Issue with a load from R3 to BW 3.5

Hi Guys,
We are having an issue here with a load from R3 to BW 3.5 to an ODS and
a transactional infocube.
In a daily basis we are running loads to BW from R/3 infosets and all
of them but one loads fine.
The one that is having problems is actually the one that loads more
data, therefore the infopackage is divided into two infopackages.
In the update rule of the first ODS we are running an initial routine
in which we are doing a RSDRD_SEL_DELETION (selective deletion) of the
data to be loaded to both the ODS and the infocube, and is actually
here where we got the core dump.
Our first assumption was that maybe there was any yellow request in the
transactional infocube avoiding the selective deletion but we have
discarded this.
We think that, as the only one failing is the one that divides into two
infopackages, the problem might be that at the moment that the first is
triying to delete the second one is loading data into the ods and there
we get the dump.
The question here is ¿Could this be the problem? ¿How could we
workaround this if this is the case?
Thanks for any suggestion.

Hi,
Be carefull on ODS activation, if you're using 2 infopackage and/or deleting data from an ODS which is lock for an activation, you'll occurs a dump.
Check SM12 / ST22 / SM21 and job logs in SM37.
And if pb still occurs for a load, debug it in start routine.
Regards,

Similar Messages

  • Issue with delta load from R/3 to BW

    Hi frnds,
    There is a standarded D.S  2LIS_05_ITEM in R/3. Evereday We extraceted data from R/3 to BW based on this standard Data Source with delta load.There are two fields ZX and ZY in BW ,some times the data haven't extracted for this 2 fields in BW with the delta update.But some times this 2 fields properly extracted in to BW with the same delta update.
    Why is it happen like this ? Please give some inputs on this.
    Regards,
    Satya.

    Hello,
    if its a standard field then its getting populated in correct way.
    if its custom field then you need to analyze the records for which its getting populated and for one which its not.
    Quite possible that some cutomization in CMOD results in this behaviour.
    Also,check underlying tables to see the correct values.
    Regards
    Ajeet

  • Issue with Data Load from R/3

    Hi,
    I have created a generic data source in R/3 based on the option Extraction from SAP Query. the SAP Query (Infoset) created in the TCODE SQ02 is based on the tables BKPF and BSEG. I have generated a Data source on this and successfully replicate dinto BW but when i trigger the load uing infopackage it immediately fails and gives the following messages.
    *If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.*
    +Job terminated in source system --> Request set to red+
    Can you point where the issues is. I have tested the source system connection and it is fine as other extractors are working fine and data can be pulled
    Thanks
    Rashmi.

    Hi Rashmi,
    Try the following:
    - RSA3 in source system -> test extraction OK?
    - Shortdump (ST22) found in BW or R/3?
    - Locate the job of the extraction in R/3 (SM37) and look at the joblog...
    Hope this leads you to the cause...
    Grtx
    Marco

  • Because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem

    because you this loading firefox.exe like process from the beginning of the computer with a load from 38 to 42000 kb or like I can solve this problem, atualmente when lighting the computer among the processes that are loaded when beginning the computer is a process of name firefox.exe with a load of between 30 and 50000 kb but I don't find to the registered firefox inside the programs to crgar from the beginning when entering for msconfig.exe my operating system is so far windows xp up-to-date sp3 and my firefox is 7.0.1 version in Spanish that is my native language.

    That seems very suspicious. Two suggestions.
    First, try Firefox's Safe Mode. This will let you work around problems with add-ons and perhaps help you identify things to remove so that Firefox goes back to normal.
    I recommend making a backup of your Firefox settings before starting in Safe Mode. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that work? If so, you may need to disable your add-ons and just bring the most essential ones back to life until you discover the problem one.
    Second thought: malware. You could supplement your usual security scans with these:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/
    HouseCall : http://housecall.trendmicro.com/
    Hope this helps.

  • I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay.  Works perfectly with my iPod Touch.  The AirPlay icon appears irregularly in iTunes and when selected doesn't connect.  Running latest IOS software.

    I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay.  Works perfectly with my iPod Touch.  The AirPlay icon appears irregularly in iTunes and when selected doesn't connect.  Running latest IOS software.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    You said:
    No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this. 
    That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

  • Issue with site load time when exported as HTML. Addressed?

    Has the issue with website load time been addressed?
    I believe the site attempts to load the entire image content at the initial visit - meaning any galleries with numerous pictures are all included when first getting to the site. This is causing a HUGE increase in load time. I was told when I last brought it up that it was an apparent issue that needed to be addressed.
    Any type of resolution coming?
    Site for reference: www.dkrecollection.com

    Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
    As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

  • The sound  with movieclip loaded from outside

    Hi.everybody...I have a probelm with sound working with
    movieclip loaded from outside. this movieclip is just working fine
    alone..but after being loaded to the other movie..the sound doesnt
    play any more.
    by the way,I loaded this movieclip with loadclip and also add
    listener on it.
    any suggestion,,please..thank u .

    try adding
    yourHolder._lockroot = true; //yourHolder would be the
    instance name of the holder MovieClip

  • Issues with RAW files from my 7D

    I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
    Any words of advice, other than just buy Aperture 3??

    I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

  • Major issues: won't load from blue screen backdrop once blue bar fills up

    i am hoping someone can help! my computer won't start up once it gets to the blue screen background with the mac os x and apple logo in a silver box. the blue bar fills up all the way and then just stalls. i can't load the utility disk becuase i have a cd in the disk drive. yikes. i have not backed up in a few months.
    The problem started occuring after i was experiencing issues with firefox crashing and subsequently finder locking up. after restarting one time this problem occurred. i completed the latest updates yesterday morning.
    Message was edited by: metropink
    Message was edited by: metropink

    Hi! Hold the mouse button down at startup to eject the disc from the dvd drive. Then startup from the install disc and repair the drive as per THIS doc. Tom

  • Did this resolve my Safari 5 issue with not loading pages as fast?

    I've been having this problem every since I got my laptop a month ago... I have a wireless router that's connected to a PC, and I use wireless on my laptop. My old laptop was a PC, and the internet connection was just fine on it. However, I'm having issues with my MacBook Pro. When I first turned on my laptop after taking it out of the box, Airport detected my wireless router and connected me to the internet. Obviously, I used Safari 5 as my browser and although it works... it doesn't load the pages as fast as it should. It even stops loading at times. Usually, I quit Safari and reopen Safari and it works and if it doesn't, I click on the reload button or just keep re-opening Safari until it does work... buttt I am tired of doing that now. So after a lot of attempts by trial and error, I think I found the solution and was wondering if anyone could confirm this with me. I went to my router's IP address and I looked at the settings. I looked at the router's DNS settings and I copied and pasted that router setting into the DNS settings on my laptop for the wireless network. Now, my internet seems to be working... but then again it has only been 5 minutes. So my question is... the router's DNS has to match the wireless network's DNS address?
    Sorry if this sounds like a stupid question... I'm not an expert when it comes to internet, LAN, proxies, and etc. settings. Thank you!

    Further investigation has revealed that the following error message is being generated within Safari during the first time the that the page is loading,
    "Refused to load from document base URL. URL found within request."
    The <base> directive in the HTML, in this instance, is referring to a different URL than the one that the page is running from. The page with the problem is running on a remote server and back referencing to the home server for the <base> reference. This fails when the page first loads but seems to be accepted if a page-reload is done. It also works on all other browsers that have been tested.
    Is this related to a security setting in the browser?

  • Having An Issue With Site Loading In Firebox

    Hello,
    I'm having a small issue that I could use some help with. I'm not really sure what is going on, but I'm having an issue with one of the pages from my site not loading when trying to view the page in Firefox. But if I load this page in Safari or Chrome, it loads just fine.
    Here's the page URL to take a look: <!-- deleted ~J99-->
    <sub >Specific link removed from display by moderator ~J99 </sub> <sitename>.com/top-10/top...services/
    <!-- thread now solved, link removed -->
    Any idea on why this could be happening or how to fix it? I'm not sure if it's just my computer, or if others are having the same issue.
    Thanks in advance,
    Mike

    Hello Mike,
    I have no problem loading and seeing the page <site>.com/top-10/...monitoring-services . General advice would be to try clearing cache and site cookies on the machine you are using.
    *see [[Firefox can't load websites but other browsers can]]
    I imagine you will have easy access to other machines on which you can test with Firefox so hopefully you will be able to test and demonstrate that the page does normally load on Firefox.
    Website design is outside the scope of this forum, but you probably have a professional team working on that.
    I did note from <sitenname>.com/disclosure/
    <blockquote>Disclosure <br /> In regards to the new FTC regulations, we are making this page to be compliant with 100% transparency regarding disclosure of incentive and paid reviews. <br /> Every page on this site has been created to generate revenue. <br /> This site generates income through banner advertisements and affiliate links on product reviews.</blockquote>

  • Issue with Data Loading

    Hi Experts,
    Need your kind help in overcoming the following issue.
    We are doing a full load to an ODS daily from flat file system. Due to certain change request the update rule was changed in between and later on we found out that it was not correct. So the update rule was corrected again. Now its working fine. But still some requests are there where the data has been updated in ODS with the faulty update rule. All the data fields in the update rule for the ODS are using overwrite functionality. The problem lies here is we are not sure if the faulty records in the ODS have not been updated by the following requests. As we are not sure of the exact nature of the data coming in.
    From this ODS one Infocube and one more ODS is being updated. The Key figure calculation in the Cube uses the 'maximum', 'minimum' & 'Addition' calculations.
    And the load from ODS to cube is delta.
    Kindly let me know what can we do to close the above issue.
    I was planning to delete the concerned requests from ODS and reconstruct it. But that way I can correct the data in ODS only. I am not sure if the changes made to the ODS data will be properly relayed to the cube in the proper fashion. please let me know if it will be correct?
    All the flat file data is still residing in the PSA. Also kindly let me know if there is any method to check the PSA for the requests spanning the whole period apart from going to each request and check it one by one.
    Thanks in advance.

    Hi Experts,
    My concern was Say I delete the requests from the day the data was loaded with thw wrong update rule, I have the data sitting in the PSA and I can reconstruct them. I understand that the data can be corrected in ODS.
    But in the cube, some key figures are there with the update method as 'addition'. So say I delete the content of the cube and reload it from the ODS all over again, wont the key figures get corruipted yet again?
    Also as I was thinking, say we delete the respective request from the cube as well, and reconstruct the data in the ODS. can I fire the delta request again to capture the changed records to be loaded to cube. to be exact will all the data from the date of the data corruption(as I am going to delete the requests from the cube from that day also) will be loaded to the cube?
    Also another thing is will it be a better idea to reconstruct a request in the ODS and run the delta package for the cube.. And go on ..
    Kindly suggest..
    Thanks in advance !!!

  • Issue with Data Load to InfoCube with Nav Attrivutes Turned on in it

    Hi,
    I am having a issue with loading data to a InfoCube. When i turn
    on the navgational attributes in the cube the data load is failing
    and it just says "PROCESSED WITH ERRORS". when i turn them off
    the data load is going fine. I have done a RSRV test both on
    the infoobject as well as the cube and it shows no errors. What
    could be the issue and how do I solve it.
    Thanks
    Rashmi.

    Hi,
    To activate a navigation attribute in the cube the data need not be dropped from the cube.
    You can always activate the navigation attribute in the cube with data in the cube.
    I think you have tried to activate it in the master data as well and then in the cube or something like that??
    follow the correct the procedure and try again.
    Thanks
    Ajeet

  • Timeout issues with Software Update from Satellite ISP

    Anyone had any experiences with resolving latency issues and/or what my ISP claims is "long ping times" causing timeout s with OS 10.4x Software Update?
    I've had continuing issues with timeouts since changing ISP's to a satellite ISP here in Australia -- with our Macs seeming to be particularly sensitive.
    - Can't access Software Update as it times out
    - Same problems with some web sites
    - Page loading can hang up and fail to complete, particularly if the page contains lots bells and whistles.
    The ISP support desk has done their best, but has no Apple OSX expertise.
    Ideas anyone?

    Rick,
    I’ve answered the questions you’ve asked, starting below. I am using a router for LAN with 2 IBooks and a Windows XP machine. For further info, I have also included all of the settings recommended by the ISP and additional test results when directly connected to the modem from my Ibook. (Hope I haven’t gone from not giving you enough information to giving too much…)
    1) ISP: www.bordernet.com.au. The system is a two-way satellite link through what I think is an Optus satellite. Max speeds 64 kbps uplink and 256 kbps download. I seem to be getting consistent upload speeds of 48-52 kbps (with or without the router in use), but the download show at about 240+ kbps with the direct connection 150 kbps through the router – and sometimes things hang up altogether.
    Setting a static IP address in the router seems to be slightly more stable as the hang-ups in page loading don’t occur as much, but the speed is still down. (Upload and download tests are done from http://www.ozspeedtest.com) The ISP says is not reliable, but they haven’t been able to give me something more reliable where I can get actual statistics that I can quote – they usually have me attempt to download a file from a local net and read off the download speed as it changes – with the comment back from them, “well that seems OK…) Unfortunately they have no one on the help desk who knows macs, or who can troubleshoot beyond what to them is the obvious.
    2) Ping Test results (via router – see below):
    PING www.l.google.com (66.102.7.147): 56 data bytes
    64 bytes from 66.102.7.147: icmp_seq=0 ttl=241 time=1467.206 ms
    64 bytes from 66.102.7.147: icmp_seq=1 ttl=241 time=1540.800 ms
    64 bytes from 66.102.7.147: icmp_seq=2 ttl=241 time=1524.421 ms
    64 bytes from 66.102.7.147: icmp_seq=3 ttl=241 time=1483.034 ms
    64 bytes from 66.102.7.147: icmp_seq=4 ttl=241 time=1443.389 ms
    64 bytes from 66.102.7.147: icmp_seq=5 ttl=241 time=2211.268 ms
    64 bytes from 66.102.7.147: icmp_seq=6 ttl=241 time=1961.048 ms
    64 bytes from 66.102.7.147: icmp_seq=7 ttl=241 time=1619.386 ms
    64 bytes from 66.102.7.147: icmp_seq=8 ttl=241 time=1506.302 ms
    64 bytes from 66.102.7.147: icmp_seq=9 ttl=241 time=1615.718 ms
    --- www.l.google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 1443.389/1637.257/2211.268/237.610 ms
    2a) Ping test results
    PING www.apple.com (17.254.0.91): 56 data bytes
    64 bytes from 17.254.0.91: icmp_seq=0 ttl=240 time=1618.438 ms
    64 bytes from 17.254.0.91: icmp_seq=1 ttl=240 time=2143.729 ms
    64 bytes from 17.254.0.91: icmp_seq=2 ttl=240 time=1804.615 ms
    64 bytes from 17.254.0.91: icmp_seq=3 ttl=240 time=2184.935 ms
    64 bytes from 17.254.0.91: icmp_seq=4 ttl=240 time=2025.381 ms
    64 bytes from 17.254.0.91: icmp_seq=5 ttl=240 time=1593.362 ms
    64 bytes from 17.254.0.91: icmp_seq=6 ttl=240 time=1460.536 ms
    64 bytes from 17.254.0.91: icmp_seq=7 ttl=240 time=1449.835 ms
    64 bytes from 17.254.0.91: icmp_seq=8 ttl=240 time=1560.768 ms
    64 bytes from 17.254.0.91: icmp_seq=9 ttl=240 time=1910.285 ms
    --- www.apple.com ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 1449.835/1775.188/2184.935/263.419 ms
    Ping has started ...
    PING 17.254.0.91 (17.254.0.91): 56 data bytes
    64 bytes from 17.254.0.91: icmp_seq=0 ttl=240 time=1555.541 ms
    64 bytes from 17.254.0.91: icmp_seq=1 ttl=240 time=1483.936 ms
    64 bytes from 17.254.0.91: icmp_seq=2 ttl=240 time=1562.882 ms
    64 bytes from 17.254.0.91: icmp_seq=3 ttl=240 time=1523.844 ms
    64 bytes from 17.254.0.91: icmp_seq=4 ttl=240 time=1452.485 ms
    64 bytes from 17.254.0.91: icmp_seq=5 ttl=240 time=1497.111 ms
    64 bytes from 17.254.0.91: icmp_seq=6 ttl=240 time=1485.532 ms
    64 bytes from 17.254.0.91: icmp_seq=7 ttl=240 time=1495.856 ms
    64 bytes from 17.254.0.91: icmp_seq=8 ttl=240 time=1485.677 ms
    64 bytes from 17.254.0.91: icmp_seq=9 ttl=240 time=1504.615 ms
    --- 17.254.0.91 ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 1452.485/1504.748/1562.882/32.186 ms
    3) DNS Server: 61.88.88.88
    4) Running through a Router: D-LINK DI-704P, have tried letting the modem set the DHCP itself, also using static settings given by the ISP:
    IP address 10.16.143.74
    Subnet: 255.255.255.252
    Router: 10.16.143.73
    DNS 61.88.88.88
    Proxies 10.16.143.73 Port 9877
    5) Same configuration when using a direct connection from the modem to my Ibook.
    Test results with direct connection
    Ping has started ...
    PING www.apple.com (17.254.0.91): 56 data bytes
    64 bytes from 17.254.0.91: icmp_seq=0 ttl=241 time=1452.367 ms
    64 bytes from 17.254.0.91: icmp_seq=1 ttl=241 time=1469.663 ms
    64 bytes from 17.254.0.91: icmp_seq=2 ttl=241 time=1579.472 ms
    64 bytes from 17.254.0.91: icmp_seq=3 ttl=241 time=1477.354 ms
    64 bytes from 17.254.0.91: icmp_seq=4 ttl=241 time=1557.461 ms
    64 bytes from 17.254.0.91: icmp_seq=5 ttl=241 time=1480.565 ms
    64 bytes from 17.254.0.91: icmp_seq=6 ttl=241 time=1470.410 ms
    64 bytes from 17.254.0.91: icmp_seq=7 ttl=241 time=1490.254 ms
    64 bytes from 17.254.0.91: icmp_seq=8 ttl=241 time=1477.955 ms
    64 bytes from 17.254.0.91: icmp_seq=9 ttl=241 time=1497.614 ms
    --- www.apple.com ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 1452.367/1495.311/1579.472/38.652 ms
    Ping has started ...
    PING 17.254.0.91 (17.254.0.91): 56 data bytes
    64 bytes from 17.254.0.91: icmp_seq=0 ttl=241 time=1531.316 ms
    64 bytes from 17.254.0.91: icmp_seq=1 ttl=241 time=1891.331 ms
    64 bytes from 17.254.0.91: icmp_seq=2 ttl=241 time=1669.007 ms
    64 bytes from 17.254.0.91: icmp_seq=3 ttl=241 time=2108.521 ms
    64 bytes from 17.254.0.91: icmp_seq=4 ttl=241 time=1798.268 ms
    64 bytes from 17.254.0.91: icmp_seq=5 ttl=241 time=1698.021 ms
    64 bytes from 17.254.0.91: icmp_seq=6 ttl=241 time=1568.465 ms
    64 bytes from 17.254.0.91: icmp_seq=7 ttl=241 time=1918.039 ms
    64 bytes from 17.254.0.91: icmp_seq=8 ttl=241 time=1629.117 ms
    64 bytes from 17.254.0.91: icmp_seq=9 ttl=241 time=1482.781 ms
    --- 17.254.0.91 ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 1482.781/1729.487/2108.521/187.331 ms
    Hope all of this helps you to work out what is happening.
    Cheers,
    Frank

  • Performance issues with class loader on Windows server

    We are observing some performance issues in our application. We are Using weblogic 11g with Java6 on a windows 2003 server
    The thread dumps indicate many threads are waiting in queue for the native file methods:
    "[ACTIVE] ExecuteThread: '106' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE
         java.io.WinNTFileSystem.getBooleanAttributes(Native Method)
         java.io.File.exists(Unknown Source)
         weblogic.utils.classloaders.ClasspathClassFinder.getFileSource(ClasspathClassFinder.java:398)
         weblogic.utils.classloaders.ClasspathClassFinder.getSourcesInternal(ClasspathClassFinder.java:347)
         weblogic.utils.classloaders.ClasspathClassFinder.getSource(ClasspathClassFinder.java:316)
         weblogic.application.io.ManifestFinder.getSource(ManifestFinder.java:75)
         weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
         weblogic.application.utils.CompositeWebAppFinder.getSource(CompositeWebAppFinder.java:71)
         weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
         weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
         weblogic.utils.classloaders.CodeGenClassFinder.getSource(CodeGenClassFinder.java:33)
         weblogic.utils.classloaders.GenericClassLoader.findResource(GenericClassLoader.java:210)
         weblogic.utils.classloaders.GenericClassLoader.getResourceInternal(GenericClassLoader.java:160)
         weblogic.utils.classloaders.GenericClassLoader.getResource(GenericClassLoader.java:182)
         java.lang.ClassLoader.getResourceAsStream(Unknown Source)
         javax.xml.parsers.SecuritySupport$4.run(Unknown Source)
         java.security.AccessController.doPrivileged(Native Method)
         javax.xml.parsers.SecuritySupport.getResourceAsStream(Unknown Source)
         javax.xml.parsers.FactoryFinder.findJarServiceProvider(Unknown Source)
         javax.xml.parsers.FactoryFinder.find(Unknown Source)
         javax.xml.parsers.DocumentBuilderFactory.newInstance(Unknown Source)
         org.ajax4jsf.context.ResponseWriterContentHandler.<init>(ResponseWriterContentHandler.java:48)
         org.ajax4jsf.context.ViewResources$HeadResponseWriter.<init>(ViewResources.java:259)
         org.ajax4jsf.context.ViewResources.processHeadResources(ViewResources.java:445)
         org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:193)
         org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
         org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
    On googling this seems to be an issue with java file handling on windows servers and I couldn't find a solution yet. Any recommendation or pointer is appreciated

    Hi shubhu,
    I just analyzed your partial Thread Dump data, the problem is that the ajax4jsf framework ResponseWriterContentHandler triggers internally a new instance of the DocumentBuilderFactory; every time; triggering heavy IO contention because of Class loader / JAR file search operations.
    Too many of these IO operations under heavy load will create excessive contention and severe performance degradation; regardless of the OS you are running your JVM on.
    Please review the link below and see if this is related to your problem.. This is a known issue in JBOSS JIRA when using RichFaces / ajaxJSF.
    https://issues.jboss.org/browse/JBPAPP-6166
    Regards,
    P-H
    http://javaeesupportpatterns.blogspot.com/

Maybe you are looking for

  • Still!!! server side activities have been updated. restart SPD to use the updated version of activities

    server side activities updated... restart SPD to use latest activities" pretty huh? I have been working with SP13 online and a custom list which I would simply like to add a workflow too, When creating a workflow I receive this error, I have uninstal

  • Itunes 11.3.8 keeps crashing on launch. Help please.

    Every time I open itunes it crashes I get the "itunes has stopped working" message. I've tried EVERYTHING. unistalling, re-installing nothing seems to work. I also get this information ... Problem signature:   Problem Event Name:          APPCRASH  

  • Apple Pay Thumbprint doesn't work

    When I try to use Apple Pay, the thumbprint won't work. After I hit the thumbprint a couple of times, I get a "enter passcode" field. The passcode does work to activate Apple Pay, but I want to know why the thumbprint doesn't work and if there is som

  • Why does Firefox 12 quit opening emails after it has successfully opened many beforehand?

    When I click on an emails label, Firefox opens it so I may read it. However, after successfully opening several such emails, the system will then stop doing so. Instead all it does is change the unread email's label from being 'bold' (indicating an u

  • How to get a good trainning

    Hi guys, Somehow l lost my old account and i have to start a new one. Anyway, I really want to be a video editing, and i belive the best tool i can get to keep going will be the Finalcut Studio, today i have my finalcut Express 2 and i work with i li