Issue with MSS 1.41
Good Night.
In the configuration standard that is displayed in the portal in the MSS->Team->Employee Information->General Information
In the Iview Employee search the system only display in the "table control" the employee that is in the area of resposability of the chief, but not display employee that are in other Organizational Unit that depend of the chief.
[Image|http://www.freeimagehosting.net/uploads/602f7e0681.jpg]
ie.
Organizational Unit A
Chief = Juan Perez.
Employee 1 = Forest Gumpt
Employee 2 = Potter Harry
Organizational Unit B
Chief = Jhon Uribe
Employee 3 = Jose Sanchez
The employee Employee 3 ( Jose Sanchez), depend of the Chief Juan Perez.
I want that the employee 3 is displayed in the table control.
How can solved this?
What should I do of configuration in the portal and the backend?
Regards
Not Solved
Similar Messages
-
Hi,
I am getting stylesheet issue with MSS page after Support Pack Upgrade in our SAP system.
Prior to upgrade the button was appearing with yellow background color.This has changed after upgrade and now there is no backgroud color for the button.Please suggest.
Regards,
Mrinalika
Before Support Pack Upgrade
After Support Pack Upgradeyes its mandatory to upgrade both FRONT END And backend to the compatible levels.
You cant have one at a higher level than other.
You need to read the notes which are regularly updated by SAP.
You can search for these notes by giving Stack level
Service.sap.com -
Issues with leave application in MSS
Hi Experts,
I have a issue , actually changed teh portal content of MSS applications including remaining activities and leave request in MSS
Properties changed:
Height Type: full_page from automatic
Isolation Method : UAT from embedded
I have observed adverse effects on the application for ex: manger applying leave on behalf of his DR and the leave gets deducted from mangers quota rather than Drs leave quota.
Please suggest as to what should be done as the above mentioned changes were made in order to resolve an issue with portal that was of portal page not loading fullly and to resolve this issue we changed teh config properties of portal content but this is resulting in other issues what should be done in order to come out of both the issues
Regards
PoojaPooja,
The issue is "manger applying leave on behalf of his DR and the leave gets deducted from mangers quota rather than Drs leave quota".
We all, with confidence can say; this is an issue NOT at all related to ACTIVITY:
Properties changed:
Height Type: full_page from automatic
Isolation Method : UAT from embedded
I request you to first check how the logic is implemented in above scenario i.e. X applying leave on behalf of Y and leave deduction of Y. This is root cause which needs to be analyzed and fixed.
Regards,
Ganga -
Issue with ESS/MSS Business package 1.41
Hi All
I had an issue with ESS/MSS recently we deployed Business package 1.41 it contains HCM Forms and Process also,
and we assigned the standard Manager-self-service role & Employee-self-service-role to test user but when the user is trying to access the standard application he is getting Portal runtime error.
Is there any configuration is need from HRFunctional side and Basis side
if any body have an idea please let me know ASAP.
For every MSS standard applications like :work overview ,Recruiting,Team,Talent Management,Budjet,Projects,Planning ,Organization, leave
I am getting like below error.
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 02:17_13/04/11_0031_116801250
Refer to the log file for details about this exception.
Thanks
Renu.Hi All
Here I am giving logs detail I got two logs so giving both logs , can anybody help on this issue , if any configuration need please suggest.
Full Message Text
03:19_13/04/11_0045_116801250
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Next One
Full Message Text
Exception ID:03:19_13/04/11_0045_116801250
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.work_overview/com.sap.pct.erp.mss.workoverview/com.sap.pct.erp.common.key_figure_monitor
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : P00000531
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/sap/bc/webdynpro/<WebDynproNamespace>/<WebDynproApplication>/;sap-ext-sid=<ESID[url_ENCODE]>?sap-ep-iviewhandle=007<ESID[HASH]>&sap-wd-configId=<WebDynproConfiguration>&sap-ep-iviewid=<IView.ShortID>&sap-ep-pcdunit=<IView.PCDUnit.ShortID>&sap-client=<System.client>&sap-language=<Request.Language>&sap-accessibility=<User.Accessibility[SAP_BOOL]>&sap-rtl=<LAF.RightToLeft[SAP_BOOL]>&sap-ep-version=<Portal.Version[url_ENCODE]>&sap-wd-tstamp=<$TimeStamp>&<ProducerInfo>&sap-explanation=<User.Explanation[SAP_BOOL]>&<StylesheetIntegration[IF_true PROCESS_RECURSIVE]>&<Authentication>&<DynamicParameter[PROCESS_RECURSIVE]>&<ForwardParameters[QUERYSTRING]>&<ApplicationParameter[PROCESS_RECURSIVE]>'; the problem occured at position 310. Cannot process expression <System.client> because Invalid System Attribute:
System: &#39;SAP_LocalSystem&#39;,
Attribute: &#39;client&#39;.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 29 more -
Issue with TS12300116 in Portal
Hi:
I am using standard workflow WS12300111 for automated leave and I have an issue with TS12300116 (Process Leave Request by Employee) in the portal.
Here is the scenario:
Employee submits leave request via the portal --> Manager rejects leave request via the portal --> Employee selects the 'rejected' leave request in the portal and selects 'change' to change to another date for the leave (the correct approver shows on the screen) --> After sending the request, I am getting the following error message, "You are not one of the receivers of the work item".
Under SWFVISU, I have verified the following settings for TS12300116:
APPLICATION - LeaveRequest
DYNPARAM - wi_id=${item.externalId}
PACKAGE - sap.com/ess~lea
I have also set as 'general' task for TS12300116.
Is there any other settings that I have missed or need to verify? Are there any changes that need to be made under the actual task itself (i.e. Agent field). The current setting in the agent field is: Expression &_WF_INITIATOR&.
Any insight would be greatly appreciated.
Regards,
BrianHi,
Please check the general task for the workflow tasks...
Also check the configuration by following ways for leave request ...........
ESS / MSS Configuration (SAP Best Practicesfor SAP HCM V2.600) (N06)
http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc -
Configuration Issue with my Cisco 871 Router
Hi all,
I am a newbie to the Cisco IOS.
I got a Cisco 871 Router that I'd like to use for internet connection. My LAN network is 192.168.1.0/24 and the ISP has assigned us the IP 41.212.79.108/24 and gateway 41.212.79.1.
With my current configuration, I can hit the router - 192.168.1.1 - and it's WAN port - 41.212.79.108 - but not the gateway.
Below is my current config:
Hoggers#show config
Using 4414 out of 131072 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Hoggers
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 **********************.
no aaa new-model
crypto pki trustpoint TP-self-signed-568493463
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-568493463
revocation-check none
rsakeypair TP-self-signed-568493463
crypto pki certificate chain TP-self-signed-568493463
certificate self-signed 01 nvram:IOS-Self-Sig#7.cer
dot11 syslog
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 192.168.1.2
ip dhcp excluded-address 192.168.1.3
ip dhcp excluded-address 192.168.1.4
ip dhcp excluded-address 192.168.1.5
ip dhcp excluded-address 192.168.1.6
ip dhcp excluded-address 192.168.1.7
ip dhcp excluded-address 192.168.1.8
ip dhcp excluded-address 192.168.1.9
ip dhcp excluded-address 192.168.1.10
ip dhcp excluded-address 192.168.1.100
ip dhcp excluded-address 192.168.1.90
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
ip dhcp pool LANPOOL
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 41.212.3.2 41.212.3.253
ip domain name yourdomain.com
ip name-server 41.212.3.2
ip name-server 41.212.3.253
archive
log config
hidekeys
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description Wan to Outside World
ip address 41.212.79.108 255.255.255.0
duplex auto
speed auto
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 192.168.1.1 255.255.255.0
ip tcp adjust-mss 1452
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 41.212.79.1
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source static tcp 192.168.1.31 80 interface FastEthernet4 80
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
control-plane
scheduler max-task-time 5000
end
I'll appreciate any light you can shed on what am missing.2 wireless routers can not communicate wirelessly with each other.
You need to connect cable between 2 routers and use the second wireless router as access point.
Follow this link to connect Linksys router to another router.
Some of your devices are getting same IP address. This might be the issue with DHCP server of the router. You can try DHCP reservation on the router so that each device will get unique IP address. -
Unable to use UWL userdecision with MSS tripapproval in NW2004S SP10
Hi all,
We're having some problems implementing the userdecision functionality in a customized UWL view that shows tripapprovals. We've included 2 extra columns, one for approve and one for reject. The XML code has been drawn from the standard HR UWL views that come shipped with the ESS/MSS BPs.
When executing either of the 2 userdecisions, all I get in return is an error message that says "null". Nothing more. In the uwl.log file I can see several entries that go like: "No object instance key available for attributes lookup".
I also tried to start the views shipped with ESS / MSS, but I cannot get them to work either.
So, any ideas on how to solve this? Anyone ever successfully implemented userdecisions with MSS? Is there some configuration missing in the backend or is it the UWL / portal?
My XML config file:
<!ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.tripform"/>>
/code
Hope you can help!
Systems:
EP: NW 2004S 7.0 SP10 (UNIX)
Backend: ECC 6.0 (UNIX)
Best Regards,
Hans Petter BjørnI solved this issue.
What I had to do was to move the approve and reject actions into the ItemType section instead of the View-section. Then all worked like a charm.
Regards,
Hans Petter Bjørn -
Issue with new abap webdynpro INBOX EHP5
Hello Experts,
I'm currently working on the configuration of ESS/MSS services in EHP5. We are using different services like Appraisal OSA, Learning solution,etc. I already configured the Launchpad ESS, it's working fine but now I have an issue with the new Abap webdynpro INBOX. The employee and manager see their workitem notifications correctly in their respective inbox.(I'm calling application: IBO_WDA_INBOX that I integrated in my launchpad).
My problem is that when clicking on a workitem in order that it opens me the appraisal document (in edit or display mode), I got an error saying: "There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator."
I did some search on SAP help without any results. I'm wondering how should I register workflow tasks? I saw there is a table called IBO_C_WF_TAS (I added entries e.g:
IBO_WDA_INBOX TS99700031 EXECUTEAPPRAISALDOCUMENT).
I tried also to register all my custom tasks in transaction SWFVISU.
example:
TASK: TS99700013
Visualization Type: ABAP Webdynpro
APPLICATION: HAP_MAIN_DOCUMENT
DYNPARAM : sap-wd-configId=HAP_AC_MAIN_DOC
NAMESPACE : sap
SYSTEM_ALIAS: SAP_Webdynpro_XSS (I did create a system in sap portal under System Administration with as AS property /webdynpro/dispatcher )
Could you let me know what could be wrong, what I missed? Shall I create an iView, if yes which one? which properties?
I would really appreciate any help.
Thanks!Hello Siddharth,
Thanks for you reply. Still the same issue. Following are the config I did till now:
In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
In the properties of the iView I gave:
Application Name: HAP_MAIN_DOCUMENT.
Launch in New Window: "Display in separate Headerless Portal Window".
System: SAP_ECC_HumanResources
I added the required entries in tables:
IBO_C_WF_TTAS
IBO_C_WF_ACS
IBO_V_WF_TAC
IBO_V_WF_TTAC
etc...
I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
Following are the parameters retrieved by system:
BO_NAME = SWF_WIOBN
BO_OP_NAME = NAVIGATE
LAUNCHER_PARAMETERS -> empty.??
BO_RESOLVE_MODE = USER_SET_OF_ROLES
LAUNCH_EDITOR empty where must be set?
At the end I still get the error:
There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
Any advice,
Thanks in advance -
Implementing Adobe Document Services (ADS) in portal with MSS scenario
Hi,
Has anyone implemented the new MSS scenario (ECC 6.0) on NW 2004S yet? We're trying to implement ADS to show us the trip and travelforms in PDF and have hence followed the ADS config guide for this. We used Basic Authentication and I thought this was necessary for ADS to work at all. However, if we don't want GUI users to have to apply ADSUSER username and password all the time, how do we configure this? Simply revert all the changes we have done?
I realize this is a less secure approach, but we need a setup where no users need to type any username and passwords to view their travel or salary forms.
Hope someone can help!
Best Regards,
Hans PetterHi,
yes we have. However, the setup of the ERP system where we're implementing is a multi-client SAP installation. I don't know what impact this has on the issue?
If I test the ADS connection in SM59 it connects OK without asking me for user/pwd. But when looking at a tripform in GUI for any user he/she is requested to enter the username and password for the ADS before seeing the PDF tripform.
Any other ideas? Do you have a list of steps you have done in order for me to go over my configuration and see if there's an issue with the multiclient setup?
Appreciate your help!
.: HP -
SUM issue with XSS components during maintenance on NDWI controlled landscape
Hello,
This is our first time using SUM/MOpz for a release upgrade procedure as the last JSPM update disabled the launch program.
During our test upgrade of our Enterprise Portal HUB landscape (source NW 7.02 -> target NW 7.4) with EHP5 for ERP 6.0 - XSS Self Services for backend ERP system installed. I've encountered an issue with SUM in the Configuration stage - Target Release Components screen. the only 5 objects SUM cannot handle automatically are the XSS Self Services target release components:
SAPPCUI_GP 633
SAP_ESS 633
SAP_ESS_LGP 633
SAP_MSS 630
UTXSSLGP 633
The only option I have is to scan inbox to rebuild the component list. I'm assuming, since these components are being modified by us and delivered/deployed thru NWDI track, their source location on the system is now the track name instead of the SAP delivered MAIN_ERP53VAL_C. Which means that SUM is expecting updated modified SCAs from NWDI for new 633 versions in the download directory before proceeding to next phase. However, in NWDI landscape configurator for this track, I have checked the option to mark system in NWDI control and verified SUM recognizes the system as NWDI controlled.
I'm struggling to understand the where the disconnect is between SUM and NWDI for theses components as I thought that SUM is supposed to ignore the DEV NWDI developed and wait for updates modified SCAs only in QA and PROD. Does anyone else have experience with this process to help me?
Regards,
PaulHi Paul,
We are facing the same issue although we can see in the process Overview of SUM that the system is not ticked as under NWDI Control.
But we are facing problem only for SAP ESS and SAP MSS not other components. Other three components are coming up fine and ready for deployment. This is due to the issue that only these components are identified in the BUILD COMPONENT LIST UPGRADE step as modified.
Detailed checking of the logs led us to errors identical to the KBA 2034886 - Error: Dialog eliminator ConfirmComponentsDialogEliminator does not allow to omit dialog ConfirmComponents
The system should get picked as under NWDI control and following all steps of the upgrade for NWDI driven system landscapes
Thanks and Regards,
Karan Shah
Message was edited by: Karan Shah -
Hello All,
I am working with MSS 60.1, EP 6.0 and R/3 4.7. Here we have developed a transaction code taking (Employee Number) PERNR as input and showing the details.
In MSS, we have something called Team Viewer which shows the list of employees and when u select an employee his/her details are shown in corresponding adjacent iviews.
Now this Team Viewer is working with some JSP files and is not an r3 transaction.
Would like to know how to proceed in order to pass the employee number being selected from team viewer to my custom transaction.
Any inputs will be appreciated.
regards
Atul ShrivastavaHi Ruth,
Did you ever resolve this issue?
I am getting error message 'Cannot connect to R/3' even though I have followed all the guidlines for the connections...thought maybe you have a solution.
Thanks,
Parina -
Issues with Apache integration with Crystal Reports
Hi,
We are using Apache as a reverse proxy to Crystal reports.
Couple of our users are having an issue with the Re-direction or executing the Crystal reports. The apache logs show,
[Sun Mar 08 14:42:38 2009] [error] [client 10.13.34.3] proxy: error reading status line from remote server
I am sure this is to do with the Active X settings on the IE.
Has anyone seen this issue ?
Thanks, NagHi,
If you are using ESS/MSS 1.0 then its poss thru MSS reports launchpad.
Here is the link for it :-
http://help.sap.com/saphelp_erp2005vp/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm
or you can do it from by publishing report first in BW andthen thru appintegrator/crystal iview you can put it into your portal.
Use following link to create your iView :-
http://help.sap.com/saphelp_nw04/helpdata/en/36/d4a94076b63713e10000000a155106/frameset.htm
Crystal Report User guide..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90db5db3-a6a7-2a10-bba1-a5ba583cb7a8
Regards,
Jigar Oza
Edited by: jigar oza on Sep 16, 2008 12:36 PM -
Issue with Attendance Overview Graphic
Please, kindly help our colleague.
Issue:
In MSS -> Attendance Overview
In the graphic, for "Open request", shows colour BLUE however in the legend shows colour PINK.Hello Siddharth
Thanks for reply.
I checked the notes, first two are valid if the graph is not displayed at all. The last note discusses the problem with Team Calendar.
We are facing the issue with Attendance Overview. The graph is getting displayed. But instead of pink color (for open leave requests), dark blue color gets displayed, with dark black lines around it.
If there are no open requests, graph gets displayed correctly. Please suggest the solution.
Regards,
Vinod -
Issues with Creative Cloud for teams deployment workflow
The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe SystemsHi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma -
Issue with magsafe/charging (blinks green, amber, off)
Having a quirky issue with my mid-2009 Macbook Pro.
A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
But the problem still exists.
The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
I have reset the SMC a couple times actually, but no change.
Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
Thanks!Try resetting the system management controller
http://support.apple.com/kb/HT3964?viewlocale=en_US
If that did nothing for you, try resetting the NVRAM
https://support.apple.com/kb/HT1379
Maybe you are looking for
-
I get the following message when I go to "check for updates" on iTunes (I have XP on windows). Error message: "The iTunes update server could not be contacted. Please check your internet connection or try again later". My firewall (both anti virus fi
-
Not able to update single file in a non ejb Module related jar
Hey all, I have depoyed my j2ee application <b>.ear</b> on NW webAS . This application apart from having all the ejb Modules related jar, <b>also has a jar which has all my properties files</b> being accessed by my application. Very often is i
-
I'm editing my daughter's wedding video that was shot by a friend with a high end Panasonic camera.. input file is DVCPRO HD 720p60 with a 23.98 frame speed. I have a 2..33GHZ Core2 Dual 3G mem Laptop Pro running Mac OSX 10.60.2 with an internal Hita
-
Time Machine doing full backup of external drive again
I have a Time Capsule, as well as an external data drive connected to my Mac. The external drive (named Yoda) is NOT excluded from backups. Yoda has about 703 GB of data on it. I recently replaced the hard drive inside my time capsule. Consequently,
-
Issue with KeyEvent for Command Prompt
Using below code, when Event keys like "F7" are executed on the application to test while running from openscript it works fine. Whereas if the same script is executed using command line as below, then "F7" is executed for command prompt itself inste