Issue with Data sources

Hi Gurus,
           I have issue like can I use one data source for more than one info source.
           And one more thing is it necessary to add key figures in Comm Struc, and in Tran. Struct.
           Please I am still in starting stage of BW. If any have idea give me a advice or email me to [email protected]
Regds
Dayakar Reddy.

Hi SK,
      Acutally I need only two fields from data source like Document Type and Purchasing group. Can I select only this two field from the list which already existing in Comm Struct and in Tran Struct.
      Does it work out and one more thing about key figures Here I need to include key figures as well......
       Please give me good advice where I come acros this issue....
Regds
Dayakar Reddy

Similar Messages

Issue with data source after deploying

We are experiencing an issue with our data source after deployment of a cube. On the datasource properties in Visual Studio 2012, we have the max connections set to 0 before the deployment. Once the cube is deployed, I can navigate to the <name>.0.ds.xml
file and open it and see that the <MaxActiveConnections>0</MaxActiveConnections> is indeed set to 0. At some point over the next couple days, a process of the cube or some other action causes that value to get updated to some number too large to
be converted to an int, and makes the datasource invalid. At that point we cannot view the datasource properties in SSMS, we cannot open the cube project from Visual Studio, and we’ve even had failures when trying to process the cube. Is there a config
somewhere that would cause this value to get overwritten, or some other behind the scenes process that we can look at?
Our server information is:
Microsoft SQL Server 2012 (SP1) - 11.0.3153.0 (X64)
                Jul 22 2014 15:26:36
                Copyright (c) Microsoft Corporation
                Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
Chad Dotzenrod SWC | TECHNOLOGY PARTNERS 1420 Kensington Road, Suite 110 Oak Brook, Illinois 60523-2144 http://www.swc.com

Typically you would import the metadata from the source location and either use that location as the data source (and so not need to redeploy), or deploy it to a separate target location.
The replace action is destructive as you've found, and effectively performs a drop table followed by create table. Hence any data in the table is lost.
If you just want the Control Center Manager to correctly display that the table is deployed, try setting the action to "Upgrade". This will try to upgrade the deployed object to match the definition in OWB, but as the two are identical this will result in no changes. However, it will update the deployment records to indicate that the object is deployed.
Nigel.

10.1.3 Migration Issue with data-sources.xml

Hi:
Running into lots of migration issues for an application built in 10.1.3 EA, migrating to 10.1.3. production, mostly in the BC project. Here's one: the database connections built in EA were not carried over to prod, so they needed to get re-built. No biggie. But now the data-sources.xml file in the model project has duplicate entries for my data sources. I have tried directly editting that file and removing the duplicates, but when I go to run my application (ADF Faces & ADF BC) JDeveloper hangs. When I abort JDev and re-start it, the duplicate entries are back in data-sources.xml (and yes, I did save the file after making the changes). It seems that the xml file is built dynamically from definitions stored elsewhere. Where is the source? What will I need to modify to get the changes to take?
Thanks.
Johnny Lee

There is new control over when/whether JDeveloper add/updates your data-sources.xml file for the embedded server. The settings are located here:
Tools | Embedded OC4J Server Preferences | Current Workspace | Data Sources
There are some settings there that control whether/when we update the data-sources.xml

Issue with Data Provider name in variable screen for BEx Analyzer

Hello all,
We got an issue with Data Provider name in Variable screen in BEx Analayzer.
We want to change the DataProvider name there to Description of the report instead of its Technical name.
Any inputs are appreciated.
Thanks
Kumar

You have to create a workbook to do this.
Refresh your query/report. In Bex analyser, there is one toolbar named BEx design toolbox, If you are not able to see it in analyser, right click on the toolbar space of BEx analyser and click on BEx design toolbox. Here, goto to design mode, by clicking on a sysbol like 'A'. after that place the curser where you want to see the Query description. and click on insert text (T) in BEx toolbox. click on it and check "Query description" in constant tab. in the general tab you need to assign a dataprovider, for that assign your query name in workbook settings (in Bex design toolbox). also check the "display caption" in general tab.
Pravender

Issue with data dictionary -Table maintanance generator

Hi all,
I have an issue with Data dictionary, table maintenance generator. I have entered some records in a custom table (ZBCSECROLETOGRP) and changed the delivery class from C to A. When I create the table maintainance generator, I am encountered with the following errors:
1)Field ZBCSECROLETOGRP-PORTALGROUP shortened (new visible length: 000032)
2)0012 could not be generated
3)In TCTRL_ZBCSECROLETOGRP field LENGTH has the invalid value 01
My main motto is to create the table maintainace generator and transport to the furthur systems .
Please help.
ThnX in advance,
Vishal..

HI,
Regenerate the table maintenance by selecting the checkbox of "Modified field structure" => new entry & then save.
Also ensure that the new changes are not affecting old data bcz of data type changes. If that is the case, then delete the old records, regenerate table maint. & re-enter those records which you had deleted.
Thanks,
Best regards,
Prashant

Issue with Date Format

Hi All,
I m facing an issue with Date format in the prompt. I have used date presentation variables in my column formula as shown below:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" <= DATE '@{todate}{2900-01-01}')
The report returns data when I don't select any date range for start & end date prompts on the page. But when I select the start & end date values in the prompt, I m getting the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 10/22/2009 12:00:00 AM from 10/22/2009 12:00:00 AM does not match the specified format. (HY000)
I included the following formulas for start & end date prompts:
Start Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.1900' as date) end
End Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.2900' as date) end
Can you please help me resolve the issue.
Thanks,
Kartik

Hi Nico,
I tried putting the format that you mentioned, I m getting an error message.
My prompts have the following formula :
Start: case when 1=2 then License."Creation Date" else cast('1.1.1900' as DATE) end
End: case when 1=2 then Time."Calendar Date" else cast('1.1.2900' as DATE) end
My column formula has the following syntax:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" between DATE '@{start}{1900-01-01}' AND DATE '@{end}{2999-01-01}')
Error Message:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 11/17/2009 from 11/17/2009 does not match the specified format. (HY000)
Can you please let me know if something needs to be changed.
Thanks,
Kartik

Failed to acquire DAS with data sources that match the specified OCE

Please help, Thank you all.
We are migrating Oracle databases from Windows to Linux servers. Currently, I have no problem to use my desktop Hyperion Intelligence Designer 8.5 with new oce file to connect to Linux. However, I published the same oce file to Hyperion Performance Suite 8.5 then I got “Sever Error [2018]: Failed to acquire Data Access Service with data sources that match the specified OCE”.
I launched Service Configurator, in the “Local Service Configurator - DAS1_host”, the “Database JDBC URL is point to Linux server. Also, I added ODBC connection to Oracle database on Linux in the “Properties of Data Access Service: DAS1_host’s Data Source”. Database of JDBC URL in BI1_host, AZ1_host, PUB1_host, SM1_host, LS1_host, UT1_host, BPS1_host, AN1_host are also point to Linux server.
The “Remote Service Configurator” has ES1_host’s” Storage” with JDBC URL point to Linux server. The same for RM1_host’s and NS1_host’s “Storage” with JDBC URL point to Linux server.
Is there some missing configuration on the server? Thank you in advance.

You should login to my oracle support to look into this ID.
This is the solution mentioned
Solution
1) In the .profile file, you will find the definition of the LD_LIBRARY_PATH variable. However, the path to 64 bit libraries is probably appended before the path to the 32 bit libraries(%ORACLE_HOME%/lib32). Therefore, please reverse the order in the definition so that the 32 bit libraries get loaded before the 64 bit libraries.
Then, restart all services.
2) Oracle 9.2 was the first Oracle release which defaults to using the 64 bit libraries in the 'lib' directory and the 32-bit libraries that we need are in the 'lib32' directory.
Therefore, please have the%ORACLE_HOME%/lib32 placed in front of the LD_LIBRARY_PATH environment variable definition.Then, restart all services.
3) Please check that users have read and write access to the files located in the %ORACLE_HOME%/lib32 folder.
4) Check the permissions of the libclntsh.a file(located in the %ORACLE_HOME%/lib32 folder) are set to rwxr-xr-x
5) Recreate the OCE connection in DAS and restart DAS in CMC.
6) Restart all the BIPlus Services and process the query.

Issue with Date format - ABAP to XML

Dear Users,
We are currently facing an issue with the date formats in XML.
We have a system (.Net), which has a webservice that we are calling for information from SAP. We created a Proxy class in SAP from the WSDL file and have attempted to use the method that gets us required information based on the Timestamp passed from SAP. However, the timestamp that the INPUT structure uses has a data element XSDDATETIME_Z.
All we can send from SAP is a simple TIMESTAMP, but the .Net system doesn't accept it since it wants the timestamp in XML format i.e. <dd-mm-yyyy>T<hh:mm:ss>Z. SAP documentation says that the field should automatically do conversion from ABAP to XML format, but that doesn't happen. We don't want to build a string from Timestamp in the XML format and send it out since we might surely miss out on the different cases involved.
Can anyone please suggest a way for us to send the date out in the required XML format?
Many thanks!

Hi Vijay,
Look at the below sample code and it works fine, i guess there is something wrong in your code or conversion, post the actual code if you are still not able figure it out with the below example.
DATA: l_xml_string TYPE string,
      l_dat_time TYPE xsddatetime_z.
CALL FUNCTION 'CACS_DATE_GET_TIMESTAMP'
EXPORTING
   I_DATE                         = sy-datum
   I_TIME                         = sy-uzeit
IMPORTING
   E_TIMESTAMP                    = l_dat_time
EXCEPTIONS
   DATE_NOT_FILLED_BUT_TIME       = 1
   DATE_HAS_NO_VALID_FORMAT       = 2
   OTHERS                         = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL TRANSFORMATION id
SOURCE root = l_dat_time
RESULT XML l_xml_string.
IF sy-subrc EQ 0.
write: l_xml_string.
ENDIF.
Regards,
Chen

Connectivity issue with Oracle Source

Hi,
Am trying to run a SSIS package to pull data from Oracle. Package was running fine from BIDS.But when i run the job from Sql Agent am getting the below error.Can you please help me on this.Am using 2012 version of SSIS
Message
Executed as user: ABCDEF\SQLDEV015. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5548.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:32:29 PM Error: 2014-12-22 21:32:31.32
Code: 0x000002BD Source: Package4 Connection manager "ORACLE" Description: Oracle Home not found. End Error Error: 2014-12-22 21:32:31.32 Code: 0x0000020F Source: Connect
to ORACLE Oracle Source [2] Description: The AcquireConnection method call to the connection manager ORACLE failed with error code 0x80004005. There may be error messages posted before this with more information on why the AcquireConnection
method call failed. End Error Error: 2014-12-22 21:32:31.32 Code: 0xC0047017 Source: Connect to ORACLE SSIS.Pipeline Description: Oracle Source failed validation and returned error code 0x80004005. End
Error Error: 2014-12-22 21:32:31.32 Code: 0xC004700C Source: Connect to ORACLE SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-12-22 21:32:31.32
Code: 0xC0024107 Source: Connect to ORACLE Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:32:29 PM Finished:
9:32:31 PM Elapsed: 1.422 seconds. The package execution failed. The step failed.

Hi SSDL,
According to the error message, the issue is that the user cannot connect to the Oracle server. To fix this issue, please refer to the following suggestions:
Verify the Oracle server is installed on the server that the connection string indicates. It means that verify the connection string is incorrect.
Does the user that runs the package the correct
authorization?
Check if the SQL Agent job step that runs this package is set to run it in 32 bit mode.
The following two similar threads are for your references:
http://stackoverflow.com/questions/26790105/ssis-package-fails-in-sql-server-agent-but-not-in-visual-studio-odbc-connectio
http://www.attunity.com/forums/microsoft-ssis-oracle-connector/issues-pulling-data-oracle-package-fails-1472.html
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

ISSUE WITH DATE COLUMN

Hi All,
I have a table(Revenues) and a view(locations) using which I have created a crosstab report
which has a date as a column in the table and rows contain Region and location and Summary column has the revenues.
Due to some issues I have again created another view which took data from both these (view and table) and I replaced the view in crystal report and build the cross tab.
Now I am unable to change the date time format ( Cross tab column) in the new view as it shows datatype as string.
I need to convert the date i.e this string in form ( yyyy/dd/mm hrs:minutes:sec ) to (mmm - yy)
How can i Acheive this.??
Thank you,
Nani

Hi
I have solved that Issue By making changes in the view.
But now I am struck with some thing else...
Here Is the Scenario.
Revenues Table has Three Colums ( Date, Revenue, Site _CODE) >>>> It has 650 rows
Locations VW has these columns ( Site_Code, site_DESC, Region,...................) It has 65 Rows.
For a cross tab I need Region and Site_Desc as Rows and Date as a Column And revenue as Summary column ( for month)
I was unable to retrieve all the Site Desc for a region in crystal reports ( Also tried outer joins in LInks tab)
So i have created a new view from both of the above which has ( date,Revenue, site_code,site_desc,Region) and updated it in the Data source location of crystal reports.
I am getting all the data from past 5 years (which has 65 rows in the crosstab)
But when I am trying to filter it to 2010 data It gives only 24rows of data ( I am loosing site desc in the regions.)
I need all the site Desc in table whether they have a revenue or not.
How can I do this.
I have tried applying the select expert but got no luck.
Your assistance will be appreciated.
Thank YOu.

Problem with Data source- full load is not extracting where as delta can.

Hi All,
I have a problem in loading of the region values into BW.
Data Source 0CRM_OPPT_I is used to fetch opportunities ( same as Sales Orders in ECC) from CRM system.Data source has a field 0CRM_TR which gives the values of region values pof the employee responsible. problem here is that CRM_TR value is not being fetched when the record was first created, but the value is being flown to BW in the delta run i.e. when a change happened in record.
Please anyone help us out in resolving this issue.
Regards,
Haaris.

Hi Hari.......
Hav u done init........if yes........What u hav done....I mean.....init with or w/o data transfer.....?
It has picked records or not? if yes...........after init.........hav u checked the Delta queue(RSA7) in the source system...........is the Total field is 0 or not.........if 0..then....
Look if u r using Direct delta.then after init.any changes or new records will get recorded in the Delta queue(RSA7) directly..........but if the Update mode is Unserialized V3 update or Qued delta.then data will accumulated in the Update table and the Extraction Queue respectively...........in that case u hav to schedule V3 jobs to pull them in RSA7............otherwise delta load will pick 0 records only........
Check the update mode of the Datasource in LBWE.......
Check this..........it may help u........
Steps to do init load from CRM
Regards,
Debjani.......

Issues with data usage Samsung S5

Over the past few months I have been paying outrageous bills due to one of my lines eating all my data when there is no one even touching the phone. I have 3 phones and a tablet on my plan and I am paying 288.00 a month and last month they charged me 15.00 for overage usages because it went over on the last day of the billing cycle. Once again that one line ate up all the data even though it's connected to our wifi or just sitting dormant. I am getting sick of paying these outrageous prices and am about to go somewhere else. I was tricked into the 10.00 a month tablet fee when I signed two phones up under the verizon edge plan. the sales clerk did not tell me I could not cancel the 10.00 a month fee because it would be under a year contract nor did I sign anything saying that, but when I went back in to change the 3rd line over to the Edge plan they told me it would be a $300 or so disconnect charge. So of course I am still paying 10.00 a month for no reason because I have wifi in my home and I only use the tablet in my home. so i need help with trying to figure out the data issues with just one of my lines. I do not have bluetooth on or location. I have went to the play store and uninstalled everything I could. I constantly close out of my applications and clear history etc.,,

So you thought they would just give you a free tablet at $10 a month and it didn't need to be in a contract like phones? I took the free tablet too but common sense told me it was locked into a contract, I didn't even ask as I just knew that would be the case but I didn't care. Mary

Performance issues with data warehouse loads

We have performance issues with our data warehouse load ETL process. I have run
analyze and dbms_stats and checked database environment. What other things can I do to optimize performance? I cannot use statspack since we are running Oracle 8i. Thanks
Scott

Hi,
you should analyze the db after you have loaded the tables.
Do you use sequences to generate PKs? Do you have a lot of indexex and/or triggers on the tables?
If yes:
make sure your sequence caches (alter sequence s cache 10000)
Drop all unneeded indexes while loading and disable trigger if possible.
How big is your Redo Log Buffer? When loading a large amount of data it may be an option to enlarge this buffer.
Do you have more then one DBWR Process? Writing parallel can speed up things when a checkpoint is needed.
Is it possible using a direct load? Or do you already direct load?
Dim

Issue with Date showing Null in interactive report

I created an interactive report for a customer and was confused to see blanks or more specifically dashes where there should be dates in one of the fields. I knew this field should have data so I did some testing and this is what I have found:
The sql I am running is:
select
assigned_to_company,
last_resolved_date,
incident_id
from
rhpd0009_im_adherence_rpt2_vw
When I run the command in SQL workshop I get the following results with data in the last_resolved_date field:
[http://i83.photobucket.com/albums/j299/yogibayer/apexdateissuesqlcommand.jpg]
I copied and pasted the SQL from SQL workshop and created a new interactive report and got the following results with no last_resolved_dates showing up:
[http://i83.photobucket.com/albums/j299/yogibayer/apexdateissueinteractivereport.jpg]
For some reason the order is different, but the first one INC1117629 shows up in both of them and has a last_resolved_date in SQL workshop, but not in the interactive report. Any help would be appreciated.
Thank You
Scott

Varad,
It seems to be related to the function we use to convert Remedy dates to Viewable dates. Remedy dates are stored as an integer that represents the absolute number of seconds from Jan 1, 1970 at 12:00 AM. We use a function that converts this number into a human readable date. I have tried encapsulating the result of the function in a TO_DATE and a TO_CHAR with the same results as before. There is something about the resulting data from the date convert function that Apex doesn't like. It would be interesting to isolate what exactly the issue is, but right now I'm just trying to find a work around.
Thank You
SCott

Help to read a table with data source and convert time stamp

Hi Gurus,
I have a req and need to write a ABAP prog. As soon as i excute ABAP program it should ask me enter a data source name, then my ABAP prog has excute teh code, in ABAP code i have to read a table with this data source as key, sort time stamp from table and should display the data source and time stamp as output.
As follows:
Enter Data Source Name:
Then user enters : 2lis_11_vahdr
Then out put should be "Data source :" 10-15-2008.
The time stamp format in table is 20,050,126,031,520 (YYYYMMDDhhmmss). I have to display as 05-26-2005. Any help would be apprciated.
Thanks,
Ram

Hi Jayanthi Babu Peruri,
I tried to extract YEAR, MONTH, DAY separately and using
EDIT MASK written it.
Definitely there will be some STANDARD CONVERSION ROUTINE will be there. But no idea about it.
DATA : V_TS      TYPE TIMESTAMP,
       V_TS_T    TYPE CHAR16,
       V_YYYY    TYPE CHAR04,
       V_MM      TYPE CHAR02,
       V_DD      TYPE CHAR02.
START-OF-SELECTION.
GET TIME STAMP FIELD V_TS.
V_TS_T = V_TS.
CONDENSE V_TS_T.
V_YYYY = V_TS_T.
V_MM   = V_TS_T+4(2).
V_DD   = V_TS_T+6(2).
V_TS_T(2) = V_MM.
V_TS_T+2(2) = V_DD.
V_TS_T+4(4) = V_YYYY.
SKIP 10.
WRITE : /10 V_TS," USING EDIT MASK '____-__-________'.
          /10 V_YYYY,
          /10 V_MM,
          /10 V_DD,
          /10 V_TS_T USING EDIT MASK '__-__-__________'.
If you want DATE alone, just declare the length of V_TS_T as 10.
Regards,
R.Nagarajan.
We can -

Issue with Data sources

Similar Messages

Maybe you are looking for