Issue with embedded website links in emails

Hello all,
First time on this forum and hopefully someone can help me with this issue, which popped up in the last few weeks. Whenever there is a link in the emails that I received, the link is only underlined and highlighted up to about 30 or so characters and when I click on it, it will open another window but the address is only the portion of the link that is highlighted, therefore, it always comes back with an error. I have been getting around this issue but manually highlighting the entire link address in the email and then copy and paste it in a new window to get to the site that I wanted. This is getting annoying and I don't know why it happened suddenly and how to fix it.
Thanks,
Peter Lau

Peterlau,
Im sorry to hear about you link problem. In order for me to resaerch this for you I need some additional information. Please fill out the secure form http://www22.verizon.com/onecms/verizonsupport?ID=peterlau . Make sure to also include an example of a link you were emailed, how you access your email (website, outlook, etc) , as well .
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Issue with Open Enrolment Link in ESS - Benefits

Hi Experts,
We are facing two issues with open Enrolment Link in ESS for benefits, Need your help in resolving this. Please find the details below :
1. Benefits cost is not appearing in open enrolment Screen
Details : Monthly Contribution cost is not appearing against the Benefits Plan for which employees are already enrolled in Open Enrolment Screen, Because of this employees are not able see previous contribution before deciding on contribution amount for next Financial Year.
2. URL for Benefits plan Gets disappeared in Open enrolment Screen
Details : When Contribution is removed for any Benefits Plan the corresponding URL link disappears, But this comes up when the page is refreshed.
Could you please let us know if this is related to missing configuration or Java webdynpro code.
Our Live system is ECC6.0 SP level A4 , Please let me know if you need more details.Looking forward for your response.
Regards,
Shilpa

In regards to your first question, it could be a date issue for the infotype record. If the records for open enrollment are set to be effective for a future date, and the current record is delimited, then you won't see it in the open enrollment screen. This is true for benefits like a flex account because they have to be re-elected every plan year.
Let's say that any elections made in the current open enrollment period you are in take effect June 1, 2014. If the current record has an end date before June 1, then in the enrollment screen the employee will not see the current record because SAP is looking at June 1.
Take a look at the employee's record and at the benefit you want them to see and see what the end date is for the most recent record.

Firefox having issues with embedded media websites

I actually have two issue which maybe the same issue.
1.
Certain sites that I regular navigate to that have some sort of embedded media, the media does not display. As an example on the site http://odb.org/, in the top left corner is a player which displays in Chrome and IE and displayed in Firefox prior to 4.0 but now only displays a white box but no play button or volume control. Other websites with different media types are blank. I have a site with code that displays an embedded interactive speaking character and the portion of the screen is should display remains blank.
2.
Second issue, maybe related is while the Firefox 4.0 appears to be fast. On the same sites with embedded media or with complex pages (probably has stuff I don't know is there), the page attempts to load and you see the waiting for or transferring message in the bottom left corner. It takes a while and then if you attempt to click anywhere on the page you get the "not responding" message but the page eventually loads possible with missing content. Heck I have this problem accessing the Firefox support page.

Nope. Went through that list before and nothing. For kicks, I try it all again. I turned off every add-on but Shockwave and that didn't work either. Also, on the Adobe Flash test page the Flash portion of the screen does not display when I use FireFox but does when I use Chrome, so I couldn't check the whole hardware acceleration setting anyway. I had reboot issues when I was forced to upgrade to Firefox. I am wondering whether my download is somehow corrupt. And if you were wondering, Safe mode didn't work either. When's the next Firefox patch. funny thing is everything worked well in Firefox 3.6 and below, so either the update to 4.0 or the download process broke something.

Issue with embedding and usage of worklist TF in ADF app

In our application, we have embedded the worklist TF from "adflibTasklistTaskflow.jar" in our jspx page. Below is the page def binding for the TF
<taskFlow id="taskListtaskflowdefinition1"
taskFlowId="/WEB-INF/taskList-task-flow-definition.xml#taskList-task-flow-definition"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="federatedMode" value="false"/>
<parameter id="showActionDropdown" value="true"/>
<parameter id="showViewFilter" value="true"/>
<parameter id="showAssignmentFilter" value="true"/>
<parameter id="showStatusFilter" value="true"/>
<parameter id="showSearchControl" value="true"/>
<parameter id="showTaskTabs" value="false"/>
<parameter id="displayColumnsList"
value="title, state, creator, assignedDate"/>
</parameters>
</taskFlow>
Issue
When we try to re-assign the claimed task in the worklist, it opens up a re-assign popup - "Identity browser".
Within Reassign Screen:
- Select "All" value on the dropdown
- Enter a last name on the text field. I.e. "Kristoffersson"
Or enter an email address.
- SOA error will appear as mentioned below
"Search failed with an error. Service error.. Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services"
This issue is not seen for any other option in the drop down other than "All" (e.g. "users", "group", etc. it is displaying all corresponding search results of users from LDAP)
Below are the library which we have added in our UI project:
I. BPM worklist components
1) adflibTasklistTaskflow.jar
2) adflibWorklistComponents.jar
II. BPM Workflow
1) bpm-services.jar
2) bpm-infra.jar
III. BPM taskflow
1) bpm-workflow-datacontrol.jar
IV. BPM services
1) bpm-services.jar
Is there anything missing from the uptake? Please suggest.
Also, is there any uptake document for the same (embedding human worklist into a page)?

Hi,
I remember a similar issue with inner frames that should be fixed in JDeveloper 10.1.3.3. The problem was that the ADF Faces JavaScript did not get the correct document root.
Frank

Having issues with .fdf's linking to the document they were creating from in reader 9.1

I run adobe reader in a citrix enviroment. presentation server 4.0 windows 2003 SP1. We have alot of PDF forms on our file server and what users do is open up one type in the data and then click on submit at the top of the PDF then they email the .fdf that is created either to themselves or someone else on the network (this still functions in 9.1). When using AR7.0 and a user would double click on the .fdf it would automatically put the data in the form it was created from but with 9.1 it doesnt, it opens up explorer and wants you to navigate to the appropiate .PDF to insert the .fdf into. I have 3 citrix servers and I have only upgraded 1 to 9.1 for testing. If the .fdf is created in AR 7.0 it will link to the .pdf if you open the .fdf in either 7.0 or 9.1. But if the .fdf is created using 9.1 it wont link the document in either AR 7.0 or 9.1.
Any suggestions would be greatly apreciated
Thanks

Have you had any luck with this yet we are having the same issue with this it seems to be the first page only on our issue, we are printing 8.5x18 and it just recognizes the document as 8.5x11, works fine from reader 8.x

Issue with viewing website in internet explorer

Hello. I created a website in dreamweaver using rollover images for the links. When I load the webpage in the firefox, google, or opera browsers it loads fine, however when I load it in internet explorer I get an "allow activex" message. When I tried to view it on my tablet in google it loaded fine, but when I tried to load it in my tablet using internet explorer it didn't show any links at all and than it crashed the browser. What can cause this and how can I fix it? is there a better way to create rollover images that I'm not aware of? I tried to use CSS code in the stylesheet to make rollover images, but couldn't figure out how to do that.
Thanks,
Mike Irvan

Any server you have access to would work fine, you just upload to a temporary folder, like TEST, then delete it after the problem is found.
However, if you're not online yet, and having issue with IE, it's very likely you just need to drop IE's security settings to allow it to display local file attachments correctly (yeah, don't ask, it's a Microsoft thing).
Go into IE and choose Tools > Internet Options > Security and drop the scrubber bar down a notch or two, restart and try again.
When the site is uploaded to an actual server, that error won't come up because all files are coming from the same remote source (Microsoft, it doesn't have to make sense®)
You can do a search online to get more info on customizing the settings manually, somehting like this page will come up if you search allow blocked local files: IE 10 is blocking javascript on local html files - Microsoft Community

Issue with bodog website

I have a verizon 8330 curve and my verison is 4.5.0.175. I'm having an issue with https://sports.bodog.com/. I can log in and get all the way to where I click on "Review My Bet." I click the button and it goes nowhere. It acts like I haven't clicked on anything. Could this be a setting? Has anyone else expierenced this

Hi and Welcome to the Forums!
Websites can be coded to perform better with some browsers rather than others. The BB Browser can appear to websites as several different things...that setting is, from within the Browser App, ( > Options > Browser Configuration > Browser Identification). Changing that to another browser might help your BB interact better with some websites. In combination with all of the other configuration settings, you need to find the combination of all of these settings that works best for the sites you are visiting. Sadly, there is no "best advice" to give as each persons needs are different. But, I typically find that changing the Browser Identification often helps -- most often by changing to FF or IE (if those are available to you...the options vary by carrier).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issues with Wikipedia website on Safari

Hi,
I've had a couple issues with using Wikipedia on Safari. The longest one I've been having is when after searching for and/or going to an article page using the search box on the Wikipedia website at the top right. After entering a search and/or going to an article page, if I use the Cmd + [ keys to go back (or Cmd + ←) to the previous page relatively soon afterwards (immediately or say just a couple minutes later), after I release the Cmd and [ keys, the vast majority of the time Safari will behave as if I had pressed Enter in the search box on the previous Wikipedia page, loading the search page for Wikipedia (http://en.wikipedia.org/w/index.php?search=&title=Special%3ASearch). Sometimes it will enter in what I had searched for on that page and then behave as if I'm searching for that page again and enter and return the results of that search again. This replaces any pages from the history navigation beyond that point, which can be annoying some if I have a couple of pages that I had gone to beyond that page. And sometimes, it doesn't do this re-searching, it'll just behave normally like it should and used to and just go back to the previous page, which is all I want it to do. Like I said, the vast majority of the time it doesn't do this.
It only does the "re-search" after I let go of the Cmd key. If I keep holding it down, Safari will do the re-searching thing only once I let go of the Cmd key. If, while still holding down the Cmd key and after I have navigated back to a page where I used the search box recently and then I press another key, such as the Shift, Option, or the other Cmd key (all while still holding down the first Cmd key...) if won't do any of what I'm talking about and behave normally. This happens only on Safari as far as I know. I think this started happening with my (2007 I think...) white MacBook when I upgraded to OS X Mountain Lion and to Safari 6.0, and this problem carried on on my Mid 2012 MacBook Pro, even with any OS or Safari updates.
I'm also unable to play any audio files with the player on Wikipedia pages. I tried downloading the plugins they talk about on their media help page (en.wikipedia.org/wiki/Wikipedia:Media_help_(Ogg)) but nothing has worked so far. When I press to play an audio (Ogg?) file, it'll play no audio and the elapse time will just loop over and over the first :03 seconds, but again with no audio playing.
The most recent one is when I think after the more recent updates for Safari 6.0 in the last couple of months. In Wikipedia, they have numbered reference footnotes, and when you put your mouse cursor over the number it would show a box over the number showing you reference information for that footnote. Usually the reference is a website with a clickable link to the source reference. Even if it's not a website link, it would show the box right above the footnote number showing you the reference information, which was a really neat and useful tool on Wikipedia. Now, if they are footnotes close to the top of the page, they appear basically right above the footnote number, basically like how it should and used to be. But as I move further and further down the page, the footnotes will appear further and further above the footnote number. The article page doesn't have to be that long until the footnote reference starts not even show on the same page. It is so far away, that it is above the webpage view and cannot be seen at all. If there are any links for the footnote, I have to quickly move my mouse cursor over to the little popup reference before it disappears. It disappears automatically as you move your cursor away from the footnote number.
These aren't huge issues I know, just kind of annoying and a little inconvenient to me. I use Wikipedia all the time for general info, so can be a bother to me sometimes. Has anyone else had any similiar issues to these and is there anything I can do about them? Or are these just bugs I'll have to live for now? I'm guessing people will tell me to upgrade to OS X Mavericks. That might hopefully work, but anyone know of issues like these and solving them if it doesn't? Thanks for any help.

The workaround for the moment is to go into about:config and set the html5.enable boolean from true to false.

Issue with normal page link redirecting to SSO page / forbidden page

Hi,
I am having an issue with a number of pages within my portal.
I have a 'List of Objects' that has been working for some time, each link in the list linked to another page.
Just lately a number of pages that are linked to within this list are not loading correctly.
When one of the items is selected, the correct page is initially displayed, but then after a couple of seconds the page is redirected to the 'Single Sign-On' page, or alternatively the page is redirected to a 'Forbidden' page with this error:
Forbidden
You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
(This page will also show up after the user tries to login when the page is redirected to the SSO page).
As well as this issue occuring at the front end, the same issue is happening when the pages are loaded from the back end, in the Navigator.
This issue is even happening when the page is opened up in 'edit' mode using the ORCLADMIN user.
Any help is greatly appreciated!!
Amanda.

Figured it out...

Issues with this website

Is this a Safari issue or a Dice issue, or both?
http://community.dice.com/t5/Customer-Support/Using-Safari-with-this-website/td- p/191198
My post
The font size is WAY WAY too small, and I have had some other issues as well. One of which is when I close the browser window and come back to a thread and hit the reply button, I am taken to some search screen, and have to completely log out and log back in before I can reply. Its very annoying and needs to be done everytime I reply to a post. I have deleted all my cookies, cleared my cache, etc.. I am thinking its a issue with how this website talks with safari but I could be wrong. I could ISOLATE the problem by creating or logging into another Mac account I setup for testing problems, but I am too lazy to do so, as I am thinking this is a Dice + Safari issue because I never had the problems when I used FireFox full time.
John

I bet a donut that the problems I am experiencing have nothing to do with logging in as a admin. I bet its a Dice + Safari issue.

Any known issues with SQL DB Link Synonyms joining on encrypted columns

Are there any known issues with accessing encrypted columns via a database link that is masked by a synonym?
We are experiencing unexpected results when the encrypted column is anti-joined through a not exists, to a local encrypted column of the same datatype The encrypted columns are person ids. If the expected person id is hard coded, the results return correctly. The local database is 10.2.0.4.0 and the link is to a 10.2.0.3.0 RAC.
Both enrollments and person_ids, below, are synonyms to the linked tables.
... From table_1 d
where ...
AND NOT EXISTS (SELECT 1
FROM enrollments x,
person_ids p
WHERE x.person_demo = p.person_demo
AND x.rept_inst = d.rept_inst
AND x.demo_time_frame = d.term_deg_grant
AND p.person_id_encrypted = '999999999')
vs.
... From table_1 d
where ...
AND NOT EXISTS (SELECT 1
FROM enrollments x,
person_ids p
WHERE x.person_demo = p.person_demo
AND x.rept_inst = d.rept_inst
AND x.demo_time_frame = d.term_deg_grant
AND p.person_id_encrypted = d.person_id_encrypted)

milazzo74 wrote:
I am having the same problem...
http://www.milazzo.com.br/teste/projetos.php
It works fine in Firefox but loads forever in explorer 8...
The cause of the problem is not the same.
In your case it takes forever to load the thumbnails from flickr.com; the SpryDataSets without the loading of the thumbnails works as expected.
Remember that ALL of the thumbnails for each 60 odd projects are downloaded from flickr, that is about 1800 thumbnails.
Gramps

When I type in a website link in email, how to automatically make it a hotlink

The website link addresses I type in remain in text form, with no hotlink

There is usually a toolbar button in the editor to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each.
* Make Link - https://addons.mozilla.org/firefox/addon/142

VLAN Spanning-tree (VSTP) issue with Metro-E links

Hi Everyone,
We have Juniper EX 4200 as core switch at two sites connected Cisco 2960s and Cisco 3560s (access layer switches). For even-numbered VLANs, one Juniper switch is root bridge and for odd-numbered VLANs, other Juniper switch is the root bridge.
We have Cox and Verizon Metro-E links connecting core switches (Juniper EX 4200 at both sites).
I want to do VLAN load sharing using VSTP but somehow it is not working as expected. I want to pass some VLANs through COX and some through Verizon. When there is any issue with Cox, all VLAN traffic pass through Verizon and vice-versa. RSTP is also enabled on both Juniper switches.
I see MAC flapping in log messages on all Cisco access layer switches when I bring up both Metro-E links together. When only Cox is connected, everything works fine. When only Verizon is connected, everything works fine. But when BOTH COX and Verizon are connected, network gets disrupt and I see MAC flapping on all Cisco switches. All cisco switches are running PVST.
Anybody knows what is happening and why VSTP is not working when both COX and VERIZON Metro-E links are active ?

Hi Tojackson, I guess this depends on how stuff is interconnecting. It's obvious gi1/1 is forwarding and gi1/2 is blocking. So from the furthest access switch, what path must it take to reach gi1/1? That is the number of hops involved for normal traffic.
Now, if you're concerned about a specific VLAN and you need gi1/2 forwarding to reduce travel time for other traffic, you may employ RPVST to have that specific VLAN and cost to go to gi1/2.
In some part of the network I support we have a pair of Cisco 7606 which feeds in to a 4507R and off the 4507R we have a ring of 2955 with even 10-12 L2 switches on the ring. The consequence of multiple layer 2 hops is not of much concern and our spanning tree stops with the 4507 since we're not concerned about broadcast storm on the routed interfaces on the 7600.
-Tom
Please mark answered for helpful posts

Hello...after upgrading to firefox 6 i'm having issues with some websites and would like to go back to firefox 5. can i do this and if so how? thanks

ever since firefox updated to version six i am having some issues with games on facebook and also loading several sites. i'm getting a lot of time outs. i would like to go back to firefox 5. please advise

Sorry, Swanarva, It didn't work as it was supposed to. I downloaded, saved file, clicked the download to open, clicked 'run' then got an error message that it couldn't find the file(!) . No idea what happened or why. Should I have uninstalled Firefox first, then downloaded Firefox 8 using another browser or downloaded, uninstalled Firefox 09 beta then tried installing Firefox 8?
At this rate, IE is looking good, despite its shortcomings.

Issue with embedded website links in emails

Similar Messages

Maybe you are looking for