Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

Similar Messages

We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Thank you!

We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

Priscilla,
if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.)

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HT4623 Have just updated to the latest version of ios6 on my iPhone 4S and now I can't see the apps that need updating. Is showing 8 but just left with blank screen.

Have just updated to the latest version of ios6 on my iPhone 4Sand now I can't see the apps that need updating. Is showing 8 but just left with blank screen- how do I fix this?

Look for the little Flag button in the lower left corner.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

Can not access app store on iphone 5, comes up with blank screen?

click on app store on iphone 5 and it comes up with blank screen , after awhile the section heading at the bottom of the screen such as top charts, updates, search , etc, but the main screen body is still blank. Seems to be trying to connect but can't. Any ideas? Much appreciate it.
Thanks!
CC

Do you have a case on the phone? If so, what case? If you do, then try removing the case and see if it works.
If not, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. After that, try again.

Blank screen on mac pro notebook

two days ago i slammed my mac without shutting down. The next day I found the screen blank. when I connected the mac to the tv screen using hdmi cable, I could see every thing on the tv screen as usual.
i tried several things, but the screen only goes from black to white and nothing else.
can any one help please?

Hi mohamedfromoctober,
If you are having issues with a blank or black screen on your Mac (but can see the proper display image on an external display), you may inadvertently be in Closed Clamshell mode, especially if you are running 10.6.8 or earlier. If so, you may find this article helpful:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
If you are still having issues or it is not a Closed Clamshell issue, you may find the troubleshooting steps outlined in the following article more useful:
Apple computers: Troubleshooting issues with video on internal or external displays
Regards,
- Brenden

ITunes preferences opens with blank screen, HELP!

Alright so I was getting bored of the Windows Media Player interface, so I decided to go back to iTunes.
The installation went fine, but when I wanted to change my options/Preferences, it comes up with this weird blank screen.
http://img40.imageshack.us/img40/3057/waaw.jpg
I've searched on google and only found 1 thread about this with no answers. So I decided to come and ask here.
So I would REALLY appreciate some help because I've always liked iTunes better than WMP.

What version of iTunes do you have installed? Do you have any iTunes plugins?
Troubleshooting issues with 3rd-party iTunes add-ons
If you create a new Windows Vista user, and log in to that user, do you still have the same problem?

Qosmio G30-126 - start up problem with blank screen

My laptop was running perfectly untill i suddenly found it booting with the start up sound enable but without any picture appearing on the display untill i got the windows login page at which the picture appeared with its normal perfect resolution.
The operating system is Windows 7 which was working smoothly, with all toshiba drivers installed from more than 3 monthes and the device was normally shut down the time before the problem appeared.
I tried using the recovery disc but the problem is that i cant see any thing! the computer is working but the display is black as if the laptop is completly turned off.
I tried to connect another external LG LCD but it didnt give any results but only a blank screen.
I really need help in this issue as this laptop contains all my work and i depend on it alot.

Hi Jeka-??
First, thanks for the reply. Second i think i can fully access the BIOS using F1 but the problem that the screen is totally black. You will ask how do you know that you entered BIOS? the answer is that it do the restart when i press the right combination of keys to save and exit i.e. After pressing F1, i press the end key which supposed to give me a message of save and exit and i press Y so the laptop restarts.
Third, are you sure that this is a defected GPU card? as if there are any possibilities to try before sending the computer to Toshiba service center, i'll be glad to them on my own.
By the way the graphic card works perfectly when the computer log on the windows even with games i.e. the monitor starts to display picture starting from the choosing profile page of windows. The original recovery disk is VISTA Ultimate and i'd like to restore it back instead of the installed windows 7 as a trial but unfortunately i cant see the process as i have to enter some data to continue installation and i cant remeber them to do it blind.
Do you know a method to reinstall the bios update again? as when i try to install it through windows 7 it keeps saying " [Error] BIOS Update is not supported OS. Unsupported OS or service pack is installed "

Ibook g3 OSX 10.2.8 was upgraded to 10.4 but screen went black, sound fine. How do I revert to 10.2.8 with blank screen?

So here's what happened. The Apple Store Geniuses generously upgraded my ibook g3 with OSX 10.2.8 to OSX 10.4 via USB port since my CD drive no longer works. But the screen suddenly went black, sound was fine. Genius was stumped, but when I restarted later I very briefly got an initial screen plus the music that accompanies an initial OS installation before screen went black again. I really think that OSX 10.4 was more than my ibook g3 could handle. I don't recall the specifications anymore and can't check them with a black screen, but capacity was fairly limited. I went back to Apple a few weeks ago to ask them to downgrade my poor ibook g3 to OSX 10.3 which seems more likely to work with my computer's specifications, but was informed that OSX 10.3 is no longer available for them to load via USB. Today it occured to me that OSX 10.2.8 is still somewhere on my ibook, and if there's some shortcut I can use to restart under 10.2 instead of 10.4, some switch of OS I can make while blind (since the screen is currently dark), I could at least still use the ibook using the old 10.2 OS. Is there a way to do this switch in OSX while essentially blind? If not, my ibook is basically a doorstop I originally spent over $600 on 10 years ago. I really can't afford to just run out an buy new computers as I am disabled and dying a slow painful death from Lyme disease, but can't afford medication to treat my own illness, let alone buy another computer every 5 years. Please help!

Hello,
Ok let's see what we can do here.
First thing to try is resetting the PMU. Http://support.apple.com/kb/HT1431 it may make no difference but its good practice to do so.
So times it can resolve faults. You say they installed Mac OS X 10.4. Did they setup a user a count and did you see the desktop? Did they simply hand it back to you when the installed failed with a blank screen?
The truth is, in order for you to restore your iBook your going to need the system restore disk. With a broken CD drive this has limitations as you have no real means to install.
The only option would be to use target disk mode on an external drive, but being an early G3 iBook I'm not sure if target disk mode will work. I am going to assume the shop used this method to install via USB.
What would be a good solution is to fit a replacement CD drive. They are often cheap enough to buy and relatively easy to fit on a white duel USB model. Replacement CD drives can be brought from eBay at very little money.
An online guide can help you fit one with the right screwdrivers.
With a replacement drive, you will be open to better options for installing or even using an apple hardware test disk to diagnose any faults with the screen.
Suprised you was left in such a situation by the shop.

OS X LION Issues with Full-Screen; iPhoto, Image Capture & Mail

Hello,
I'm experiencing un-Apple-like issues (bugs) with Lion in Full-Screen mode.
For example - iPhoto doesn't seem to like Full-Screen mode. If iPhoto is open and I connect a camera, for which I prefer Image Capture to retrieve my pics... Image Capture opens 'behind' the full-screen iPhoto, but I can't get to it. Image Capture shows as open on the menu bar in iPhoto's full-screen mode. If I go to the desktop (where it should be opening) Image Capture isn't 'on top' and clicking it takes me back to iPhoto full-screen
Similarly, if I get mail and return to the desktop (the only way to see the dock) and I click on the 'Mail' app icon - I am catapulted into Image Capture... or iPhoto. Returning to the Desktop to click the Mail icon from the dock... takes me to Image Capture... or iPhoto. The 3rd try takes me to the Mail.app which is usually always open and in full-screen mode.
While I'm complaining about bugs, I'd like to mention that I am fully dismayed by the loss of control in full-screen mode when using apps such as Mail or iPhoto. The Mail app opens an email to edit (such as a reply) but you can't access any other mail docs to 'cut and paste' info from. I can only click SEND or CANCEL.
What if I don't want to CANCEL? I just want to go to another email and cut a piece to paste.. I have to exit full-screen mode which allows me to open two email documents at once, then cut and paste. Essentially Mail in Full-Screen is only a reader... not a work area. I can only access the document I have open, since it greys out the Message Viewer. You can't click on the message viewer nor access any of the features of Mail.app. You can only write your email and either Cancel or Send. Where is the 'hold on a second while I go cut and paste'? I don't want to cancel.
Can't seem to use Safari since I'm constantly three-finger swiping it away. My cursor hovers over a text field and suddenly it's zooming in and locks text input. I have to iPhone-like swipe to expand to exit this inadvertent partial (very slight) zoom. Sometimes the zoom is so partial that I can't figure out what's going on until I just exit full-screen mode, close the window and start over.
Seems like I'm starting over and over and over... just to do simple things. Inadvertent zooming, inadvertent 3-finger returning to Desktop, inadvertent changing apps... ugh.
I'm willing to let go of the old and embrace the new future but so far it's been pretty uncomfortable for me to constantly monitor my overly sensitive trackpad gesturing combined with constant bugs and glitches. I'll save complaining about iPhoto's over-simplification (apparently for dummies) like the new Edit menu, Export menu, etc.. since it's more iLife than Lion related. Rate Lion: 2 out of 5 stars for ease of use & features complicated by unrefined software issues.

I've tried follwoing these instructions but I have an issue with
# Create snort user. The intention is to let user snort have access only to the snort database.
$ sudo createuser -U _postgres -P snort
Password:
Enter password for new role:
Enter it again:
Shall the new role be a superuser? (y/n) n
Shall the new role be allowed to create databases? (y/n) n
Shall the new role be allowed to create more new roles? (y/n) n
It keeps telling me "could not connect to database postgres: could not connect to server: No such file or directory"
I'm running OSX Mountain Lion, and have verified using serveradmin status postgres that it is up and running.

TS1538 iPod Touch with blank screen that doesn't shut off and not recognized by iTunes?

I opened the app "MyTown 2", and it stayed on the opening screen for about 5 minutes - WAYYY too long! So I tried to close the app. A slight grayscale sort of film "slid" down over the opening screen, and then it went to this light gray, completely blank screen. It's been that way for over an hour - no matter what I do, can't do a hard shut down, and the device is not recognized by iTunes at all. It's completely DEAD!!!! Is there any hope? Anyone have a clue?

Following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPod Touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help.

Issue with Full Screen & Input languages (Mavericks 10.9.1)

I have two issues with the latest (Version 8.0.24308) Microsoft Remote Desktop from the Mac App store:
1. If I tick the connection entry "Start session in fullscreen" option, after connect the desktop slips upwards like on the screenshot (below on the link)
2. The default input method switches to Latvian after connect (never used Latvian anywhere...).
On my Mac:
- System language: Hungarian
- Input language: Hungarian
On the server:
- System language: English
- Input language: Hungarian (default) + English
+: the app doesn't supports Retina display resolution :(
Screen Shot link:
db.tt/yYKN0arM

Hi,
1. The version 8.0.24308 offers updated functionality for full screen mode to users of OS X 10.7+:
OS X native: The native full screen feature for the Mac OS X version.
Custom: The custom full screen mode enables the multi-monitor feature in order to provide a better experience for users of Mac OS X versions 10.7 and 10.8.
Important information for users of 10.9: if you have disabled "Displays have separate Spaces" in Mavericks
(System Preferences > Mission Control) go to Preferences > Resolution in the Microsoft Remote Desktop client and configure the setting using the same option.
Please try the OS X native mode and see how it works.
2. The OS keyboard locale, is suggested to the remote PC. Therefore, please check the keyboard locale.
Hope this helps.
Jeremy Wu
TechNet Community Support

Issue with blank screen HP G60-447CL Notebook PC

Similar Messages

Maybe you are looking for