Issue with 2504 WLC and 2602 AP. need help please.

Somehow the AP does not associates with the 2504 controller.
What could possibily be the issue.
Thanks in advance.
Anyway,  Here is the log from the AP.
AP log
===========================================================
*Mar  1 00:30:35.551: %CAPWAP-5-DHCP_OPTION_43: Controller address 192.168.120.4 obtained through DHCP
*Mar  1 00:30:35.551: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'SNGNY-WLC1'running version 7.0.220.0 is rejected.
*Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.
*Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.
*Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Mar  1 00:30:44.551: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 192.168.120.4
===========================================================
show version output from the Access Point
=========================================================
AP0006.f6ec.be2a#show ver
Cisco IOS Software, C2600 Software (AP3G2-RCVK9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 00:07 by prod_rel_team
ROM: Bootstrap program is C2600 boot loader
BOOTLDR: C2600 Boot Loader (AP3G2-BOOT-M) LoaderVersion 12.4(25e)JA1, RELEASE SOFTWARE (fc1)
AP0006.f6ec.be2a uptime is 33 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
--More--
*Mar  1 00:33:46.071: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Mar  1 00:33:46.171: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.120.98, mask 255.255.255.0, hostname AP0006.f6ec.be2a
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP2602I-A-K9    (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory.
Processor board ID FGL1704ZC0Q
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.4.1.37
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:06:F6:EC:BE:2A
Part Number                          : 73-14588-02
PCA Assembly Number                  : 800-37899-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC165188Y4
Top Assembly Part Number             : 800-38356-01
Top Assembly Serial Number           : FGL1704ZC0Q
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP2602I-A-K9  
Configuration register is 0xF
========================================================

Blake's right.  Your WLC is running 7.0.X code which does not support the AP2600.  Check the Release Notes and look under Software Release Support for Access Points to determine what suitable firmware your WLC can support your AP.

Similar Messages

  • Video Playback ISSUE WITH VISTA!!!!  NEEDED HELP BADLY!!!!!!!

    I am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.
    -Nick.

    Do you have a SATA hard drive? I have the same problem you describe when trying to play videos in iTunes. Do the previews of music videos on the iTunes web site play OK? If they do you probably have the same problem with SATA HD and iTunes incompatibility. Not sure who is going to fix that problem and when. I have found one fix that worked for me. Copy your video(s) to a flash drive and then play them from there. It's a workaround and you shouldn't have to do it but it does allow you to watch the videos.

  • Problem with lacie HD and airport extreme need help!!

    Let me first off tell you what my set up is powerbook with the latest 10.4 os, airport extreme software up to date, a Lacie 500gb usb hard disk connected to the airport extreme, i've got an apple TV connected to the extreme via ethernet, I also have a macbook pro using the airport.
    The problem i've got is the powerbook is the main hub between the external hard disk and the apple tv but it's started to not hold a connection to the lacie i keep having to tell the powerbook to connect then ok it with a password and as a result i have to keep re syncing things like movies and photos to the apple tv.
    Is there a way to automatically connect the powerbook to the hard disk with out it needing a password if not can anyone come up with an explanation as to why the disk has started to unmount after being fine for weeks?
    My macbook pro has no problems keeping a connection.
    Thanks in advance

    I just found out something today which might help you Daniel, but that doesn't solve our problem in a "classic" way...
    So I was very obsessed by the fact that Windows Vista could actually access the shared HD with Bonjour and with a lot of testing I found this : let's say my macbook pro was off, if I would access the HD with Vista and then open up the MacBook Pro, then there would be no problem.
    Eventually I found out that the problem really came from the fact that my WD MyBook 1Tb external drive was putting itself on standby after a while (which is a good thing actualy). When I was trying to connect to the drive while it was on standby with Finder, it would try to connect forever... however, it would physically wake up the external drive (I could tell by the sound)... but too late for Finder, and no way to access it other than rebooting the Mac... OR crashing Finder (Apple Menu - Force to quit). Then the Finder restarts automatically and the drive works.
    I really don't like this solution (having to crash finder) but it works.
    PLEASE if someone has a better way, let me know !!!

  • Browser on 8310 SmartPhone Edge comes up with Critical Error and cannot be used, help please?

    Hi, my name is Sater and I'm the lone I.T. guy for a small medical device company (about 40 ppl) based in Fremont, CA.  So...
    All of a sudden my vp of marketing comes in and says that he can't use the Browser function on his BB (8310 SmartPhone Edge) anymore.  Naturally I'm intrigued, but this is a very strange error that pops up.  It doesn't matter how many settings I go in and change, there's no budging it.  Here is what it's telling me...
    "Unable to connect to the selected Mobile Data Service, please try again later.  If the problem persists please contact your administrator."
    So I decide after about an hour of messing with settings and getting nowhere to call AT&T support.  They said when that error comes up with "please contact your administrator", it's because it can't connect to the BES server anymore and that we would have to consult that with whomever runs that server.  To give you a little background, we went through an outsourced Exchange provider called TheMessageCenter.com. They were alright, but my VP of R&D was pretty bent by some of the lack of customer service skills they presented to him when he was in an email crisis.  Needless to say one of the very first missions I ever had at this place was to find a new email solution and integrate the migration.
    So basically AT&T said they couldn't do anything and that I would have to contact our outsourced providor (TheMessageCenter.com, since we ran both Exchange and BES through them before we switched) back to get the settings cleared off the BES server hosting his phone Pin and info.  I called them up, (mind you we had been away from TheMessageCenter.com for a good couple weeks now) and they claimed they had no other active processes running for our company anywhere on their BES servers or frankly, ANYWHERE lol.  So naturally he's looking at me to fix this, and I am seriously stumped!  Should I do some kind of Factory reset?  If so, how can I load all his contacts/settings back the way he had it?  Any help on this matter, (especially if treated as urgent... I know you hate to hear that, but I said it for all you I.T. guys haha) would be GREATLY appreciated!!  Thanks
    Respectfully,
    Sater K.
    Systems Administrator
    SpineView Inc.
    Fremont, CA 94539

    Hi,
    The browser icon uses the BES service, unless you have signed up for the BIS ONLY servcie, wherein you get access to the internet through RIM's servers.
    Since your servcie is a BES servcie the access to the internet is through the BES.
    The MDS is a service running on the BES to authenticate you. (and thus the error)
    So, No BES = No  Internet access using the Browser icon!
    So, I need a little clarificatuioin. 
    Did you move from one BES to another? Or did the user simply switch carriers?
    It sounds as if you moved from one third company BES to another third company BES... Is that right?
    If so then contact your New BES and ensure that they allow ppl to use the MDS servcie for internet access (Most companies charge extra for that feature! - Because they can!).
    If your hosting the BES (Now), and it was Themessagingcentre.com before, then you need to Reactivate the Handset for the  new BES. I have a feeling that he is now getting the emails through the BIS service and the handset wasnt wiped and so it is stil trying to access the old BES....
    So can you please give details such as:
    BES - where was it hosted:
    BES - where is it now hosted:
    NEW BES: Is the MDS service enabled and can people currently use it to browse?
    Have you tested with other BB handsets to ensure you/user  are clicking the same icons on both handsets (most ppl do different things to access in their own way, so simply asking them if it works doesnt help!)
    The alternative is to use the expensive WAP browser. It will work but will rack up huge charges.
    Let us know how it goes...
    Checked out my Blackberry FAQ's and Links to Needed Articles here
    http://darkeen.homelinux.com/index.php/Blackberryfaq

  • Major Issues with installing 4tb internal. Really need advice please

    In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
    Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
    The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
    Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
    Any info would be greatly appreciated...
    Deskstar 4tb internal info which is installed in Bay 2
    3tb Seagate which I trying to retire and transfer from.
    Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
    (Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).

    What OSX version?
    Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
    http://forums.macrumors.com/showthread.php?t=1661024
    http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive

  • Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!

    I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
    I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
    Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
    So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
    So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
    I have the gateway 2WIRE model(2701HG-B) modem/router.
    Is there something wrong? what do I have to do to make this work?

    Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.

  • Caching Issue with Java Portal....Need Help ASAP!

    We are deploying a JAVA & .NET enviornment. We have a Java Portal Server that connects to the .NET enviornment. We seem to have a problem with the caching on the JAVA portal...any help you could provide would be much needed!!

    We are running Apache 2.0.48 with TomCat 4.1.18LE using JK2 as a conduit between them. We are not using mod_cache at all. we are using mod_proxy in the Apache Server. We have disabled caching in Tomcat:<Host name=..................... <Context path=............................ <Logger className=........................... <Manager className=.............................. <Resources cached="false" caseSensitive="false" /> This didn't seem to help the problem. Now am wondering if the browser is caching even though it's set to get a new page each time. The symtoms are: create a community page edit the pagecreate a portletfinishthe portlet shows upfinishfinishportlet is not on the pageclick refresh......the portlet is on the page.edit the communityedit the pagethe portlet is not on the edit pageclick refreshthe portlet is on the page..... regards and respect... Rod

  • Issue with weekly pack and no one can help me !!

    Hi there, on Thu. 9th of july I top up my PAYG line, for 5GBPOn 17th July it was supposed to start automatically a new week cicle but it has not. I wait till mid day then as anyway was showing I had still 4GBP I decided to call 150 to have support but unfortunatly there is no direct option to have a quick help and basically I had to end the call.I decided to top up again at in the webpage was says there was no credit enough and I did it.Unfortunatly I have been charged for that call and I believe it should have to be included in my weekly calls.I asked support to the shop and they suggest me to call 150 serching for billing department, but there are no option to explain my issue to someone, neither in the web page.Can someone contact me and try to solve this issue ? Marco.

    Hi XRaySpeX, probably I am not able to explain myself in a correct way. I will try again to point out the issue.
    On Thursday 9th of July I top up my number £5, so for next 4 weeks should have to restart my plan every Friday, discounting automatically £1. But then the next week on Friday, I could not connect my phone to check my email, and the issue was I had no credit enough to start the new pack. I check it on web page but my balance was £4,01. So basically I believe it was just a technical issue related to EE system. I wait until mid day and then I tried to call 150, as internet was not working yet, and for this call I have been charged £0.30 Finally I decided to try to top up other £5 and after that it worked, but then my balance was  £8.71.
    So I believe if I have a balance of £4.01 I shouldn't have to be charged as I have 10 minutes call included in this plan, is that right ? Then I just want to get refunded £0.30 What do you suggest me to do ?
    Marco.

  • Something is not letting me connect with adobe for help,its controllig my browser and keyboard,i need help please.

    @

    yes I was trying to shart and trying to connect,but I couldn't,something wont let me,its keeping me away from adobe,it don't want adobe to help me,if possible please help me,thanks hasmat ali.
    Sent from Windows Mail

  • Driver issues 0768 6vg at my wits end need help please

    Hi
    well im at my wits ends with this
    need some help if pos
    I've upgraded my lenovo n100 0768 6vg to windows 7 ultimate but am having lots of probs finding drivers for a few things
    everything works fine otherwise though ( well so far at least )
    not sure what the drivers are 2 just show as a system board device and the other is the finger print reader driver
    if anyone has had this problem or knows were I can find out the the full list of drivers or a device manager over view pic would be help at least I could then work out what's missing or if there is drivers wrong as well to sorts them out at the same time
    have tried the system updater but it don't seam to find anything even though it did correctly detect my system in the first place and the o/s in use
    may thanks in advance

    Thanks Duck3
    spot on did have a look though most of those but couldn't make heads or tales of it was a late night
    worked like a charm device drivers turned out to be the 1394 firmware forgot I even had one on there lol
    other was the authentec driver should have realized it as never forget the pop up window every time you boot up
    anyways
    so all sorted
    many thanks for the help 

  • Problem with application !!!Urgent need Help please!!!

    Hello i am trying to make a 2d sprite engine. I have a serious problem. When i start the application sometimes the screen is just gray. and no matter how long i leave it it just stays gray however every now and again if i run it works fine. this is realy troubling me i cant understand it.
    I am try to use a double buffering strategry and also am storing images on accelerated memory if someone could please help me this would be a great help

    ...you will have to post some sample code, i really can't make heads and tails of it with the given information...

  • Text blocked out with adobe reader 9.20. Need help PLEASE!?!

       Whenever I open a PDF much of the text is blocked out.  Can anyone please help?

    Can you describe what you mean by "blocked out"? Is it a gray box where the text should be or is it something else? If it IS a gray box, are you sure it is text and not an image? Does it happen with a few particular PDF's or does it happen in all of them?

  • Internet and emails- i need help please!

    hi,
    when i try to get onto the internet on my phone via wifi a message comes up saying 'unable to connect to the internet, please try again later. if the problem persists contact your service provider.' this has been happening for the last three days.
    also, i cannot open an email account, it says something about a enterprise account but i dont know what this means.
    if somebody could help me that would be extremely appriciated!!
    many thanks.

    give your carrier a call and enquire what blackberry packages they offer on PAYG

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • Issue with Information broadcasting and pre-cal server in SAP BI

    Hi Experts,
    I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
    I have 20 employees every month I need to send workbook via e-mail from information broadcasting.  The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
    because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
    I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
    like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
    Below log In pulled from pre-cal server
    Can you please tell what could be the problem.
    Successful job
    3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
    3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
    3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
    3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in  thread 3
    3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
    3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
    IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:44 AM (0) -> Excel based operations  finished.
    Failure job
    3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
    3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    .xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
    3/10/2011 10:23:44 AM (1) -> PID of Excel process:  "2544"
    3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
    3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
    3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
    BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
    3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    Thanks in advance
    Narendra

    Hi Ravikanth,
    Thank you very much for the reply
    I went into RSPRECADMIN and clicked on 'Display Current Queue'.  There we have 3 sections
    1) Queue Overview of Open Precalculations
    I can see this section is always blank after running IB also
    2) Queue Overview of Current Precalculations
    In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
    If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
    Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
    3) Queue Overview of Proccessed Error-Free Precalculations
    All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
    I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
    Can you please help me further to trace the error.
    Thank you
    Narendra

Maybe you are looking for