Issue with Information Broadcasting...urgent

I try to dispatch a query through Information Broadcasting with the Distribution type chosen as "send as e-mail" and output format as HTML.
I am receiving the mail with three attachments,
1.0QUERY_TEMPLATE_BROADCASTING_00001.htm.HTM
2.BWReports_ie5.css.CSS
3.pixel.gif.GIF
Upon saving all the files in a folder and opening the HTML,it appears without the stylesheet properties and the images.
My requirement is I need to get the report embedded in my mail.Any clue how to acheive this and should I change any settings.Also any idea as to why the images are not displayed in the HTML.Any kind of help will be appreciated as it is very urgent.
Thanks,
Akhila.

In the Broadcast setting, output format select <b>Independent HTML file</b> and you will receive only one file.
I guess your current setting is set to <b>HTML with seperate MIME</b> files.

Similar Messages

  • Issue with Information broadcasting and pre-cal server in SAP BI

    Hi Experts,
    I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
    I have 20 employees every month I need to send workbook via e-mail from information broadcasting.  The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
    because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
    I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
    like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
    Below log In pulled from pre-cal server
    Can you please tell what could be the problem.
    Successful job
    3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
    3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
    3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
    3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in  thread 3
    3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
    3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
    IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:44 AM (0) -> Excel based operations  finished.
    Failure job
    3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
    3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    .xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
    3/10/2011 10:23:44 AM (1) -> PID of Excel process:  "2544"
    3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
    3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
    3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
    BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
    3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    Thanks in advance
    Narendra

    Hi Ravikanth,
    Thank you very much for the reply
    I went into RSPRECADMIN and clicked on 'Display Current Queue'.  There we have 3 sections
    1) Queue Overview of Open Precalculations
    I can see this section is always blank after running IB also
    2) Queue Overview of Current Precalculations
    In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
    If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
    Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
    3) Queue Overview of Proccessed Error-Free Precalculations
    All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
    I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
    Can you please help me further to trace the error.
    Thank you
    Narendra

  • Mail not coming with information broadcasting scheduling

    dear all,
    when i execute directly the setting for information broadcasting a mail is being sent but when i schedule the same setting in transaction SOST it is showing warning 'waiting for communication service'.how to remove that.
    ajay

    Hi
    first of all, Information broadcasting
    is structured according the requirements
    of users so that
    you are provided with role-specific guides to support you in performing tasks
    following links will help
    monitoring e-mails:
    http://help.sap.com/saphelp_nw04/helpdata/en/44/5b2341144ba52fe10000000a155106/content.htm
    about creating and maintaining master records:
    http://help.sap.com/saphelp_nw04/helpdata/en/52/671191439b11d1896f0000e8322d00/frameset.htm
    additional information on security:
    http://help.sap.com/saphelp_nw04/helpdata/en/4d/75e1951aa4a646ad383ee0c94651f3/frameset.htm
    basic user guide:
    http://help.sap.com/saphelp_nw04/helpdata/en/7b/7998403de08368e10000000a1550b0/content.htm
    kindly reward if its useful
    Regards,
    Naveen P

  • Pecalculation with Information Broadcasting

    hi,
      I am try to set up this scenario but somewhere i am missing some setting. I need your suggestions.
      I have one query on multiprovider which includes 8 cubes. The query takes half an hour to display the results. So, what i have done is i have done the precalculation of the query for specific selection and executed it. And after that i want to send an email to the users through Information Broadcasting with the link so that when they click on the link they could get the results within a minute along with navigations or drill downs.
      I know that this broadcasting can be executed via process chains using trigger event data chain. But i am looking for some help on this.
    I would like to set up my report like this:
    1) After data is loaded into Cubes, the process chain should kick the job.
    2) After process chain kicks the job, the precalculation of the web template should run.
    3) After the precalculation is completed an email should be sent to the users via broadcasting with a link of latest data.
    Over all, after the data loading finishes, the precalculation should start and after precalculation finishes, email process should kick. ...
    How can i acheive this? If there is any wrong sequence above also, please correct me and advise how should i set this up. I could manually do this each step but i want to automate this after every data load. Please advise.
    Thanks in advance...

    Hi,
    You can achieve thru information broadcasting.
    Steps :
    1. Create a process chain.
             Start - Trigger Event data change .
             In the trigger Event data change ,you can specify the infoprovider name which you want to precalculate the query for the infoprovider.
    2. In the information broadcaster , you will find the option as
                  ' Execution with Data change in the infoprovider'.
                         Mark the check box for the infoprovider.
                 Once the infocube data gets loaded or changed , the process chain will kick off the trigger Event data change..Then it will precalculate the query  and send a mail to the users.
               Only thing is you have to start the process chain , once you  know the timing when infocube get load finsihed  , then you can specify the timing in the start variant of the process chain..
    I hope you get my answer.
    Regards,
    Siva.

  • Information Broadcasting(urgent)

    Dear Folks,
    Here requirement is need to send query alerts using information broadcasting.
    In the Braodcast settings Distribution type is showing only "<b>BroadCast Email</b>", no other options are showing..
    I want to select "<b>Broadcast according to exception</b>" in Distribution type,but its not showing..
    how will get the above option..is there any setting required...
    its urgent please reply as early as possible..
    Regards,
    Sudhir

    Hi,
    Thanks for quick response..
    As you said in Distribution type  only Broadcast Email is showing in drop down its not showing any other option like "Distribute accoriding to exceptions"
    For showing these options..is there any authorizations required..
    Here I am explaining you how I started Broadcast settings..
    1.Open Query using URL( this URL got it from SCIF transaction)
    2.There it is showing Information Broadcasting option(Push button)
    3. in query settngs I selected particular query to broadcast..
    4.then I selected Create new setting..
    In distribution type its only showing Broadcast Email..its not showing desired one..
    Its urgent..please shed on lights in this query..
    Regards,
    Sudhir

  • How to intergrate Outlook addressbook with information broadcasting

    Hi All,
    I have been able to send mail to my outlook thro information broadcasting. I would like to integrate outlook address book in broadcasting. ie. when a user is trying to send mail, he would like to get all mail address from his outlook in portal.
    How can we do this? Any help would be appreciated.
    Thanks,
    - Parin Gandhi.

    Hi,
    With the distribution type Precalculated Value Set it is possible to fill variables of the type precalculated value sets with values for characteristic values in the background. The precalculated value sets are then available as variable values in BEx queries.
    The precalculated value set displays the value of a variable of type Precalculated Value Set from the selected characteristic.
    As a result of background processing, you can use the precalculated value set in a characteristic variable. You create a characteristic value variable in the Query Designer using the variable editor. Under Details you determine that the variable represents a precalculated value set. The value of this variable is the technical name of the value set specified in the broadcast setting. You enter the technical name in the Default Values tab page. The variable can be input ready and you can select different value sets in the variable screen at query runtime.
    Hope it helps...
    Regards,
    Mona

  • Incompatibilities with information broadcasting

    Does anyone know if there are any incompatibilities between the versions of BW and Portal for information broadcasting? Are there any features that don't work if you don't have specific versions of BW and the Portal?
    Thanks,
    Tamara

    Note:  In order to use IB to publish results to the Portal, you must have KM (Knowledge Management) installed as a portal component.  Without KM, you can only use IB to publish query results via email.
    For more info, see the online help docs at http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm

  • Pricing issue with Product hierarchy - Urgent

    Hello,
    I have an issue on pricing determination with product hierarchy.
    I created product hierarchy as following,
    level1 - A0001
    level2 - A0001B0001
    level3 - A0001B0001C0001
    Then, assigned A0001B0001C0001 to material D in material master.
    I created condition record with A0001B0001C0001(level 3),  the system found the condition sucessfully when I created a sales order with material D.
    However, I created condition record with A0001(level1) but the system didn't get the price when I created the sales order with material D.  Since A0001B0001C0001 belongs to A0001, the system is supposed to get the price from the condition record with A0001... 
    Could you please let me know how to fix it?

    Hi,
    Thanks a lot for your kind explanation.
    Here is the access sequence I defined.  I wonder if there is anyway I can define PRODH1, PRODH2, PRODH3 in access sequnce the same way with customer hierarchy so that the system can check higher level data.  If it's not allowed, I think I should define routine in requirement as you advised.  Thanks!
    *Accesses
    AcNo       Description
      1           Customer Hierarchy/Product Hiearchy
      2           Customer Hierarchy/Product Hiearchy
      3           Customer Hierarchy/Product Hiearchy
      4           Customer Hierarchy/Product Hiearchy
    Fields
      AcNo   Condition    Doc. field      field lable
         1      HIENR      HIEBO01     CustomerHierarchy 01
                 PRODH     PRODH       Product hierarchy
         2.     HIENR      HIEBO02     CustomerHierarchy 02
                 PRODH     PRODH       Product hierarchy
         3      HIENR      HIEBO03     CustomerHierarchy 03
                 PRODH     PRODH       Product hierarchy
         4       HIENR      HIEBO04     CustomerHierarchy 04
                 PRODH     PRODH       Product hierarchy
    I wonder if I can assign product hierachy fields, PRODH1, PRODH2, PRODH3 to access sequence like customer hierarchy so that the system can check higher level data to get the price...

  • Issue with Script its urgent

    Hi,
    Any one please let me know how we can defne new-page with particular page name.
    for example i want to display the newpage 
    All terms & conditions in last page its layout is different.
    if iam using CONTROL_FORM function module its not taking LAstpage as new page
    please let me know urgently.
    thanks & regards...
    Anil.T

    Hi
    The first thing you have to consider is the NEW-PAGE statament can be done in the MAIN only.
    In the SAPSCRIPT you can insert the line:
    /: NEW-PAGE <PAGE NAME>
    so try to transfer the same command to fm CONTROL_FORM
    Max

  • My dynamic form - issue with saving data (urgent-i would greatly appreciate any help)

    Hello,
    I have some problems with this dynamic form (created in livecycle)  http://www.pathology.ubc.ca/Academic_Activity_Data_Form_Jan_4_2013.pdf .  It doesn't save data unless I add a' new row' to any of these tables.   There are a few text fileds and if I type anything in there data won't be saved unless I trigger it by adding randomly a table row.  This is big problem as this form will be used for updates and if I want to change any of my entered records I will always have to remember to 'add a new row' otherwise just adding/changing text won't be saved. This might sound confusing but you will understanding what is going on if you type in your name and save the form and then type in your name, add a table row and save the form (first case won't be saved second will).
    I would greatly appreciate any help.
    Debbie

    Hi Marco Russo ,
    = CALCULATE (
        SUM ( [measure] ),
        PARALLELPERIOD (
            SAMEPERIODLASTYEAR ( DateTime[DateKey] ),
            0,
            QUARTER
    I have used the above DAX function it is working fine and i have applied same for Year , Quarter and Month 
    But when i remove month filters (Slicer) and Year filters in Power view report
     it is showing total Year values for Year and Quarter values
    for Quarter etc..
    Like below i am getting 
    Last Yr Month Amt   Current Yr Month Amt   Last Yr Qtr Amt   Current Yr Qtr  Amt    Last Yr     Current Yr
     10000                     30000                              10000                30000
                        30000       30000
    but i need Blanks in report if i am not selecting any filters
    thanks,
    Sreeni

  • Issue with the Structure urgent please.

    Hi guys,
    Hope every one doing great...
    I am creating a report in that v r having month/year char on this v have created a variable of type user entry.
    I had created the structure with many selection for the current year along with this my requirement is to restrict the data in the structure for the prior year as one of the selection.
    suppose the user enter the value in the variable = 05.2008
    then i need to restrict the data for the prior year= 05.2007.
    thanks in advance
    KK

    Hello KK,
                   Create a customer exit variable on 0calmonth characteristic , it must be with single option.
    here just for example i have given your new variable as test1 and the user entry variable as var1.
    then check the following code if it works.
    data: year1(4) type n,
          mon1(2) type n,
          mon2(6) type n.   
    when 'test1'.
        if i_step = 2. "after the popup
          loop at i_t_var_range into loc_var_range
          where vnam = 'var1'.
           clear l_s_range.      
            year1 = loc_var_range-low(4).
            mon1 = loc_var_range-low+4(2).
            year1 = year1 - 1.
            concatenate year1 mon1 into mon2.
            endif.  
            l_s_range-low = mon2.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            append l_s_range to e_t_range.
            exit.
          endloop.
        endif.
    hope it helps,
    regards,
    karthik.

  • Oracle Reports(Character Mode) issue with 17 CPI ---URGENT

    Hi,
    I am in-process of Character Mode report development for Purchase order. Report is working perfectly with Font Courier and 10CPI. Now Client wants report with 17 CPI; when I changed the setup at printer level to 17CPI; my report content got shrink-ed to 50%. I tried to change the main section width in report builder from 80 to 102 and stretch the fields but no effects to output.
    Please suggest me the correct approach to get output as per pre-printed stationary in 17 CPI.
    Regards,
    Shishir

    when I changed the setup at printer level to 17CPI; my report content got shrink-ed to 50%. I tried to change the main section width in report builder from 80 to 102 and stretch the fields but no effects to output. What are the steps you followed to change this setup?
    Did you modify the initialization string in the printer driver as mentioned in these docs? Did you bounce the CM after doing the necessary changes?
    Oracle Applications Character Printing [ID 112172.1]
    Building a Printer Initialization String for Oracle Applications [ID 152285.1]
    Pasta Overview [ID 420019.1]
    Thanks,
    Hussein

  • Performance Issue with the Query urgent

    is there any way to get the data for the material Rejected with Movement type 122 & 123 except MSEG table, as my report is very slow...
    my query is as below : -
    SELECT SUM( a~dmbtr )INTO value1
        FROM mseg AS a INNER JOIN mkpf AS b
             ON amblnr = bmblnr
            AND amjahr = bmjahr
          WHERE a~lifnr = p_lifnr
            AND a~bwart IN ('122')
            AND b~budat IN s_budat
          GROUP BY lifnr.
      ENDSELECT.
    abhishek suppal

    Hi Abhi,
    Try like this ....
    SELECT SUM( a~dmbtr )INTO value1
    FROM mseg AS a INNER JOIN mkpf AS b
    ON amblnr = bmblnr
    AND amjahr = bmjahr
    WHERE a~lifnr = p_lifnr
    AND a~bwart IN ('122'<b>,'123'</b>)
    AND b~budat IN s_budat
    GROUP BY lifnr.
    ENDSELECT.
    or ...
    define ranges...like
    ranges: r_bwart for XXXX-bwart.
    r_bwart-sign = 'I'.
    r_bwart-option = 'EQ'.
    r_bwart-low = 122.
    append r_bwart.
    r_bwart-low = 123.
    append r_bwart.
    now...
    in select statement u just add
    AND a~bwart IN r_bwart
    Thanks
    Eswar

  • Issue with Workbook Broadcasting

    Hi Guys,
    I am trying to broadcast one workbook.
    I am able to send it through mail.
    But when I am opening the mail attachment the workbook is not showing any value,only the message
    "There are variables,change variable values" is coming.We are on support pack 18 BI7.
    Please help me on this.
    Sunita

    Hi Sunita,
    Since you say you are on SP 18 for 7.0 this error should normally not occur any more, can you check
    that the manual parts of following notes have been implemented complety in your system:
    Notes 1074272, 1072913 and 1082617
    If the problem still exists please make sure that you have the latest patch for the BI FrontEnd & Precalculation Server
    installed on your system.
    Best Regards,
    Des

  • Issues with .profile file(urgent

    Hi Techies,
    I've Solaris 10 running in v

    John.Kotches wrote:
    Darren:
    If the executable is calling external dependencies (/lib/libc.so.1, /lib/ld.so.1) it is no longer statically linked and shouldn't be in /sbin. Historically, /sbin is for statically linked binaries and shouldn't require anything else to run successfully.Not strictly true on Solaris. Even on Solaris 8 (and further back as well, but I still have a Solaris 8 machine running), dynamically linked tools were present.
    sol8# file /sbin/* |  sed -e 's/^.*script.*$/script/' -e 's/^.* \([a-z]*ic\).*$/\1/' | sort | uniq -c
      12 dynamic
      10 script
       9 staticIn addition to those "system" binaries, there were a few normal tools (like mv) that could be installed in /usr/sbin/static. With Solaris 10 and no more static system libraries, they are gone as well.
    Unfortunately, I can't experiment with a machine right now to move out these two so's to see if /bin/sh will still run; but I doubt it given the truss output I was looking at.No, it won't. /lib is required for system boot.
    I suppose that we could then get into an extended discussion about whether historical convention is worth preserving at some point :-)
    If /lib is hacked and the shell isn't statically linked -- okay I'm not opening that door right now!You're a few years too late... They're not going back to static binaries.
    Darren

Maybe you are looking for

  • USB mouse single click results in a double-click

    Been using a basic USB Dell mouse with my Macbook Pro for a long time.  Suddenly I'm finding that a left click is resulting in a double click some of the time, but not always.  It's system wide regardless of application. Thoughts?  Thank you!

  • Wl-proxy reports: WRITE_ERROR

    When running WLS 6.1 sp2 plugin for IPlanet 6.0, in error log file we see a lot of errors like this: [10/Jul/2002:21:14:12] failure (17778): for host 203.24.100.131 trying to GET /home.jsp, wl-proxy reports: exception occurred for backend host '10.32

  • Fail to create SQL query report because of ORA-00923

    Hi expert, I would like to SQL query report using the following query: select min(identified_date) first_identified, max(actual_COMPLETE) last_closed, count(id) total_issues, sum(decode(status,'Open',1,0)) open_issues, sum(decode(status,'Pending',1,0

  • Flip4Mac (WMV Files? --- iMovie?)

    I know Flip4Mac allows WMV files to play in quicktime, but can you export them into iMovie as another file type? How can I take a WMV movie and edit it using iMovie? or Is it not possible? (Remember I'm new at this....) -Thanks

  • Dial by Extension from the Response Group

    Hello, We do not have extensions. Every user has its own DID number. Internally we use 5 digits dialing. Digits are the last numbers of our DID numbers. Each user has configured Enterprise Voice with LineURI tel:+15555555555. We want to add option to