Issue with order or sequence of wbs elements appearance in planning layout

Hi Experts
we have an issue with order or sequence of wbs elements appearance in BPS planning layout.
In BW - 0wbs element - hierarchy order is as below
1
2
3
4
5
6
7
8
but when we check the same wbs element in BPS planning layout, it appears as below
1
2
3
4
6
7
5
8
Request you to advice how to correct the order.
Best Regards
krishna

Hi,
I came across a similar situation once. I dont remember exactly.
We have two different DataSources on wbs hierarchy. The hiearchy was loaded using the two datasources.
By mistake we were trying to use the hierarchy created by Datasource2, instead of hier created by datasource1.
Can you check that.

Similar Messages

Integration cProjects and PS. Incorrect order of the created WBS elements

There is a ERP2005 and cProjects 4.0 and automatic multilevel controlling to WBS elements is activated.
But sometimes I get the backward order of the created WBS elements. For instance, in cProjects I have the following structure:
Project definition
- Phase 1
   -- SubTask a
   -- SubTask b
- Phase 2
   -- SubTask c
   -- SubTask d
In PS I get the following structure:
Project definition
- Phase 2
   -- SubTask d
   -- SubTask c
- Phase 1
   -- SubTask b
   -- SubTask a
Does anybody know what is the reason of such behaviour?
Thanks!

Does anybody know the reason?

Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process. The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/ It seems to go through the whole install process until the startup where it crashes. I downloaded PSE 11 and at least it starts up but I haven't used it to do anything. Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
Very sad

Barbara,
Yes, I accessed the "updates" menu from the Help pull-down menu. I also accessed the updates using the Mac Terminal application with results shown in my original post. Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
Update Failed
   Updates could not be applied
   The error log file may help you in identifying the problem. The, try updating again. If the problems persist, contact customer support for further assistance.
The error log file read as follows:
   Photoshop Camera Raw 8.5
   There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
   Looking at the the output of the Mac Terminal app, it shows:
   ... hdiutil: attach failed - no mountable file systems
   Is this relevant?
Regarding your follow-up message pointing to:
Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
Thanks

Step By step Procedure to control Pm orders Budget by using Wbs element

HI,
we need step by step procedure to control PM orders Budget By using WBS Element, step by step means
1. how to create wbs element
2 how to assign budget to wbs element
3 how to control this budget through orders
Regards
Ganesh

Hi,
Please verify this link:
http://www.sap-img.com/ps006.htm
Regards
Keerthi

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

We are just users like yourself. If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
I have a 27" & do not suffer from such a problem. You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.
Think of these forums as a hospital emergency room.

Issue on distribution of quantity to WBS elements in invoice

Hi SAP Gurus,
I have an issue with the distribution of quantity to WBS elemements in SAP.
There is a purchase order with 6 line items. For the first line item a quantity of 3 is ordered and the same quantity of 3 is assigned to 7 WBS elements in the account assignment tab. There were 3 invoices created for this line item. For a particular WBS element a quantity of 1.050 was assigned and when we drilled down through the 3 invoices we found only a quantity of 1.028 is assigned to this Particular WBS element. Can someone please tell me as to why this mismatch has happened.
Thanks in advance

Hi Raman,
I am sorry but this is not the case . There are 7 WBS elements used for this PO. The quantity is distributed to 7 wbs elements as follows.
                                      Percentage                    Quantity
1st WBS element-                 8.7                             0.261
2nd WBS element                 17.4                            0.522
3rd WBS element                  18.2                            0.546
4th WBS element                  8.8                             0.264
5th WBS element                   6.4                             0.192
6th WBS element                   5.5                             0.165
7th WBS element                   35                              1.050
This is the assigned structure in the PO for all the 7 WBS elements. But when you look into the 3 invoices a quantity of 1.028 has been distributed to 7th WBS element and a quantity of 0.214 has been assigned to 5th WBS element which is causing the mismatch
Also in the 2nd and 3rd invoices only 6 wbs elements are used. Can you please tell me as to why there is a WBS element missing in the 2nd and 3rd invoices if the splitting is happening automatically.
Regards,
Dwarik

Issue with order in itunes

Good evening,
Been having an issue with the latest version of itunes and was wondering if there is a way around it. For as long as I have had my mac and itunes the listing order of artist always started with a numbered group..for example .38 Special always was the top track followed by 2Pac and 50 Cent...Now, the numbered names are at the bottom of my library list and its messed up the list in My Top Rated Playlists. I have tried clicking on the top bar in Names and it will list things from the bottom to the top but never the original way. Is there a way to fix this issue or am I stuck? Is this a recent change in itunes 7.3 because its never been like this before.
Thanks
Macbook Mac OS X (10.4.10)

Unfortunately ver. 7.3 changed the sort order of library items. Letters come first, symbol artists are classified by the first letter of their name after the symbol, number artists come last--and as I understand it pronouns such as "A" "An" "The", etc. are now totally ignored in both album and song titles.
There's not much you can do to change this--it was done to better work with the iPhone--you can only revert back to an older version of iTunes if you don't like the changes.

Can't access an agent- issues with order and installation

I had my installation for a new service today and had issues with the order. I have been trying to talk to agent after 6 hrs and I still haven't reached anyone. My order is messed up and I have a phone number with the package, but I have no clue what my number is. I need help ASAP. I'm a new comcast customer and it's already going bad. I was with Direct tv for 7 years and had no issues with them. The installation process was seamless with DTV....Comcast...not so much.

Sorry to hear about your issues with Comcast. I let a Comcast employee from the corporate office know about your issues and have requested that they reach out to you. If you don't hear from anyone soon, let me know.

Performance issue with ORDER BY

The following query runs in 60 milli sec with no order by clause. With order by it takes about 3 sec. The end result of the query is 25 records. One thing we noticed is order by is taking place after the union irrespective where we place the order by clause. Not sure how to make oracle perform order by on end result. Any thoughts truly appreciated.
SELECT *
FROM
(SELECT ROWNUM as R,
STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
TYPE_ID,
QUEUE,
FALLOUTREASON,
START_DT,
NOTIF_CREATE_DT,
ACCT_NUM,
ADSLTN,
SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM
(SELECT *
FROM
(SELECT *
FROM
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
S.TYPE_ID,
QUEUE,
null FALLOUTREASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM,
ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='2' AND SUB_TYPE_ID='2' AND status not in ( 'Terminated','Complete') ) T,
SOEG_CRM S
WHERE t.activity_id= s.activity_id
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
null INSTALL_TYPE,
null CUSTOMER_TYPE,
TYPE_ID,
QUEUE,
'Review Letters for Printing' FALLOUT_REASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM,
null ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='3' AND status not in ( 'Terminated','Complete') ) T
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
op.TYPE_ID,
QUEUE,
FALLOUT_REASON,
START_DT,
NOTIF_CREATE_DT,
ACCT_NUM,
ADSLTN,
SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='1' AND SUB_TYPE_ID='1' and status not in ( 'Terminated','Complete') ) T,
OPNOTES OP
WHERE t.activity_id= op.activity_id
UNION ALL
(SELECT t.STATUS,
TASK_ID,
PRIORITY,
INSTALL_TYPE,
CUSTOMER_TYPE,
a.TYPE_ID,
QUEUE,
null FALLOUTREASON,
START_DT,
null NOTIF_CREATE_DT,
null ACCT_NUM ,
ADSLTN,
null SDPID,
PERFORMER_DN,
SUPERVISOR_DN
FROM (select * from TASK_ACTIVITY where TYPE_ID='2' AND SUB_TYPE_ID='1' and status not in ( 'Terminated','Complete') ) T,
AELERA a
WHERE t.activity_id= a.activity_id
WHERE (PERFORMER_DN = 'cadmin1'
OR SUPERVISOR_DN in ('Address_Issues','PROCESSED','SG_EOSN','Test_Queue','Test_Queue_P','BUTST1','BUTST2','BU_UNAS','DATAR','PST','PST_ME','SVC','SVC_EX','SVC_ME','TEST_2_LETTER_QUEUE','TEST_2_OP_ESC_QUEUE','TEST_2_PROV_ESC_QUEUE','TEST_3','Test_4','Test_6','Test_8','test_5_LETTER_QUEUE','test_5_OP_ESC_QUEUE','test_5_PROV_ESC_QUEUE','cadmin1'))
AND ((STATUS = 'Pending'
AND PERFORMER_DN = QUEUE)
OR STATUS = 'Suspended'
OR STATUS = 'Acquired'
OR (STATUS = 'Pending'
AND PERFORMER_DN <> QUEUE))
AND (TYPE_ID = '2'
OR TYPE_ID = '3')
--order by priority
WHERE R >= 1
and R < 26
--order by priority
Here is the explain plan
19 SELECT STATEMENT
18 . VIEW
17 SORT [ORDER BY]
16 COUNT
15 . VIEW
14 UNION-ALL
4 NESTED LOOPS
1 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
3 APPL.SOEG_CRM TABLE ACCESS [BY INDEX ROWID]
2 APPL.XPK_SOEG_CRM INDEX [UNIQUE SCAN]
5 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
9 NESTED LOOPS
6 APPL.BSOMS_OPNOTES TABLE ACCESS [FULL]
8 APPL.TASK_ACTIVITY TABLE ACCESS [BY INDEX ROWID]
7 APPL.XPKTASK_ACTIVITY INDEX [UNIQUE SCAN]
13 NESTED LOOPS
10 APPL.TASK_ACTIVITY TABLE ACCESS [FULL]
12 APPL.AELERA TABLE ACCESS [BY INDEX ROWID]
11 APPL.XPK_AELERA INDEX [UNIQUE SCAN]

Hi,
I must admit, that I didn't read your whole query, but did you try to use a subselect?
Select a.* from (your_query) a
order by a.priorityBTW: Don't use SELECT *
Dim

Issue with live playback while editing - Premiere Elements 10

Hi there, It's been a while since I used Premiere, and decided that I would make a video. I've copied all of the media across and started editing the clip. I dragged the first clip onto the timeline and clicked the play button so I could find where I wanted to make the first cut. And there was no video, just a still frame from where the marker was. If I click the live playback area, it pauses the video and updates the still. I have tried updating the software to see if it was a bug that had been patched, but it's still there. I've never had this issue before, and would appreciate any help you guys could lend.
Thanks in advance,
-Chris.
Extra info:
OS: Windows 7 home premium 64 bit
Premiere version 10.0 (20110902.mol11.b123.280463)
Project settings [email protected] FPS, dslr preset in PAL
I'm working with mp4 files from my gopro.

I've been reading this with interest because I'm having the same issue since updating the nVidia drivers at the end of November. There is a conflict that is NOT resolved by completely uninstalling and rolling the drivers back.
Previews just will not display in the monitor in Adobe Premiere Elements 11. Audio is fine.
Clicking on the monitor window allows me to view the frame, and I can advance the frames one at a time and view them, but when I select 'Play' I just get a blank screen.
NOTE: SAME FILE AND SOFTWARE work fine on roommate's GTX550 with nVidia drivers from Jan 18 2013.
I'm running NVIDIA GeForce GTS 240,
Win7 64-Bit OS;
2.93 gigahertz Intel Core i7 870;
12 GB RAM;
Board: Dell Inc. 0G3HR7 A00 Serial Number: ..CN736040BU01GG. Bus Clock: 133 megahertz
BIOS: Dell Inc. A05 07/08/2010;
ASUS VE276 [Monitor] (27.2"vis, s/n B1LMTF048504, January 2011).
Up until the last driver update everything worked great.

Issue with if condition in smartform text elements

Hi all.
iam having a problem in smart forms
itab has 3 fields
id matnr werks
1 a p1
1 b p2
1 c p3
2 b l1
2 c l2
3 q u1
3 l u2
i neead output like in the smart form
-id = 1-
a p1
b p2
c p3
-id = 2-
b l1
c l2
-id = 3-
q u1
l u2
I have aloop in main window
itab into wa_itab.
then i have program lines
iam writing any perform statment insted iam write the code in here
input paramters wa_itab-id
output paramters id
i declared id type zabc-id under global data in global definations
CLEAR : ID.
ON CHANGE OF WA_itab-ID.
*BREAK point.
ID = WA_ITab-iD.
ENDON.
after the program lines i have a text
/: if &id& ne ' '.
---id = &id& ---
/: endif
&wa_itab-matnr& &wa_itab-werks&
now i see the output
-id = 1-
a p1
-id=- i don't need this (&id& has no value)
b p2
-id=- i don't need this
c p3
-id = 2-
b l1
-id=- i don't need this
c l2
-id = 3-
q u1
-id=- i don't need this
l u2
I checked my code if two items have same id the id has no value and you can see the output also
but for some reason its still goinng into the if condition
And also is there away that i can debugg my text elements like in scripts. my break point doesn't take me to the text elements
Thanks

1. Move only the ID into one internal table say i_id,
2. Now in your smartform, create a table and loop at i_id into wa_id.
3.Print your ID in a text, &wa_id-id&
3. Now in main area of the table Create a loop with the internal table you mentioned above with 3 elements, say, i_data into wa_data give CONDITION as wa_data-id = wa_id-id.
4. Print your other values &wa_data-matnr& &wa_data-werks&
5. outside main area, clear the work areas.
This should work fine as i use the same logic in one of my current developments!!!

Composite Web form - Issue with Ordering of dimensions in page section

Hi,
I have 2 simple web-forms having same dimensions in page section and in same order. When I create the compisite web form with these 2 simple webforms and view the same, it come in different order.
Is there any way to get the dimensions in required order / or any solution to this.
Thanks and Regards,
VM
Edited by: VM on Nov 10, 2010 12:35 AM

Hi,
What version are you using ?
Regards

Issue with the Access Sequence related to Pricing

Hi Gurus,
I have one issue related to Pricing. I have an access sequence ZPCD which has Table "A558" assigned to it.
Table A558 has fields
5 Sales Org
10 Distribution channel
20 Division
25 Customer.
But the issue is here.....in the access sequence ZPCD the field "20 Division" got deleted some how.
but i checked the table A558, it has "Division" in it.
So, summary is Table A558 has field Division, but the access sequence ZPCD is missing field Division in Access table A558.
Table 518 contains 585 condition record entries entries in Production system.
So question is how will i add Division back to the Access sequence Table A558.
Waiting for your expert advise and comments
Thank you

Dear Anitha
If I am correct, in access sequence, at field level, there is no deletion option available and hence, I am surprised how this could be possible.
Anyway, you can try in development server as follows:-
Go to V/07, select ZPCD, block the table 558 and delete. Save the data. Now try to reassign the same table and see how it works.
thanks
G. Lakshmipathi

Issues with Ordering

I've just moved to a new place and would like to get Infinity setup. When I check the area, everything seems fine. It then asks for my specific address. The place I've moved to is a home that's been split into flats. There are 5 flats in this place, all are listed except mine. I can select the other places, even just select the house number without a flat and select Infinity. However, if I try to enter my flat number, it says Infinity isn't available.
I'm thinking of just selecting my house number, not the flat so that I can order it, but with a two week wait until BT can come to install, I don't want to have any problems when they arrive.
Is there any reason why infinity wouldn't be available at my flat, yet it would at all others in the building?

have you got an active BT phone line
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Sync issues with 23.97 sequence & 25 fps audio mix...

Hey there,
I'm working on a project with footage that was shot at 23.97 fps. The audio was recorded separately at the same frame rate so picture and sound synced up properly in the project. However a mix of the project omf has come back at 25 fps and when laid back under the locked sequence we find it drifting out of sync. It wont be possible to get a new mix at 23.97 for a week or so and we need it asap. Is there a quick fix for this to convert the 25fps mix to 23.97fps so everything syncs up?
Thanks

I'm assuming you were given an 48k 16bit aiff. Audio files don't have a frame rate however, fcp does supposedly screw things up if your easy setup doesn't match the file. I've never had to deal with this, so you might do some googling or just a couple of tests importing the file. with the easy setup at both 23.97 and 25fps

Issue with order or sequence of wbs elements appearance in planning layout

Similar Messages

Maybe you are looking for