Issue with NI-CAN 2.7.5 DLL(s) install for custom applications
We have custom applications built on top of NI-CAN for Windows using the MS Visual C lib and header. In the past, to run our applications, we simply installed the latest NI-CAN package. Our applications would run, find and access any runtime DLLs, and be fine.
With NI-CAN 2.7.5 though, we are seeing errors in our applications that suggest they cannot see the required DLL necessary to operate. The error is:
"A dynamic link library (DLL) initialization routine failed."
Did anything change in 2.7.5 with regards to the placement or installation DLLs required to run custom NI-CAN applications?
I was able to get a little more information. Using Visual Studio to get a debug log, I see the following. With 2.7.4, the NI-CAN DLLs load and it work fine:
'MATLAB.exe': Loaded 'E:\jobarchive\Btm1\2014_02_21_h12m30s17_job89749_pass\matlab\toolbox\vnt\vnt\mexNICAN.mexw32', Symbols loaded.
'MATLAB.exe': Loaded 'C:\Windows\System32\Nican.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanFrm.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalu.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalut.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\nipal32.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanpu.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanCfq.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\nicanDBA.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanTsk.dll'
'MATLAB.exe': Loaded 'C:\Windows\System32\NiSpyLog.dll'
On 2.7.5 though, additional error information shows up:
'MATLAB.exe': Loaded 'T:\12\jpyle.Btm1.j86236.sb\matlab\toolbox\vnt\vnt\mexNICAN.mexw32', Symbols loaded.
'MATLAB.exe': Loaded 'C:\Windows\System32\Nican.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanFrm.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalu.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\nipalut.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\nipal32.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\NIcanpu.dll', Cannot find or open the PDB file
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanCfq.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\nicanDBA.dll', Binary was not built with debug information.
'MATLAB.exe': Loaded 'C:\Windows\System32\NicanTsk.dll', Cannot find or open the PDB file
'MATLAB.exe': Unloaded 'T:\12\jpyle.Btm1.j86236.sb\matlab\toolbox\vnt\vnt\mexNICAN.mexw32'
'MATLAB.exe': Unloaded 'C:\Windows\System32\Nican.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NicanTsk.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NIcanFrm.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NicanCfq.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nicanDBA.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\NIcanpu.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nipalu.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nipal32.dll'
'MATLAB.exe': Unloaded 'C:\Windows\System32\nipalut.dll'
You can see it tries to load under 2.7.5, get a bunch of PDB file issues and then immediately unloads.
Inspecting the DLLs under 2.7.4 vs 2.7.5, they look identical except for the nicanDBA.dll. That's the only one that has a version difference between NI-CAN versions. In both 2.7.4 and 2.7.5, all DLLs are being properly installed to \windows\system32 as expected so both sets are fully accessible path-wise.
Please advise.
Similar Messages
-
i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
i have told them nuumerous times that for better understanding i have made a video of it but no response..
really disspointed with your customer support.
i have uploaded them in google docs..links below.. t
he first one happened on 30th of april 2014 https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
the second happened today. i called customer care but no satisfactory respose either. https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
its still under warrenty. please help.Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
If you cannot take it person contact them to determine how to send them your phone.
You can't expect them to replace your iPhone without first examining it. -
I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?
I see printer drivers from Canon for that printer for OS X 10.7. but not scanner drivers. If the MF4140 is not recognized by the Image Capture application and Canon technical support cannot offer any assistance, all I can think of to suggest is to try a third-party scan application such as VueScan:
http://www.hamrick.com/vuescan/vuescan.htm
They offer a free trial period so you can see if it works with your Canon.
Regards. -
Can Flash be used as the GUI for an application
Can Flash be used as the GUI for an application (desktop software, not web based) written for the .NET framework? I want to author an application that would be perfect for flash as a the GUI, but it would need to be able to support a pretty full API for Flash and the wrapper application, written in c#, as they would be passing a lot of data between eachother, as well as getting and sending data over the web. So, can Flash be used in .NET? What kind of API does it have? Or am I stuck with the Windows look/feek thanks,
i'm no expert on this, but read up on Adobe Air. In the most basic terms it allows you to create flash apps that can be deployed on the desktop and will run mac/windows.
this article here might address your exact query:
http://ajaxian.com/archives/commandproxy-integrating-air-and-net -
Can anyone provide a simple css file for Apex Application
Hi,
Can anyone provide a simple css file for Apex Application please don't mention W3schools link to learn...
Regards,
Pavanin each item have ..HTML Form Element CSS Classes .e.g style="color:red", you can change whatever you want!
or using CSS at page header level.
check the page: http://apex.oracle.com/pls/otn/f?p=25110:3:0:::::
more css and JS file in Google drive(If my application/js/css breaks your computer, your database, your car's transmission anything it's your fault not mine, I have nothing to do with it and will deny all responsibility.) -
Hi
I am having several issues with Yosemite, mainly disappearing folders (title / name) but no folder or more importantly no previews of .mov or other video files nor unable to open them. I have years of these files that I want to edit in FCP X.
I have upgraded all my Apple apps so they now work in 10.10.2, but I want to revert back to Mavericks as a second partition for video work.
Is there any way I can reinstalled an older OS and downgrade my Apple apps like FCP X and Aperture so I can open, edit and produce dvd / bluray of these files.
Thanks in advance
MattThanks perermac87. I'm can make a second partition on ssd for mavericks as plenty of space, but final cut x 10.1.4 I have now needs Yosemite to open. So how can I also download older versions of my apps from the App Store?
urbkuhl I live in the uk with fibre too and downloaded 10.10.2 in under 10 mins -
I'm having a few issues with Safari, can anyone help?
Hello, all,
I'm having a few annoying little issues with Safari at the moment, hopefully someone can help and it'll be an easy fix, but I'm stumped at the moment.
1. Every time I close and quit Safari it freezes and I have to 'force quit' the app. Not the biggest of problems but it's a little annoying.
2. Once I open Safari back up it reloads with whatever window was open when I quit, even if my Mac has been turned off.
3. Safari is eating up a lot of my RAM at the moment. 'Activity Monitor' is telling me it's taking up between 2-6GB of Memory.
Anybody have any ideas?
Thanks in advance.Try a basic Safari reset.
Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site. -
Issues with hotmail - can't send or receive!
Recently installed 'mail update for Mavericks - version 1.0'. I have been having issues with my hotmail email accounts ever since! I can't send and have to reboot the machine to receive. My machine is only a couple years old and in great condition, so it's not that. I have checked all my settings, which are good. I am baffled. My gmail emails are coming and going just fine. Any suggestions?
Hello hadlockdj,
Thank you for all the information you provided about what is going on with your Hotmail account on your MacBook Pro.
You have already taken some good steps to isolate the issue. I recommend following the steps in the article below to continue isolating and troubleshooting the issue you are experiencing with Mail (you can skip the steps you have already taken):
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Issue with appletalk, can't reinstall printer, help!
Hi all,
Right now I'm having an issue with my older laser printer not showing up. It's installed, but when I go to print, I get a message that AppleTalk is inactive. So I go to the networking area and lo, the AppleTalk is indeed active. What is one to do now? Any suggestions?
It was running fine previous to some issues with my modem and router, but those have been resolved. The printing won't even occur now with a direct connection, so I've kinda got lost here.
Thanks in advance for any recommendations!
kmackHi all,
Right now I'm having an issue with my older laser
printer not showing up. It's installed, but when I go
to print, I get a message that AppleTalk is inactive.
So I go to the networking area and lo, the AppleTalk
is indeed active. What is one to do now? Any
suggestions?
How are you connected to the printer? Are both of you on a wired net, or both on a wireless net? If the computer is connected via wireless, is AirPort set to do AppleTalk, or is Ethernet set to do AppleTalk? You gotta have the right one set up.
It was running fine previous to some issues with my
modem and router, but those have been resolved. The
printing won't even occur now with a direct
connection, so I've kinda got lost here.
What kind of router do you have? Does it do AppleTalk? Are you and the printer on the same subnet? (That is, if the computer has an IP of 192.168.0.x, does the printer have an IP of 192.168.0.y, or not? If 'not', you're on different subnets and you cannot print to that printer if the router doesn't do AppleTalk.)
Thanks in advance for any recommendations!
kmack -
Hi Gurus,
I am having issue with the report (S_ALR_87013611) that is actual/plan line items for Cost Center.
When i execute the report for a cost element 510200 the amount is 23,380.13, but when i drill down on it by double click on that amount the value in obj curr is 15468.91. Hence there is the differnce. When i futher drill down by double click on the amont of 15468.91 and i go to display group currency and take the total it is 23380.13 and display in local / doc currency the amount is 15468.91. I guess due to this there is difference. The cost center & the cost elements are the same i have checket it.
My concerns is that the group curr is USD and obj curr / local curr is USD. So is group curr and doc curr is USD then when i click on dislay curr and select group curr why the amounts are changing.
Kindly adivceTry to look if there is any filtering criteria applied in the report to which you drill-down.
The difference can be also caused by the "value type" - some reports show actual and statistical costs together in one column while the others strictly show (are defined to show) only e.g. actual costs (type 04) and not the statistical costs (type 11) -
Issue with frames-based sites in Sf-3(L); Looking for confirmation
Is anyone else having issues with Safari 3 (Leopard) and frames-based sites? Specifically, frame sizes not being obeyed?
For example, phpMyAdmin's left Navi frame is, in most themes, supposed to be about 180px wide; if need be, the frame is coded to show scrollbars (again, in all the themes I've used so far anyway).
However, Safari 3.0.4 on Leopard apparently ignores this and resizes the left Navi frame to an unusably narrow width (for reasons unknown - it's not the the right frame is especially full or anything), with no scroll bars either! However, the very same phpMyAdmin site works fine in Firefox 2, where frame widths show up exactly as they are supposed to.
Is anyone else having or can duplicate this issue?I've been having this problem for months, Safari 3 beta and now Safari 3 on Tiger as well as Leopard.
-
Hello, BI Publisher folks.
Has anyone out there installed BI Publisher 10.1.3.2.1 standalone into Oracle AS 10.1.3.2.0 successfully? I'm having issues with the install. Already posted an SR (6335471.992), but the progress is slow. If anyone else has done this successfully, can you share your experience?
I know this is an E-Business-Suite-centric forum, but I couldn't find another BI Publisher forum. If there is a more appropriate forum for standalone BI Publisher issues, please direct me there.
Thank you.
Jeff Kayser
Systems Management, Inc.
[email protected]Hi, Bryan.
Thanks for your reply. I did try a manual install, but had the same problem as installing via OUI. My installs have been hanging on this command:
$ORACLE_HOME/jdk/bin/java -jar $ORACLE_HOME/j2ee/home/admin_client.jar deployer:oc4j:opmn://server.domain:6005/home oc4jadmin <password> -deploy -file $ORACLE_HOME/j2ee/home/applications/xmlpserver.ear -deploymentName xmlpserver -bindAllWebApps
I may be encountering a platform-specific issue (I'm running AMD64 64-bit hardware, RHEL 4.4 x86-64 Linux OS). The Oracle install docs say that I have to install the Linux-x86 (32-bit) port of Oracle AS 10.1.3.2.0, and prefix all of the runtime commands with "linux32 bash ", so they run in a pseudo-32-bit environment.
Do you apply any patches on top of Oracle AS 10.1.3.2.0 before you install BI Publisher 10.1.3.2.x? I just did a fresh install of Oracle AS 10.1.3.2.0, and then a fresh install of BI Publisher 10.1.3.2.1 on top of that. The BI Publisher 10.1.3.2.1 install hangs at the aforementioned place.
Thanks again for your reply.
Jeff Kayser
Systems Management, Inc.
[email protected] -
Issues with Bluetooth/Wireless Mighty Mouse since Snow Leopard Install
Hi,
I am having issues with my bluetooth wireless mighty mouse. It was fine after initially having installed Snow Leopard. However, in the past week it has become progressively more and more unresponsive. It functions perfectly normal for the first while after startup, then after a short period of time it becomes slow to respond to the mouse movements that move the cursor. Eventually it gets to the point that moving the mouse results in no cursor movement whatsoever. It also becomes unresponsive to squeezing the side buttons. There are no issues with clicking or scrolling with the track ball.
I have searched the discussion forums to find issues that pertain to "bluetooth" and "wireless mighty mouse" and have tried the following suggested remedies... Repairing my Mouse with my Mac mini. Renaming my mouse. Deleting the com.apple.Bluetooth.plist file from Macintosh HD\Library\Preferences and restarting my Mac. Reset PRAM and NVRAM. Also tried to install Bluetooth Firmware update 2.0.1 but I get an indication that the update is not needed on my Mac mini. I have also checked for software updates but there are none...
I am going to attempt resetting the SMC but am doubtful that this will help...
Can anyone help... Please... ?
Thanks,
DesI had read in another forum where someone had an understanding that the bluetooth problem had something to do with Airport/Time Capsule. I had also read about how someone was having an issue with being unable to turn off airport. (I had this same problem.)
Upon deleting a few airport related plist files (see below url) I was able to turn off/on airport AND my Mouse issue has no longer appeared... everything is working a-ok now.
http://discussions.apple.com/thread.jspa?messageID=10125976� -
Issue with retrieveing the Manager of a System User in a Custom workflow - CRM 2013
Issues with custom workflow activity in CRM 2013 On-prem
I'm trying to pass the Manager of the System
here is the code that I'm running, it gets to setting the MANAGER and stops
I put the ran the FetchXML seperatly and it does return a value so I know what bit works
public class CaseAccountManagerManagersLookup : CodeActivity
// Inputs
[Input("Enter Case")]
[ReferenceTarget("incident")]
public InArgument<EntityReference> CA { get; set; }
// Outputs
[Output("Manager Output")]
[ReferenceTarget("systemuser")]
public OutArgument<EntityReference> AMOUT { get; set; }
protected override void Execute(CodeActivityContext executionContext)
// Context
IWorkflowContext context = executionContext.GetExtension<IWorkflowContext>();
IOrganizationServiceFactory serviceFactory = executionContext.GetExtension<IOrganizationServiceFactory>();
IOrganizationService service = serviceFactory.CreateOrganizationService(context.UserId);
//Create the tracing service
ITracingService tracingService = executionContext.GetExtension<ITracingService>();
// get the account and renewals manager ID's
var CASE = CA.Get<EntityReference>(executionContext);
tracingService.Trace("Case ID = " + CASE.Id);
try
// FETCH
string fetchXml = string.Format(@"
<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'>
<entity name='incident'>
<attribute name='title' />
<attribute name='incidentid' />
<order attribute='title' descending='false' />
<filter type='and'>
<condition attribute='incidentid' operator='eq' value='{0}' />
</filter>
<link-entity name='contact' from='contactid' to='customerid' alias='ak'>
<link-entity name='account' from='accountid' to='parentcustomerid' alias='al'>
<link-entity name='systemuser' from='systemuserid' to='bc_dssalesperson' alias='am'>
<attribute name='parentsystemuserid' />
</link-entity>
</link-entity>
</link-entity>
</entity>
</fetch>", CASE.Id);
EntityCollection case_results = service.RetrieveMultiple(new FetchExpression(fetchXml));
//tracingService.Trace("fetch has run");
if (case_results.Entities.Count != 0)
foreach (var a in case_results.Entities)
//if (a.Attributes.Contains("ai_parentsystemuserid"))
tracingService.Trace("set manager id next");
var MANAGERID = (EntityReference)a.Attributes["parentsystemuserid"];
tracingService.Trace("manager id set");
AMOUT.Set(executionContext, MANAGERID);
throw new InvalidOperationException("Want to see trace");
tracingService.Trace("end ");
catch (Exception e)
throw new InvalidPluginExecutionException("Plugin - CaseAccountManagerManagerLookup - " + e.Message);
finally
throw new InvalidOperationException("Want to see trace");
PeteHello,
Try to use am.parentsystemuserid instead of just parentsystemuserid.
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog -
Can't find the Collective Search help for Customer in VD02/VD03
Hi
I ave (I hope ) an easy question for you -
I need to extent the Collective search help for Customer in VD02/VD03 with an additional elementary search help, but I can't find the name of the Collective Search Help (F1 -> Technical Information only gives Search help '=')
So, where do I find it ?
Regards
Morten NielsenOK I Found it - Called DEBI
Regards
Morten Nielsen
Maybe you are looking for
-
How can I access my old iTunes account I I don't remember apple ID and password?
-
(Vendor) Master records with individual payment
Hi for company code AD12 for all vendors we are using the individual payment because we dont´t have payment advices. And without them the vendors are unable to allocate our payment to open invoices. But the problem is: We post an invoice and a credit
-
My phone unable to connect to mailbox
Few days back I bought the nokia E63 and whenever i try to connect the mailbox it shows incoming mail server not found.Check mailbox setting... What i do?
-
"out of disk space" error with Quicktime export
Hi - just trying to export a fairly small (3 minute) video sequence to record via iDVD. When I try to export the sequence as a Quicktime movie, I get an "out of disk space" error. I don't understand why - the video is not that big, and I have over 30
-
WRT300N V2 (UK) 2.0.20 and Xbox360
Hello! I (yesterday) upgraded the firmware on my WRT300N (UK, silver casing) from 2.0.17 to 2.0.20, and now my XBox360 won't connect to it. From various Google searches, it seems that this is a know issue, and hopefully Linksys will fix it soon. In