Issue with minidisplay adapter and wifi

I'm not sure if anyone else is having this issue, but my gf is having an issue when she connects her 13" macbook pro to her monitor via the minidisplay dvi adapter. When she connects it her wifi disconnects and has no internet access at all, but when she disconnects it the internet comes right back on. She's using a generic adapter but what would that have to with the wifi? She uses a linksys G router and is using 10.6.1

This thread caught my attention - because since switching last week from a late '06 Macbook to the Macbook Pro 13", my Wifi performance at home has gotten slow and unreliable.
I'm using the Apple MiniDP-DVI adapter, connected to a 24" Dell monitor, which has worked great for a few years on my white Macbook. My base station is a Linksys WRTSL54GS, located about 20 feet away from my desk.
So, I tried some speed tests with and without the DVI. Performance with the adapter connected is terrible, disconnected it's perfect. Further testing shows that positioning matters.
When the adapter is turned back 90 degrees, leading the monitor cable towards the back of my desk, Wifi performance is bad. When I turn the adapter so it sticks straight out the left side of the Macbook Pro, performance is normal.
This is a little weird, but an acceptable workaround for me.

Similar Messages

Classloader issue with resource adapter and webservice

The following applications are planned to be deployed on the server.
1.My-shared-lib.ear (J2EE shared library).
2.My-Service-ear.ear (Service)
3.My-Resource-Adapter.rar
The My-shared-lib.ear contains a war which has 3rd Party jars.
The My-Service-ear.ear contains the service classes and refers to the My-shared-lib.ear using a library relationship. In our case, it refers to spring, Hibernate and related jars.
The My-Resource-Adapter.rar contains the Resources Adapters. In this case it contains the Spring jars.
Points on Setup
1.The configuration does not specify any jars in the classpath.
2.There are no 3rd party jars in the ext folder.
*2.Issue Description*
Issue while starting the Service EAR.*
The development setup has an application server that has My-shared-lib.ear and My-Service-ear.ear deployed. This works fine.
The proposed deployment architecture mandates that these applications be deployed on a server where the My-Resource-Adapter.rar is already running. We can deploy & start My-shared-lib.ear . However, when we try to deploy and start My-Service-ear.ear, it fails to start with the error. The detailed exception is found in Appendix A.
Error Message:
java.lang.NoClassDefFoundError: org/hibernate/ejb/HibernatePersistence
*3.Options tried*
1.Place all the required jars in the .rar.
We placed all the 3rd party jars required for the My-Service-ear.ear in the My-Resource-Adapter.rar file. When we deployed all the 3 applications, all applications including the My-Service-ear.ear were deployed and started as well.
2.Place all the required jars in the Service ear.
We placed all the 3rd party jars required for the My-Service-ear.ear in the My-Service-ear.ear file with the <prefer-web-inf-classes>true</prefer-web-inf-classes>. When we deployed all the 3 applications, all applications including the My-Service-ear.ear were deployed and started as well.
3.Altering deployment order.
The deployment order was altered with a higher preference being given to the My-Service-ear.ear. When we deployed all the 3 applications, the application My-Service-ear.ear was deployed but failed to start giving the same exception.
*4.Analysis*
1.The spring jar though available in the library ear is being loaded from the .rar application by the classloader.
2.The above point means that the library reference being provided in the My-Service-ear.ear does not seem to have any impact.
3.In the 3rd scenario we observed that when the spring is removed from the .rar, it gets loaded from the My-shared-lib.ear. However when it tries to load Hibernate related classes, it fails.
*5.Summary*
Our understanding is that all the applications run within their own Classloaders. If classes are not found within the applications, then they should be looking at the Application Server. But here we see that they are referring to the classes in ‘.rar’ file. Hence we are unable to understand this issue. The above problem has workarounds. However, these options are not allowed as per the requirement. The requirement is that the application should run independent of the’ .rar’. Is there a better approach? Are we missing any configuration?
Edited by: user8575867 on Oct 13, 2010 11:41 PM

This thread caught my attention - because since switching last week from a late '06 Macbook to the Macbook Pro 13", my Wifi performance at home has gotten slow and unreliable.
I'm using the Apple MiniDP-DVI adapter, connected to a 24" Dell monitor, which has worked great for a few years on my white Macbook. My base station is a Linksys WRTSL54GS, located about 20 feet away from my desk.
So, I tried some speed tests with and without the DVI. Performance with the adapter connected is terrible, disconnected it's perfect. Further testing shows that positioning matters.
When the adapter is turned back 90 degrees, leading the monitor cable towards the back of my desk, Wifi performance is bad. When I turn the adapter so it sticks straight out the left side of the Macbook Pro, performance is normal.
This is a little weird, but an acceptable workaround for me.

Issues with Apple Services and WiFi

I have a 4G iPod Touch that has one of the most annoying, baffling, and downright irritating issues I've ever see with regards to WiFi signal strength.
At anything less than full strength, Apple Services just about refuse to work at all. This means:
The App Store will not connect to Apple's Servers and provide the list of updates it says are there. It just sits and thinks forever.
Once I have the list, and start updates, should the signal strength drop, my iPod reports it's unable to procure the update.
iMessages will not connect to Apple's Servers to send OR receive messages. It will report failure over, and over, and over again until the wifi is at full strength.
Meanwhile, literally everything else that requires an internet connection? Works flawlessly. Google Hangouts? Works when iMessages fails. Safari and Chrome? Work when iMessages and the App Store fail. Mail? Works. Facebook? Google+? Work. Trillian? Skype? Work. By all indications, my wifi strength is perfectly capable of supporting an internet connection, nevermind sending and receiving data, yet any connection to Apple's Servers results in failure.
The most irritating part of this? If I get it to a strong signal, especially with iMessages, and send my message, it will then work just fine where ever I take it. Eventually, however, it drops it's connection and stops receiving again.
What. The. Literal. ****.
I live in a single storey house. The router is at one end, I'm typically at the other. Construction of the house does not impede signal strength. I've owned three laptops, all of them have received a strong signal at this end of the house. I've got an Xbox 360 and a PS3 back here. Both on wifi, both recieving strong. The iPod? Reports a varying strength between two and three bars. Usually two. I think that can be interpreted as strong reception. So that said, it's not like I'm attempting to do any of this on poor wifi signal. I'd venture to say I'm not an idiot and do have reasonable expectations of when things should work and when they're likely to not work. This should be working. It does not.
I've taken this up with the Geniuses at the local Apple Store. Diagnostics came up clean, they had no other suggestions of thoughts beyond their usual "Nuke it from Orbit" option (Just restore it and hope any issues go away. I did. The issues remain.).
Does anyone else have this problem?
Is this old hardware dying and Apple's diagnostics are failing to pick it up?
Is this an iOS issue? Should I just downgrade (I have zero issues doing that).
I've dealt with this for months, and it's getting to the point where I'd just as soon chuck it at the nearest wall out of frustration.

The router is incapable of being moved (AT&T U-verse, it pretty much has to be located in the same room as the TV), and even then, I really doubt it's location is at fault when everything else reliant on wifi works, aside from Apple Services on my iPod (and again, outside of those, the iPod uses wifi just fine).
I've not seen those support documents before, but in general it's all information I've gone round in circles with previously on numerous occasions.
I figured any discussion on the actual downgrading process wouldn't be an avenue I could persue here. I'm merely curious if anyone thinks it would be a potential solution before I expend effort on it.

Ralink bluetooth adapter and wifi driver missing for HP ENVY 15-j101ex Notebook PC (ENERGY STAR)

hello theres a problem connecting my laptop with any wifi networks for a long time now. the problem comes and goes. i cant connect it with any available networks or cant detect them at times. i would like to re-install the ralink bluetooth adapter and wifi driver as i had uninstalled them. where can i get it? please help me out. its been missing for weeks now. also i cant transfer or receive any files because the ralink bluetooth adapter is missing. kindly reply asap. thank you so much.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15-j101ex Notebook and issues with the Wireless drivers. Here is a link to your driver page. Here is a link for troubleshooting the Wireless connection. I would use the section on The Windows 8 Network and Internet Troubleshooter. Here is a link that will show you how to connect a Bluetooth device to your Notebook. Hope this helps you connect. Thanks.

Issue with Apps adapter for Create_Cust_Account API

Hi ,
I need to invoke this package from apps adapter in BPEL(10.1.3.5).
Create Customer: HZ_CUST_ACCOUNT_V2PUB. create_cust_account. This is a Over loaded procedure. Look for the Procedure with these Parameters.
PROCEDURE create_cust_account (
p_init_msg_list IN VARCHAR2:= FND_API.G_FALSE,
p_cust_account_rec IN CUST_ACCOUNT_REC_TYPE,
p_organization_rec IN HZ_PARTY_V2PUB.ORGANIZATION_REC_TY
PE,
p_customer_profile_rec IN HZ_CUSTOMER_PROFILE_V2PUB.CUSTOMER
PROFILEREC_TYPE,
p_create_profile_amt IN VARCHAR2:= FND_API.G_TRUE,
x_cust_account_id OUT NUMBER,
x_account_number OUT VARCHAR2,
x_party_id OUT NUMBER,
x_party_number OUT VARCHAR2,
x_profile_id OUT NUMBER,
x_return_status OUT VARCHAR2,
x_msg_count OUT NUMBER,
x_msg_data OUT VARCHAR2
But I’m getting the following error,
An error occurred while running Jpublisher.missing method
· I’ve tried with Database adapter. But in the runtime I’m not able to pass oracle apps initialization parameter in spite of using transaction and idempotent property in partnerlink.
· Then I’ve tried to invoke fnd_global.apps_initialize first then call the package from database adapter, but it fails again, apparently its not able to execute both DBadapter in same database session although they are in same BPEL transaction.
When I’m passing the initialization parameters in adapter created wrapper procedure then its working fine and customer got created.
Please let me know where I’m going wrong or issue with apps adapter.
It’s urgent …
Thanks in Advance,
Shreekanta

Thanks for the reply.
I'm able to execute the BPEL flows using DB adapter in same session and customer got created.
But I'm wondering why I cant invoke the API using Apps adapter though its standard one.
wsdl file is not getting generated as the adapter wizard not get completed.
Do u have any idea why its giving ' error occurred while running Jpublisher.missing method' error?should I conclude that apps adapter does not support overloaded procedure.

I have a MacBook Pro 6.2 and a Samsung HPT5054 HD TV. Can I play a DVD from my Mac to my TV with an adapter and an HDMI cable or do I need an audio cable also?

Can I watch a DVD o my TV from my laptop with an adapter and HDMI cable or do I need an audio cable as well?

A seperate audio cable isn't required for your MBpro model. It will send audio over the HDMI cable if you use the proper MiniDisplay port to HDMI adapter that supports audio.
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng

Issue with DB Adapter involving multiple tables

Hi,
Am facing an issue with DB Adapter with multiple tables. Here are the details.
I have 4 tables. Header, Details,Products and Devices. The relationship is defined as follows:
Header has 1:M relationship with Details.
Details has 1:M relationship with Products.
Products has 1:M relationship with Devices.
I want to select the details from all the tables for a particular header_id and detail_id. Defined 2 parameters and query is created with parameters.
SELECT DISTINCT t0.FILE_NAME, t0.UNIQUE_SEQUENCE_NUMBER, t0.HEADER_COUNT, t0.TOTAL_DEVICE_COUNT, t0.FILE_DATE, t0.FILE_SEQ_NUMBER, t0.DEVICE_COUNT, t0.PHONE_TYPE, t0.PHONE_OWNERSHIP, t0.TRANSACTION_TYPE, t0.PURCHASE_ORDER_NUMBER, t0.CUSTOMER_ID, t0.CUSTOMER_DEST_SUFFIX, t0.LOCATION_DESTINATION, t0.MASTER_FACTORY_ORDER, t0.MASTER_FACTORY_ORDER_LINE_NUM, t0.ENT_ORDER_NUMBER, t0.DELIVERY_IDENTIFICATION_NUM, t0.UEDF_REVISION_NUM, t0.STATUS, t0.INBOUND_BPEL_INSTANCE_ID, t0.ERROR_DESCRIPTION, t0.INBOUND_FILE_VERSION, t0.CREATED_BY, t0.CREATION_DATE, t0.UPDATED_BY, t0.UPDATE_DATE FROM EDF_HEADER_STG_INT t0, EDF_DETAILS_STG_INT t1 WHERE (((t0.FILE_NAME = #file_name) AND (t1.EDF_SERIAL_TYPE = #prod_type)) AND (t1.UNIQUE_SEQUENCE_NUMBER = t0.UNIQUE_SEQUENCE_NUMBER))
I expect the DB Adapter to retrieve the records for the parameters passed. i.e only those records from details table which matches with the parameter I passes in (t1.EDF_SERIAL_TYPE = #prod_type) . But I see that the DB Adapter retrieves all records from the details table for a particular unique_sequence_number(unique_sequence_number is primary key for headers table and foreign key for details table). Could you pls tell me how can I retrieve only selected records from the details table?
Regards,
Meenu

Yes. When I run this query in DB, I get one record . While defining DB Adapter, I have imported 4 tables and also defined the relationship between the tables. In my case, column unique sequence number is primary key of headers table and foreign key of details table.The above select query is generated by the DB Adapter for the parameters I have passed in.
My data is as follows:
Headers table:
file_name uniq_seq_num
file_1.xml 220
Details table
product_id unique seq num edf_prod_type
111 220 A
112 220 B
113 220
Now, I call DB Adapter with parameters 'file_1.xml' (file_name)and 'A'(prod_type). I expect the DB adapter to retrieve only one record with product_id 111 in the detailscollection. But I see that the adapter retrieves all records from the details table without considering the value of prod_type.
Edited by: user13276819 on Mar 19, 2012 6:32 AM

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Issue with minidisplay adapter and wifi

Similar Messages

Maybe you are looking for