Issue with Bulk Load Post Process Scheduled Task

Hello,
I successfully loaded users in OIM using the bulk load utility. I also have LDAP sync ON. The documentation says to run the Bulk Load Post Process scheduled task to push the loaded users in OIM into LDAP.
This works if we run the Bulk Load Post Process Scheduled Task right away after the run the bulk load.
If some time had passed and we go back to run the Bulk Load Post Process Scheduled Task, some of the users loaded through the bulk load utility are not created in our LDAP system. This created an off-sync situation between OIM and our LDAP.
I tried to use the usr_key as a parameter to the Bulk Load Post Process Scheduled Task without success.
Is there a way to force the re-evaluation of these users so they would get created in LDAP?
Thanks
Khanh

The scheduled task carries out post-processing activities on the users imported through the bulk load utility.

Similar Messages

Issue with Bulk Load Post Process

Hi,
I ran bulk load command line utility to create users in OIM. I had 5 records in my csv file. Out of which 2 users were successfully created in OIM and for rest i got exception because users already existed. After that if i run bulk load post process for LDAP sync and generate the password and send notification. It is not working even for successfully created users. Ideally it should sync successfully created users. However if there is no exception i during bulk load command line utility then LDAP sync work fine through bulk load post process.Any idea how to resolve this issue and sync the user in OID which were successfully created. Urgent help would be appreciated.

The scheduled task carries out post-processing activities on the users imported through the bulk load utility.

Facing issue in Bulk Load Post Process in case of blank fields in csv file

Hi,
I ran command line bulk utility to create users in OIM through CSV file. I left few columns as blank which were not mandatory. After executing the bulk utility, user got successfully created in OIM but after that when i ran "Bulk Load Post Process" for LDAP sync then it changed the user's organisation to default organisation "Xellerate User" which is a major issue. It is happening only when i am leaving some column blank. Any idea why it is happening and how to resolve this problem? Need some urgent help!!

Hi ,
Thanks for your reply, the issue was we can not use DOD=Y due to the dependency of the Standard Version where other program fetches data from the same XML structure,
Any way we resolved this issue by re doing below post installation steps. And used a new schema with updated DTD and point that with the same logical schema.
1) Created a new schema for XML external database
2) Change the DTD file, keep it in the same location
3) Change properties file with new schema name
4) Test with the new schema for XML connection
5) Reverse engineer the BaseModel ITEMBRANCH only (Where we added additional XML Tags)
6) Bounce back ODI agent and Client
Thanks,
Pc

Retry "Bulk Load Post Process" batch

Hi,
First question, what is the actual use of the scheduled task "Bulk Load Post Process"? If I am not sending out email notification, nor LDAP syncing nor generating the password do I still need to run this task after performing a bulk load through the utility?
Also, I ran this task, now there are some batches which are in the "READY FOR PROCESSING" state. How do I re-run these batches?
Thanks,
Vishal

The scheduled task carries out post-processing activities on the users imported through the bulk load utility.

OIM 11g - Issue with Bulk Load Utility for Account Data

Hi,
We are trying to load the account data for users in OIM 11g using bulk load utility.
We are trying to load the account data for resource "iPlanet". For testing purpose, we made one account entry in csv file and run the bulk load utility. After the bulk load process completes, we have noticed that resource is provisioned to the user multiple times and multiple entries have been created in process form table.
We have tried to run the utility multiple times with a different user record each time.
The out put of the below sql query:
SELECT MSG FROM OIM_BLKLD_LOG
WHERE MODULE = 'ACCOUNT' AND LOG_LEVEL = 'PROGRESS_MSG'
ORDER BY MSG_SEQ_NO;
is coming as follows:
MSG
Number of Records Loaded: 126
Number of Records Loaded: 252
Number of Records Loaded: 504
Number of Records Loaded: 1008
Number of Records Loaded: 2016
Number of Records Loaded: 4032
We have noticed that each time the number of records loaded is increased to double from the records loaded in last run even when the csv file contains only one record.
Provided below are the parent and child csv file entries.
Parent file:
UD_IPNT_USR_USERID,UD_IPNT_USR_FIRST_NAME,UD_IPNT_USR_LAST_NAME,UD_IPNT_USR_COMMON_NAME,UD_IPNT_USR_NSUNIQUEID
KPETER,Peter,Kevin,Peter Kevin,
Child file 1:
UD_IPNT_USR_USERID,UD_IPNT_GRP_GROUP_NAME
KPETER,group1
Child file 2:
UD_IPNT_USR_USERID,UD_IPNT_ROL_ROLE_NAME
KPETER,role1
Can you please throw some insight on what could be the potential cause for this issue and how it could be resolved?
Thanks
Deepa
Edited by: user10955790 on Jun 25, 2012 6:45 AM

Hi Deepa,
I know from 'User load' perspective that is required to restart Oracle Identity Manager when we need to reload data that was not loaded during the first run.
So, my suggestion is restart it before reload.
Reference: http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/bulkload.htm#CHDEICEH
I hope this helps,
Thiago Leoncio.

Please HELP! issue with BULK LOAD in FDM 11.1.2.1

Please assist with a solution to the following error!
See log below
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:39] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic158050364335 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic158050364335.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:43:40] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 5036
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... You do not have permission to use the bulk load statement.
BULK INSERT POLFDM..tWkalnic46564644597 FROM N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.tmp' WITH (FORMATFILE = N'\\pochfm04\apps\POLFDM\Inbox\tWkalnic46564644597.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=221593,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:38] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpDataPump.fImportTextFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2011-10-07 13:55:39] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 4644
IDENTIFICATION:
User............................................. kalnickim
Computer Name.................................... POCHFM04
App Name......................................... POLFDM
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLOLEDB
Data Server...................................... pochfmsql01\hfm
Database Name.................................... POLFDM
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... BW
Location ID...................................... 751
Location Seg..................................... 5
Category......................................... ActSeg
Category ID...................................... 38
Period........................................... Sep - 2011
Period ID........................................ 9/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

Have you read the installation documentation? It appears that you did not take the time to do a basic level of troubleshooting. A simple Google search of the error message provides the root problem as well as the solution.
The forums are intended to be used when you have exhausted other options. Please be mindful of this and contributors time when posting further questions.
I have attached a google search result for the error "You do not have permission to use the bulk load statement."
http://www.google.com/#sclient=psy-ab&hl=en&safe=off&site=&source=hp&q=+You+do+not+have+permission+to+use+the+bulk+load+statement.&pbx=1&oq=+You+do+not+have+permission+to+use+the+bulk+load+statement.&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=1556l1556l0l2633l1l1l0l0l0l0l184l184l0.1l1l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=ebaa3ff8b466872e&biw=1920&bih=955

ECC 5.0 database instance install error in database load (post processing)

HI all!
The installation of the environment :
VM SERVER v1.03
ECC 5.0 /WINDOWS SERVER 2003
SQL SERVER 2000 SP3
DB INSTANCE install occur error in database load (post processing) step:
sapinst.log:
INFO 2008-10-16 14:20:54
Creating file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB\keydb.5.xml.
ERROR 2008-10-16 14:22:29
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log
ERROR 2008-10-16 14:24:59
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2008-10-16 14:26:30
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log
SAPSSEXC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142100
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: D010INC deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:3624 Location: rowset.cpp:5001
Expression: pBind->FCheckForNull ()
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: D010TAB deleted/truncated
SAPAPPL2.log
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142130
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPAPPL2.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: AGR_1250 deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: import of AGR_1250 completed (139232 rows) #20081016142200
(DB) INFO: AGR_1251 deleted/truncated
(IMP) INFO: EndFastLoad failed with <2: Bulk-copy commit unsuccessful:2627 Violation of PRIMARY KEY constraint 'AGR_1251~0'. Cannot insert duplicate key in object 'AGR_1251'.
3621 The statement has been terminated.>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: AQLTS deleted/truncated
(IMP) INFO: import of AQLTS completed (17526 rows) #20081016142456
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142456
SAPSDIC.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142230
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: DD08L deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142437
SAPPOOL.log:
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: START OF LOG: 20081016142530
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Aug 18 2008 23:28:15
D:\usr\sap\IDS\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPPOOL.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:\sql\ntdbms\storeng\drs\include\record.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\IDS\SYS\exe\run/R3load.exe: END OF LOG: 20081016142621
please help! thanks!

VM SERVER v1.03
can you please tell me what you mean with that? VMWare? Is that ESX-Server?
(DB) INFO: connected to DB
(DB) INFO: ATAB deleted/truncated
Interface access functions from dynamic library dbmssslib.dll loaded.
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed:3624 Location: p:sql
tdbmsstorengdrsinclude
ecord.inl:1447
Expression: m_SizeRec > 0 && m_SizeRec <= MAXDATAROW
SPID: 54
Process ID: 1120
3624 >
(IMP) ERROR: ExeFastload: rc = 2
I´ve seen those load problems under VMWare and on boxes hosted as Xen VMs.
Markus

Error in Database Load (post processing)

Hi, i have a problem when install the Database Instance. In the step "Database Load (post processing)". Error:
ERROR 2007-01-16 18:33:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:33:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:34:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:23
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:53
MSC-01015 Process finished with error(s), check log file D:\users\bpmadmin\install/SAPVIEW.log
ERROR 2007-01-16 18:35:54
FJS-00012 Error when executing script.
And I want to open the file SAPVIEW.log for check the error, but the file size is 300Mb.
Help me, please.
Jonu00E1

300 MB? are u sure? this is way too much imho...as i see you install sqlsrv (= win)...you can find a tail like tool for windows under http://tailforwin32.sourceforge.net ... but somehow i doubt you will succeed to load the file...
-> which sap rlz you're installing?
GreetZ, AH

Database instance install error in database load (post processing)

hi
i'm facing these errors during the ECC installation the operating system is Windows 2003 server database is oracle 9.2.
Error occured in database load (post processing) step
ERROR 2009-12-19 01:23:50
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPCLUST.log
ERROR 2009-12-19 01:49:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSDIC.log
ERROR 2009-12-19 04:08:20
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC_50_ABAP_NUC\DB/SAPSSEXC.log

Hi
(RFF) ERROR: invalid checksum in data file "E:/DVD2/EXPORT2/DATA/SAPCLUST.001";
current table was "EDI40"
Your install software is corrupt....
Did you copy the software to disk ? If so did you copy accross in binary mode ...
Mark

Issue with site load time when exported as HTML. Addressed?

Has the issue with website load time been addressed?
I believe the site attempts to load the entire image content at the initial visit - meaning any galleries with numerous pictures are all included when first getting to the site. This is causing a HUGE increase in load time. I was told when I last brought it up that it was an apparent issue that needed to be addressed.
Any type of resolution coming?
Site for reference: www.dkrecollection.com

Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

Database load (post processing)

Hi sap gurus,
I am installing ECC 5.0 database instance . from past 15 hours it is still at database load (post processing). can u please tell me how long it will take to complete whole installation.
thanks
vijay

Time it takes to do the database load is highly dependent on your system's CPU, RAM and disk IO.
On a real production type server it could be several hours, on a desktop type machine 15 to 20 hours would not be uncommon.

Issue with RFBIBL00 batch input processing

Hello ABAP Experts,
I am having issue with a speed of batch input session processing. If you can please help me resolve the issue.
I have a requirement to post liquidation document to clear open vendor down payment items and then to clear vendor invoice with liquidation. I have created a custom program to address this requirement where it uses the SAP program and Call Transaction.
For liquidation document posting, I am using the program RFBIBL00. The custom program has steps:
1. Submit RFBIBL00 via job to create batch input session
2. Close job
3. Submit RSBDCSUB via job to process batch input session
4. Close job
5. Wait for 15 seconds
6. Read job log to get liquidation document number
7. If no document posted then display error
The issue is when the job log is read it says u2018Session 10zrsbdcsubxxxxxxx is being processed by user in mode on serveru2019 and there is no error message or no document number with message number 312. So the program displays error message, stops and cannot perform the second step. If I check in the system after a couple of minutes I find the document posted. I also increased the wait time. But the first record processing always takes longer and the program finds as a failure. The program can process next several records with success.
I am looking for expert help if you please suggest how to resolve this.
Thanks & Regards.
Yashasvi

Hi,
Have you tried calling FM DEQUEUE_ALL before/after schedulling job?
Gouri.

Running powershell script with customer parameters as a scheduled task

tfl wrote:I guess I don't get why you are wanting thisMy regular tasks run,. and take data from data files. Want your batch to get processed today? Then add it to the queue file by 5:00 PM.. The task runs at 5:01 and works with whatever data is available. And if the file is empty, nothing happens each night. If you want to pass parameters like this, then why bother with a scheduled task? You'd need to remove the old one and add the new one each time. Which is extra work and complexity, especially if the task at hand is in any way 'dangerous' if run twice with the same data (ie you forget to change the task or remove it).I'm using a scheduled task to trigger the script, I'm using the "on event" trigger and then calling the script as an action. The method I was using before (calling via a bat file with the event Id hard coded into that"...

Hi all,Having one of those hair pulling issues where something should work but for some reason its blindly refusing not to!I've created this script that is a bit of an extension to the email on eventID for task scheduled. It basically pulls out the various information from the actual event and fires off an email to our alerting team to investigate etc.That all works great, but what I'm now trying to do is get it to accept a custom parameter so the actual event ID its looking for doesn't have to be hard coded and can be passed to it via the commandline etc. I've got it all setup and work great but for the life of me can't get it to work correctly when set as a scheduled task. This is what the command basically looks like:powershell -executionpolicy bypass -command "& 'pathtofile\script.ps1' -evtid 8004"The latter part is the customer...
This topic first appeared in the Spiceworks Community

Bulk load to change deferred task date

We initially loaded users with password expirations and a defered task we created to send them emails starting 15 days before the password expires. We want to move these dates out. Can we do a bulk load and change the dates?
Thanks,
Larry

the deferred task scanner is expensive too. so much so in fact, that we dont use it. in fact, we keep a users "nextTaskDate" as a queriable attribute, which lets us get a result set of users that have tasks on that date. no more iterating through the users to find them. with this, its much easier to do what i had reccommended earlier.
--Dana

Issue with Data Load to InfoCube with Nav Attrivutes Turned on in it

Hi,
I am having a issue with loading data to a InfoCube. When i turn
on the navgational attributes in the cube the data load is failing
and it just says "PROCESSED WITH ERRORS". when i turn them off
the data load is going fine. I have done a RSRV test both on
the infoobject as well as the cube and it shows no errors. What
could be the issue and how do I solve it.
Thanks
Rashmi.

Hi,
To activate a navigation attribute in the cube the data need not be dropped from the cube.
You can always activate the navigation attribute in the cube with data in the cube.
I think you have tried to activate it in the master data as well and then in the cube or something like that??
follow the correct the procedure and try again.
Thanks
Ajeet

Issue with Bulk Load Post Process Scheduled Task

Similar Messages

Maybe you are looking for