Issue with opening a site in SharePoint Designer 2010 -The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.

I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version  of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?

Please update us SharePoint version 
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Similar Messages

  • Can't open sharepoint site with sharepoint designer 2010

    Hi there,
    We've installed SP Foundation + SP Server 2010 and set up some sites.
    when we tried to open it with SP Designer 2010, it fails and gave us some errors.
    opening SPD through site actions :
    unable to open website. possible causes:
    1. the web server may not have sharepoint server installed
    2. the web server may be temporarily out of service
    3. if you are connecting through a proxy server, the proxy settings may be incorrect
    4. an error may have occured in the web server
    opening sharepoint site through SPD:
    the folder 'http://mysp.domain.com/site/default.aspx' isn't accessible. the folder may be located in an unavailable location, protected with a password, or the filename contains a / or \.
    the thing is ... we have no problem with sharepoint designer 2007.
    any idea?

    Hi p.andrew,
    If you want to open the site use SPD, you should enable the Client Integration for the web application at first.
    Here are the steps:
    1.      
    Go to this location : “Central administration” > “Security” > “Specify authentication provider”;
    2.      
    Select the Web Application which you want to edit use SPD (SharePoint Designer 2010), and click the “Default” below the ‘Zone’;
    3.      
    Select the “Yes” radio button
     in the Client Integration section, and click the ‘Save’ Button;
    4.      
    Close and re-Open the IE;
    5.      
    Try to Open the site using SPD.
    More information about this:
    http://snahta.blogspot.com/2009/01/folder-may-be-located-in-unavailable.html
    http://skurocks.wordpress.com/2009/06/26/enable-client-integration-user-permissions-for-web-application-%E2%80%93-caution/

  • Unable to Create Workflows with either SharePoint Designer 2010 or 2013 to our SharePoint Online Service

    Hey there
    I was wondering if anyone could shed some light on our current issue using SharePoint Online (hope this question is in the correct place)
    We are using SharePoint Online and I believe we are using the SharePoint Plan 1 for EDU - which I believe is the A2 Free plan.
    I have being trying to get my head around the new changes (as we currently run a standalone 2010 deployment) and decided to see what workflow options I had.  I had read to use SharePoint Designer 2013 with the online service and after installation opened
    the package, connected to the site and tried to create a simple email workflow.  I first saw a loading screen stating
    "The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available.  The assembly strong name is Microsoft.Activities, Version 1.0.0.0, Culture=neutral, PublicKeyToken=731bf3856ad364e35.
    Contact your server administrator for more information."
    after this it tried loading some metadata and then I saw:
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    I close SPD down and rebooted and then same happened again and continues too.
    After research I applied a hotfix that was known to resolve the issue, but it still remains.  I also tried running SPD in admin mode but the same still happens.
    Lastly I tried selecting workflows 2010 from the drop down field when creating the workflow to see what happened.  I go the same.  I also keep getting the following as a pop from time to time.
    The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available.  The assembly strong name is Microsoft.Office.Workflow.Actions, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
    Contact your server administrator for more information.
    I have also tried to do the same in SharePoint Designer 2010, but receive the same massages.
    What should I be looking at or doing to help rectify this?
    Regards
    RDH

    uninstalled Language Pack and it worked!
    Uninstalling the Preview and installing SharePoint Designer 2013 resolved the error.
    http://community.office365.com/en-us/f/154/t/74327.aspx
    According to the link as linle provided, there are two deletions in local, please double check these two places:
    1.Delete all folders in the following directory:
    C:\Users\USER\AppData\Roaming\Microsoft\SharePoint Designer\ProxyAssemblyCache\
    2.Delete the files in all folders in this directory:
    C:\Users\USER\AppData\Local\Microsoft\WebsiteCache\  (don’t delete the folders, just delete the contents of the folders)
    Then, try to create a new workflow in SharePoint Designer 2013 to see if it works.
    You can first keep the list for the current status, and save it as a template which will be used to create another list.
    1.Login and locate the associated list on your SharePoint Online.
    2.Click List Settings under List tab, and click Save list as template.
    3.Type a File name, Template name, select Include Content, and click OK. Click OK.
    4.Click Site Actions->More Options->List.
    5.Locate and click the newly saved template, type a name, and click Create.
    Then, create a workflow in your SharePoint Designer 2010 associated to the new list to see if it works.
    Moreover, please check if there are any maintenances on your SharePoint Online which may cause the issue.
    1.Login to Office 365 Portal (https://portal.microsoftonline.com/).
    2.Click Service Health in the left pane of Admin page.
    3.Check the status of SharePoint Online
    If this helped you resolve your issue, please mark it Answered

  • Error while opening list workflow in SharePoint designer 2010

    Hi,
    I am trying to open list workflow in SharePoint designer 2010,its showing me the following page.
    Please help me how will be able to edit the workflow.
    While i click on "export to visio",its showing the error as "SharePoint designer encountered an error generating the visi workflow drawing".
    Please help me to get the logic of the workflow,so that i can create new one.
    Thank you

    Hi Aditi,
    Which type of workflow did you use?
    Did you create the workflow using SharePoint 2010 Designer or built-in workflow template?
    If the workflow was created using SharePoint 2010 Designer, for editing the workflow using SharePoint Designer, open the site with SharePoint 2010 Designer, then click the 'Workflows' in left panel. Then in the right panel, click the workflow that you
    want to edit, then click 'edit workflow' under Customization.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Need JavaScript for Sharepoint Designer 2010, to show a Pop-up to all the users between date range and the redirect the site

    Dear all,
    I am very new to Sharepoint designer 2010. Its better to say, i am just stepping in.
    I have sharepoint site which is accessible for all the users to update few information. But i want this site not to be accessible during a date range, say from 15th to 20th of every month.
    I am planning to have something like this: If any user tries to access this sharepoint site between 15th to 20th date range of everymonth, then the browser must show an pop-up alert saying "This site is not accessible during this date range" and Redirect
    this sharepoint site to someother site (Say http:// somesitename.xx.com) immidiately.
    I know very little about how to add Javascript in sharepoint webpart.
    Please provide the Javascript or any best alternate solution to my concern.
    Thanks in advance.

    Hi,
    From your description, my understanding is that you want to redirect sharepoint site to another site between 15th and 20th every month.
    I agree with what Sudip says. If you still want to use JS code,You could try these steps
    below:
    Open your site with SharePoint Designer.
    Click Master Pages in left navigation.
    Find file v4.master, and backup it(it is very important).
    Right click your v4.master,
    choose "Edit File in Adavance Mode".
    Add the code below into the <head/> tag.
    <script src="https://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script><script
    type="text/javascript">
    $(document).ready(function(){
    var today = new Date();  
    var day = today.getDate(); // get current day
    var id = _spPageContextInfo.userid; // get the id of current logon in user
    var boolFlg = false;
    $.ajax({
       url: _spPageContextInfo.webAbsoluteUrl + "/_api/web/SiteGroups/GetByName(\'"+"sharepoint Owners"+"\')/Users", //get users in a specified group can access the sharepoint site from 15th to 20th every
    month
       type: "GET",
       headers: {"accept": "application/json;odata=verbose"},
       success: function (data) {
          if (data.d.results) { 
             var src = data.d.results;
             for(var i = 0; i < src.length; i++){
                if(src[i].userid==id){ //check the logon in user in  the specified group or not
                   boolFlg = false;
                   break;
             if(!boolFlg){
                if(day <= 20 && day >=15){
                    alert("This site is not accessible during this date range"); // alert the message
                    location.href = "http:// somesitename.xx.com"; // redirect to another site
       error: function (xhr) {
          alert(xhr.status + ': ' + xhr.statusText);
    })</script>
    Best Regards
    Vincent Han
    TechNet Community Support

  • SharePoint Designer 2010 and Visio 2013 Issues

    I currently have Visio 2013 and SharePoint Designer 2010 installed.  I have two problems that I'm experiencing and any help would be greatly appreciated.
    1. I'm able to export an already manually created workflow from SharePoint Designer 2010 as a .vwi file without a problem and am able to import the file into Visio Pro 2013.  I
    was also able to export the file from Visio once changes were made.  However, when I go to import the file into SharePoint Designer I receive a message stating "This workflow cannot be imported because it was created in SharePoint Designer for a
    different site, or the original workflow has been moved or deleted.  To move a workflow between sites, use Save as Template (.wsp file) instead of Visio workflow drawing."  I cannot figure out how to save it in the format the prompt is suggesting
    as this is not available from the list of Save As options from Visio and when exporting from Visio the only format to do so is as a Visio Workflow Interchange (.vwi file).  When exporting from SharePoint Designer I’m only able to export as a .vwi file
    and the Save As option is not available in SharePoint Designer.  Additionally, the file location where I exported from SharePoint and importing back into SharePoint is not changing, nor is the file name. 
    2. If I create a workflow from scratch within Visio utilizing the SharePoint 2010 shapes, I'm about to export without a problem and save as a .vwi file.  I'm also able to import this workflow into SharePoint Designer, but the problem is the workflow
    never actually shows up and I do not receive any errors.
    Any help on either or both of these issues would be greatly appreciated.
    Thanks,
    Eric

    Use Visio 2010. You may be running into a compatibility issue between Visio 2013 and Designer 2010.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Issue with Opening a PDF file

    We have just completed an upgrade of one of our servers executing Reporting Services.   The upgrade was from 2005 to 2008.
    After we have rendered a report and have it saved in PDF format, we start having issues.
    If we try to open the PDF by double clicking on the file name in Windows Explorer, Adobe Reader starts, but sits unresponsive and consumes an excessive amount of CPU cycles.    It never completes the open and we have to kill the Adobe Reader process in Task Manager.
    If we start Adobe Reader, and then use the Menu to do FIle -> Open, the PDF file opens immediately.
    We have attempted both methods using several different versions of Adobe Reader.    The issue occurs on all versions prior to 9.3.
    Since we are a service organization, we are unable to force our clients to upgrade to a more current version of Adobe Reader without providing assurances that this will correct this issue.
    Has anyone else seen this type of issue with opening PDF files rendered by Reporting Services?   And if so, what is the cause and how did you correct it?
    Thanks
    Steve

    Hi there,
    Please find attached a word document which contains the error that comes up when I try to open the PDF file. This PDF was e-mailed to me from one of the Safety companies that I receive e-mails from on a regular basis. I believe I am running Windows XP and the version of Adobe is Adobe Reader X. I hope this is enough info for you.
    Janice Nadeau
    [signatue deleted by host]

  • How to restore a site deleted from SharePoint Designer 2010

    Hi All,
         I have opened a test server site in share point designer 2010, & deleted that particular site in SP designer 2010,can anyone let me know how to restore the site by using SharePoint Designer?
    I followed below mentioned procedure to restore the site using SharePoint Designer
    Open SharePoint Designer, File tab, Sites under File Tab, Open site, specified the URL of site,opened..
    It is getting connected to the Organisation network & showing "path does not exist,check the path and try again".
    Whether, Is it possible to restore the site deleted from share point designer in site collection recycle bin. or
    Is it possible to copy the site from Production server to test server.
    Waiting for an response at the earlier.
    Thanks in Advance.
    Badri

    Hi Badri,
    1.You could not restore site deleted from SharePoint designer in site collection, you can only restore the site deleted from
    UI in site collection recycle bin, deleted from end user recycle bin.
    2.You can export the site from production server, then import it to test server.
    http://technet.microsoft.com/en-us/library/ff607895(v=office.14).aspx
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

    Hi there,
    How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
    Thanks.

    You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
    Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
    Here is one more resource :
    https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
    Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
    real time and provides the captured data at granular level.

  • Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

    I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
    That's great.
    However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
    Here's a video that shows what's going on:
    mac pro issues july 7 - YouTube
    Issue #1
    Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
    When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
    I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
    Issue #2
    This is the second project you'll see in the video.
    After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
    Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
    But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
    So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
    Here are my specs:
    Mac Pro 6,1 (Late 2013)
    3 GHz 8-Core Intel Xeon E5
    64 GB 1867 MHz DDR3 ECC
    AMD FirePro D700 6144 MB (x2)
    OSX 10.9.4
    Firmware: 2.20f18
    What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
    Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
    I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
    This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
    I've reported this issue to adobe.

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • Issue with opening pdf file from web browser

    I have Acrobat Pro ver 6 and Adobe Reader 9.1 on a computer.  when my user tries to open up a pdf from the web he is getting the following error message:
    "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a WEb Browser.  Adbe Acrobat/Reader version 8 or 9 is required.  Please exit and try again."
    What also happens is that Acrobat Pro ver 6 opens up and nothing is there.
    I am not sure why he is getting that message since Reader 9.1 is installed.
    Can any one shed some light on this for me.
    This user needs to have Acrobat and Reader on his system.  I understand that there are issues with having both.
    Also he has it set up so that any PDF is opening using the Reader 9.1.
    Thanks,

    Your PC's default reader configuration for embedded PDFs has become confused, due to multiple Adobe PDF document solutions installed on one PC.
    Solution 1:
    Go to Start > Run
    Type regedit and click OK.
    Browse to the following key: HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe
    Make sure that the correct Default data value is set for the path where Adobe Reader or Acrobat are installed.
    The default installation values are:
    "C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe"
    or
    "C:\Program Files\adobe\acrobat 6.0\acrobat\Acrobat.exe" (not sure about this path.  Check on your PC to be sure)
    depending on whether Adobe Reader or Adobe Acrobat is installed.
    Solution 2:
    Configure the browser to use Acrobat or Adobe Reader as a helper application.
    If you are using Firefox to browse the web, you can change this setting in Firefox by going to:
    Tools > Options
    Click on the "Applications" Tab.
    The first item in the list should be "Adobe Acrobat Document".  Under the Action list, click the drop down arrow and select the application you want to read PDFs within the web browser.  Click OK, and you should be done.
    If you're using Internet Explorer to view PDFs, try the below steps.
    After you configure Acrobat or Adobe Reader as a helper application, the browser starts the helper application in a separate window and displays PDF files within that window. Acrobat and Adobe Reader both include a preference that lets you specify Acrobat or Adobe Reader as the helper application.
    To configure Acrobat or Adobe Reader as a helper application:
    Start Acrobat or Adobe Reader.
    Choose Edit > Preferences.
    Select Internet on the left.
    Deselect Display PDF In Browser Using [Acrobat application], and then click OK.
    Quit Acrobat or Adobe Reader.
    The next time you select a link to a PDF file in the browser, a dialog box asks what you would like to do with the file. If you select Open It, the browser opens the PDF file in Acrobat or Adobe Reader (the helper application); if you select Save It To Disk, the browser saves the PDF file to your hard drive.

  • Issue with opening .PDF files after recalling from Symantec Enterprise Vault

    Good Morning,
    I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old.  Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged.  It is inconsistent as to which files it occurs with.  I am not ready to believe that I have that many corrupt files out there.  I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
    The files are on a network share, but I also tried copying them to my local desktop and still received the error.
    I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
    Thank You
    Brian Dougherty

    Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
    Might have been damaged is pretty cut and dried in its meaning and interpretation.
    There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
    You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

  • Issues with Facebook (Mobile Site)

    I'm having issues with the Facebook App. I have the Blackberry 3G (9330) thru Sprint and I updated my Blackberry Software from 5.0 to 6.0. Since then, the Facebook (Mobile site) will allow me to type of up to around 20 characters when submitting my status or sending an email. Once it I type around 20 characters, the screen freezes and then it boots me out of the FB (Mobile site) and goes to the Bookmark page. I reinstalled that App thinking it may have not installed properly and may have affected the Facebook Mobile site but I'm still having the same problem. However, when I use the Facebook App, I'm able to update my status and send email using more than the 20 characters that's allowed in the Facebook (Mobile site). Is there something I can do to have this corrected? I like the mobile site better because I can see my friend's birthdays on the main page and it offers more options than the FB App.
    Solved!
    Go to Solution.

    After playing around with the settings, I found that if you have the "Assistive Input by Keyboard" under Options/Typing set to Predictive, it will interfere with any data that is keyed into the Facebook browser and cause it to freeze. I changed the setting to direct instead of Predictive and this resolved the issue. Thanks for your help!

  • Issue with Open Enrolment Link in ESS - Benefits

    Hi Experts,
    We are facing two issues with open Enrolment Link in ESS for benefits, Need your help in resolving this. Please find the details below :
    1.       Benefits cost is not appearing in open enrolment Screen
    Details : Monthly Contribution cost is not appearing against the Benefits Plan for which employees are already enrolled in Open Enrolment Screen, Because of this employees are not able see previous contribution before deciding on contribution amount for next Financial Year.
    2.       URL for Benefits plan Gets disappeared in Open enrolment Screen
    Details : When Contribution is removed for any Benefits Plan the corresponding URL link disappears, But this comes up when the page is refreshed.
    Could you please let us know if this is related to missing configuration or Java webdynpro code.
    Our Live system is ECC6.0 SP level A4 , Please let me know if you need more details.Looking forward for your response.
    Regards,
    Shilpa

    In regards to your first question, it could be a date issue for the infotype record.  If the records for open enrollment are set to be effective for a future date, and the current record is delimited, then you won't see it in the open enrollment screen. This is true for benefits like a flex account because they have to be re-elected every plan year.
    Let's say that any elections made in the current open enrollment period you are in take effect June 1, 2014.  If the current record has an end date before June 1, then in the enrollment screen the employee will not see the current record because SAP is looking at June 1.
    Take a look at the employee's record and at the benefit you want them to see and see what the end date is for the most recent record.

  • Unable to edit in SharePoint Designer 2010

    I am having problems editing a simple SharePoint Team Site in SharePoint Designer 2010. I'm using SharePoint 2010 Foundation Server. I'm running Windows 8.1.
    Receive pop up message:
    Unable to open Web site.  Possible causes:
    The Web server may not have SharePoint Server installed.
    The Web server may be temporarily out of service.
    If you are connecting through a proxy server, the proxy settings may be incorrect.
    An error may have occurred in the Web Server.

    Hi Vuyo,
    According to your description, my understanding is that you got an error when you opened a site with SharePoint 2010 Designer.
    Please do as the followings:
    Check whether SharePoint Designer is enabled in Center Administration->General Application Settings->configure SharePoint Designer settings, more inforamtion, please refer to
    it.
    Check your permission in that web site, ensure you have permission to open that web site in SharePoint Designer (Check in Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
    Make sure the server that hosts SharePoint 2010 Deisgner can acccess your SharePoint sie correctly. 
    If this issue still exists, please run SharePoint Products Configuration Wizard, then compare the result.
    In addition, here are some similar post for your reference:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
    http://sharepoint.stackexchange.com/questions/18006/sharepoint-designer-unable-to-open-web-site
    http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_27968087.html
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

Maybe you are looking for

  • How to Use a System Repair Disc to Restore Windows 7

    Hi ! Please start here! http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista... http://forums.toshiba.com/t5

  • Problems with debugging in Oracle sql developer

    Dear all, I have a stored procedure with about 3500 lines of code. The SP is calling some other SP's , so altogether around 30,000 lines of code is to executed. I have some delete statements in the beginning of my SP. Till nw i was able to debug and

  • About trim() for String

    I am doing assignment to deal with the xml code,for every line I read by BufferedReader I have to trim() it,I mean to take away all the white space in this line before I do something with the xml code.but I cannot make it right.the "trim()" seems doe

  • Need best practices PROCESS to schedule RMAN Backups.

    Hi All, I would like a suggestion on the following for RMAN Backups: Details: Database: - 11gR2, Size 3TB on ASM - DW database. Like suggestions on: 1) What kind of backups to schedule - Incremental along with Block backups? 2) Size required to alloc

  • CIN With-holding Tax Table

    Dear Sir, I seek the kind help from the experts  as , whic is the table to give the following information related to CIN With-holding Tax : Information is : Certificate Number / Challan Number / Challan Date With Thanks and Regards B Mittal