Issue with Adhoc queries

Hi,
Background: 3 additional fields were added to infotype 0023 to capture the position at the previous organization, Years of exp and Months of previous exp.
The year and Month of previous exp gets populated automatically if you save the start date and end date.
Issue: We try to populate a repot using adhoc query but it doesnot give proper data. example if 0023 has been updated for 100 employees the output would reflect only for 20 odd numbers.
There is no authorization problem
Can anyone suggest why we are facing this issue and if this can be resolved also is there any standard SAP reprot which can give a listing of 0023 for a list of employees
RB

Also, if the dates of IT23 are before hire date (as they often are), you need to set the switch for time-dependency.  You do this in "extras" -> "Code".  The syntax is shown below, and the *$ is part of the syntax
*$HR$ [P0022,P0023]
*$HR$ TIME_DEPENDENCE = 'INDEPENDENT'
You still need to ask for period all, but then it should work.
Hope this helps.
Kirsten

Similar Messages

  • URGENT: issues with jump to targets

    Hey Guys,
    We have recently updated our BW system from 3.1c to 7.0. And now I am having problems with some of my queries. The major problem is for some of the queries I have jumps to other reports and when I try to execute these jumps I get an error saying "Variable I_CALDAY is incorrectly defined ". I have this issue with few queries all in one infoprovider.
    Guys, Any help in regard will be highly appreciated.
    Thanks and Regards,
    Meher

    Problem solved:
    We had to check the box which says "ready for input". This solved the issue as of now.

  • BW hierarchies issue with BOBJ Reporting tools

    Hi All,
    Brief about the requirement:
    Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
    Initial Road map planned for implementation was
    o     to use Crystal for operational and formatted reporting
    o     to use WebI for Ad hoc and interactive reporting
    o     to use Xcelsius for Dashboards
    Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
    What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
    And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
    Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
    Thanks & Regards,
    Bala

    Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
    XI 4.x supposedly resolves mots issues but here again details are not known.
    I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

  • Issues with Infinity - Connection Speed & Other Pr...

    Hi all,
    I had Infinity installed on 2nd November.  Besides some issues with BT mixing up delivery addresses the installation by Kelly Comms went smoothly, and was setup within 45 mins.
    Initial speeds were very good, achieving 74Mb/s Down & 18Mb/s Up with a Ping/Latency of 5ms  Excellent really considering the sub 5Mb/s I was used to with ADSL.  The high connection speeds remained over the weekend until about 4pm on November 5th.  I found that the Openreach Modem had lost connection (flashing DSL light) and my HH3 Broadband light was a steady orange.  I left this for a while before picking up my landline to call customer services only to find that my line was dead with no dial tone.
    Broadband eventually came back on service later that afternoon, but at a much lower speed of 43Mb/s Down, and an almost impossibly slow 0.97Mb/s Up.  Ping/Latency has also slowed to around 20ms.  During the evening I managed to get through to customer services in India, who were able to start dealing with the fault on my phone line. 
    Initially I was told it would be the 12th of November that the problem with the phone line would be resolved.  Fortunately enough it was then fixed the following morning by an apparent engineer visit.  I was unaware of this action until later in the day, but had noticed before leaving for work that Broadband was yet again down.
    So to cut a long story short: I have a phone line that works, but a big reduction in connectivity speed especially upstream speed.  Should I be contacting BT to investigate yet another potential problem bearing in mind that I am still within the supposed '10 day training' window.
    (All speed tests have been conducted via a PC connected by ethernet directly to the HH3)
    If anyone can advise me it would be much appreciated.

    Hi Tidycarrot,
    Welcome to the Forum. What was the speed estimate given to you when you signed up to the service? If the speeds you are see are well below that estimate, send me in your details using the link below and I'll run a few test on you line from here.
    http://bt.custhelp.com/app/contact_email/c/4951
    Thanks
    Paddy
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Performance Issues with large XML (1-1.5MB) files

    Hi,
    I'm using an XML Schema based Object relational storage for my XML documents which are typically 1-1.5 MB in size and having serious performance issues with XPath Query.
    When I do XPath query against an element of SQLType varchar2, I get a good performance. But when I do a similar XPath query against an element of SQLType Collection (Varray of varchar2), I get a very ordinary performance.
    I have also created indexes on extract() and analyzed my XMLType table and indexes, but I have no performance gain. Also, I have tried all sorts of storage options available for Collections ie. Varray's, Nested Tables, IOT's, LOB's, Inline, etc... and all these gave me same bad performance.
    I even tried creating XMLType views based on XPath queries but the performance didn't improve much.
    I guess I'm running out of options and patience as well.;)
    I would appreciate any ideas/suggestions, please help.....
    Thanks;
    Ramakrishna Chinta

    Are you having similar symptoms as I am? http://discussions.apple.com/thread.jspa?threadID=2234792&tstart=0

  • Performance issues with Oracle EE 9.2.0.4 and RedHat 2.1

    Hello,
    I am having some serious performance issues with Oracle Enterprise Edition 9.2.0.4 and RedHat Linux 2.1. The processor goes berserk at 100% for long (some 5 min.) periods of time, and all the ram memory gets used.
    Some environment characteristics:
    Machine: Intel Pentium IV 2.0GHz with 1GB of RAM.
    OS: RedHat Linux 2.1 Enterprise.
    Oracle: Oracle Enterprise Edition 9.2.0.4
    Application: We have a small web-application with 10 users (for now) and very basic queries (all in stored procedures). Also we use the latest version of ODP.NET with default connection settings (some low pooling, etc).
    Does anyone know what could be going on?
    Is anybody else having this similar behavior?
    We change from SQL-Server so we are not the world expert on the matter. But we want a reliable system nonetheless.
    Please help us out, gives some tips, tricks, or guides…
    Thanks to all,
    Frank

    Thank you very much and sorry I couldn’t write sooner. It seems that the administrator doesn’t see the kswap going on so much, so I don’t really know what is going on.
    We are looking at some queries and some indexing but this is nuts, if I had some poor queries, which we don’t really, the server would show pick right?
    But he goes crazy and has two oracle processes taking all the resources. There seems to be little swapping going on.
    Son now what? They are all ready talking about MS-SQL please help me out here, this is crazy!!!
    We have, may be the most powerful combinations here. What is oracle doing?
    We even kill the Working Process of the IIS and have no one do anything with the database and still dose two processes going on.
    Can some one help me?
    Thanks,
    Frank

  • Issue with Hierarchies

    Hi ,
    We are working on BO on top of BW pilot version and finding different issues with different tools.
    1) Used existing BW queries/created universe.When we run the report using Web Intelligence, not able to get the way Hierachies displays in BEx.(Tree like structure).
    If we enable drill up and down option, the summary level disappeas only we can see the lower level.Which I think is a useless information to the user as it appears like a flat file data.
    We created the report with possible Hierarchies upfront like a canned report, but doesn't give any option to drill up/down further, doesn't allow the user any other activity, other than dragging/dropping some columns.
    2) Tried to create the report in Crystal, but because of the page limitations, I cannot get all my columns in the same page( I have 35 columns)
    3) To derive the reports in XCelicius, my business partner tells me that they need to create queries on Excel to use that functionality.They are preferring to go with R/3, rather than BW, which will be again significant amount of work.
    I wonder if anyone encountered these kind of issues ?
    Providing these limitations, I don't see much value of having this tool on top of BW.Any comments?
    I agree, it is a great tool on top of relational databases, as we are using this tool on relational databases and didn't find these many issues.
    Can someone provide me the list of advantages of having BO on top of BW? I mean what BO can offer when compared to BEx( We only use BEx, no Web)
    Thanks
    Priya

    hi,
    perhaps I can bring in some clarifications :
    - Crystal Reports is able to leverage the hierarchies and use a parent child relationship and show the hierarchical levels from BW. It looks like the challenge you have in Crystal Reports is that you have a lot of columns that you would like to have in your report. Crystal Reports is layout driven so you could actually set a size of the report by configuring the page setup.
    - web Intelligence is exposing a hierarchy based on levels so that the user can leverage the levels in the report. when enabling the drill down you could actually go from a top level down to multiple levels of the hierarchy
    - Xcelsius can leverage multiple different sources: Web Services, Crystal reports, web Intelligence. Xcelsius can use Live Office to connect to existing reports from Crystal Reports and web Intelligence.
    Feel free to provide your comments / questions in case this doesn't answer your questions
    Ingo Hilgefort

  • BW 3.5, BEx Query designer issue with text of the characteristics

    Hi All,
    We are currently using BEx 3.5 Query Designer to design the queries. We have one of the ODS on which we are querying for.
    We have 3 different types of Customer in this ODS. 0Customer, 0BBP_CUSTOMER and 0GN_CUSTOMER. The problem is when we open this ODS in Query designer we see their text name on the left hand side column where it shows data fields as the same text name Customer.
    Now the our Power users have raised the issue that it is very confusing even when there are 3 different technical names for these characteristics.
    2 Questions I have.
    1) Why is something like this happening? is it some issue with the Patch or something. We will be migrating to new BI soon but in the mean time if I could resolve it that will be the best. Or does it even get resolved with new BI???
    2) what is the way in which we can resolve it?
    Thanks in advance and points will be given generously.

    HI BI Consul!
    Things like this happen, when it is called customer it could be different customers, 0customer is the standard R/3 customer and 0BBP_customer is objects from CRM and most likely 0GN_Customer might be customer from different system.
    Sure, power users should be told which customer is customer and you could also change the discription of the object, to match the definition on the other system. You could also just create z object and replace the existing confusing object with something meaningful to users.
    thanks.
    Wond

  • Bursting a report with multiple queries

    Hi,
    I need to set-up bursting in BIP for a report with multiple queries. The output format is pdf and delivery is through e-mail. Since the queries need to be linked, I'm trying to do this using data template. I've set-up split and burst based on a field (store_id) from the first query which is used as a bind variable in the subsequent queries. So I'd ideally want the report to be split based on store_id. The report works fine if I use a parameter for store_id and view the output by store_id. When I try to schedule the report for bursting, it generates and e-mails the reports but only the last report appears to have correct data output while the others have only the output from the first query (and all other queries appear to return nothing in the report).
    Any suggestions on what could be the issue here? Thanks!
    Here is the data template for the report:
    <dataTemplate name="Report" description="Report" dataSourceRef="ReportDB">
    <dataQuery>
    <sqlStatement name="STORE_VENDOR">
    <![CDATA[SELECT STORE.STORE_ID Q1_STORE_ID, VENDOR.VENDOR_ID Q1_VENDOR_ID, VENDOR.VENDOR_DESC Q1_VENDOR_DESC, PERSON.NAME Q1_NAME
                   FROM STORE, SERVICE_TICKET, VENDOR, ROLE, ROLE_TYPE, PERSON, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
                   WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
                   AND (SERVICE_TICKET.SOURCE_ID = VENDOR.SOURCE_ID AND SERVICE_TICKET.VENDOR_ID = VENDOR.VENDOR_ID)
                   AND (STORE.SOURCE_ID = ROLE.SOURCE_ID AND STORE.STORE_ID = ROLE.STORE_ID)
                   AND (ROLE.SOURCE_ID = ROLE_TYPE.SOURCE_ID AND ROLE.ROLE_TYPE_ID = ROLE_TYPE.TYPE_ID AND ROLE_TYPE.TYPE_DESC = 'PIC')
                   AND (ROLE.SOURCE_ID = PERSON.SOURCE_ID AND ROLE.PERSON_ID = PERSON.PERSON_ID)
                   AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
                   AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
                   AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
                   GROUP BY STORE.STORE_ID, VENDOR.VENDOR_ID, VENDOR.VENDOR_DESC, PERSON.NAME
                   ORDER BY STORE.STORE_ID]]>
    </sqlStatement>
    <sqlStatement name="WO">
    <![CDATA[SELECT STORE.STORE_ID Q3_STORE_ID, 'Nightly Cleaning' Q3_NIGHTLY_CLEANING, 'Nightly Cleaning' Q3_DESCRIPTION, SERVICE_TICKET.TICKET_ID Q3_TICKET_ID, TO_CHAR(SERVICE_TICKET.END_DATE, 'MM/DD/YYYY') Q3_END_DATE, 'Excellent' Q3_QUALITY_RATING_1, 'Satisfactory' Q3_QUALITY_RATING_2, 'Unsatisfactory' Q3_QUALITY_RATING_3
                   FROM SERVICE_TICKET, STORE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
                   WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
                   AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
                   AND STORE.STORE_ID = :Q1_STORE_ID
                   AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
                   AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4']]>
    </sqlStatement>
    <sqlStatement name="SERVC_TYPE_1">
    <![CDATA[SELECT STORE.STORE_ID Q4_STORE_ID, ZONE.ZONE_DESC Q4_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q4_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q4_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q4_WO_END_DATE, 'Excellent' Q4_QUALITY_RATING_1, 'Satisfactory' Q4_QUALITY_RATING_2, 'Unsatisfactory' Q4_QUALITY_RATING_3
                   FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
                   WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
                   AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
                   AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
                   AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
                   AND SERVICE_TYPE.TYPE_DESC = 'ABC'
                   AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
                   AND STORE.STORE_ID = :Q1_STORE_ID
                   AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
                   AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
                   ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
    </sqlStatement>
    <sqlStatement name="SERVC_TYPE_2">
    <![CDATA[SELECT STORE.STORE_ID Q5_STORE_ID, ZONE.ZONE_DESC Q5_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q5_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q5_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q5_WO_END_DATE, 'Excellent' Q5_QUALITY_RATING_1, 'Satisfactory' Q5_QUALITY_RATING_2, 'Unsatisfactory' Q5_QUALITY_RATING_3
                   FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
                   WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
                   AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
                   AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
                   AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
                   AND SERVICE_TYPE.TYPE_DESC = 'XYZ'
                   AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
                   AND STORE.STORE_ID = :Q1_STORE_ID
                   AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
                   AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
                   ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
    </sqlStatement>
    <sqlStatement name="SERVC_TYPE_3">
    <![CDATA[SELECT STORE.STORE_ID Q6_STORE_ID, ZONE.ZONE_DESC Q6_ZONE_DESC, 'Excellent' Q6_QUALITY_RATING_1, 'Satisfactory' Q6_QUALITY_RATING_2, 'Unsatisfactory' Q6_QUALITY_RATING_3, 'One' Q6_QTY_MISSING_1, 'Two' Q6_QTY_MISSING_2, '3 or More' Q6_QTY_MISSING_3
                   FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
                   WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
                   AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
                   AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
                   AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
                   AND SERVICE_TYPE.TYPE_DESC = 'PQR'
                   AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
                   AND STORE.STORE_ID = :Q1_STORE_ID
                   AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
                   AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
                   ORDER BY SERVICE_TYPE.TYPE_ID]]>
    </sqlStatement>
    </dataQuery>
    <dataStructure>
         <group name="G_STORE_VENDOR" source="STORE_VENDOR">
              <element name="Q1_STORE_ID" value="Q1_STORE_ID"/>
              <element name="Q1_VENDOR_ID" value="Q1_VENDOR_ID"/>
              <element name="Q1_VENDOR_DESC" value="Q1_VENDOR_DESC"/>
              <element name="Q1_NAME" value="Q1_NAME"/>
         </group>     
         <group name="G_WO" source="WO">
              <element name="Q3_NIGHTLY_CLEANING" value="Q3_NIGHTLY_CLEANING"/>
              <element name="Q3_DESCRIPTION" value="Q3_DESCRIPTION"/>
              <element name="Q3_TICKET_ID" value="Q3_TICKET_ID"/>
              <element name="Q3_END_DATE" value="Q3_END_DATE"/>
              <element name="Q3_QUALITY_RATING_1" value="Q3_QUALITY_RATING_1"/>
              <element name="Q3_QUALITY_RATING_2" value="Q3_QUALITY_RATING_2"/>
              <element name="Q3_QUALITY_RATING_3" value="Q3_QUALITY_RATING_3"/>
         </group>     
         <group name="G_SERVC_TYPE_1" source="SERVC_TYPE_1">
              <element name="Q4_ZONE_DESC" value="Q4_ZONE_DESC"/>
              <element name="Q4_SERVICE_COST" value="Q4_SERVICE_COST"/>
              <element name="Q4_TICKET_ID" value="Q4_TICKET_ID"/>
              <element name="Q4_WO_END_DATE" value="Q4_WO_END_DATE"/>
              <element name="Q4_QUALITY_RATING_1" value="Q4_QUALITY_RATING_1"/>
              <element name="Q4_QUALITY_RATING_2" value="Q4_QUALITY_RATING_2"/>
              <element name="Q4_QUALITY_RATING_3" value="Q4_QUALITY_RATING_3"/>
         </group>     
         <group name="G_SERVC_TYPE_2" source="SERVC_TYPE_2">
              <element name="Q5_ZONE_DESC" value="Q5_ZONE_DESC"/>
              <element name="Q5_SERVICE_COST" value="Q5_SERVICE_COST"/>
              <element name="Q5_TICKET_ID" value="Q5_TICKET_ID"/>
              <element name="Q5_WO_END_DATE" value="Q5_WO_END_DATE"/>
              <element name="Q5_QUALITY_RATING_1" value="Q5_QUALITY_RATING_1"/>
              <element name="Q5_QUALITY_RATING_2" value="Q5_QUALITY_RATING_2"/>
              <element name="Q5_QUALITY_RATING_3" value="Q5_QUALITY_RATING_3"/>
         </group>     
         <group name="G_SERVC_TYPE_3" source="SERVC_TYPE_3">
              <element name="Q6_ZONE_DESC" value="Q6_ZONE_DESC"/>
              <element name="Q6_QUALITY_RATING_1" value="Q6_QUALITY_RATING_1"/>
              <element name="Q6_QUALITY_RATING_2" value="Q6_QUALITY_RATING_2"/>
              <element name="Q6_QUALITY_RATING_3" value="Q6_QUALITY_RATING_3"/>
              <element name="Q6_QTY_MISSING_1" value="Q6_QTY_MISSING_1"/>
              <element name="Q6_QTY_MISSING_2" value="Q6_QTY_MISSING_2"/>
              <element name="Q6_QTY_MISSING_3" value="Q6_QTY_MISSING_3"/>
         </group>
    </dataStructure>
    </dataTemplate>

    Hello user6428199,
    When you use ":Q1_STORE_ID" in your queries, BI Publisher looks for a report parameter named Q1_STORE_ID. Change all your report queries to get data for all the store_id's available. As you are bursting the report using the store_id as the bursting key, BI Publisher will split the report based on the stored_id and delivers content based on it. No matter how many queries you may have, BI Publisher will loop through all the store_id's available and all the queries will return data for that particular id in a report.
    Thanks,
    Machaan

  • Issue with Query on a virtual infoprovider

    Hello,
    I am getting the following error message while executing a query on a virtual infoprovider. We have recently gone through upgrade from BI 3.5 to BI 7.0 EHP1 (SP5) and from SEM BCS 4.0 to BCS 6.0.
    EVersion not specified or not unique                                                             UCR0                006                   
    EError reading the data of InfoProvider ZBCS_CV11                                    DBMAN             305ZBCS_CV11          
    EError while reading data; navigation is possible                                          BRAIN               289                   
    I>> Row: 11 Inc: RAISE_READ_ERROR Prog: CL_RSDRV_VPROV_BASE   RS_EXCEPTION        301CL_RSDRV_VPROV_BASE
    this query has been running fine before the upgrade. In the selection screen there are two fields - version1 and version2, if I am specifying same value in both the fields then the query runs fine and if I am providing different values then the above stated error message appears.
    I have tried different settings with properties - Read mode: H,A,X and also different combination from the properties of the virtual infoprovider - with and w/o hierarchies; with and w/o navigation attributes but it did not workout.
    the only thing which has changed on this virtual provider is that I had enabled delta caching as this was supposed to be used in a multiprovider.
    Has anyone experienced similar issue or have an idea as to what is going wrong here. Please advice.
    Regards,
    Manish

    Hi Manish,
    I have exactly the same issue with a query on a virtual infoprovider after upgrading from BI 3.5 to BI 7.0 EHP1 (SP5) and from SEM BCS 4.0 to BCS 6.0.
    Would you be so kind to tell me how you fixed this. (other queries seem to be working)
    Kind regards,
    Jamie Flaxman

  • OBIEE 11g Issue with "group by"

    Hello,
    I have issues with the physical queries generated by OBIEE engine.
    All the facts are at detailed granular level. when I query the table, group by clause is excluded from the query. following is the sample query generated by OBIEE 11g engine.
    select 0 as c1,
    D1.c2 as c2,
    D1.c1 as c3,
    D2.c3 as c4,
    D2.c2 as c5,
    D2.c1 as c6
    from
    (select distinct T48494.SMBL as c1,
    T48494.EXP_DT as c2
    from
    VW_CONTRACT_DETAILS T48494
    where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
    ) D1,
    (select sum(T48494.TRADED_VOL) as c1,
    sum(T48494.TRADED_VAL) as c2,
    sum(T48494.TOTAL_TRADES) as c3
    from
    VW_CONTRACT_DETAILS T48494
    where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
    ) D2
    order by c3, c2
    I'm getting similar kind of issues(exclusion of group by from query) even when i query other fact tables as well. Is there any global change to be made?
    Regards,
    Kishore

    Does it mean you are expecting a group by on
    D1.c1, D1.c2?
    So query should like
    select 0 as c1,
    D1.c2 as c2,
    D1.c1 as c3,
    D2.c3 as c4,
    D2.c2 as c5,
    D2.c1 as c6
    from
    (select distinct T48494.SMBL as c1,
    T48494.EXP_DT as c2
    from
    VW_CONTRACT_DETAILS T48494
    where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
    ) D1,
    (select sum(T48494.TRADED_VOL) as c1,
    sum(T48494.TRADED_VAL) as c2,
    sum(T48494.TOTAL_TRADES) as c3
    from
    VW_CONTRACT_DETAILS T48494
    where ( T48494.EXP_DT in (TO_DATE('2012-09-03 00:00:00' , 'YYYY-MM-DD HH24:MI:SS'), TO_DATE('2012-09-19 00:00:00' , 'YYYY-MM-DD HH24:MI:SS')) )
    ) D2
    group by c3, c2 ---> added line
    order by c3, c2

  • N-Step Dynamic Workflow in SAP E-Sourcing _CLM2.0 with Adhoc apprver Featre

    Hi All,
    We are in process of implemeting SAP CLM 2.0 Application to one of our key client. one of the key Requirements is to implement n-step workflow approval based on the HR Based org structure. What the specific client requirement are as below ...
    a)Dynamic N Level organizational hierarchy based approval for a contract document. Approval to be routed to a business requestoru2019s organization hierarchy depending on the value of contract
    b)Approver substitution u2013 Provide functionality of substitution. If a person has to substitute a person for a period of time, workflow item to be routed to substituted user
    c)Forward a workflow item u2013 If a particular workflow item is sitting in a personu2019s for a considerable time, an administrator to have the ability to push the workflow item to another alternate approver
    d)Exception management u2013 Trigger email notifications to an approveru2019s manager if the workflow item is pending for a predefined period without action. If no action even after reminder for additional period of time, trigger another email to manageru2019s manager
    e)Adding Adhoc Approval at any stage during the workflow approval stage ( For eg: - particularly in additional an additional approver in between)
    Our Understanding u2013 None of these functionality is available as standard functionality within SAP CLM application. Correction needed if this understanding itself is incorrect (Low probability).  Also, It would be great if anybody can suggest an alternative approach to handle this.
    Alternate Options u2013  (our thought )
    Any options that can be explored. For instance......
    a)Explore development in CLM itself to achieve the functionality. If so what are the limitations that would still remain. For example CLM supports only fixed levels in the approval, cannot handle dynamic N levels with adhoc approver addition
    b)Explore if SRM framework can be used to integrate the system for n-step  workflow requirement
    c)Can we utilize SAP UWL to integrate CLM system for this functionality
    d)Any Other alternate options if similar requirements were handled in other projects
    Your expert opinion & input required to meet this complex requirement.
    Thanks & Best Rgds/
    Pawan Swaroop
    Milpitas, CA, USA
    Ph: 925-949-9574
    Edited by: Pawan Swaroop on Jan 31, 2011 11:13 AM

    Hi Pawan,
    SAP has not delivered any standard workflows in CLM. We have to develop custom
    Now let me answer your queries:
    a)Dynamic N Level organizational hierarchy based approval for a contract document. Approval to be routed to a business requestoru2019s organization hierarchy depending on the value of contract
              There is no Org structure/hierarchy in CLM. I think you mean the structure/hierarchy will be in SRM/ECC.
              But there is no std interface available to get this into CLM. So you have to first develop an interface to get the hierarchy.
              Dynamic N Level workflows are very much possible in CLM
    b)Approver substitution u2013 Provide functionality of substitution. If a person has to substitute a person for a period of time, workflow item to be routed to substituted user
    c)Forward a workflow item u2013 If a particular workflow item is sitting in a personu2019s for a considerable time, an administrator to have the ability to push the workflow item to another alternate approver
    d)Exception management u2013 Trigger email notifications to an approveru2019s manager if the workflow item is pending for a predefined period without action. If no action even after reminder for additional period of time, trigger another email to manageru2019s manager
    e)Adding Adhoc Approval at any stage during the workflow approval stage ( For eg: - particularly in additional an additional approver in between)
                            All this is very much possible but will require lot of custom solutions and efforts

  • Facing Issue With Oracle SOA Suite 11.1.1.3.0

    Hi All,
    I am facing some issues with ORACLE SOA SUITE 11.1.1.3.0.
    Hope you people can help us out.
    Please find the issue details below along with all the relevant information’s
    I have following SOA suite installation at my server:
    Oracle 10g Express Edition Universal 10.2.0.1
    RCU 11.1.1.3.3
    Web Logic Server 10.3.3.0
    SOA suite 11.1.1.3.0
    JDeveloper 11.1.1.3.0
    The first thing what I have done is created a web service and deployed it to server without any issue.
    After that I created proxy client for that service and accessed it successfully from the client end.
    Till here no issue occurs.
    After that I applied few policies on top of web service and deployed it to server.
    The policy I had chosen was “oracle/wss_username_token_service_policy” [coming under OWSM policies list]
    While deploying there was no issue, all went well.
    2nd step I had created client using “oracle/wss_username_token_client_policy” policy which is counter part of above policy and tried to access the web service but failed.
    I have followed this blog:
    [http://biemond.blogspot.com/2010/08/things-you-need-to-do-for-owsm-11g.html ]
    Please have a look on service and client code:
    Service Code:
    package Demo_ScoreCard;
    import javax.jws.WebService;
    import weblogic.wsee.jws.jaxws.owsm.SecurityPolicy;
    @WebService
    @SecurityPolicy(uri = "oracle/wss_username_token_service_policy")
    public class ScoreCardWithPolicy {
    public double getPercentageWithPolicy(double markEng,double markMath,double markHindi,double markScience,double markSsc)
    double result;
    result= ((markEng+markHindi+markMath+markScience+markSsc)/500)*100;
    return result;
    Client Code:
    package com.tec.proxy.client;
    import java.util.Map;
    import javax.xml.ws.BindingProvider;
    import javax.xml.ws.WebServiceRef;
    import weblogic.wsee.jws.jaxws.owsm.SecurityPolicyFeature;
    public class ScoreCardWithPolicyPortClient {
    @WebServiceRef
    private static ScoreCardWithPolicyService scoreCardWithPolicyService;
    public static void main(String[] args) {
    scoreCardWithPolicyService = new ScoreCardWithPolicyService();
    SecurityPolicyFeature[] securityFeatures =new SecurityPolicyFeature[] { new SecurityPolicyFeature("oracle/wss_http_token_client_policy") };
    ScoreCardWithPolicy scoreCardWithPolicy =scoreCardWithPolicyService.getScoreCardWithPolicyPort(securityFeatures);
    Map<String, Object> reqContext =((BindingProvider)scoreCardWithPolicy).getRequestContext();
    reqContext.put(BindingProvider.USERNAME_PROPERTY, "testclient");
    reqContext.put(BindingProvider.PASSWORD_PROPERTY, "test12345"); // I have added this to the myrealm from console under security realms
    double arg1 = 77.2;
    double arg2 = 79.2;
    double arg3 = 77.2;
    double arg4 = 76.2;
    double arg5 = 67.2;
    double clientResult =scoreCardWithPolicy.getPercentageWithPolicy(arg1, arg2, arg3, arg4,arg5);
    System.out.println("clientResult with policy =====> " + clientResult);
    Error Log:
    SEVERE: WSM-07617 Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
    SEVERE: WSMAgentHook: An Exception is thrown: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
    Exception in thread "main" javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-07617 Policy Policy: oracle/wss_http_token_client_policy contains unsupported assertions.
    at oracle.wsm.agent.handler.wls.WSMAgentHook.handleException(WSMAgentHook.java:395)
    at oracle.wsm.agent.handler.wls.WSMAgentHook.init(WSMAgentHook.java:206)
    at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.newHandler(TubeFactory.java:105)
    at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory.createClient(TubeFactory.java:68)
    at weblogic.wsee.jaxws.WLSTubelineAssemblerFactory$TubelineAssemblerImpl.createClient(WLSTubelineAssemblerFactory.java:148)
    at com.sun.xml.ws.client.WSServiceDelegate.createPipeline(WSServiceDelegate.java:467)
    at com.sun.xml.ws.client.WSServiceDelegate.getStubHandler(WSServiceDelegate.java:689)
    at com.sun.xml.ws.client.WSServiceDelegate.createEndpointIFBaseProxy(WSServiceDelegate.java:667)
    at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:362)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:855)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:967)
    at weblogic.wsee.jaxws.spi.ClientInstancePool.takeSimpleClientInstance(ClientInstancePool.java:621)
    at weblogic.wsee.jaxws.spi.ClientInstancePool.take(ClientInstancePool.java:486)
    at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:782)
    at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:344)
    at javax.xml.ws.Service.getPort(Service.java:133)
    at com.tec.proxy.client.ScoreCardWithPolicyService.getScoreCardWithPolicyPort(ScoreCardWithPolicyService.java:86)
    at com.tec.proxy.client.ScoreCardWithPolicyPortClient.main(ScoreCardWithPolicyPortClient.java:23)
    Process exited with exit code 1.
    Not getting any help from any blog. Just wondering why this error is coming. I would be glad if you can help us in this regard.
    Apart from above issue I have few queries like:
    1.What is difference between OWSM policies and WLS policies?
    2.Are these the only policies we can apply on top of services?
    3.If some one wants to configure his own custom policies than what need to be done
    4.Could anyone please provide some useful links to implement ENCYPTION and SIGNATURE on top of web services?
    5.And If I am not wrong, I guess Oracle Service BUS OSB 11.1.1.3 has been removed from the main download link and version 11.1.1.4 has been provided. Is it
    compatible with SOA suite 11.1.1.3.0? If not where can I get OSB 11.1.1.3?
    Looking forward to hear from you people.
    Thanks
    Arvind
    Edited by: user8490871 on Apr 15, 2011 12:53 AM
    Edited by: user8490871 on Apr 15, 2011 12:53 AM

    Hi,
    I don't know why u get an error. Here are answers for additional questions:
    1. OWSM policies are for web services. WLS policies are based on Java EE security. They are used to protect resources e.g. URL, EJB
    2. I don't know about other policies
    3. See http://download.oracle.com/docs/cd/E14571_01/web.1111/e13713/owsm_appendix.htm#CHDCHFBH
    4. See http://download.oracle.com/docs/cd/E14571_01/security.1111/e10037/toc.htm
    5. I can see OSB 11.1.1.3 download link here
    http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
    Regards,
    Milan

  • Issue with the partialTrigger on ADF Table

    Jdeveloper Version 11.1.2.3.0
    I have replicated issue with partialTrigger on the table component. Sample application can be downloaded from here . It needs HR schema to run.
    In below sample pageFragment, I can try refreshing adf table in two ways
    1. Set addEmployee button's id in partialTrigger of ADFTable component.
    2. Set addEmployee button's id in partialTrigger of PanelBox component.
    Note the difference - 1st one doesn't work where as 2nd works fine. Do we have any additional constraints when refreshing ADF table using
    partialTrigger ?
    I replicated the usecase in below example :
    PageFragment Structure -
    PanelBox                         
    |                              
    |__ ADF Table                         
    |                              
    |__toolbar facet                    
    |                              
    |__ addEmployee button                
    PageFragment Code
    <af:panelBox text="PanelBox2" id="pb1">
    <f:facet name="toolbar">
    <af:commandButton actionListener="#{bindings.addEmployee.execute}" text="addEmployee2"
    disabled="#{!bindings.addEmployee.enabled}" id="cb1" partialSubmit="true"/>
    </f:facet>
    <af:table value="#{bindings.EmployeesView1.collectionModel}" var="row" rows="#{bindings.EmployeesView1.rangeSize}"
    emptyText="#{bindings.EmployeesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.EmployeesView1.rangeSize}" rowBandingInterval="0"
    selectedRowKeys="#{bindings.EmployeesView1.collectionModel.selectedRow}"
    selectionListener="#{bindings.EmployeesView1.collectionModel.makeCurrent}" rowSelection="single" id="t1"
    displayRow="selected" partialTriggers="::cb1" styleClass="AFStretchWidth">
    <af:column sortProperty="#{bindings.EmployeesView1.hints.EmployeeId.name}" sortable="false"
    headerText="#{bindings.EmployeesView1.hints.EmployeeId.label}" id="c1">
    <af:inputText value="#{row.bindings.EmployeeId.inputValue}"
    label="#{bindings.EmployeesView1.hints.EmployeeId.label}"
    required="#{bindings.EmployeesView1.hints.EmployeeId.mandatory}"
    columns="#{bindings.EmployeesView1.hints.EmployeeId.displayWidth}"
    maximumLength="#{bindings.EmployeesView1.hints.EmployeeId.precision}"
    shortDesc="#{bindings.EmployeesView1.hints.EmployeeId.tooltip}" id="it1">
    <f:validator binding="#{row.bindings.EmployeeId.validator}"/>
    <af:convertNumber groupingUsed="false" pattern="#{bindings.EmployeesView1.hints.EmployeeId.format}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="#{bindings.EmployeesView1.hints.FirstName.name}" sortable="false"
    headerText="#{bindings.EmployeesView1.hints.FirstName.label}" id="c2">
    <af:inputText value="#{row.bindings.FirstName.inputValue}"
    label="#{bindings.EmployeesView1.hints.FirstName.label}"
    required="#{bindings.EmployeesView1.hints.FirstName.mandatory}"
    columns="#{bindings.EmployeesView1.hints.FirstName.displayWidth}"
    maximumLength="#{bindings.EmployeesView1.hints.FirstName.precision}"
    shortDesc="#{bindings.EmployeesView1.hints.FirstName.tooltip}" id="it2">
    <f:validator binding="#{row.bindings.FirstName.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="#{bindings.EmployeesView1.hints.LastName.name}" sortable="false"
    headerText="#{bindings.EmployeesView1.hints.LastName.label}" id="c3">
    <af:inputText value="#{row.bindings.LastName.inputValue}"
    label="#{bindings.EmployeesView1.hints.LastName.label}"
    required="#{bindings.EmployeesView1.hints.LastName.mandatory}"
    columns="#{bindings.EmployeesView1.hints.LastName.displayWidth}"
    maximumLength="#{bindings.EmployeesView1.hints.LastName.precision}"
    shortDesc="#{bindings.EmployeesView1.hints.LastName.tooltip}" id="it3">
    <f:validator binding="#{row.bindings.LastName.validator}"/>
    </af:inputText>
    </af:column>
    <af:column sortProperty="#{bindings.EmployeesView1.hints.DepartmentId.name}" sortable="false"
    headerText="#{bindings.EmployeesView1.hints.DepartmentId.label}" id="c11">
    <af:selectOneChoice value="#{row.bindings.DepartmentId.inputValue}" label="#{row.bindings.DepartmentId.label}"
    required="#{bindings.EmployeesView1.hints.DepartmentId.mandatory}"
    shortDesc="#{bindings.EmployeesView1.hints.DepartmentId.tooltip}" id="soc1">
    <f:selectItems value="#{row.bindings.DepartmentId.items}" id="si1"/>
    </af:selectOneChoice>
    </af:column>
    </af:table>
    </af:panelBox>
    Thanks,
    Rajdeep

    Hi Frank,
    Indeed it worked. But I have two queries now :
    1. We are adding employee record using a method called through method action Binding. So shouldn't the bindings be aware of the same .. i mean sychonization of binding layer should happen when method action binding is used ?
    2. Why it works when i apply partialTrigger on panelBox ? Why "employeesViewImpl" code is not required when I apply partialTrigger on panelBox ? Is it a concept that iterator is reexecuted when you refresh parent component ?
    Thanks,
    Rajdeep

  • Memory leak issue with link server between SQL Server 2012 and Oracle

    Hi,
    We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue.  For more context please refer to the link.
    http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
    The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012.  I could not find any article that talks about if this issue was fixed by Microsoft in later version.
    We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
    Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
    We wanted to know if this fixed in SQL Server 2012 ?

    So your question is more of a information type or are you really facing OOM issue.
    There can be two things for OOM
    1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
    2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used.  Did you made sure that you are using latest version.
    What is Oracle version you are trying to connect(9i,10g, R2...)
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

Maybe you are looking for

  • Report Builder

    Help Using the 'Groupe Left' style. I simply want a report which will give me a count for each 'group field' on seperate concurrent lines. The problem is that for each record a blank line is appearing (used the visible no option), so instead a report

  • App store wants to install same update twice?

    Specifically, iTunes 11.1.2. I installed it already early this morning, as the App Store admits; it's there under "Updates Installed in the Last 30 Days." It's also, though, above that as something that needs *to* be installed, red "1" on the icon an

  • Not able to type body/subject in the mail ?

    Brand new iphone bought for Christmas. I start at Home where the mail app is at the bottom, I can write in the email address I want to send, but when I go to the body the key pad isn't showing up. (I'm using Yahoo email) Is it because I don't have a

  • Upgrade OS 10.5.8 to OS 10.6.4

    Hey I'd like to upgrade my operating system from OS 10.05.08 to OS 10.06.04, mainly for using the new Magic Pad, which I bought. Can anyone guide me how to make the upgrade? Ram

  • Solution Manager Project Authorization

    Dear Friends,    I have come across one authorization object namely "S_PROJ_AUTH. What is the importance of this object? In that object, field name, PROJAUTH, system asking me to enter project number. But i know only project name. From where i can th