Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

ITunes issues with Windows XP - crazy error message

I've been using iTunes with XP and have no issues for years now. Today, when I went to open iTunes I received a message that Windows was configuring iTunes for installation. I am unable to complete installation and I receive this message..."Error writing to file C\Program Files\iTunes\iTunesResources\pl.lproj\DevicePrefsPodcasts.nib\objects.xib.
Verify that you have access to that directory
Anybody have any idea what this is about, thanks.
When I cancel out I get a Problem with Shortcut box, Fatal error occurred during installation!

One more question though under Program Files-iTunes, I have multiple iTunes folders, labeled iTunes(2) and iTunes(4). Should I delete these or leave them alone?
I don't think they're any immediate cause for alarm if they're what I think they are ... have you done some system restores on that PC at some stage, Matt? If a system restore is done to a restore point "over the top" of an installation or upgrade of a program, sometimes the system restore will put program files dating back to the previous version back on the PC. By design, it doesn't want to overwirte existing files on the PC, so it renames the top-most folder containing the files it has put back "<Program name> (2)" or "<Program name> (3)" if there's already a "(2)" and so on.
(Because the installation database for the program doesn't realise that there are any such files in folders "<Program name> (2)" etc files on the PC, they generally don't get removed in the course of regular subsequent updates or uninstall/reinstalls of the program and they stay lurking around on the PC ... it's actually precisely the same phenomenon that we just exploited in order to convince the iTunes repair install to go through ...)

OS X remote desktop failure to PC with Windows Server - no error messages

Recently I installed the Microsoft Remote Desktop App on my iPhone 5s and successfully managed to connect to a machine which is running Windows Server. I also frequently connect to it using remote desktop on a PC.
I have since installed the Remote Desktop app onto a Macbook with Yosemite and the exact same settings do not work. When I click start, I get a black screen which says 'Initializing' and then 'Connecting' and then the window simply closes, with absolutely
no error message or warning.
The connection involves specifying a gateway if this is of relevance.
Given connection is possible using the same app on another device, I cannot reconcile the fact that it does not work through a Macbook and it's very frustrating because things I need to do are essentially not worth doing on the iPhone screen.
At the moment, the only thing I can think of is that the app version for iPhones works and the one for actual Mac computers is faulty because I see these are different versions.
Please help or restore my sanity by confirming my suspicions and if it is so, advise when the Mac version will be rectified. Alternatively, if there is an old version which would work, please can you provide a link to where I can install this?
Thanks in anticipation!

Hi,
From your description it seems that your MRD MAC is not working. Can you let us know which version of MRD MAC you are using, please try to use latest version v 8.0.13 and check?
Btw, by which method you are trying to remote connect (via IP address or Hostname). Please try alternate way and see. Also you can find the log on below path for more research on MAC.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Apart for a try, built URI scheme and connect the server to check. You can get information over
here.
And for older version, sorry to say but there is no such option to download.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am having issues with Time Machine. Error message "The backup disk image could not be created.

Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-A

How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A

Complicating issue with CS 5 installation error message

I have installed CS5 (not CC) onto my laptop, as my second install. I am getting the message "One or more files in the Adobe Application Support folder, necessary for running PS, are missing. Please run the PS installer and re-install PS." I know others have had this problem, as well, as I have read many posts in the forum. The problem is that If I uninstall it, I won't be able to reinstall because this is my 2nd install. I'm sure there must be some way to rectify this problem, but I need help from an adobe staff person. Please help!

station_two,
I can't thank you enough for your help! This took care of all of my PS problems. I've been sitting here for two days, trying to get help. I spoke with two people I could barely understand, who sent me on wild goose chases. Another told me the problem couldn't be resolved and that my only choice was to get CS6. Anyway, not to unload on you... but THANK YOU!!

SFTP connection issue with Dreamweaver 2014

I have a very weird SFTP connection issue with Dreamweaver CC (2014). I am on a Mac running 10.9.4 and have no problem connecting to my server through SFTP with Dreamweaver CS 6. However, using the exact same settings on CC (2014), I get the following error: "An FTP error occurred - cannot make connection to host. Your login or password is incorrect. Please check your connection information".
I am truly at a loss here. Command line connection works without problems.
Any thoughts?

Hi there,
Try after rebooting your system or in a different user account on MAC.
Is there any limit with number of login sessions with your SFTP?
Could you check with Filezila or similar FTP client and connect to your site, see if you get any error there?
Thanks.

Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
VM: Windows Server 2012 R2 with installed Active Directory Domain Services
When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

Hello Aleksandr,
There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
a multihomed domain controller.
Active Directory communication fails on multihomed domain controllers
http://support.microsoft.com/kb/272294/
Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
configure a DC with registry mods:
http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
7 Reasons not to Make Hyper-V a Domain Controller
http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
Domain Controller as Hyper-V host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
Networking?
I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
the host OS ping/communicate with the DC virtual machine?
If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
Hyper-V Server VLAN Network Configuration
https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv
Recommendation:
Why not just create another VM DC?
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

"Server Busy" Error in Windows 8.1

Since yesterday, I have been unable to use Dreamweaver due to a "Server Busy" error coming up when I start the program. I have installed the available update through CC and am still etting the error, and all documentation on said error is for earlier versions of Dreamweaver and Windows.
I am unable to use the program and need a resolution to this as quickly as possible. Any help would be appreciated.
Thank you.

I believe I have found the solution. I uninstalled Norton Anti-Virus (after it said to have failed the latest update) and now the error is gone.
Norton came pre-installed on my laptop, yet the two programs had no problem until last week.

Broken link in "Oracle9i Application Server Portal Error Messages"

Hi,
the following link to "Troubleshooting Issues in Oracle9iAS Portal Architecture and Performance"
http://portalstudio.oracle.com/servlet/page_pageid=478&_dad=ops&_schema=OPSTUDIO&
is bad in the document "Oracle9i Application Server Portal Error Messages" which can be found at http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/ERRORMESSAGESHTML/CH_902.HTM
Rgds
Sol

After installing the Oracle9i Application Server ,Oracle8i 1.7 Database,I visit the link"http://localhost" ,then click "Jsever (demo)". Then ,there appears "500 Internal Server err".
The log file:
mod_jserv.log
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: can not connect to host 127.0.0.1:8007
[24/01/2002 09:25:32:031] (EMERGENCY) ajp12: connection fail
[24/01/2002 09:25:32:031] (ERROR) an error returned handling request via protocol "ajpv12"
Please help me.Any help appreciated!

"Server Busy" Error Help

Every time I try to install CS4 Photoshop, though having all the right files, gives me a "Server Busy" error, saying there's another part BUSY, and I have to click "Switch To" to end it, but when I do, it keeps popping up the message. Help please!

HI Debnilay,
Check that Webserver is up and running, in case of windows Check IIS services, restart if necesary, also check ITS services and AICOR and restart if necesary.
Hope this help!
Juan
Please reward points if helpful

HT1222 How do I download itunes with a MSVCR80.dll error message?

How do I download itunes with a MSVCR80.dll error message?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

How can I resolve an issue with Word 2013 incompatibility errors?

My Client is continually having issues with his Office 2013 installation, specially with Word 2013.
After re-installing Office 2013, he gets the following error when trying to run Word.
When he clicks on the Repair now, he gets the following error;
He used the Microsoft uninstall tolll to fully remove Office 2013 before re-installing Office 2013.
His PC is running Windows 8.1
Any help would be appreciated.

Hi,
Do other Office applications occur the same issue?
Based on this error message, I find a similar issue.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/keep-getting-error-were-sorry-but-word-has-run/b9a014db-c4c6-46aa-95b1-679308735f66?page=5
You can follow Mpw1979’s reply, here is detail information.
“When I tried to change the compatibility mode on Winword.exe I found there were no options available so I right clicked and selected Troubleshoot Compatibility.
From here select Troubleshoot Program then tick I Can't See My Problem Listed and then select Windows 8 from the next screen and apply the changes and it worked.
I should also note I had Abbyy finereader installed and the plugin was causing Word to crash so i simply opened in safe mode and disabled the plug-in.”
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Shift+i issue with Dreamweaver CS4

Hi,
i have an issue with Dreamweaver CS4 when I press shift+i the behavior is similar as cmd+v (a paste action). I checked the keyboard shortcut, but no action set for shift+i .. i don't understand.
Please may you help me!?
thanks
bye
Max

Another place you can ask is in the forums for dreamweaver:
http://www.adobe.com/support/forums/

Issue with Dreamweaver - Server Busy error message

Similar Messages

Maybe you are looking for