Issue with file to file in PI 7.3 (Splitting huge files)

Hi All,
Need your help in fixing the issue with file splitting
We are doing some sample scenarios(file to file) on PI 7.3 server.
We are trying to split a 10MB file by using the 'Advanced Mode' option in the sender file adapter. We gave max split file size as 2MB. The file got split into 5 chunks and was successfully sent to receiver file adapter. In receiver adapter we are able to see that. But in the target folder only 1 file was seen with size 2MB. All other chunks were missing. We need to have the whole data sent from source to target.
How to fix this issue? please provide your inputs.
Thanks and Regards,
Lakshmi Narayana

PI 7.3 has capable of processing larger size files.
Questions:
Have you picked EOIO quality of service? Hope you dont do mapping or content conversion for this file?
have you seen this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a06d79f3-d094-2e10-1a81-f4d802d0bcf1?QuickLink=index&overridelayout=true
http://help.sap.com/saphelp_nw73/helpdata/en/44/682BCD7F2A6D12E10000000A1553F6/frameset.htm

Similar Messages

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

Issues with Mac OS X Server 10.4.8 and Windows File sharing

We are having lots of issues with our SMB share on Mac OS X Server 10.4.8. The main issues are the following:
- Group ACLs seem to not work properly, and I have had to add dozens of manual permissions on a per-user basis
- Often, users open a file in read-only mode, without any reason, and can't modify it
- Often, users open a file with full write access, but then cannot save it and have to use a "save as function".
After having looked all over the Internet and on the Apple's discussions forum, it seems like this issue has been around for quite some time now:
http://discussions.apple.com/search.jspa?forumID=702&threadID=&q=smbANDpermissions&objID=f702&dateRange=thisyear&userID=&numResults=15&rankBy=10001
http://discussions.apple.com/thread.jspa?messageID=1546867&#1546867
http://discussions.apple.com/thread.jspa?messageID=647251
And no real answer/solution has been provided by Apple yet.
I also looked on Samba related pages, and it seems like these issues were Samba related (both ACL/OpenLDAP and Microsoft Office file handling issues), and the current version of Samba (3.0.23c) seem to have solved lots of issues in these areas:
http://us1.samba.org/samba/history/samba-3.0.23c.html
Apple ships Samba 3.0.10 (16 Dec 2004) with 10.4.8, which makes the shipping version at list 15 versions (and 18 months) behind the current Samba release (30 Aug 2006).
People within the company are obviously quite unhappy with the situation and beyond me looking like a fool for migrating from Windows Server to OS X, I now need to find a solution to the issues.
I would like to know what is the official and Apple recommended way to solve this issue.
Kind regards,
Pejvan
It seems like Apple is totally ignoring the issues, users are facing with SMB shares, while their emphasize as a selling point how OS X Server is a great "windows file" server.

Hiya
Thanks for the reply.
>Is there a UPS involved?
I wish there had been. I might not be having to deal with it now! :-)
>If you boot from the Install Disc & use System Profiler there, does the Same RAM situation? Did you physically >check those slots? Thinking maybe the OS is kicking them out on bootup?
I've had the following suggested to me on another forum - "My guess on the RAM error is this. You have a processor that wants the RAM to be dual channeled and since it reads both A slot are populated it wants both B slots to be populated. Remove A2 and put it in B1"
But unless it is degrading performance I'll probably just leave it.
> Still can't get it to boot from the Clone holding the Option/alt key at bootup?
I can get it to boot from the Clone using the option key but it's a pretty random event. I can try for ages and then suddenly it'll work. Or it may work first time. It does seems to work more easily after a PRAM zap. The funny thing is that once it is booted up it will re-start in any way I want it to (the boot volume, the clone, a disk, single user mode etc). It is just hard to boot from a full shutdown.
I'm thinking that if I ca get the start-up issue fixed then I can fix the RAID issue at my leisure and even add the hard-drive that the clone is currently on to the RAID array.
Thanks again.

Issue with the report oracle.apps.xdo.XDOException:Error creating lock file

I am getting an error while submitting the XML publisher report in Betsy N0 instance.
Issue
Log :- Beginning post-processing of request 145458120 on node BETSYN0DB1 at 22-DEC-2011 05:28:26.
Post-processing of request 145458120 failed at 22-DEC-2011 05:28:28 with the error message: One or more post-processing actions failed. Consult the OPP service log for details
Output :- Blank Report
XML file :- XML file generated without any error
Output process:-
[12/23/11 4:28:10 AM] [1213640:RT145480622] Completed post-processing actions for request 145480622.
[12/23/11 5:16:01 AM] [OPPServiceThread1] Post-processing request 145481427.
[12/23/11 5:49:30 AM] [OPPServiceThread1] Post-processing request 145481923.
[12/23/11 5:49:30 AM] [1213640:RT145481923] Executing post-processing actions for request 145481923.
[12/23/11 5:49:30 AM] [1213640:RT145481923] Starting XML Publisher post-processing action.
[12/23/11 5:49:30 AM] [1213640:RT145481923]
Template code: XXWIP_WO_VLVS
Template app: XXWIP
Language: en
Territory: US
Output type: PDF
oracle.apps.xdo.XDOException: Error creating lock file
     at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
     at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
     at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
     at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[12/23/11 5:49:31 AM] [UNEXPECTED] [1213640:RT145481923] oracle.apps.xdo.XDOException: Error creating lock file
     at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
     at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
     at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
     at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[12/23/11 5:49:31 AM] [1213640:RT145481923] Completed post-processing actions for request 145481923.

The issue is fixed.
Our XML Publisher TMP is not defined, so it uses the APPLTMP used by concurrent manager. There is a folder xdofonts/<SID> in $APPLTMP. It contains the fonts used by XML publisher and on the of font file (.ttf) was 0 byte. We copied the ttf file from QA. And it started working.
Best practice is to define diffent TMP for concurrent managers and XML Publisher.
Cherrish Vaidiyan

Issues with running Siebel restart scripts on crontab. No such file error

Hello,
I have Oracle Linux 5.6 and below is the cron entry. Basically executing at 5.30 AM in the morning for all weekdays. The desired function doesnt happen and it rather udpates the mailbox with the "No such file or directory error". The script is running when manually executed though.
==============CRONTAB ENTRY=======================
bash-3.2$
bash-3.2$ crontab -l
30 5 * * 1-5 "sh /u02/sbl/product/sba81/SRF_change_v1.sh >> /u02/sbl/product/sba81/srf_change_log.txt"
You have mail in /var/spool/mail/siebelapp
bash-3.2$
======================================
==============STARTING OF THE SHELL SCRIPT==========
#!/usr/local/bin/sh
. /u02/sbl/.bash_profile
cd /u02/sbl/product/sba81/siebsrvr/
if [ -f "objects/enu/siebel_enu.srf" ] || [ -f "objects/ara/siebel_ara.srf" ]; then
echo "================================"
echo "New SRF is in place. Proceeding with SRF change."
=================================================
Unable to figure out why its reporting that the file is not there and updating the user mailbox with this message. Any help is appreciated.
Thanks.

How does the following work:
$ crontab -e
30 5 * * 1-5 /u02/sbl/product/sba81/SRF_change_v1.sh >> /u02/sbl/product/sba81/srf_change_log.txt
/u02/sbl/product/sba81/SRF_change_v1.sh
#!/bin/bash
#. /u02/sbl/.bash_profile
cd /u02/sbl/product/sba81/siebsrvr
if [ -f "objects/enu/siebel_enu.srf" ] || [ -f "objects/ara/siebel_ara.srf" ]; then
echo "================================"
echo "TEST - New SRF is in place. Proceeding with SRF change."
fi

Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

Anyone have a clue how I can open or convert the Adobe Connect FLV file?

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

SFTP adapter issue with dupliacate files

Hello Guys,
I am working on file to proxy scenario on PI 7.31 Java only system.
I am facing issue with SFTP sender adapter, i wanted to reprocess the same file again. Although i unchecked the duplicate file checkbox.
File is not getting processed and adapter gives below error.
Error while sending message: Message ID 1406196843/-1496048728/1376310205/103581509 already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (UNKNOWN.obj#=24157) violated
OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]
Note- SFTP component is 1.0 and patch level is 01.
Please let me know if anyone have came accros such error and resolution for the same.
Thanks,
Sandip

Hi Sandip,
What is your PI SP level?, check if this note affects your system
1635853 - Concurrency issue during load test
1979353 - Recurring TxRollbackException with MODE_STORE_ON_ERROR stage configuration
Check also this thread File Sender Adapter - Duplicate Message ID Issue - PI 7.31
Regards.

Issues with file locking when reading a file using RollingFile Appender

Hi,
I am facing a file Rotation Issue with log4j. I want a way to read one file from two diff apps.
Intro: App A is writing a file F using log4j rolling file appender and app B is reading the same file F using new BufferedReader(new InputStreamReader(new FileInputStream(_file))).
Issue: App A is not able to roll the file. Because it is having a handle on the same file F.
Please let me know how can I handle this issue.

If you have the file open for reading when log4j tries to rename it, the rename will fail. Solution: don't have the file open for reading.
I want to read the feed of such rolling logs without closing any handle.I gave you a solution to that too.
If I am closing the handle after every read then there will be no way to determine where I left.Nobody suggested that.
Is there any possible solution for this?What part of the solution I have already posted didn't you understand?

HT1338 My fuji x100s has RAW file compatibility issue with OS 10.8.2

My fuji x100s has RAW file compatibility issue with OS 10.8.2, my iphoto11 cannot recognise the file format. Anyone know of this issue too? Appreciate if anyone can offer some helps. Thanks

Correct. The Fuji X-100s is not currently supported by iPhoto or Aperture (or the RAW converter in OS X itself). You can submit feedback via iPhoto and request this.

Adobe 9 issues with forms in Acrobat Reader 7

I've been reading up on this forum as to why the adobe rights are disabled after a user saves their data in Reader. I have been adding form fields in Adobe Standard 9 then save the file, test it in Reader, then Extend the Forms Fill-In for Adobe Reader and save the file with a slightly different name. The only usage rights that are allowed is to Save Form Data. When I test the file in Reader 7, I can save the data but when I go into the document to make sure my data is there, I get that dreaded and popular message "Adobe Rights have changed and are no longer valid dialog box...
I never changed the original extended file to cause this..even when I don't add data but save to a new file anyway I lose the writable functionality.
A side note, I do not use LiveCycle and have been asked not to when creating these forms.
I did not have any problems with the forms that I had other people create and extend in Adobe Pro 8. It seems to be a Standard 9 and Pro 9 problem. Or, it could very well be me!
I use Reader 7 to test because these forms are for a volunteer organization and there are users on some early versions of Reader. II do not use earlier versions of Reader. This doesn't seem to be an issue in Reader 9. I cannot vouch for Reader 8.
I just had one of my form writers take my form that was done in Standard 9 and Extend Forms Fill-In via Adobe Pro 8. She initally received a message stating that the file appears to use a new format and it may not open or display correctly. I then got that same message when opening the extended version of the file. The document rights on the new form allow me to add comments and markup, a digital signature and save form data. Once I fill out the fields and try to save, also get another dialog box telling me that I need Adobe Standard or Professional to save (in this case it was 7 since I'm testing in Reader 7).
The forms that I am creating are initally PDFed by another party. The orignal forms are created in QuarkXpress 4.1 and PDFed using Acrobat Distiller 4.0 for Macintosh. I retrieve the files from a web site and save them to my hard drive to work on them. They are shared via email.
Any help would be greatly appreciated. I've spent the last week researching but no anwers to help me solve this particular issue with 9.

Interesting. I did just do the Reduce File Size and extended the document and there were no dialog boxes when I saved my data. The file size got larger instead of smaller and I received the message at the end of the Reduce File Size cycle that said " Enforcement of compatability to an earlier version of Acrobat has increased the size of some images". There is an image in the file, not one that I added, but from the original document. No change to the image either. No biggie to me. As long as my users can fill out the form and come back to it later to make changes, I'm happy!
Thank you. I think that solved it!

SATA Disks Issues with OEL 5.8 uek 64Bit

Hi Oracle Linux Experts/Tech Gurus!,
We are facing lot of issues with SATA disks at both Internal and External,
if we use any SATA USB External Disk it make server hang and sometimes restart
We face this issues with external SATA ARRAY connected at DS-3400
1. Files under this SATA disk partition is gone.
2. Disk free space not release after deleted files
3. Server got hang and restarted many times
4. Disk IO Performance is very slow
(hdparm -t result 70MB/secs earlier it was 130MB/secs with RHEL32)
This issues we are facing with this SATA disk array on SAN DS-3400 connected via QLA2460 Qlogic 4G Fiber HBA Card.
We are not faced any issues before with RHEL32Bit OS on this same HW Setup, once we changed to OEL5.8 64
Please help us to fix this issue with SATA Disks on this OEL 5.8.
Thanks & Regards,
Prabhakar.D
Edited by: dpprabhuindia on May 14, 2013 7:08 PM

And here is the output of scli -i (SANSurfer cli tool)
~]# scli -i
Host Name : xxxxxxxx
HBA Instance : 0
HBA Model : QLA2460
HBA Description : QLA2460 PCI-X 2.0 to 4Gb FC Single Channel
HBA ID : 0-QLA2460
HBA Alias :
HBA Port : 1
Port Alias :
Node Name : 20-00-00-E0-8B-8B-25-F8
Port Name : 21-00-00-E0-8B-8B-25-F8
Port ID : 61-09-13
Serial Number : GFC0640H84421
Driver Version : 8.03.07.08.32.1-k
BIOS Version : 1.12
Driver Firmware Version : 5.03.13 (496)
Flash BIOS Version : 1.12
Flash FCode Version : 1.16
Flash EFI Version : 1.04
Flash Firmware Version : 4.00.18
Actual Connection Mode : Point to Point
Actual Data Rate : 4 Gbps
PortType (Topology) : NPort
Target Count : 1
PCI Bus Number : 6
PCI Device Number : 1
HBA Status : Online
Host Name : xxxxxxxxxxxxx
HBA Instance : 1
HBA Model : QLA2460
HBA Description : QLA2460 PCI-X 2.0 to 4Gb FC Single Channel
HBA ID : 1-QLA2460
HBA Alias :
HBA Port : 1
Port Alias :
Node Name : 20-00-00-E0-8B-92-FB-B6
Port Name : 21-00-00-E0-8B-92-FB-B6
Port ID : 61-0B-13
Serial Number : RFC0641M26491
Driver Version : 8.03.07.08.32.1-k
BIOS Version : 1.12
Driver Firmware Version : 5.03.13 (496)
Flash BIOS Version : 1.12
Flash FCode Version : 1.16
Flash EFI Version : 1.04
Flash Firmware Version : 4.00.18
Actual Connection Mode : Point to Point
Actual Data Rate : 4 Gbps
PortType (Topology) : NPort
Target Count : 1
PCI Bus Number : 10
PCI Device Number : 1
HBA Status : Online
Please advice how to upgrade firmware for this HBA Card
Edited by: dpprabhuindia on May 14, 2013 7:14 PM

Issues with Adobe Reader with Windows 7

I'm having big issues with Adobe Reader. It won't open/display PDF files and closes on it's own!

Not sure if it can help you but I believe you have NVIDIA driver on your machine. Which version it is?
Many tumes issue is seen with NVidia drivers on the machine. Not only Reader but other major apps also crash due to issues in this module.
Please update the NVIDIA graphics card drivers. More information is provided in the below links
http://windows.microsoft.com/en-us/windows/update-driver-hardware-isnt-working-properly#up date-driver-hardware-isnt-working-properly=windows-7
Please let us know if you still face this issue.

Oracle Weblogic Server 12c, issue with deploying the war created from Wavemaker tool

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Hi
Recently, I am facing an issue with Oracle Web logic Server 12c, on deploying the war file (created from Wavemaker tool) to running Web logic server, it shows deployment health status is OK and web application is Active. But when I visit the home page of the application, it is unable to load the javascript files in the context and I am getting below error. Please you can check these errors in the Inspect window of the browser :
Here are the errors on hitting index page after deploying the war file to Web Logic.
http://localhost:7001/TestWarProject
http://localhost:7001/TestWarProject/lib/runtimeLoader.js 404 (Not Found) index.html:39
http://localhost:7001/TestWarProject/config.js 404 (Not Found) index.html
Uncaught ReferenceError: wm is not defined project.a.js:1
(anonymous function) project.a.js:1
Uncaught ReferenceError: wm is not defined index.html:89
(anonymous function) index.html:89
But when I exploded the war file and copy the whole application in the auto deploy folder and restart the server, it is working fine.
Can you please what is the issue not setting context path properly on deploying the war on the fly?
Has anyone found any appropriate solution or workaround? Can you please share?
Thanks in advance for helping me out.
~pcg

Use of AUTOMATIC SCENE DETECTION on already existing huge file

Hello to all for the first time,
I have 6 HUGE already imported video files of my videos diary from Himalaya, so they are each 1 hour long files now and to edit the story I need to brake each of those HUGE imported files into individual clips!!!
Of course I can make new smaller clips manualy but my TIME SAVING question here is how can I make iMovieHD AUTOMATIC SCENE DETECTION work on already imported huge file? So that I just play the HUGE file and it automatically brakes the individual clips and makes different files/clips.
Got it?
Hope somebody into the know will read this.
Thank you
Vladan
G 4 titanium Mac OS X (10.4.9) love it

Thank you Sue,
Thank you for wellcome, great you want to help.
So I imported all my video (from Hi8 - remember) trough firewire in using iMovieHD ... and that is how I got here where I have those huge documents, each 20 Gigs, on my external drive.
so thats where I am at and I would like to RETROACTIVLY (I quess) use that automatic scene detection and out of one huge file (clip) get say 15 smaller clips.
Is that clearer
thanks again
Vladan
G 4 titanium Mac OS X (10.4.9) love it

"disconnect split stereo files" not working

I'm trying to split a stereo audio file into two mono files (manual page 855):
Disconnecting Split Stereo Files
Both sides of a split stereo file are normally edited together. On
occasion, however, you may need to edit one side individually.
To disconnect a split stereo file:
1 Select (either side of) the split stereo file in the Audio Bin.
2 Choose Edit > Disconnect Selected Split Stereo File.
You can now edit both sides of the recording as individual mono files. This function will
only disconnect one split stereo file at a time.
When I select the stereo file in the Audio Bin and choose "disconnect selected split stereo file", the following pops up:
"please select exactly the split stereo audio file you want to disconnect"
I thought I was?
I see the two interconnected circles signifying a stereo file. I choose that file and follow the instructions above but I cannot split the file.

I think I misunderstood. You don't have a split stereo file, you want to split an interleaved file. I see no split stereo files (suffix .L and .R) in your screenshot, so...
From the local Audio Bin menu, choose *Copy/Convert File(s)*
In the conversion dialog, set *Stereo Conversion* to *Interleaved to Split*. Check the *Add to Audio Bin* option. Now two files, suffixed .L and .R, will appear in the audio bin. These are split stereo files.
regards, Erik.
Oh, and this is how to post screenshots:
The pic needs to be online
Once you've uploaded it, go to where it is uploaded, right- or ctrl-click on the picture and choose *Copy Link Location*. Go to your post and add the following syntax to it:
{IMG src="pastecopiedImageLocation"}
You must substitute < and > for the {}braces shown above, and +the quotation marks are essential+.
Use the Preview tab (right above the five format buttons) when writing a post to check if the screenshot shows up in your post, before actually posting it.
(© iSchwartz)

Issue with file to file in PI 7.3 (Splitting huge files)

Similar Messages

Maybe you are looking for