Issue while opening SSRS Report with Oracle as Datasource in Report Manager

I deployed SSRS report in Report Manager but I am unable to generate that report. Am getting following error.
Is it problem with datasource in report manager? I am not able to change the Data source type to Oracle. It is showing Microsoft SQL Server. How can I change it, no other options are coming except Microsoft SQL Server. Please help.
An
error has occurred during report processing. (rsProcessingAborted)
Cannot
create a connection to data source 'TEST_DS'. (rsErrorOpeningConnection)
For
more information about this error navigate to the report server on the local
server machine, or enable remote errors

When I deploy them in localhost, and try to run report in report manager, it is not showing any data source type in drop down list except MS SQL Server. I do not know why it is showing in BIDS and not in report manager!!!
Hello,
Based on my test, I can specify the data source type as Oracle after deploy the report to Report Manager and open the report Data source propertity page. If the report use the shared data source, you should check the specify data source at the Data Source
folder. Please refer to the following screen shot:
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Similar Messages

Issue while opening BI4 webi report instance using CMC on IE8 browser

Hi,
Having issue while opening BI4 webi report instance using CMC on IE8 browser.
Steps to reproduce the error:
1. Login to CMC
2. View Webi History.
3. Open successful instance (For the 1st or 2nd time reports are opening up, from the 3rd time it just freeze the session)
4. After it get freeze we need to close the IE using Task Manager.
Can any one please suggest a resolution for this issue.
Thanks,
Ganesh.M

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Issue while opening webi reports using OpenDoc url in Chrome browser

Hi
We are in SAP BI4.0 SP7. We are facing weird issue while opening the webi report via OpenDoc url in chrome. we are facing the below issue only in chrome and it works perfectly in IE and Firefox.
For the first time the report gets opened properly(when a session is created). If we try to open the same report from the same machine in a different browser tab, report gets opened up without any Tables\charts. We could see only a blank page with just the Report Tab name at the bottom. If we do refresh on the page, the report opens up correctly. We have checked for packet drops and there is no such thing. Is there any setting that we should make to resolve this. Your help is appreciated.
thanks
Gokul

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Performance issue while opening the report

HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.

Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande

Starting AMT FailedI am facing the same issue while opening AMT/Mobile Sale

Hi All,
I am facing a issue while opening AMT/Mobile Sales Appl/System Maintenance. I am getting the error saying 'UI_CORE_APPL_LAUNCH_FAILED_STA'. Could anyone out there please tell me how to resolve this issue?
I checked the UID and PWD under HKEY_LOCAL_MACHINE\SOFWARE\SAP\MSA\MW\secutiry for IDES DB and they are consistent with the ODBC parameters for IDES.
Much appreciated,
Karuna.

Hi All,
my issue is resolved. The problem with my issue was the missing entry in the table SMO_AUTH_SYS. I found the note 687679 and ran the report according to it. With that table SMO_AUTH_SYS was populated with the record. Later i was able to connect to AMT and gave the standard role SAP_AMT_USER and since then i am able to log into MSAA application and also MSY application
My issue is resolved. Thanks for everyone who tried to help me out.
Thanks,
Karuna.

Integrating mod_plsql reports with Oracle Apps. A maddening dilemma.

I'm hoping there is some guru out there that has the perfect solution to this maddening dilemma I'm facing.
The crux of the issue is this.
I've created mod_plsql reports that can accept a session_id with which they can set a user context based on global application contexts set in Oracle applications by users as they log in.
At this juncture, I have not figured out a way to call those mod_plsql reports from Oracle apps using a variable session_id as defined for the user when they logged into apps.
My client want to be able to log into Oracle apps and then go to the mod_plsql reports from the Oracle Apps menu and maintain the user session, so that the mod_plsql reports are run using VPD to constrain access to the data they are displaying to that specific user.
The client does not have Single Sign On installed nor OID.
I had hoped to pass a variable parameter session_id from the defined menu function that would call the mod_plsql url, but I don't see any way to pass a variable there and am becoming convinced that doing so is not an option. Can anyone confirm this?
An alternate option I'm considering that seems like it would work is to create a JSP page that gets called from a menu function. In that JSP page, I would retrieve the session_id set in apps based on the context for the user_id that I could retrieve from fnd_global.user_id and assemble a URL with the session_id that the page would then re-route to the mod_plsql page.
Unfortunately, I'm not versed in JSP.
How hard would it be to create the sort of page that I'm talking about?
Would the JSP need to part of OAF?
Can anyone think of any other options that would take care of the issue I'm dealing with?
Thanks.
Kurt

See answer on other forum: Integrating mod_plsql reports with Oracle apps. Maddening dilemma.

Converting oracle reports with .rdf into bi publisher reports

Hi Gurus,
Iam new to BI Publisher, Could some one help me in converting oracle reports with .rdf into bi publisher reports. Any help is greatly appreciated.

hi,
What you are trying to do?
Can you please elaborate , i guess its an rtf template to pdf / excel
Let me put some points
1) Bi Publisher is a pixel perfect reports ll generate
2) Its completely based on XML data ,based on XML data we can create RTF template from where u can get output as PDF/HTML/EXCEL....
Please go through
1) http://st-curriculum.oracle.com/obe/fmw/bi/biee/r1013/bipub/intro/gettingstarted.htm
2) http://st-curriculum.oracle.com/obe/fmw/bi/biee/r1013/bipub/advance/advance.htm
thanks,
saichand.v

How to integrate Crystal Report with oracle JDeveloper 11g

Hi,
How to integrate Crystal Report with oracle JDeveloper 11g
Regards ,
Amol

I dont think that you can integrate Crystal Reports with JDevelpoer but you can use runtime libraries to your project to get crystal report functionality
To know more please go through supported platforms
[Supported Platforms|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504d0204-681e-2b10-2381-853d88974cfc]
Regards,
Tej

Coherence integration with oracle weblogic portal for Session management

Could you please let me know how to configure coherence integration with oracle weblogic portal for Session management. Its very urgent. please help.

Please take a look at the following web page -
http://coherence.oracle.com/display/COH35UG/Coherence*Web+Session+Management+Module
-Luk

Issue while opening the web analysis reports

Hi,
One of our user is not able to open a web analysis report with an error messages saying
"Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
"Document does not exist or no authorization to open the document"
Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
What could be wrong? Any suggestions please.
The only thing I see here, something wrong with userd ID or password.
Thanks
Prasad

Hi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain

Issue while opening saved web reports

Hi,
The web reports are saved as excel to local machine using 'Export to Excel' fuctionality.
But when the excel report is opened from local machine BW system requests a UID/PWD.
It is a Standard functionality when Hiearchy images are present in the web report.
One solution is to create an anonymous log in for the BEX service or MIME service or create an alias for the BEX service and use the same in the URl. But we can not implement any of these solutions now.
Is there any other solution existing for this like creating a class and create a service for the class and handle this logon issues at the class itself.
Can anybody please let me know how we can handle this?
Thanks in advance..

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Performance issues while opening business rule

Hi,
we're working with Hyperion version 9.2.1 and we're having some performance problems while opening business rules. I analyzed the issue and found out that it has something to do with assigning access privileges to the rule.
The authorization plan looks as followed:
User A is assigned to group G1
User B is assigned to group G2
Group G1 ist assigned to Group XYZ
Group G2 ist assigned to Group XYZ
Group XYZ holds the provision "basic user" for the planning application.
Without assigning any access priviliege the business rule opens immediately.
By assigning access privilege to group G1/G2 (validate or launch) the business rule opens immediately.
By assigning access privilege to group XYZ the business rule opens after 2-5 minutes.
Has anyone an idea why this happens and how to solve this?
Kind regards
Uli
Edited by: user13110201 on 12.05.2010 04:31

This has been an issue with Business Rules for quite awhile. Oracle has made steps both forward and backward in later releases than yours; and they've issued patches addressing, if not completely resolving, the problem. Things finally seem to be much better in 11.1.1.3, although YMMV.

Issue while opening a discoverer workbook

Hi,
While opening a workbook in Disc.Desktop, im getting an error as "Oracle Discoverer Desktop has encountered a problem and needs to close. We are sorry for the inconvenience".
But in Discoverer Viewer i can be able to open and run the reports in the workbook.
Please suggest me in this.
Thanks,
Bopty

Hi,
I have seen this problem and it was resolved by applying a patch, so check that you have the latest patches for your Desktop version.
Rod West

Error while opening excel integration with sap

Hi
While view planning with excel integration in SAP, I am getting error. I am getting this error in CCA and COPA also.
Can anybody help me how to resolve the issue. Please see the meessage
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Procedure
Check first whether you can insert a document from this desktop application as an embedded object in another application. The necessary menu item is usually 'Insert --> Object'. The application then lists all of the OLE document types. Choose the type corresponding to the desktop applciation. If the insertion fails, the error is in the desktop application itself.
This error has various causes. Often, it is caused by activating certain add-ins. Sometimes, the desktop application is wrongly installed. The error should not recur once you have disabled any add-ins or reinstalled the desktop application.
Procedure for System Administration
If you cannot solve the problem as described above, enter a problem message. There are notes relating to how to generate the log file using the program SAPROFFICEINTEGRATIONTRACE.
Regards
Sekhar Datta

Hi ,
I think you are using older version,use microsoft excel 2007 version,then it will opens.
Regrads,
SVS
Edited by: svskumar on Aug 19, 2010 12:18 PM

Integrating mod_plsql reports with Oracle apps. Maddening dilemma.

I'm hoping there is some guru out there that has the perfect solution to this maddening dilemma I'm facing.
The crux of the issue is this.
I've created mod_plsql reports that can accept a session_id with which they can set a user context based on global application contexts set in Oracle applications by users as they log in.
At this juncture, I have not figured out a way to call those mod_plsql reports from Oracle apps using a variable session_id as defined for the user when they logged into apps.
My client want to be able to log into Oracle apps and then go to the mod_plsql reports from the Oracle Apps menu and maintain the user session, so that the mod_plsql reports are run using VPD to constrain access to the data they are displaying to that specific user.
The client does not have Single Sign On installed nor OID.
I had hoped to pass a variable parameter session_id from the defined menu function that would call the mod_plsql url, but I don't see any way to pass a variable there and am becoming convinced that doing so is not an option. Can anyone confirm this?
An alternate option I'm considering that seems like it would work is to create a JSP page that gets called from a menu function. In that JSP page, I would retrieve the session_id set in apps based on the context for the user_id that I could retrieve from fnd_global.user_id and assemble a URL with the session_id that the page would then re-route to the mod_plsql page.
Unfortunately, I'm not versed in JSP.
How hard would it be to create the sort of page that I'm talking about?
Can anyone think of any other options that would take care of the issue I'm dealing with?
Thanks.
Kurt

Thanks for the feedback and sorry it took me so long to reply back. I don't recall seeing the session_id or user_id being passed as part of the function set up, but the rest definitely are. I may be mistaken.
I did come up with a solution that involved the following.
The package was in another schema, but granting execute to apps and creating a synonym in apps allowed for all mod_plsql output to be generated by Oracle's apps ias server.
I could capture the session_id and the user_id using a function referencing icx_session. I build an additional procedure that gets called first by the app so that it can set the session_id and user_id to a context then set a cookie that all subsequently generated pages reference with that info.
That's the short of it and at this point I've long moved on to other issues but it certainly was a relief to get it working. No jsp necessary.
Thanks.
Kurt

Issue while opening SSRS Report with Oracle as Datasource in Report Manager

Similar Messages

Maybe you are looking for