Issue while trying to activate Data Source in BW
Hi,
One of my Master data process chain is failing in Activation step.
Error message - "No InfoProvider exists with name "COSTELMNT_0102_HIER".But this is a data source.Also it is present in R3 and when i am trying to activate it since in Data source its showing --"ACTIVE VERSION-does not exist" & .in SE38 while trying to activate using RSDS_DATASOURCE_ACTIVATE_ALL its saying "THERE IS NO DATA SOURCE WITH THESE ATTRIBUTES"
Although its present in R3 side as well.
Please help.
Thanks
Nilesh Pathak
Hi,
Can you tell me which datasource is that?
If your RSA3 is not giving any records that means that here is no hierarchy defined in source system for that selection.
For example
if you are extracting the plant hierarchy from the source system and in BI infopacakge you selected "26" and extracted the data. If there are records available for 26 in the source system then it will bring.
In your case as you mentioned that there is no data in rsa3 for your selection, then there might be no data mainted in source system. I would recommend you to contanct your functional guys and ask them the hierarchy type in source
Ex: for customer hierarchy i think its "VDH2N" to check in source. But i am not sure what is your hierarchy datasource.
thanks
Srikanth
Similar Messages
-
Error while trying to activate REPLICATE
Hi Experts,
I am getting below error while trying to Replicate Data Source.Can you please help on this-
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_010"
Variable 2.......... "RFC_READ_DESTINATION_TY
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM07Z"
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
Please help.
Thanks in advance
NileshIt's purely connectivity problem .. make sure login credentials are correct! it should allow remote logon from R/3 to BI and vice versa
Please follow the doc..
http://help.sap.com/bp_bw370/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc -
While trying to activat the purchasing data source in LBWE I'm getting erro
Hi,
.while trying to activate the purchasing data 2lis_02_scl source in LBWE Iu2019m getting following error msg.
'Client XXX has status is not modifible'
Regards,
devi,Hi,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
Thanks, -
Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks LanceHi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error while trying to retrieve data from BW BEx query
The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry -
While trying to load data Runtime Err UNCAUGHT_EXCEPTION Except.CX_RSR_X_ME
Hi
We are on BI.7 patch SAPKW70015 BI_CONT 703 - 0007 SAPKIBIIP7 and multi source system BI server. One is for R/3 it is already working and another is for new IS Retail.
While trying to load data to inventory (Z-cube) for first time in production system we get the following error :
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 73
of the (Include) program "LRRMSU13".
The program "SAPLRRMS" was started as a background job.
Line SourceCde
43 BREAK-POINT.
44 SET EXTENDED CHECK ON.
45 ENDIF.
46
47 IF i_abend EQ rs_c_false.
48 *... Nachricht an den Message-Handler schicken
49
50 DATA: l_type TYPE smesg-msgty.
51
52 *... S-Meldung wenn kein Handler initialisiert
53 IF g_active IS INITIAL.
54 l_type = 'S'.
55 ELSE.
56 l_type = 'W'.
57 ENDIF.
58
59 CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
60 EXPORTING
61 i_class = 'BRAIN'
62 i_type = l_type
63 i_number = '299'
64 i_msgv1 = i_program
65 i_msgv2 = i_text.
66 ELSE.
67 DATA: l_text TYPE string,
68 l_repid TYPE syrepid.
69
70 l_repid = i_program.
71 l_text = i_text.
72
>>>>> RAISE EXCEPTION TYPE cx_rsr_x_message
74 EXPORTING text = l_text
75 program = l_repid.
76 ENDIF.
77
78 ENDFUNCTION.
The other data loads are working fine in the production system.
We searched a lot on the forum and got various solutions But none of them are working fine for us.
Please suggest.
Thanks you for your help.
Ramana PAre you trying this load manually or through process chain?
if process chain , the file should be placed in application server.
chk if the file is closed b4 triggering the infopack.
try loading other flat file load for different datasource and chk.
Ramesh -
Object variable or with block variable not set- while trying to submit data
Hi Gurus,
Could you share me the solution to resolve the issue?
I am getting an error "object variable or with block variable not set" while trying to submit data through an Input schedule.
I am working on SAP BPC 7.5 NW and using MS Excel 2007.
I can log in to BPC Admin and excel with my user id and password.
I checked my security profile and i have the submit data task in my task profile. My all other Input Schedules are working very well. Only one of the IS is causing this problem. The same input Schedule when saved as Dynamic Template it works well and data is sent successfully.
Regards,
KumarMGHi Kumar,
This might be incase you have some special character like & in the input schedule template. you need to remove the special character in that case.
Hope this resolves your issue.
Rgds,
Poonam -
DBIF_REPO_SQL_ERROR while trying to activate ENVIRONMENTSHELL for BPC 10.0 NW on HANA
Hi experts,
I'm getting this short dump "DBIF_REPO_SQL_ERROR" while trying to activate the ENVIRONMENTSHELL(UJS_ACTIVATE_CONTENT) for BPC 10.0 NW on Hana database :
Category Resource Shortage
Runtime Errors DBIF_REPO_SQL_ERROR
Short Text
SQL error "-10760" while accessing program "CX_SY_OPEN_SQL_DB=============CP" part "LOAD".
What happened?
Database error text: "Memory allocation failed."
Error analysis
Database error text: Memory allocation failed.
Triggering SQL statement: "CX_SY_OPEN_SQL_DB=============CP "
System environment
SAP Release..... 740
SAP Basis level 0005
Application server... vSAPPRD
Network address...... 172.16.10.230
Operating system... Windows NT
Release.............. 6.2
Hardware type....... 4x AMD64 Level
Character length..... 16 Bits
Pointer length........ 64 Bits
Work process number... 9
Shortdump setting. full
Database server... hana-prd
Database type..... HDB
Database name..... PRD
Database user ID SAPPRD
Terminal.......... Maha-HP
Character set C
SAP kernel....... 741
Created on....... Mar 21 2014 17:31:58
Created at....... NT 6.0 6002 x86 MS VC++ 16.00
Database version SQLDBC 1.00.60.0379371
Patch level....... 26
Patch text.......
Database............. HDB 1.0
SAP database version. 741
Operating system... Windows NT 5.1, Windows NT 5.2, Windows NT 6.0, Windows NT
6.1, Windows NT 6.2, Windows NT 6.3
Memory consumption
Roll.... 0
EM...... 44600400
Heap.... 0
Page.... 49152
MM used. 33089488
MM free. 4949248
The program interrupted was SAPLSADB
Thanks
MahaHi Maha,
Please check the versions of:
HANA server
HANA client (on HANA server)
HANA client (on the PAS)
SAP Kernel (both the generic and HDB specific files)
The versions between them should be in sync.
My issue with the error: " CX_SY_OPEN_SQL_DB=============CP " is resolved by applying the latest SAP Kernel 7.41 Patches which is currently patch level 43.
Good luck!
Regards,
Mike -
LPX-00601: Invalid token in: err while trying to read data from xml
Hey ,
While trying to read data from xml i got err:
LPX-00601: Invalid token in: 'path'
the proc. i'm using to read data from the xml is:
procedure read_xml_file_test (in_filename in varchar2)
is
my_dir varchar2(20) := 'XML_DIR;
cur_emp2 number:=0;
l_bfile BFILE;
l_clob CLOB;
l_parser dbms_xmlparser.Parser;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_nl2 dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_n2 dbms_xmldom.DOMNode;
l_temp VARCHAR2(1000);
v_errors internet_clients.errors%type;
src_csid NUMBER := NLS_CHARSET_ID('UTF8');
dest_offset INTEGER := 1;
src_offset INTEGER := 1;
lang_context INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
v_count number := 0; --total records
v_count_s number := 0; -- sucsess record
v_count_f number := 0; -- failed record
v_flag varchar2(1);
v_char2 varchar2(1);
v_l1 VARCHAR2(255);
v_l2 VARCHAR2(255);
v_l3 VARCHAR2(255);
v_l4 VARCHAR2(255);
v_l6 VARCHAR2(255);
BEGIN
l_bfile := BFileName(my_dir, in_filename);
dbms_lob.createtemporary(l_clob, cache=>FALSE);
dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);
dbms_lob.close(l_bfile);
-- make sure implicit date conversions are performed correctly
dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');
-- Create a parser.
l_parser := dbms_xmlparser.newParser;
-- Parse the document and create a new DOM document.
dbms_xmlparser.parseClob(l_parser, l_clob);
l_doc := dbms_xmlparser.getDocument(l_parser);
-- Free resources associated with the CLOB and Parser now they are no longer needed.
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
-- Get a list of all the nodes in the document using the XPATH syntax.
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
-- Loop through the list and create a new record in a tble collection
-- for each record.
FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
l_n := dbms_xmldom.item(l_nl, cur_emp);
cur_emp2:=0;
loop
v_count := v_count + 1;
begin
-- Use XPATH syntax to assign values to he elements of the collection.
dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
exception
when others then
null;
end;
exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
END LOOP;
end loop;
-- Free any resources associated with the document now it
-- is no longer needed.
dbms_xmldom.freeDocument(l_doc);
--remove file to another directory
--COMMIT; -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows" clause.
/*EXCEPTION
/*WHEN OTHERS THEN
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(l_doc);
null;
ROLLBACK; */
END;While trying to execute this i got:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
ORA-06512: at line 1
i guess i mised somthing at the line
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetFieldsNameResponse xmlns="http://tempuri.org/">
- <GetFieldsNameResult>
- <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
- <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
- <xs:complexType>
- <xs:choice minOccurs="0" maxOccurs="unbounded">
- <xs:element name="FRM_GANERIC_PROP">
- <xs:complexType>
- <xs:sequence>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
- <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
- <DataSet_FRM_GANERIC_PROP xmlns="">
- <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
<L1>val1</L1>
<L2>val2</L2>
<L3>val3</L3>
<L4>val4</L4>
<L6>val6</L6>
</FRM_GANERIC_PROP>
</DataSet_FRM_GANERIC_PROP>
</diffgr:diffgram>
</GetFieldsNameResult>
</GetFieldsNameResponse>
</soap:Body>
</soap:Envelope>I Guess it somthing that have to do with node definition ,
but i have tried so many combinations and none ot those worked for me.
i'm deeply stuck here.
What do i miss here?
THANKS yair
Edited by: yair_k on 02:30 14/10/2010Hey , after got a lot of success with the xml reading part , i wonder if you
can help me with a problem while trying to reading that xml from a web service.
i use a procedure as followes:
FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
RETURN CHAR
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_a_ns VARCHAR2(32767);
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return VARCHAR2(32767);
BEGIN
l_wsdl_url := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
l_namespace := 'http://tempuri.org/';
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
<GetFieldsName xmlns="' || l_namespace || '">
<user>' || in_username || '</user>
<password>'|| in_password || '</password>
</GetFieldsName>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
dbms_output.put_line(l_return);
RETURN l_return;
END;but when i run it i got message:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
regarding the line:
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
So , i deeply stuck here!
my web service description is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
- <s:element name="GetFieldsName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFieldsNameResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_ReadedResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="GetFieldsNameSoapIn">
<wsdl:part name="parameters" element="tns:GetFieldsName" />
</wsdl:message>
- <wsdl:message name="GetFieldsNameSoapOut">
<wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
</wsdl:message>
- <wsdl:portType name="ServiceGetpublisherTableSoap">
- <wsdl:operation name="GetFieldsName">
<wsdl:input message="tns:GetFieldsNameSoapIn" />
<wsdl:output message="tns:GetFieldsNameSoapOut" />
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
<wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
<wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ServiceGetpublisherTable">
- <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
<soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
<soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
hope you can help me with this.
regards
yair -
An error occured while trying to read data
Hi RoboHelpers,
While opening my main project today (large project w/ thousands of topics) my project froze twice and wasn't responding, so I forced it to close via Task Manager and deleted the CPD file, thinking it was the culprit.
I then got this error when I tried to reopen the .XJP file:
"An error occurred while trying to read data from
<D:\Hg\PcdmisQA\Pcdlrn\CoreHelp\13_hardware_topics\13_hardware_topics.fpj><1>."
I clicked OK to get past this error, and now my htms are not appearing inside the Topic List for 13_hardware_topics and the TOC links show that the topics don't exist. But the .htms do exist inside the actual directory in Windows.
I think I can fix this by importing the .htms inside 13_hardware_topics, but I'm not sure why it happened in the first place. Is there a way to just fix the .fjp file instead--if this is indeed the problem?
My 13_hardware_topics.fjp structure looks like this (sorry for the post length):
<?xml version="1.0" encoding="utf-8"?>
<rhpml majorversion="2" minorversion="0">
<folders/>
<topics>
<topic>
<name>Tool_ID.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Hardware_Introduction.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>List_of_Available_Tools.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Tool_Type.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Understanding_the_Probe_Utilities_dialog_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Probes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_File_Name.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Optical.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_the_Quick_Fixture_Dialog_Box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>print_list.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Defining_Machines.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_LOADMACHINE_Command.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Ball.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Removing_the_Animated_Machine_from_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>collision_tolerance.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Optical_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Specifying_Collision_Tolerances.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Using_Existing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_4_-_Begin_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_3_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_8_-_Measuring_Port_2.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_7_-_Measuring_Port_3.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Displaying_Existing_Machines_in_the_Graphics_Display_Window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Deleting_the_Machine.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Adding_Custom_Fixtures.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>With_Averaging.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Optical_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Fast_Probe_Mode.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>X_Y_and_Z_Center.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Delete_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ScanRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Thickness_of_the_ball_tip.htm</name>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Shank_Vector_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>edit_probe_components.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Edit_Tool.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<name>To_delete_a_wrist_angle.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Probe_Setup.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Measure.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>PrbRdv.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>New_Angles_List_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Global_Used.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Individual_Angle_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Barrel_Shank_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>calibration_date_and_time.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Equally_Spaced_Angles_Data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Disk_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>use_unit_calibration_data.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>dmis_label.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>add_angles.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Notes_on_the_Add_Angle_option.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Working_with_the_Angle_Grid.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>available_tip_types.htm</name>
<name>calibration_date_and_time.htm</name>
<name>Results.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Spherical_Tool_and_Ball_Tip.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Reset_Tips.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Previewing_your_Probe_Configuration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>User_Defined_Calibration_Order_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Diameter_Length.htm</name>
<name>Use_Wrist_Map_If_Available_check_box.htm</name>
<name>Probe_Description.htm</name>
<name>List_of_Available_Tools.htm</name>
<name>Probe_File_Name.htm</name>
<name>use_trax_calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Use_Partial_Calibration.htm</name>
<name>Probe_Description.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>autocalibrate_probe.htm</name>
<name>Search_Override_I_J_K.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Disk.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_ACR1_Probe_Changer.htm</name>
<name>Step_1_-_Select_the_FCR25_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>example_printout.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>defining_probe_changers.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Calibrating_the_CW43_Probe_Changer.htm</name>
<name>Optical.htm</name>
<name>example_printout.htm</name>
<name>To_Display_the_Probe_Changer_in_the_Graphics_Display_window.htm</name>
<name>defining_probe_changers.htm</name>
<name>Inserting_Quick_Fixtures.htm</name>
<name>Shank.htm</name>
<frameset>0</frameset>
</topic>
<topic>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Additional_Information_on_the_Machine_s_Axes.htm</name>
<name>Step_5_-_Prepare_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Migrating_Part_Programs_Between_Machines_Using_PH10_and_Tesa_Star_M_Probes.htm</nam e>
<name>Probe_Setup.htm</name>
<name>Selecting_or_Creating_a_Machine_for_Display.htm</name>
<name>Step_6_-_Measuring_Port_1.htm</name>
<name>Step_9_-_Review_Calibration_Results.htm</name>
<name>Quick_Fixture_Mode_s_Mouse_and_Keyboard_Commands.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<name>Step_6_-_Measuring_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Inserting_and_Removing_Quick_Fixtures.htm</name>
<name>SP600__Step_3_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Selecting_the_No_Machine_Item.htm</name>
<name>Deleting_the_Machine.htm</name>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</name>
<name>SP600__Step_6_-_Take_the_Third_Manual_Hit.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SCP600__Step_2_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Showing_an_Animated_Probe_Changer.htm</name>
<name>ACR1__Step_1_-_Select_the_ACR1_Probe_Changer.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</name>
<name>ACR1__Step_3_-_Define_the_Mount_Point.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_4_-_Define_Ports.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_5_-_Prepare_for_Calibration.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_6_-_Measure_Port_1.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_7_-_Measure_Port_8.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>ACR1__Step_9_–_Measuring_Datum_Sphere_with_PEM_Extension(s)_(optional).htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>SP600__Step_4_-_Take_the_First_Manual_Hit.htm</name>
<name>Step_1_-_Select_the_SP600_Probe_Changer.htm</name>
<name>ACR1_Step_10_Review_Calibration_Results.htm</name>
</topics>
</rhpml>
Thanks,
JaredHi Jared.
I don't know if this is at the root cause of the error but I see that the closing </name> tag has a number of instances where there is a spurious space inside it:
<topic>
<name>Additional_Information_for_Creating_Multiple_Arm_Machines.htm</ name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Additional_Information_on_the_Machine_s_Home_Position_area.htm< /name>
<comments></comments>
<frameset>0</frameset>
</topic>
<topic>
<name>Creating_a_Relationship_between_the_Machine_and_the_Part.htm</n ame>
<comments></comments>
<frameset>0</frameset>
</topic>
There are others.
The RoboColum(n)
@robocolumn
Colum McAndrew -
An error occurred while trying to save data to rhbag.apj
Opening a RoboHelp 8 project in new RoboHelp 11 and receive the following error:
An error occurred while trying to save data to rhbag.apj...
I can see this file in the project but many of my baggage files (.pdfs) are missing and I am not able to add them back into the project. I select New Baggage file and select the file to add, however the file is not added and no other error is received.
Any assistance is greatly appreciated.Is the file writable or set to read only?
Probably, the rhbag.apj got corrupted. If you open it up with notepad (or other text/xml editor), what do you see? -
Facing issue while trying to disable automatic discovery of devices through Apple Bonjour
Hi All,
I am facing issue while trying to disable automatic discovery of devices through Apple Bonjour.
Background: Whenever our application is in running state, devices are automatically discovered if it connects to PC. We are using Apple Bonjour's auto discovery technology( mdnsresponder ).
We are registering a particular service type by using DNS API "DNSServiceRegister". Service type is getting registered properly and we are able to discovered that particular type of device.
Platform: Windows 7.0 / MAC 10.8
Issue:
But we are facing issue while trying to disable auto discovery of a device programmatically. i.e, unregistered a service reference programmatically from our windows application.
To unregistered a service we are using "DNSServiceRefDeallocate" DNS API. But looks like it is not working properly.
Is this DNS API “DNSServiceRefDeallocate” is correct one to unregistered the service?
Here is the step by step procedure that we are following to de-allocate a service reference:
1.Browsing / Query a service by using service type to get service reference (DNSServiceRef).
2.Get reference socket FD by using DNS API "DNSServiceRefSockFD".
3.Select a socket by using "select" API.
4.Close the socket that we got from step 2 by closesocket().
5.Delete the service reference by using DNS API "DNSServiceRefDeallocate" and service reference from step 1.
Are we missing any step to unregistered a service?
Regards,
GoutamOriginal problem I noticed was that regular websites I go to (such as msn) were only partially downloading. I could see the text on the site but no pictures or videos. All web surfing was extremely slow. When I would go to a site such as man I would see another address in the lower left corner for "ads1.msads.net" or "cdn.optimizely.com" that is was trying to connect to. I tried using all three of my browsers (firefox, safari, chrome) and got the same response on all browsers. After I spent some time researching the issue I decided I probably had a adware/malware problem so I decided to try adwaremedic.com. I could also not access that site along with thesafemac.com or apple.com. I was also getting the same response on my other devices (iPhone, iPad, and a mac air). I could not access any of these sites on any of my devices although I could get to almost any other site although it was very slow. At that point I decided to unplug the router. I also did a number of other things before then to try and manually get rid of any adware. Eventually I got msn back working, apple.com, and the speed was much faster. But, I still can not access adwaremedic and thesafemac.com. I could access these on my phone with 3G but not on my wifi. This is where the problem still stands. I am sure I still have some adware on my computer and need to find a way to remove it. I am no techie so the complicated manual fixes are difficult for me to do.
-
i bought a iphone 5s from gumtree. While trying to activate it i realised there was an account linked to it through an apple id. it doesnt say the phone is in lost mode and it still has warranty. am i able to get a fix from apple?
unfortunately - no
if the device is on ios 7.1 or above there's two things.
1) the device may be restored to factory settings - but the phone can't be activated. imei unlock is different to Iphone activatio. - your friend unlocked it to use any sim in any country. iOS 7 forces you to restore the phone and reimpit the original icloud login. This can only be solved if you a)forgot the login/changed it, and can prove to apple youre the owner; b) to get the original owner to deauthorize his account associated with the phone, on his/her computer.
2)if there's also a Passcode lock on the phone, and the last registered sim doesn't work (in the case of a stolen phone) - then it's impossible for you to do anything, full security = restore will lead to activation lock immediately. There's no bypass to it, the fake videos online only allow a bypass if the device was a 'jailbrokem' one - which would invalidate apple trying/ever wanting to help you.
if you know who the phone belonged to previously (usually comes up with the icloud username on it) then you can ask them to deactivate it.
otherwise, you have what we call - a brickb- won't even work as a super iPod touch
my iphone was stolen on sat in prague - white, 32 gb iphone 5 - if it's mine, I'll have it back please just incase -
I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?
Define "mentioned steps."
See this:
iOS: Troubleshooting FaceTime and iMessage activation -
While trying to activate iphone 3gs get an error message saying " your iphone could not be activated because the activation server is temporarily unavailable" when will they be available, and is anyone else having this problem?
yes i am! did u get it fixed?
Maybe you are looking for
-
Ease of use from ver 2 to ver 8
A long time ago I bought Elements Ver 2 and could not understand it all and returned it. I am looking for a program to edit photos like fun stuff,,adding people to other picts, changing picture sizes for a group of picts (pixels/size/names/etc), ch
-
Acrobat 8.1 vs. 9.0 with FrameMaker 8.0
We're upgrading to FrameMaker 8.0. We're also upgrading Acrobat. Turns out we have some spare licenses for Acrobat 8.1. Is there any advantage to 9.0 worth the upgrade cost?
-
Exchange rate differences not found in CKM3
Hi ML Experts, PO has been raised with foreign currency. At the time of GR, the same price has been paid at the same exchange rate. Only the other charges like custom and CVD charges were paid in an increased exchange ratio. Hence, all these exchange
-
Hi all, any suggestions as to a good .avi to dvd converter? I only have a couple to do so preferably free. Thanks Basiccook
-
Extending recording time/length for each track?
Hello Any and Everyone! I would like to know if someone can help me out with what I am to do about extending the recording time for each track? I have found nothing as of yet that explains to me how to do it in the manual or in the application itself