    Has the updated outline been saved?

  • Error 8 while loading the data from the souce system

    Hi Gurus
    Every day we are loading some data from one of our souce systems through process chain
    But today all the loads failed complaining about error 8 while extacting the data
    connection to source system is fine
    we have the problem while loading master data from the same source system
    any solution?
    Thanks in advance

    Hi,
    Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
    hope it helps...
    regards,
    Raju

  • Problem in transfering data from DSO to InfoCube

    Hi,
    I am trying to transfer data from DSO to Infocube. But it is giving the following message.
    Last delta update is not yet completed
    Therefore, no new delta update is possible.
    You can start the request again
    if the last delta request is red or green in the monitor (QM activity)
    It is not allowing to load data to InfoCube from DSO. I checked the request number. But there is no request number in InfoCube. If request no is there I can delete the request from InfoCube and delete the data mart status in DSO and reload again.But there is no request id in IC. So plz guide me how I can tranfer data to InfoCube overcoming this problem.
    Actually further updata was running from DSO to IC. But it failed. Executing Function Module : RSPC_PROCESS_FINISH, I set the chain  green before loading
    data to InfoCube. So it starts executing the next chain. So there is no request id. So plz guide me how I can retain this request id.
    Edited by: Purushotham Reddy on Jan 28, 2008 11:19 AM

    Hi Reddy,
    Make the QM Status Red of the failed request even if it is red.
    and then run the same infopackage used in the chain. This will ask for repeat of last delta.
    If this process is understood to u then its fine otherwise read below:
    the other option is check if this failed request is present in PSA. If it is present in PSA then update the failed request from PSA, here u wont need to do a repeat of last delta. This Option is easier. this u can do from the ,manage tab of the data source I think this u might be surely knowing....
    Assign Points if it helps u.....
    Thanks,
    Nagesh.

  • Error in uploading data from DSO to Infocube in 3.5(rsa1old)

    While uploading data from DSO to Infocube, I selected Initial update option
    In schedule tab when I clicked start, an error occured it says:
    Delete init request
    REQU_D4YTAGX8PEOUQJLSKOEPH9EV before running
    init. again with same selection.
    Can anyone let me know how should I delete that request.
    Thanks,
    Soujanya.

    Hi,
    Go to RSRQ and enter the request then execute. This should bring you to Monitor u2013 Administration Workbench. From there you will see the InfoSource (usually has u201C8u201D as a prefix). Get the InfoSource name. Go to RSA1 to find the InfoSource. From here it gets a bit tricky. Go to the datasource and drill down to the related InfoPackage. Go to Infopackage scheduling. Then go  to Scheduler Menu, the Initialization Options for Source System should be open. You can see from there the request with error. Let me know if this answers your question.
    Regards,
    JD Datuin

  • Unable to load the data from PSA to INFOCUBE

    Hi BI Experts, good afternoon.
        I am loading 3 years data( Full load ) from R/3 to Infocube.
       So loaded the data by monthwise. So i created 36 info packages.
      Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
    So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
      Here i got data in PSA without fail.
      Then i tried to load the data from PSA to Infocube MANUALLY.
    But its not happening.
      One message came this
           SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
       Please give me the solution how to solve this problem.
      Thanks & Regards
         Anjali

    Hi Teja,
       Thanks for the good response.
      How can i check whether it is already compressed or not?
      Pls give me the reply.
      Thanks
              Anjali

  • Issue when uploading Sales data from DSO to Cube.

    Dear All,
    I have an issue when I am uploading Sales data from DSO to Cube.  I am using BI 7.0 and I have uploaded all sales document level data to my DSO.  Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube.  Cube has customer wise aggregation data.
    In DSO I have NetPrice(KF) and Delivered_QTY(KF).  I do a simple multiplication routine in the transformation from DSO to Cube.
    RESULT =   SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
    At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
    Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
    Can someone please help me.
    Shanka

    Hi,
    are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
    did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
    During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
    but first verify if other key figures are also having the same issue.
    Thanks
    Ajeet

  • Error while loading Transactional data from NW BW Infoprovider

    Hi,
      I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
    Below is the transformation file content
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = TAB
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=NO
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT= 9999999999999
    ROUNDAMOUNT=
    *MAPPING
    ACCOUNT = 0ACCOUNT
    BUSINESSTYPE = *NEWCOL(NOBTYPE)
    BWSRC = *NEWCOL(R3)
    COMPANYCODE = 0COMP_CODE
    DATASRC = *NEWCOL(R3)
    FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
    GAME = *NEWCOL(NOGAME)
    INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
    PROBABILITY = *NEWCOL(NOPROB)
    PRODUCT = *NEWCOL(NOPROD)
    PROFITCENTER = 0PROFIT_CTR
    PROJECT = *NEWCOL(NOPROJECT)
    TIME = 0FISCPER
    VERSION = *NEWCOL(REV0)
    WEEKS = *NEWCOL(NOWEEK)
    SIGNEDDATA= 0AMOUNT
    *CONVERSION
    Below is the Error Log
    /CPMB/MODIFY completed in 0 seconds
    /CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
    /CPMB/CLEAR completed in 0 seconds
    [Selection]
    InforProvide=ZPCA_C01
    TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&L.xls
    CLEARDATA= Yes
    RUNLOGIC= No
    CHECKLCK= Yes
    [Messages]
    Task name CONVERT:
    No 1 Round:
    Error occurs when loading transaction data from other cube
    Application: ACTUALREPORTING Package status: ERROR
    Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
    ANy Inpout will be appreciated.
    Sanjay

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Issue while loading Master Data through Process Chain in Production

    Hi All,
    We are getting an error in Process chain while loading Master Data
    Non-updated Idocs found in Source System
    Diagnosis
    IDocs were found in the ALE inbox for Source System that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
    Regards
    Bhanumathi

    Hi
    This problem is not related to Process chain..
    u can try this..
    In RSMO, select the particular load you want to monitor.
    In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
    In the next screen you can select the Execute button and the IDOCS will be displayed.
    Check Note 561880 - Requests hang because IDocs are not processed.
    OR
    Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
    Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
    queue thats under outbound processing and click on display the IDOC which is on the menu bar.
    Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
    place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
    (Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
    Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
    to the particular TRFC request for that Idoc.
    OR
    Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
    (For this in RSMO Screen> Environment> there is a option for Job overview.)
    This Data Package TID is Transaction ID in SM58.
    OR
    SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
    Transaction ID.
    In the Status Text column you can see two status
    Transation Recorded and Transaction Executing
    Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
    execute the "Execute LUWs"
    OR
    Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
    for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
    EDIT ---> Execute LUW
    (from JituK)
    Hope it helps
    Darshan

  • Error while loading the data in DSO (Bi 7.0)

    Hi Friends,
    I am working on BI 7.0 , I had run a DTP to load the data in DSO from another DSO.but there was some error in tranformation because of which DTP request didnt terminate with either green or red . then I fixed the bug in TRX and rerun the request .Now there are two requests. Now i deliberately changed the QM Light of the earlier request to Red so that I could run another request. The other DTP success fully loaded the data in Activation Que of DSO . But when I tried to Activate the second request I got a message that request can not be activated because  earlier request is yet to be activated.
    now I tried to delete the earlier request .Neither its getting deleted nor  am I able to change the QM Light to Green .
    What should  I do to activate the Successful request to load the data in DSO.
    puzzeled !
    Anurag

    Hi,
    I have a similar situation....
    I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate  i am seeing  two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
    Thanks,
    Vinay.

Maybe you are looking for

  • Can't boot from OSX cd - Kernel Panic or bad CPU?

    Greetings, All! I've looked at all the articles related to this that I can find, here and on other sites, but have not been able to solve the problem. Here's a list to briefly describe my issue: -Got Prohibitory sign on my MDD Dual 867 when I tried b

  • Protection Modes and Fast-Start Failover

    Oracle Maximum Availability Architecture allows you to set fast-start failover (FSF)to automatically failover to the standby in the event of losing the primary database. One condition of FSF is that it will only initiate if there is a guarantee of no

  • Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5

    Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5? I am having a weird problem, where if I view a video I have uploaded and change the volume, I used the on-screen slider and It changed the volume but it also popped up like I

  • Chapter links as text in a webpage

    I want to create chapter links on page that includes a streaming QT video. I know how to create chapters within the movie but we want the chapters to be available as permanent text in the webpage under the video fragment. Each time a text link is cli

  • Recovery in the device deleted by mistake

    I bought the device with Windows Recovery in the device  deleted by mistake ... Now, do not possess any method of retrieval system What do I do  ???? Please help  ,, Unfortunately, the mistakes expressive