Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Similar Messages

  • Converted key figures not populating

    Hi Experts,
    The query run shows up the converted key figures but the APD is not populating the same, i tried moving the key figures that are not populating in the query around, and it seemed to work in quality, why it is not populating in APD in the production system?

    Hi,
    The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
    Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
    Please guide accordingly.
    Many thanks,
    Anamika

  • Issues with BEx Reports in SAP Enterprise Portal

    Hello Experts,
    I am facing issues with BEx reports integrated in portal. Below are more details:
    Scenario 1:
    Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
    When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
    The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
    The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
    Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
    Scenario 2:
    Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
    Helpful pointers appreciated.
    Thanks
    Vikash

    HI Suman,
    I am not adding the report to favourite using browser favourite. Below is the flow:
    Run the report in portal.
    There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs  for saving the report.:
    Favourite
    BEx Portfolio
    My Portfolio
    save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
    BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
    If I press send for unsaved report, then BEx broadcaster Wizard is shown.
    Thanks,
    Vikash

  • Dynamic Texts from Bex ( for Key Figures ) not coming to WEBI Query

    Hi Gurus,
    We have a Query in BEx : Each  Key figure column text changes dynamically - Like based on Present month
    it will Display Month +1 Month +2  up to Month +12.  Used  dynamic Text variables .
    But when i created the universe and Webi report , i am missing the text in the column for Key figures .
    How should i get the column text in Webi which is same as in Bex : Points will be awarded for helpful
    answers.
    Thanks
    Magge

    Hi,
    text variables with replacement path are supported in BO4.0, see following document: SAP BusinessObjects BI4 - Supported BEx Query Elements
    As an example after entering 2012 in the prompts window, the name of the corresponding key figure will dynamically change:
    After refreshing and selecting 2013, the column name will update:
    Im not sure though if this is the case with unv universe access to BEx queries.
    Best regards,
    Victor

  • Restricted key figure not populating data

    Hi Guru's,
    I am facing problem with restricted keyfigure. I have restricted amount with cal year which is not populating data.
    This key figure is having data in provider.
    Could you let me know how to overcome this .
    Thanks in advance.
    Thanks,
    Vijay.

    Hi,
    The quesry is on Multiprovider? or infoset? it matters first..... or directly on cube? check it and apply relevent infoprovider properties for logic check.
    Check the global filters are there any infoprovider  restrications etc...
    And also while checking the datafor the KF in infoprovide " use ALL the restrictions that are in query and impact the data"
    also try removing the restiction and look for data...
    Hope this helps.'

  • Decimal Places of Key Figure not displaying Correctly

    Hi BW Gurus,
    I have a key Fig ZLENGTH of type Quantity. I am calculating length in Kilo Meters with this.When I am trying to load the data in my cube with flat file say if value for length is 8.123 Km it is showing in Cube 8.000 . As cklient requirement is for three decimal places I want to show exact value i.e. 8.123KM
    Pls. help. Matter Urgent
    Regards,
    MANDAR

    Hi,
    in CUNI select LENGTH in front of Units of Measurement, click the button and then double click the KM row to open its properties.
    Deciaml rounding should be empty there; if this is the case you'll have to simulate your update in order to see where the system is removing the decimals.
    Check that the original record in the PSA has decimals.
    Check that the communication structure record has decimals.
    Finally the data target record.
    It must happen somewhere in the dataflow.
    hope this helps...
    Olivier.
    Message was edited by:
            Olivier Cora

  • Issues with Bex query structures and Crystal Reports/Webi

    Hi experts,
    I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
    Budget $
    Budget %
    Actual $
    Actual %
    Budget YTD
    etc
    if I drag the structure into the Crystal Report detail section with a key figure it displays like this
    Budget $     <null>
    Budget %     <null>
    Actual $     300
    Actual %     85
    Budget YTD     250
    the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
    Actual $     300
    Actual %     85
    Budget YTD     250
    Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
    Business Objects Edge 3.1 SP2
    SAP Int Kit SP2
    OS: Linux
    BW 701 Level 6
    Crystal Reports 2008 V1
    Thanks
    Keith

    Hi,
    Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
    ingo

  • Virtual Key figure not getting populated

    Hi All,
    I have included a virtual key figure in a multiprovider  on which the query is created and its underlying ODS.
    This issue is the virtual key figure is not getting populated . I am not sure what I am missing
    I did the following :
    1) Tried Debugging - Put a break point and execute the query in RSRT.It  did not go to the Exit. I also tried  generating the query from RSRT.
    I am using the BADI (RSR_OLAP_BADI) to populate the Vir Key Fig.
    Please guide me.
    Thanks,
    HM

    Hi All,
    Now that I am able to get the logic to come up in debug. I am faced with another issue.
    I am implementing  avery simple logic . I added a integer type key figure to the ODS and I am tryin to assign value 1 to the the key figure in the code (I am assigning 1 just ot check if the value is passed to query or not. I do have acomplex logic tha i need to implement).
    Here I am able ot see the value in the debug but in the qury the value is not populated.
    N ot sure what might be going wrong.
    code is
    l_z_avg = 1.
    <fs_zavglate> = l_z_avg .
    Appreciate help.
    Thanks,
    HM

  • Problem with Non-cumulative key figure.

    Hi all,
    I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
    <b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
    I have done the following while defining the non-cumulative InfoCube:
    1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
    2. Loaded data to non-cumulative InfoCube from flat file.
    3. Compressed data in non-cumulative InfoCube after the load.
    Note:
    1. Validity area is determined by the system based on the minimum and maximum date in data.
    2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
    Is there any other settings to be done?
    Please help me in resolving this issue.
    Thanks and regards
    Pruthvi R

    Being a non-cumulative KF, total stock is automatically takes care of that.
    Try putting all the restrictions which you have included for total receipts and total issues, for eg,  restrict Total Stock with the movement types used in Receipts as well as Issues.
    Check and revert.
    Regards
    Gajendra

  • Performance Issue with VL06O report

    Hi,
    We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
    Thanks,
    Surya

    Sreedhar,
    Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
    select vbeln lifnr from vbpa
         appending corresponding fields of table lt_select
         where     vbeln in ct_vbeln
         and     posnr eq posnr_initial
         and     parvw eq 'SP'
         and     lifnr in it_spdnr.
    I don't see any issue with this query. I give more info later

  • Bex Report Designer is not previewing changes in QA

    Hi All,
    Please help... i am getting an unusual problem with bex report designer. I have created a bex report using report designer. This was then transported in to QA. In QA i opened my created report using report designer and clicked the print version button to preview the report in PDF format. This all worked correclty, however i noticed a spelling mistake in one of the custom text fields i am using.
    So i put the report in a transport in dev, made the changes in dev and previewed in dev. Everything is ok here and i can see the change i made.
    After this i transported the report to QA and when i open the report in report designer to preview the data i can see in design mode that the custom text field does HAVE the change i made so it is correct. The problem i am getting is though when i preview to see in PDF format the image i get is of the old preview with the spelling mistake.
    SInce i have made more changes and i can see the changes in DEV and in QA in design mode but when i preview it shows me the old image from the 1st preview.
    Please can anyone shed any light into this issue.
    Kind regards
    Forhad

    Refreshed the JAVA server resolved issue

  • I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one

    I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Variable input values issue with Portal reports in WAD

    Hi Gurus,
    We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But  the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
    ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
    Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
    Regards,
    Yada

    Hi Hari,
    Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
    Regards,
    Yada

  • How to find key figures not created in a Structure.

    After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure?  Does anyone know how to find Key Figures not created in a Structure.

    Thanks for such a quick response.
    I am assuming the following about the table :
    -     Column u201CCALDAYu201D contains a date value for each day the Index is active.
    -     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
    -     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
    -     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
    -     Column u201CBIA_TECHINAu201D ????????
    -     Column u201CBIA_INAu201D ???????
    -     Column u201CDB_FALLBACKu201D ???????
    I am not sure if my understanding of the column is correct.  Can you tell me they are?  The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
    Thanks

  • User issue with a report supply planning area today monthly

    this is a support issue....the user has an issue with a report supply planning area today monthly.  The user is getting wrong values in BW, it sums PLOs and POs under production (config).  for eg:  BW says we are producing 46T while in R/3 we have 4T.

    The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Maybe you are looking for

  • IPhone 5 not showing up in iTunes

    I have followed all the steps Apple has provided to solve this problem, but it does not resolve my issue.  It shows up in my computer, but iTunes is not recognizing it.

  • Page history in the page title bar

    Hi,     I have customized default masthead and  tln.     I created iView that contains both customized masthead and tln.     now in the page title bar. only the current page  is maintained in the history of the titile bar.     previous pages are not

  • Wifi pcmcia card with antenna for PB g4...

    Will any wireless card work in the pcmcia slot of my PB G4 or does it need to be Apple specific? I already have the built in Airport extreme but I want to get a pcmcia card that has an external antenna attachment. My neighborhood has free wifi spots

  • Consume webservice using HTTP adapter

    Hi PI Experts, Can we consume a webservice using a HTTP adapter? If yes can anyone share some knowledge, how to do so? Thanks & REgards, Krishna

  • Video Playback Issues after Downloading iTunes 10.4.1 & Quicktime

    After downloading v. 10.4.1, video playback framerate is terrible. Voices are choppy & out of sync with dialogue. The music wasn't necessarily affected but, can here slight distortion. This hasn't been an issue until downloading the latest software v