Issue with Period Control Table after copying Essbase adapter

Hi Experts,
I'm working on version 11.1.1.3 and have copied the adapters (Essbase, Pull + EPRi) in the work bench so I can add an additional target for the FDM application. However, I have an issue with the import process; it returns an error with the Time & Periods (I guess it's something to do with the Periods category).
I have reimported the Periods Control Table and updated the new application's Target Period & Year (whilst changing the system code in the Application settings to the newl adapter) and still receive the same error message.
Any direction or thoughts would be welcome.
Thanks
Mark

The time periods do not copy. You need to maintain them through the UI or upload them from excel. There is a KM article on this if you need additional detail.

Similar Messages

Issue with Period Control 03 for Depri key MSTL with 6446

Hi Gurus,
We want to use mid-month calculation for Dep. key MSTL using period control 03 (i.e. 03/03/03/03). We are also using 6446 as year-depedent Fiscal year (i.e. Jan and Dec 6 weeks other rest 4 weeks). period control 03 is pro rata at mid period
period 12 for 2009 start 11/14/09 ends 12/25/09
period 1 for 2010 start   12/26/09 ends 02/05/10
as per period control 03 mid month is Dec-04-2009 (setup in OAVH)
When i acquire an asset on Dec-04-09, the dep start date is Nov-14-09 which is correct and all calculation is correct
however when i acquire an asset on Dec-06-09 the dep start date is still Nov-14-09 which is not correct infact it should start dep from next month which will be Dec-26-09 (This is 1st period of Fiscal year 2010)
As mentioned above we are using 6-4-4-6 fiscal year
When acquiring an asset with mid month concept at year end we are facing problem in depri start date and hence calculation.
The setting in OAVH for period control 03 are as below
FV   Period Control     Desc.                             Year   Month   Day    Period    MidMonth
NL        03              Pro rata at mid period          2009    12        4         12           ticked
NL        03              Pro rata at mid period          2009    12        25       12           ticked
NL        03              Pro rata at mid period          2009    12        31        1            ticked
NL        03              Pro rata at mid period          2010    1          15        1            ticked
Thanks in advance

Deepak,
Your period 12/2009 starts and ends between 11/14/09 ends 12/25/09. Now you acquire an asset on 12/4/2009. As per OAVH, you want depreciation calculation start mid-period. Then how is depreciation start date of Nov 14, 2009 for this case?
Then you acquire an asset on Dec6, 2009. This, as per OAVH, falls into period 12/2009. Then why should the calculation start from period 1/2010 for this case?
Thanks,
Asheesh

Having an issue with Parental Controls...

Hi, I'm having an issue with Parentel Controls.
I run several student labs set with parental controls on the systems for a higher education facility. We don't have restricted access to web content (our students need to look up a lot of things, even some that would be considered racey, it's an arts school) and when I set it to "Allow Unrestricted Access" to web content, about a week or so later I'll start getting reports that content is being blocked. I go to check, and sure enough the controls are set to "restrict access to content".
I've had two interations of this issue thus far and it's a pane to go through each system (there are a lot of systems) and manually reconfigure them back to default.
Any tips?

My son could not interact with sites (log in, post) but he could access them (when parental controls were turned on). I had to go under "preferences" on Firefox (under his name) First go to the drop down the menu from the word "Firefox" then "Preferences" "Privacy" (at the top) then "Exceptions" on the right..... and add each address of the sites and pages I wanted to allow. That worked like a charm!! Maybe pull up the itunes STORE address, copy and paste it in "always allow" (you can choose "block" also.....) This is in Firefox PREFERENCES, not just the parental control section.....
Let us know if that helped! Apple was NO help. (I am an Apple fan, but I am not paying 49.99 to get a question answered by someone who didn't sound like he knew anything, anyway...) I think when you pay for a computer you deserve to have ALL the features work... Is that too much to ask?

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Issue with Update of Table VARINUM

Hi,
I am getting waiting Issues with Update of table VARINUM. Has anybody faced such an issue.
I have a lot of Jobs which are running in background. I am submitting it through a report. what can be the issue.
Regards,
Abhishek jolly

Thisi is quite old, but not answered properly yet, so there you go:
SAP generates a new job and temporary variant on report RSDBSPJS, for each HTTP call,which creates database locks on table VARINUM .
This causes any heavyweight BSP application to hang and give timeout errors.
The problem is fixed applying OSS note 1791958, which is not included in any service pack.

Issue with data dictionary -Table maintanance generator

Hi all,
I have an issue with Data dictionary, table maintenance generator. I have entered some records in a custom table (ZBCSECROLETOGRP) and changed the delivery class from C to A. When I create the table maintainance generator, I am encountered with the following errors:
1)Field ZBCSECROLETOGRP-PORTALGROUP shortened (new visible length: 000032)
2)0012 could not be generated
3)In TCTRL_ZBCSECROLETOGRP field LENGTH has the invalid value 01
My main motto is to create the table maintainace generator and transport to the furthur systems .
Please help.
ThnX in advance,
Vishal..

HI,
Regenerate the table maintenance by selecting the checkbox of "Modified field structure" => new entry & then save.
Also ensure that the new changes are not affecting old data bcz of data type changes. If that is the case, then delete the old records, regenerate table maint. & re-enter those records which you had deleted.
Thanks,
Best regards,
Prashant

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Issues with NSAPI connection before/after SP3

I'm using WinNT 4.0 sp 5, Weblogic 5.1 sp3 and Netscape 4.1 Server. (Note:
          I have do not have these problems on Solaris)
          I've been having a problem on an off with some jsps that I have written.
          They call session beans which are served by weblogic app server 5.10. The
          JSPs are located on the app server and the static pages and graphics are
          located on the NS web server. I have Netscape 4.1 as the web server. I've
          configured the NSAPI driver using weblogic/bin/proxy36.dll. Before adding
          service pack 3, I was experiencing long delays in the retreival of the jsps
          when using IE5. They seemed to work just fine with Netscape 4.7. Even
          simple jsps such as...
          ----------------test.jsp----------
          <HTML>
          <BODY>
          Test!
          </BODY>
          </HTML>
          ----------------test.jsp----------
          ... seemed to produce delays. If I stopped the browser I'd get a Dr watson.
          The Event Viewer shows the following error message
          Event ID: 1008
          Source : Preflib
          Description:
          The Open Procedure for service "https4.1" in DLL
          "d:\Netscape\Server4\bin\https\bin\nsctr.dll" failed.
          Performance data for this service will not be available.
          Status code returned is DWORD 0.
          Datat: Bytes
          0000: ff ff ff ff ÿÿÿÿ
          I looked into the service pack and found that in service pack 2 there was a
          fix for Issue 10381,
          * ISSUE 10381: Fixed a problem with messed up headers to the browser from
          NSAPI plug-in causing problems with IE5
          which I figured could fix my problem. I installed the servcie pack 3. I
          noticed that the service pack instructions left out what to do with the
          files in the service pack, of course with exception to the 2 jar files. I
          assummed that they were to be copied over the existing. After copying the
          files the proxy stopped working. Now NS asks if I want to open or save the
          file. I looked into the Netscape logs and it appears as though the server
          starts up fine. If I change back to the old proxy36.dll, I get the delays
          and the Dr Watsons, but the pages are loaded as html in the browser rather
          than downloading. I am assumming that the NS4.1 server can't use the new
          proxy36.dll.
          What am I missing?


The two problem you have described:
          - Long delays with IE5 (SP2)
          - problem with jsp's (SP3)
          has been fixed in SP4 (available now for download).
          --Vinod.
          Michael Caughey wrote:
          > I just noticed that the service pack didn't install
          > java weblogic.Admin t3://localhost:8080 VERSION
          >
          > returned:
          > WebLogic Build: 5.1.0 04/03/2000 17:13:23 #66825
          >
          > not the suggested
          > WebLogic Build: 5.1.0 Service Pack 3 .....
          >
          > This may/may not have something to do with ti.
          >
          > Also, I tried an older version of NES, it was 3.63, with both the old and
          > new proxy36.dll. I gotthe same issues.
          >
          > Also, The jsps load just fine by themselves, but the issues seems to be
          > when I include the in a frame.
          >
          > For instance....
          >
          > http://localhost/test1.jsp and http://localhost/test2.jsp bot work but the
          > following gives my delays and no response in frame 0.
          >
          > <HTML>
          > <FRAMESET COLS="50%,50%">
          > <FRAME NORESIZE="yes" SRC="test1.jsp" name="test1">
          > <FRAME NORESIZE="yes" SRC="test2.jsp" name="test2">
          > </FRAMESET>
          > <BODY>
          > </BODY>
          > </HTML>
          >
          > and if I use the new proxy36.dll It try to download the the two jsps.
          >
          > Michael Caughey <[email protected]> wrote in message
          > news:[email protected]...
          > > I'm using WinNT 4.0 sp 5, Weblogic 5.1 sp3 and Netscape 4.1 Server.
          > (Note:
          > > I have do not have these problems on Solaris)
          > >
          > > I've been having a problem on an off with some jsps that I have written.
          > > They call session beans which are served by weblogic app server 5.10. The
          > > JSPs are located on the app server and the static pages and graphics are
          > > located on the NS web server. I have Netscape 4.1 as the web server.
          > I've
          > > configured the NSAPI driver using weblogic/bin/proxy36.dll. Before
          > adding
          > > service pack 3, I was experiencing long delays in the retreival of the
          > jsps
          > > when using IE5. They seemed to work just fine with Netscape 4.7. Even
          > > simple jsps such as...
          > >
          > > ----------------test.jsp----------
          > > <HTML>
          > > <BODY>
          > > Test!
          > > </BODY>
          > > </HTML>
          > > ----------------test.jsp----------
          > >
          > > ... seemed to produce delays. If I stopped the browser I'd get a Dr
          > watson.
          > >
          > > The Event Viewer shows the following error message
          > > Event ID: 1008
          > > Source : Preflib
          > > Description:
          > > The Open Procedure for service "https4.1" in DLL
          > > "d:\Netscape\Server4\bin\https\bin\nsctr.dll" failed.
          > > Performance data for this service will not be available.
          > > Status code returned is DWORD 0.
          > >
          > > Datat: Bytes
          > > 0000: ff ff ff ff ÿÿÿÿ
          > >
          > >
          > >
          > >
          > > I looked into the service pack and found that in service pack 2 there was
          > a
          > > fix for Issue 10381,
          > > * ISSUE 10381: Fixed a problem with messed up headers to the browser
          > from
          > > NSAPI plug-in causing problems with IE5
          > > which I figured could fix my problem. I installed the servcie pack 3. I
          > > noticed that the service pack instructions left out what to do with the
          > > files in the service pack, of course with exception to the 2 jar files. I
          > > assummed that they were to be copied over the existing. After copying the
          > > files the proxy stopped working. Now NS asks if I want to open or save
          > the
          > > file. I looked into the Netscape logs and it appears as though the server
          > > starts up fine. If I change back to the old proxy36.dll, I get the delays
          > > and the Dr Watsons, but the pages are loaded as html in the browser rather
          > > than downloading. I am assumming that the NS4.1 server can't use the new
          > > proxy36.dll.
          > >
          > >
          > > What am I missing?
          > >
          > >
          > >

Issues with my iPhone 6 after update ios 8.0.2

LIst of issues after uodate
1-Email comes back after I deleted them.
2-Apps crash or do not respond
3-Screen rotation not working properly
4-Battery drain quick
5- Using iphone get frozen
6-wifi drop connection and bluetooth
7- also gps for years since i am using iPhone provide wrong address directions.

Hello hijasahmed,
Thanks for using Apple Support Communities.
I'd like you to please follow the troubleshooting steps in the article below to help resolve this issue with connecting to Wi-Fi on your iPhone.
iOS: Troubleshooting Wi-Fi networks and connections
Take care,
Alex H.

Oracle 10g - issue with "DELETE from TABLE WHERE ID in (1,2,3)" (cfqueryparam used)

Hello, everyone.
I am having issues with running a DELETE statement on an Oracle 10g database.
DELETE
FROM tableA
WHERE ID in (1,2,3)
If there is only one ID for the IN clause, it works. But if more than one ID is supplied, I get an "SQL command not properly ended" error message. Here is the query as CF:
DELETE
FROM TRAINING
WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
Anyone work with Oracle that can help me with this? I'm an experienced MS-SQL developer; Oracle is new to me.
Thanks,
^_^

Nevermind.. a co-worker just told me that I still have to use parenthesis around the values for the IN clause.

Issue with opening .PDF files after recalling from Symantec Enterprise Vault

Good Morning,
I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old. Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged. It is inconsistent as to which files it occurs with. I am not ready to believe that I have that many corrupt files out there. I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
The files are on a network share, but I also tried copying them to my local desktop and still received the error.
I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
Thank You
Brian Dougherty

Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

Having issue with texting my contacts after 4.1 update...HELP!!!!!

Everything was fine with my phone, but after the 4.1 update, i began to have issues...I go to my contacts, select Brian, text him, then immediately or later on in the day (does not matter) i want to text Nicole..i go to contacts, select Nicole, but Brian shows up..then if i select another contact like Debi, Brian shows up..it follows this pattern..i was on the phone with apple doing everything possible, they finally came to the conclusion, i had a defective device, so i go to the apple store, i get a brand new replacement, all checks out fine..i get home set it up, re do the update, all still is great, but now its back to the same contact texting sequence..so its not my device..i was on the phone with apple again today, and luckily i get a tech who had an iphone 4 with the exact identical issue, he told me he was going to contact the team so they could be made aware of this..hopefully a fix will be out soon

I too have noticed this but mine is happening on my new iphone 4 that came with the 4.1 software on it. Has anyone responded to this issue for you? I would like to see a fix for this.
Another thing I noticed that I think is related to this problem is sometimes when I select a name from my contacts on the phone then select text message and then the number or email to text to, the screen will switch to the text message mode without a receipient and I have to re-select the person I want to text from the message all over again.

Issue with imported video in after effects!

Let me start by saying I am putting together a video editing portfolio.
I have the final video edit complete and have brought it into after effects, after exporting it as a current settings out of Final Cut Pro 7. I then, accomponied it with motion graphics that include my contact info all within after effects.
The problem starts here in AE: when I press play on the timeline the entire video moves very sluggish.. Then I exported out of after effects and the final export is still sluggish with the audio cutting in and out (viewing in quicktime player) !.. Is the video supposed to be imported into after effects by a certain format and if so what? or is it supposed to be exported out of after effects by a certain format or way, and if so what? Basically I'm at the end of this process and just need to export the final video with the motion graphics out correctly so that it plays smoothly without complications.
I've looked all over and can't seem to find a steady answer to this problem. Thanks in advance, much appreciated!

When previewing, make sure that you're using RAM preview to get real-time playback:
http://helpx.adobe.com/after-effects/using/previewing.html#use_ram_preview_to_play_video_a nd_audio
See this regarding the issue with your output file stuttering:
http://forums.adobe.com/thread/684381
Most important, start here to learn the basics:
http://adobe.ly/AE_basics

Issue with Period Control Table after copying Essbase adapter

Similar Messages

Maybe you are looking for