Issue with client configuration for CuciLync 9.2.5

Hi,
we are currently preparing the client configuration for CuciLync 9.2.5.
When CuciLync starts we don't want to see the CuciLync window in the foreground.
Therefore we use the 'hubvisible' setting.
%APPDATA% \Cisco\Unified Communications\Jabber\CSF\Config\jabberLocalConfig.xml
<userConfig name="hubvisible" value="FALSE"/>
In addition we use this setting in the file
ProgramFiles%\Cisco Systems\CUCILync\jabber-config-defaults.xml
At first it looks like that the setting works fine.
But CuciLync always resets 'hubvisible' to 'true'.
Any idea what needs to be done to ensure that the setting is not overwritten ?
Thanks in advance for your feedback
Best Regards
Carsten Lucy

that might help
http://mysite.voicebootcamp.com/index.php/free-video-labs/video/uc-collaboration-ccie-collaboration-chapter-4-1-voice-gatew

Similar Messages

Issue with IDE configuration for creating Webservice from EJB

Hi All,
       I was trying to create a webservice from a EJB(session bean).I executed following steps :
1. I created the bean in one EJB project.
2. Then created another Enterprise Project in whichEJB projects .jar file is included.
3. Now when i right click "ejb-jar.xml" to create a webservice ,webservice wizard
   appears in which Server and WS runtime configuration are set properly.
   But it displays following error message on the top : "Select a service Project Type".
   If i click on the link on the wizard to select a "service Project type" the drop down for the same comes empty.The value for 'Service Project' is already defaulted
as "Webservice Project ".If i go to windows->preferrences->Webservcies->ProjectTopology i found two entries in the service project type list :
                     1.Dynamic Web project
                     2.SAP Web Project
     But there is no entry for Webservice Type project.Can any one help me out
how to solve this issue ?
Thanks and Regards
Ashis

Hi Ashish,
perhaps you launch the Web service wizard from the wrong location (i.e. not selecting the SEI you want to use). Did you strictly follow the steps described in the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/44/f36fa8fd1d41aae10000000a114a6b/frameset.htm">documentation</a> for creating the web service?

Issue with ALE configuration for creating the idoc for Purchase orders

Hello,
I am trying to send the purchase order through message type configuration using ALE.
I am using idoc ORDERS05, message ORDERS, Process Code in Partner profile ME10.
In NACE transaction for the Application EF, Output Type NEU the ALE Configuration is done for Program RSNASTED Form ALE_PROCESSING.
I have done ALE distribution using BD64.
Now the problem is that when an order is created or changed in the message output of the PO I am seeing the status as yellow i.e.not processed.
In NAST table, the entry is there but on executing RSNAST00 nothing happens.
Please provide me the pointers to solve the given problem.
Regards,
Mayank

Hi,
Guess it looks like the output is getting proposed but its not getting processed. Check the output type configuration. Check the TIme Settings in the output type configuration.
It is possible to set the Time when the output must be processed. Is it on SAVE or is it set to other settings. If its set to via background job then the background job must be run to process the output types.
Check and let me know if all is fine at the output type configuration.
Cheers
VJ

I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test.

I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

I'm asking because ios5 introduced iCloud. You have to have updated to ios5 to see it.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

Are iPads built with different configurations for different countries?

Are iPads built with different configurations for different countries?

deebeeque wrote:
I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
Additionally, does Brazil have 4G?
I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

http://support.apple.com/kb/TS3694#error-1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

JOB WORK CHALLAN - CONFIGURATION related issue with client .

HI FRIENDS ,
CLIENT PROCESS
STAGE 1: CLIENT SENDING THE SEMI-FINISHED MATERIAL UNDER JOB WORK CHALLAN ( 57-F ) TO JOB-WORKER.
LET SAY 1000
STAGE 2: ONCE JOB-WORKER RENDERING (AFTER POLISHING-CLIENT REQ ) THE MATERIAL ,THEY WILL INTIMATE TO THE CLIENT BY MAIL OR PHONE.
LET SAY 500 ON 1.1.2012 , 500 ON 2.1.2012
STAGE 3: CLIENT RAISE THE INVOICE AGAINST CUSTOMER DEPENDS ON MATERIAL QUANTITY . AND SEND IT THROUGH MAIL TO JOB-WORKER.
STAGE 4 : JOB-WORKER DELIVERS THE MATERIAL TO CUSTOMER DIRECTLY( NOT TO CLIENT PLACE) ALONG WITH CLIENT INVOICE COPY.
STAGE 5 : JOB-WORKER UPDATE THE CHALLAN & RAISE THE INVOICE AGAINST THE SERVICE TO THE CLIENT .
REQUIREMENT :
1. HOW TO MAP THIS PROCESS IN SAP IN DETAIL?
2. HOW TO SHOW THE INVENTORY IN CLIENT'S PLANT?
3. DOES IT COMES UNDER RG1 REGISTRY(WHAT ARE THE DOCUMENTS NEED TO UPDATE )?

This is very sorted out topic.
You can find lot of link, which you can search with search term "JOB WORK".
Have look on some of the links, which I can suggest:
- SDN Article on [Direct Subcontracting Process (SAP SD & MM)|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0dbde93-6fa4-2c10-edb9-e477fa85b232]
- subcontracting
- Job work in SD subcontracting.
- SD - Subcontracting
Follow following path in IMG for Subcontraction Configuration:
SPRO - Logistics General - Tax on Goods Movements - India - Business Transactions - Subcontracting - Subcontracting Attributes
There Excise TT to follow is 57FC.
Regards
JP

Issues with Clients moving from Autonomous to LWAPP

I have a fairly large wireless rollout of access points at my hospital's main campus and then I have 41 remote sites that have approximately 3 to 10 access points at each location.
My problem is this, I just converted one site from 9 autonomous access point over to LWAPP. The site has a 10 meg metro Ethernet connection so I know its not the link back to me. We have 26 Motion Tablets with Atheros wireless clients at that location that utilize a Citrix application called Logician. We have been having some issues with the Motion tablets holding the Citrix connection, but once we converted this site, those clients have really been having issues.
There is a high density of access points so coverage is not an issue, but I didn't know if anyone else out there may have a similar scenario and could lend some advise as to why the LWAPP causes so many issues.
Thanks in advance.

Hi. LWAPP itself should not cause service to be worse; because of the dynamic nature of its settings, it should actually improve connectivity.
Do these wireless clients have access to any services (e.g. internet) that do not require use of Citrix? If so, how is the performance there? If you're getting consistent, reasonably quick internet access, but your Citrix session keeps failing; it may not be a WLAN issue per se.
I have done several implementations of Citrix over WLAN for hospitals. Most of the time if there are connection interruptions, it boils down to one of two problems.
1.) Interference: Hospitals are very hostile environments for RF. Various building materials, large machinery, and irregular shapes in the floorplan make it difficult for RF to travel consistently.
2.) Citrix settings: Citrix is a highly configurable application. There are session timeout settings which can be tweaked which may make the system more tolerant to momentary lapses in connectivity.
My suggestion would be to see if the issue is limited to Citrix traffic only; and if it is, look at how Citrix is configured. If you're finding sub-par performance with all wireless traffic, then maybe it's an interference issue that keeps knocking you off the WLAN. If that is the case, I would suggest a professional wireless consultant should come in and decide on the best methods for giving you more consistent service.
Hope this helps! If so, please rate.

Two issues with latest update for Windows

I have noticed 2 issues with the new update. When I have a file transfer I don't want, there is no longer a cancel link. Also, when saving a file transfer that I do want, it saved it to the default location and updated my preferences to always do that. It should respect the option setting to prompt me for a download location.

KenMadsen wrote:
My options are set to "choose a folder to save the file in each time", which is not being respected anymore. The above reply does NOT address the missing ability to cancel an unwanted file transfer.
Try again please.
As long as you have a bullet in "choose a folder to save the file in every time" then it will not save files to a folder or automatically accept incoming files. The main exception to that is the initiation of a file for the first time on the newer clients. If it pops up about the new automatic saving you would click on "settings" and toggle it back to you preferred setting. The only other exception to that are images. Images sent to you via a mobile are sent to the cloud and will be cached/downloaded into your media folder. That cannot be avoided. You can cancel ongoing transfers on your end but not pending transfers.
I made this graphic to better break it down:
If you find your Skype is not listening to your configuration changes beyond what was already mentioned, you can use the following program to reset your Skype configuration. You will need to exit completely out of Skype beforehand, otherwise the reset will be incomplete.
http://www.pcdust.com/Downloads/ListFix/ListFix.exe
You can then rerun through the wizard, perform an initial file transfer, reconfigure your settings and those settings should hold.

MGE - issues with pers. actions for delegation in ECC6.0 - management of global employees

Hi experts,
during implementation of MGE at my client we are facing issues with the personnel actions for delegation.
We were using the standard actions as follows, without success.
action Expatriation planning (81), IG 92 via PA40 --> new persno. has been created successfully, empl. status has been set to withdrawn, IT715 "host" has been set to "planned", IT710 has been filled (required fields only, no admin, no manager, no sending pers. assignment info), all payroll relevant ITs have been skipped (706 + 707)
IT715 has been set to "to be activated" via PA30
running of report RPMGE_Activation for newly created persno.(assignment nr), pers. action 82 Activation in host country, IG GE --> following ISSUES occure:
Action can not be executed via PA40 (is this normal behaviour?)
when running with report, employm. status changed to active
IT715 "host" has not been changed updated in status (should have been updated to "in progress", right?)
IT715 "home" has not been created (correct?)
IT710 has not changed
Background information:
> Switch MAINS is activated
> We are not going to use global payroll! No switch has been activated. Payroll will always run in home country, so the client does not want to use any of the py relevant ITs dealing with global employment.
Many thanks + best wishes,
Evelyn

Hi experts,
short update on our issue:
After several times of trying the same thing, the report worked out fine as it should for 82 and also in the next step for 83. IT715 is going to be updated correctly. We need to work with the report and not with PA40.
Some open questions remain:
- Set home assignment to active during delegation (not to inactive for payroll reasons in home country)
Documentation for RPMGE_Activation says
Home Activation (Active) (84)
Same process as described above, excpet that in the third step, the Employment Status field in infotype Action (0000) is set to Active if there are any trailing payments in the home country.
We understand that 84 is identical to 83 but employment status is different.
For action 84 a different IG is underlying (93) than for 83 (GE) and also it is called "Change expat.planning". The Action does not seem to work with the report as well.
>> Is this correct? Do we need to create our own Home Activation (Active) Action by coping 83, changing the employment status setting?
How do we need to configure Feature ACTCE then? EXPATACTHOME would need to have 2 entires at the end, no?
- End of delegation
Which actions are used for end of delegation? Are there standard once that we could not find?
We would like to set the host country to withdrawn and the home country back to active (also change of employee group in this case).
Also using the logic of IT715, is there any automatic way of changing the host country record to status completed, or would we use an exit action, including IT715 and set status manually?
Same question for home country.
Many Thanks,
Evelyn

Issues with client looses connection with 6.0.196.0

Hi,
We recently upgraded our Wisms to version 6.0.196.0 and after the upgrade we have seen the clients sometimes looses connectivity and has problems to connect. We use an network with 802.1x and PeapMschapv2 with dynamic WEP.
We have disabled aggresive load-balancing but still see the issues.
Any ideas anyone?
Regards,
Martin

Hi,
Any news for these problems? Did the version 7.x fix these CAPWAP UP/DOWN problems with HREAP APs? It seems that I'm having these same problems now. Local APs seems to be fine, but HREAP APs goes UP/DOWN with versions 6.0.196.0 and 6.0.199.4.
There are three 4404 WLCs, where are different sites' office and warehouse APs connected to. The environment is configured as N + N + 1
like following:
WLC1 is for officeAPs. APs are 1131 and they're configured as H-REAP
WLC2 is for warehouseAPs. APs are 1242 and they're configured as Local
WLC3 is for backup and I used this for testing.
After I updated all the WLCs at summer to version 6.0.196.0, there have been issues where the clients looses randomly WLAN-connections. But the complaints just came from the two largest offices. And these didn't happend immeaditly after the update, but after few months. It can be that the summer holidays was reason for it. After some investigations, I updated the WLC3 for version 6.0.199.4, which just got released at the time, and moved these two largest offices' APs to there. Complaints stopped but after a month the second largest office informed that the clients' disconnections started to raise again and the WLAN-network has become unstable again. First there was just couple of issues but it have been raised as the time goes by.
When I made some more investigation to this site, I noticed that the APs' CAPWAP goes DOWN and UP randomly for a second:
*Nov 12 07:39:29.537: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN
*Nov 12 07:39:29.590: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Nov 12 07:39:29.590: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Nov 12 07:39:29.759: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
*Nov 12 07:39:29.811: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Nov 12 07:39:29.812: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Nov 12 07:39:29.849: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Nov 12 07:39:29.850: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Nov 12 07:39:29.889: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
Then I investigated some more and noticed that this happens on all of the H-REAP APs and almost in the same time:
*Nov 12 07:39:29.537: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC3, second largest site's AP (6.0.199.4)
*Nov 12 07:40:17.439: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC3, second largest site's other AP (6.0.199.4)
*Nov 12 07:41:20.297: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC3, largest site's AP (6.0.199.4)
*Nov 12 07:42:31.928: %CAPWAP-5-CHANGED: CAPWAP changed state to DOWN - WLC1, random site's AP (6.0.196.0)
When I checked the warehouseAPs, which are configured as local in the WLC2 (6.0.196.0), there was nothing like this in the logs. Logs are clean.
But when H-REAP is configured for these APs, the clients should not be disconnected when the CAPWAP goes down? And this whole "process" seems to last just for a second. Not sure if this is the real reason for these client disconnections, but at least this is not normal. I haven't heard complaints from smaller sites, even when APs at them also does the same.
I don't feel great to update the WLCs for the version 7.x, because it just seems to be new feature release, but if it fixes these, then I should think about it. Has someone, who had these same problems, got this fixed with version 7? Or has TAC provide some other patches for this?
Thanks,
Joni

APEX Listener 1.1.4 install issue with listener configuration

Oracle XE 11gR2
APEX 4.1.1
APEX Listener 1.1.4
Glassfish 3.0.1
=============
Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
Any ideas?

Hi,
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
But perhaps the error disappears as soon as you also get a proper configuration page.
-Udo

Issue with client configuration for CuciLync 9.2.5

Similar Messages

Maybe you are looking for