Issue with MDX report in BI 4.1,SP2

Hello Experts,
We have quite a few MDX universe Bex query based reports functioning well in BI 4.0,SP2 environment. When i moved these reports to BI 4.0,SP5,Patch6 environment, they work fine. But when these reports are moved to a BI 4.1,SP2 environment, they show #UNAVAILABLE error for all the reports.
Screenshot from BI 4.0 SP2 environment:
Screenshot from BI 4.0 SP5,Patch 6 environment.
Screenshot from BI 4.1 Sp2 environment:
I'm assuming it is related to Webi Calculation server changes in BI 4.1 and something to do with change in Database delegation in BI 4.1.
Could you guys assist with the exact issue and the resolutions possible?
Thanks and regards,
Abhishek

Hello Farzana,
I'm the BOBJ basis/admin as well as the developer and not sure what Basis changes you're talking about here. So can you please elaborate on which database to look into and analyze? Is it the bex query or CMS/Audit database or which one?Because when i use BICS connections i dont get these errors, i get some other errors which SAP has already commnunicated to be Bugs in 4.1,SP2. The same works when i change the universe measure to Sum or avg. and not keep as database delegated.
Can you please let me know the exact steps and in detail that you took to resolve this? FYI. Here are is another bugs in 4.1,SP2.
1. BICS #OUTOFRANGE ISSUE:  OSS 547176.
2.#UNAVAILABLE Issue: OSS 1960238
Thanks and regards,
Abhishek

Similar Messages

  • Performance Issue with VL06O report

    Hi,
    We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
    Thanks,
    Surya

    Sreedhar,
    Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
    select vbeln lifnr from vbpa
         appending corresponding fields of table lt_select
         where     vbeln in ct_vbeln
         and     posnr eq posnr_initial
         and     parvw eq 'SP'
         and     lifnr in it_spdnr.
    I don't see any issue with this query. I give more info later

  • Error creating custom reports. Permissions issue with custom reports

    I am having permission issues with reports. I am building a new Configuration Manager  2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
    I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
    Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
    I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
    When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
    I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
    Error: 229)”
    I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
    My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
    Question:
    Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
    Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
    What is the correct process for creating custom reports?

    I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
    That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
    it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
    Can anyone confirm that what i did is correct?

  • Variable input values issue with Portal reports in WAD

    Hi Gurus,
    We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But  the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
    ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
    Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
    Regards,
    Yada

    Hi Hari,
    Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
    Regards,
    Yada

  • Issues with BEx Reports in SAP Enterprise Portal

    Hello Experts,
    I am facing issues with BEx reports integrated in portal. Below are more details:
    Scenario 1:
    Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
    When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
    The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
    The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
    Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
    Scenario 2:
    Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
    Helpful pointers appreciated.
    Thanks
    Vikash

    HI Suman,
    I am not adding the report to favourite using browser favourite. Below is the flow:
    Run the report in portal.
    There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs  for saving the report.:
    Favourite
    BEx Portfolio
    My Portfolio
    save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
    BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
    If I press send for unsaved report, then BEx broadcaster Wizard is shown.
    Thanks,
    Vikash

  • User issue with a report supply planning area today monthly

    this is a support issue....the user has an issue with a report supply planning area today monthly.  The user is getting wrong values in BW, it sums PLOs and POs under production (config).  for eg:  BW says we are producing 46T while in R/3 we have 4T.

    The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

  • Issue with Scheduled Reports

    Having an issue with running reports.  We have created the folder under C:\Program Files\Cisco CRS Historical Reports\reports ..to resolve a bug but now the user gets the attached error message every morning.  Any ideas?
    Thanks,
    Joe

    Hi Joe
    No attachment?
    Aaron

  • BW hierarchies issue with BOBJ Reporting tools

    Hi All,
    Brief about the requirement:
    Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
    Initial Road map planned for implementation was
    o     to use Crystal for operational and formatted reporting
    o     to use WebI for Ad hoc and interactive reporting
    o     to use Xcelsius for Dashboards
    Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
    What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
    And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
    Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
    Thanks & Regards,
    Bala

    Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
    XI 4.x supposedly resolves mots issues but here again details are not known.
    I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

  • Performance Issues with crystal reports 11 - Critical

    Post Author: DJ Gaba
    CA Forum: Exporting
    I have migrated from crystal reports version 8 to version 11.
    I am experiencing some performance issues with reports when displayed in version 11
    Reports that was taking 2 seconds in version 8 is now taking 4-5 seconds in versino 11
    I am using vb6 to export my report file into pdf
    Thanks 

    Post Author: synapsevampire
    CA Forum: Exporting
    Pleae don't multiple forums on the site with the same question.
    I responded to your other post.
    -k

  • Performance issue with HRALXSYNC report..

    HI,
    I'm facing performance issue with the HRALXSYNC report. As this is Standard report, Can any body suggest me how to optimize the standard report..
    Thanks in advance.
    Saleem Javed
    Moderator message: Please Read before Posting in the Performance and Tuning Forum, also look for existing SAP notes and/or send a support message to SAP.
    Edited by: Thomas Zloch on Aug 23, 2011 4:17 PM

    Sreedhar,
    Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
    select vbeln lifnr from vbpa
         appending corresponding fields of table lt_select
         where     vbeln in ct_vbeln
         and     posnr eq posnr_initial
         and     parvw eq 'SP'
         and     lifnr in it_spdnr.
    I don't see any issue with this query. I give more info later

  • Issue with Bex report - key Figures not populating correctly.

    Hi Experts,
    I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
    When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
    Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
    Thanks,
    Anamika
    Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

    Hi,
    The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
    Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
    Please guide accordingly.
    Many thanks,
    Anamika

  • Issue with Crystal Report based on 2 different data sources

    Hi there,
    I am having a frustrating problem with a report I've designed and I'm hoping someone might be able to assist please.
    The report has 3 different prompts, each of which is based on a dynamic list of values retrieved via views within a SQL server db.
    We are wanting to introduce the use of Universes as much as possible, so the data returned is based off a BO Universe data source query.
    I have uploaded the report into BO and have provided the necessary database logon information for the report (in the "Process" > "Database" settings in the CMC) for both the direct db datasource connection (for the views) and the BO Universe query connection.
    When the report is run however, the report still prompts for the database user name & password credentials. I have triple checked my db connection settings, and also have "Use same database logon as when report is run" set to true. I also tested a cut-down version of the report without the Universe connection with the same db logon credentials I provided and there was no credentials prompt when it was run, proving those values are accepted.
    Does anyone know why this is happening & if there is a way around it? Alternatively, is there some way that a report prompt may be based on a dynamic list of values retrieved via a Universe connection? This way I'd be able to remove the db connection for the views and have the report solely based on the Universe.
    Another issue that occurs is out of the 3 prompts, a user can select a User Name OR Number, and also must select a Period. However if the User Name or Number is left blank the message "The value is not valid" is shown. So I tried a cut-down version of the report with only the BO Universe as a data source (static prompts) and this didn't occur, i.e. I was allowed to leave either the User Name or Number empty.
    I hope this all of makes sense - let me know if not. If anyone is able to help out with any of this it would be very much appreciated.
    Cheers,
    Marco

    Please re-post if this is still an issue to the Business Objects Forum or purchase a case and have a dedicated support engineer work with you directly

  • Issue with SLA reports of Exchange 2010 MP in SCOM 2007 R2 !!

    Hi,
    I have issues with Exchange 2010 MP SLA reporting. Whenever report is run it fails on some or the other dataset(Outage**,SLAbyDAte etc.) When I digged in, I found that it is connecting to DW Exchange 2010 Availability tables + Planned maintainance +
    outage table. The tables were not available in the DW, not sure how it got removed. Initially I tried by uninstalling and installing MP(Exchange 2010  & Exchange 2010 reports both) if relevant tables get created automatically but it did
    not help and I was still facing the same issue. Then I tried to create the tables manually and check if it could resolve the issue. There was unique ID associated(different in different computer) with the name of most of the tables. I tool it from Exchange
    report data source which exists in reporting server. But I could see that table remain empty with no records there and SLA report start giving different issues stating table instances do not exist.
    Could anyone help me to restore the SLA report of Exchange 2010 MP ? How should I ensure that data start populating the tables ? I am also helpless here because we do not have correct DW dump to restore back to earlier when it was working fine.
    //BR

    Hi,
    Based on my research, to correctly install the Correlation Engine, consider the following when you install the Exchange 2010 Monitoring Management Pack:
    Determine which server will host the Correlation Engine. While not strictly required, it's strongly recommended that the Correlation Engine be installed on the Root Management Server computer.
    Make sure that you download and install the Exchange 2010 Management Pack that matches the operating system for the selected server. You can install the 32-bit or 64-bit version.
    Make sure that you run the Microsoft Installer (.msi) package on the server where you want the Exchange 2010 Management Pack and the Correlation Engine to be installed.
    After the installation is complete, the Correlation Engine service will have been installed on the server, and the Management Pack files will have been copied to the
    System Center Management Packs folder. By default, the installation directory is C:\Program Files\System Center Management Pack.
    Quote from:
    http://technet.microsoft.com/en-us/library/ee758051(v=exchg.140).aspx
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
    Regads,
    Yan Li
    Regards, Yan Li

  • Issue with SSRS Report Exporting to Excel and word

    Hi,
    When report is exporting in word and Excel getting format issue, but same report export with pdf there is  no issue.
    Regards,
    Afroz

    You need to be always careful when export format is Word and specially Excel. Sometimes report result looks good in Report Viewer and PDF too, but it may not in MS Word and MS Excel.
    You need to understand Word and Excel limitations and align all the data regions (Tablix, Rectangles, Texboxes) in correct way.
    Also, you may post the actual formatting issue that you get. (With screenshot if possible)
    Please read Limitation section in below:
    Exporting to Microsoft Word
    Exporting to Microsoft Excel
    Refer:
    Ten Common SQL Server Reporting Services Challenges and Solutions
    -Vaibhav Chaudhari

  • Issue with XML report printing on R12 instance

    Hi,
    I'm facing issue with printing xml reports on R12 instance and followed the note (How To Print XML Publisher PDF Reports Via The Concurrent Manager:metalink id:338990.1) and configured the pasta printer,still printer output is showing the junk charcters.
    Please let me know how to resolve the issue?.

    Hi Hussien,
    We are on 12.1.1 / 11g with AL32UTF8 character set, we have custom reports developed in BI publisher and some some migrated reported from earlier version.
    Both BI publisher based custom like PO/Invoice/Cheque Print & seeded reports like "Active users/responsibilites" are being generated successfuly in pdf output. when copied to desktop and printed it prints properly. But when trying to direct output to printer from concurrent request it is printng junk.
    I checked pasta configuration, all required ghostscripts tools are on the AIX box, am I missing anything in R12?
    Regards

Maybe you are looking for

  • I can´t use my creative cloud plan, that I paid, because haven´t the serial number?

    I can´t use my creative cloud plan, because haven´t the serial number? I have a mac pro. I paid the plan 2 months ago.

  • Is it possible to stream video into a PDF document with HTML 5?

    I'm trying to get around using flash to stream videos into my interactive PDF documents, as it's not supported on iOS. I'm wondering if there's a way to use HTML 5 to acomplish something similar. I have access to both InDesign CC and the latest versi

  • PA30 - Infotype 27 related to internal order activation

    Hello, I have an issue here. Currently my company is using outsoucing services to a 3rd party vendor. in our inhouse, we have OM and PA without payroll activiation function. All master data or OM master data are send through interface to 3rd party ve

  • Another Interactive Report Question

    Hi guys! Is it possible to create link which filters Interactive Report? I would like to create a report on one page which contains all the user saved interactive reports and then if another users clicks one, page changes to a page with an interactiv

  • Problem in bdc in f-22 (andreas)

    thanks andreas, it was very help full answer, thanks for it once again, t-code f-22 and f-43 iam working on 4.6c so many of fields are supressed here whike runing the bdc it shows one error many times this field doesnt exist..can u tell is there any