Issue with Crystal Report based on 2 different data sources

Hi there,
I am having a frustrating problem with a report I've designed and I'm hoping someone might be able to assist please.
The report has 3 different prompts, each of which is based on a dynamic list of values retrieved via views within a SQL server db.
We are wanting to introduce the use of Universes as much as possible, so the data returned is based off a BO Universe data source query.
I have uploaded the report into BO and have provided the necessary database logon information for the report (in the "Process" > "Database" settings in the CMC) for both the direct db datasource connection (for the views) and the BO Universe query connection.
When the report is run however, the report still prompts for the database user name & password credentials. I have triple checked my db connection settings, and also have "Use same database logon as when report is run" set to true. I also tested a cut-down version of the report without the Universe connection with the same db logon credentials I provided and there was no credentials prompt when it was run, proving those values are accepted.
Does anyone know why this is happening & if there is a way around it? Alternatively, is there some way that a report prompt may be based on a dynamic list of values retrieved via a Universe connection? This way I'd be able to remove the db connection for the views and have the report solely based on the Universe.
Another issue that occurs is out of the 3 prompts, a user can select a User Name OR Number, and also must select a Period. However if the User Name or Number is left blank the message "The value is not valid" is shown. So I tried a cut-down version of the report with only the BO Universe as a data source (static prompts) and this didn't occur, i.e. I was allowed to leave either the User Name or Number empty.
I hope this all of makes sense - let me know if not. If anyone is able to help out with any of this it would be very much appreciated.
Cheers,
Marco

Please re-post if this is still an issue to the Business Objects Forum or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

Single Crystal Report based on Five different SAP BEx Quries.

Hi,
I need to create 5 different Charts (in a single report) based on five different SAP BW BEx Queries. These are charts with 3- axes i.e. X,Y,Z.
The example requirement is to create Line charts (Vertical Mixed Line Charts) and deatils are as follows: The chart should show CPU Utilization % for different servers (eg. Servers1,2,3,4,5) for each day in a particular month.
Axes details:
X- Axis - Date eg: 01 /09/2010 to 30/09/2010
Y-Axis - CPU Utilisation Percent
Z-Axis - Servers from 1 to 5
The above detailed chart comes from a BEx Query . In this way there are four more BEx queries which should give four other charts.
My queries are:
1. Is this possible to create a single report using five different BEx queries and Create 5 different charts(one chart from each BEx Query) in a single tab as in the current manual report.(All the five Line charts should be downloadable to a single sheet in Excel)
2. One more, should I use Crystal Reports only? The charts are of high format natute so Web Intelligence will not produce the same. Is any other tool that helps for this requirement.
3. I can create five different Universes based on BEx Queries. Is this possible to create a single report from five different Universes.
Please advise.
Nanda Kishore.
Edited by: Nanda Kishore B on Oct 21, 2010 8:05 AM

To start with you cannot use SAP BW universes in Crystal Reports., YOu have to use the BW MDX driver.
For performance reasons I would suggest to add 4 subreports into your main reports containing each on of the 4 remaining charts.
Regards,
Stratos

Performances with Crystal Reports (based on BW queries)

Hi,
I've created some Crystal reports based on BW queries, and I'm really interested in performances purposes. The BW queries I created are quick (with neither free characteristics nor hierarchies), and when I use them in a Crystal report, I identify a loss of time in the data extraction (BW --> Crystal), in the Crystal management of the layout and then in the publication to BOE.
To be able to use Crystal on BW queries is very useful, but if the response times are too much important, that's not good...
Is there any customizing to perform to get better performance ? Are there some analysis already performed with Performance point of view ?
If you have any best practice or piece of advice to shorten the response time in Crystal reports, I'm really interested in.
Thanks for your replies,
Best regards
Jonathan

Hi,
there are many SDN threads or forums dealing with the integration BW and Crystal.
You should have a look to the forums created by Ingo Hilgefort (SAP expert on the BW-BO integration).
You can start with that one :
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Best regards,
Jonathan

How to bulid a Crystal report based on Bex query as source

Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,

Hi
The Crystal Reports are integrated with BW such that the query built in BW can be used to bulit Crystal Reports on them.
After launching the Crystal Reports, you will have and option : "Open reprt from BW" whcih will help you in opening the BW Queries and create Crystal Reports.
Also in the Menu there is an optin SAP-->Create New Report from a Query
Regards, Hyma
Edited by: Hymavathi Yanamadala on Aug 13, 2009 5:52 AM

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

Performance Issues with crystal reports 11 - Critical

Post Author: DJ Gaba
CA Forum: Exporting
I have migrated from crystal reports version 8 to version 11.
I am experiencing some performance issues with reports when displayed in version 11
Reports that was taking 2 seconds in version 8 is now taking 4-5 seconds in versino 11
I am using vb6 to export my report file into pdf
Thanks

Post Author: synapsevampire
CA Forum: Exporting
Pleae don't multiple forums on the site with the same question.
I responded to your other post.
-k

Issue with Crystal Report export to PDF

Have a report in Crystal Report 2008. The report runs fine, but would like to export it to PDF/EXCEL, but nothing happens when I select the Export type(i.e. PDF,Excel, etc).
Steps to replicate:
1. Run Crystal Report
2. Click on EXPORT button.
3. Select the Export type (PDF).
4. Click on EXPORT - Nothing happens nor does it return any error.
Would someone be able to provide some tips on this issue
Thanks

The problem is that the 3rd party is using some CR SDK. We don't even know what SDK that is. They should be coming here and asking us to help them on your behalf. It is almost impossible for us to help, not knowing how they implemented the SDK, which SDk, etc..
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Issue with Crystal Report Server

Hi,
I have a .Net application that uses Crystal Reports Server. The application runs from two servers through load balancing and one of them hosts RAS(Report Application Server) component as well. The issue I am facing is that the server that does not host RAS gives a timeout error periodically when reports are run, inspite of RAS running fine in the other server.
Can anyone let me know if this problem has been identified before?
Regards,
Ashwin

Hi Ashwin,
What is the error message you are getting?
After how many minutes does the timeout error occur?
What is deployed on each of these 2 servers?
Can you please provide some more details on the workflow that causes the timeout?
Thanks
Jonathan

Issue with Crystal Report & SAP B1 8.8

Hello,
I imported my crystal report in SAP.
When I want to edit the report throught SAP, it opens the report on crystal report session.
The problem is when I want to save the file. It wants to save in a temporal file.
How I can solve it ? where SAP save the .RPT flie ?
Thanks

Hi,
You can save your edit CR (Crystal Report) in .rpt file.
Once you have imported CR
Admin > Setup > General > report n layout....
Select Your CR
Click on Edit button
now new window is open that is CR in editable form
Go in File Menu of CR > Save As > "Give your location"
Which will save as .rpt format....
Thanks
King Kevin

Issue with crystal reports 2008 clickonce fix pack 1.7

Hi,
When we try to extract the crystal reports 2008 clickonce fix pack 1.7 then we get a message saying that the zip file is corrupt. Anyone got this problem or has a solution for it ?

Hi;
It should be updated in the next few days. In the meantime, You can use the following download. It contains the msi and should work for you as well
https://smpdl.sap-ag.de/~sapidp/012002523100007863642009E/cr120_fp17_redist_install.zip
Regards,
Jonathan

Issue with Crystal Report integration with SAP Portal

Hi,
Crystal Report using Crystal Reports 2008 trail version is created.This .rpt file is present on my desktop and I would like this report to be published on SAP Portal.Can anyone please let me know steps to do so?
Regards,
Madhu.

You need to install SAP integration kit. There are some configurations you need to do.Please go through the below URLs for more details:
[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End]
[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End]
Publishing:
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End?blog=/pub/wlg/11144]
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End?blog=/pub/wlg/11146]
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414800)ID0872910550DB10406683879540656926End?blog=/pub/wlg/11147]
Hope this helps!!!

Crystal Report runtime error while changing Data Source Location

Dear All
We are using "Crystal reports for SAP Business one".The Crystal reports version is 12.1.
We built a report in another database with another server.
As we are importing the report in another database of another server,
I am not able to change the Data Source location.
When I am trying to change it,it gives Runtime error and closed automatically.
How can i resolve and change the data source location?

hi kambadasan,
is your CR version the same from which you design the report and to the another server? also did you import your report directly to SBO without changing the data source first? in the case you should update first your Data Source in Crystal Report IDE before importing it to SBO.
regards,
Fidel

Crystal Reports 2008 using Outlook/Exchange data source

Hi experts ! We are running a BOXI r3.1 FP 3 on dev and prod.
I recently built a report that uses the Outlook/Exchange data source, where a Sharepoint Calendar is shared to Outlook.
The report runs fine in CR 2008. I publish it to the Enterprise, and the report runs fine on-demand or VIEW. IF I schedule the report it fails with either
Object failed to run due to an error while processing on the Job Server.
or
Error in File ~tmp13bc6e93b8d9690.rpt: Unable to connect: incorrect log on parameters.
Is there some magic format for the user Id and password for exchange?
it seems like the job server is not handling the connection correctly.
Any ideas or comments would be appreciated.
Thanks
Zak

I'd love to know more how I can query my Outlook Exchange Server, specifically for the keywords "Good News" in the Subject line.
Any ideas?
I'm fairly new to Crystal Reports.

Use same report to print out different data sources on the fly.

Post Author: Lady101
CA Forum: Data Connectivity and SQL
We have 10 reports use diferent datasource( use views with different joint tables), but their print out format are identical. Is there a way to just use single report to run those 10 reports dynamically(the report can point to the right data source on the fly)? So that we can just change single report format when report format needs to be changed. Right now we have to change 10 reports format one by one.

Another option would be to make a single pass in the Source Monitor and save a bunch of subclips. Here's a thread discussing keyboard workflows: Re: Question on making many Subclips in a fast way
If you name highlights with one base name and lowlights with another, it would be easy to drop each batch into its own sequence.

Issues with Infoview data refresh on Crystal Reports based on BW BeX query

Hi all,
We applied the Business Objects XI3.1 fix pack 3.1 with Integration toolkit fix pack 3.1 in our environment.
After that we started having trouble with Crystal Reports based on BeX queries that use manual input variables.
The data refresh would not work in Infoview.
The data refresh would work using the Crystal Reports designer gui on local machine.
regards,
Abhishek

Hi all,
This thread is for the benefit of all the BW/BO people who faced issues with BO reports not working after certain fix pack installations.
After lot of time spent in debugging this and researching and some help from SAP, we found that BASIS had missed a step in the BO patching. This step was relating to applying some BW transports in the BW system related to the new Integration toolkit.
Please use below notes for the BW transport task of patching BOE Integration toolkit.
Refer to Note#1472104 which explains about loading the
transports when we install BO Service Packs or Fix Packs. Also please refer to the Note#1271751 for the advice on transports for BW systems.
Please go through page 206 (Configuring transports) in the SAP Integration Kit installation guide. You can download this document at below link.
https://websmp106.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
Refer to Note#1345919 which explains about the process of loading transports for SAP IK.
regards,
Abhishek

Issue with Crystal Report based on 2 different data sources

Similar Messages

Maybe you are looking for