Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

Similar Messages

  • Issues with printing purchase order

    Dear friends,
    I'm having some issues with printing purchase orders.
    Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
    Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
    The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
    What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
    kind regards,
    Camilla

    hello all,
    thanks so far for your reply.
    i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
    The output conditions fpr purchase order have also LOCL (local printer)
    The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
    Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
    Is the automatic printing something that is maintained in SPAD?
    kind regards and thanks for your help sofar

  • Issue with Info Object Transport after changing Data Type

    Hi Experts,
    We have a DSO which is running past 5 years. And recently(3 days back) we added new fields into that DSO. Delta loaded for last three days and new info object (Say XXX) data populated into DSO.
    Now the problem is, We identified that, info object data type is not correct. We used data type NUMC  instead of CHAR.So Character information is missing for that field.
    Example:
    Data from ECC: ABC123
    Data Loaded to DSO: 123 (Missed character ABC)
    So we deleted data from DSO and changed the info object data type in Development system.
    And also I have deleted only last three days delta records from DSO and transported my info object to Production. But its giving error as: Info object contains data in DSO".
    But that info object field is empty in DSO. I have already deleted last three days delta.
    Do I need to Delete all 5 years data from DSO to change the data type of recently added new info object ?
    Please give me your solutions and ideas to solve this issue.
    Thank you,
    Best Regards,
    Santhosh

    Hi Raman,
    Thank you for your answer.
    When I changed the data type of info object in Dev, I deleted the content of DSO. And same thing transported to QA as well. Before importing changed info object, I just deleted the content of DSO from QA. So transport done successfully QA.
    But in Production we have a history of past 5 years. So I cant delete all contents of DSO.
    So just deleted only the delta request's which contains data for that info object(3 days back, we moved that info object(NUMC data type) to production,So last 3 days delta only loaded for that info object). And tried to transport it. But it was failed. I am sure we need to drop all data from DSO, if I am interested to go with same info object.
    I have some comments on your first approach,
    1. If we delete info objects from Dev DSO and transport to Production will give transport failure, Why because, my previous transports errors clearly saying that info object contains data in DSO . So it wont allow to remove that info object from DSO.
    2.We are using same info object technical name in BO Data federator also. So if we change add new info objects again we need to make changes with BO as well. I am thinking this point as my last option if i cant find any other solution.
    Thank you.
    Best Regards.

  • Issue with printing newly added operations in Production Order through CO02

    Hi,
    Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
    Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
    Regards,
    Shiva

    Hi,
    1) Go to Tcode "OPK8"
    2)Select LG02 "Op Control Ticket"
    3) Double click on :List Control for Transactions" in the left hand menu tree
    4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
    Try this.

  • PRODUCTION ORDER--Qty changed after one operation----URGENT

    Dear Experts
            Hope u all R doing well
    In the production order,after one operation completed(whether it is first ,second  or last ) the system is allowing to change the qty.
    but we want the system to disallow  the qty change.
    could anybody can help, is there any configuration settings inside?
    waiting for your valuable response
    Thanks in advance

    Hi,
    Sorry for the delay.
    Pl. follow the steps below.
    1. Create a status profile Eg: s1 usng t.code bs02.
    2. Enter status no. as 1, status as CRTD, a description, tick Initial status & lower status no. as 1 & higher status no. as 2.
    3.In the second line enter status no. as 2, status as REL, a description,  & lower status no. as 1 & higher status no. as 3.
    4.Choose Object type tab.
    5. Choose PP/PM: Order header.(tick)
    6.Then come back to main screen & double click REL.
    7.Click the create icon in the top.
    8.Choose Release & then choose radio button under <b>SET.</b>
    9.Then come back to main screen & again double click REL & then choose create & select change & check the radio button under <b>FORBID</b> & then save.
    10. In t.code OPJH(order type), choose your order type & then assign the status profile( Eg:S1)
    11.Now convert the planned order into production order.Release the order & save.
    Further changes cannot be made in the production order.
    Pl. give feedback after testing.
    Regards,
    S.D.Senthilkumar

  • Print Production Order with status CRTD

    Hi gurus,
    Our system is configured to print production order when the order is released, but when the order is in status CRTD,Created, (not Released) we try print the order an error message appears "Object ORD xxxxxx has system status CRTD (Created).  According to this status, transaction 'Print order (original)' is not allowed".
    Is it possible print orders before release action?
    Thank you, I have points for the best answers.

    Through transaction  BS22 you can configure the system to Print the Order even at CRTD status.

  • I have been having issues with my computer lagging after installing lion.

    I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Every time system create new production order after releasing sales order c

    Hi Guru,
    FG material strategy: 82 (sales order creates production order).
    After creating the sales order it goes in to credit block. Whenever we release sales order from credit block through VKM1, system has created production order. We confirmed this production order and delivered.
    But after this sales person change the sales order value, because of which again sales order goes into the credit block and after releasing sales order from credit block system create new production order even if one production order already confirmed and delivered against the same sales order.
    *Every time system create new production order after releasing sales order credit block.
    Thanx & regards
    pnu

    PNU,
    So, to restate:
    In MD04, you have Unrestricted Sales order Stock ('E' Stock) on hand.
    In the same MRP segment, and against the same Storage Location as the stock, you have a Sales Order requirement that was recently blocked and unblocked.
    During the unblocking event, the system produced a new production order.
    This is not normal.  If the above accurately depicts your situation, I would look for an altered Strategy 82, or a userexit.  SAP ATP (the beginning event of the Strat 82 process) will normally first check for the availability of stock.  Only if the stock is not available, then it will create the new production order.
    Best Regards,
    DB49

  • Acrobat 9 Pro issues with printing and now updating  !!! :(

    hello
    I had an issues with printing from my gmail account or from windows live mail
    so I made a complete re-installation
    now I am stuck with version 9.3.0 and when I check for updates I get a message
    UPDATER IS ALREADY RUNNING
    only... it's not running and nothing is updating !
    I made a restart... just in case... it did not change anything
    as to the printing issue, in case some of you have met it and cleared it...(hope)
    this was with version 9.5.0
    I get no error message but no pdf is created, only a text document with this :
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    72gmvi not found, using Courier.
    44dcmta not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: xshow ]%%
    Stack:
    [96 96 97 72 96 42 64 0]
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    not a good start for my week... I hope yours is nicer
    I'm running Win7 Ultimate x64

    thanks Mylenium
    the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
    it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
    as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
    does my question make sense ????

  • Issue with  print image in air

    hey frnd,
    plz check this link
    http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
    hey frnds,
    while using this multiple print datagrid code, getting 1 issue with
    print image in printheader mxml file.
    I'm adding 1 image tag and runtime getting image path in variable and
    want to print tht image in header ,
    but it is not get printed but if i'm giving @Embed image as a source
    then it is print.
    Is any way there to print runtime image after adding in printheader
    file ?
    thx in advanced,
    [email protected]

    is any solution there ?

  • Production order qty change tracking

    Dear gurus,
    In a production order qunatity change should be tracked.Say for eg prodn order qty is 100.User is changing  to 200.As a client requirement they want he change historya of PIR change history.The same tracking reuired for Component change qty.plz through some light.Without OCM any other solution plz guide me
            Please through some light
                             -Guna

    Hi,
    There is a way by which the quantity field in the production order can be fixed and made non modifiable
    You need to create a status profile in bs02
    Double click the status profile.
    Enter the user status as crtd
    Tick the initial status as enabled
    Place the cursor on the status profile
    Select the object type as PP ORDER HEADER
    Now choose the user status
    Double click the user status
    Goto create mode
    select change and set forbid radio button
    save.
    Assign this status profile to order type in opjh tcode.
    Now once you have created the production order the system automatically forbids any change.
    And
    OCM is option to track it or authorization feild to restrict it.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Jul 22, 2008 10:38 AM

  • Production Order BOM change

    Dear Expers,
    How can i restrict the Production order BOM Change. Please tell me with the steps.
    Other than screen variant.
    Regards
    Raghu

    Hi,
    To do this you can use below mentioned processed.
    1. create a user status and give approval to the order at creation and the user will not be able to change any thing in the process order.
    2. You can use user exits to restrict changes changes at "materials" screen.
    Hope this will help.
    regards,
    kaushik

  • Upgrade production order after modification BOM

    Dear Gurus,
    we need upgrade the quantity requirement in the production order after the modification the quantity in the Bom ?
    Is possible read newly the Bom whit the one operation confirmed ?
    The component modificated don't allocated a this operation but for example a the operation in status initial.
    Thanls a lot
    PP TEAM
    Daniele Pistilli

    Dear Toto,
    if only one operation is confirmed then cancelation for that operation
    then go for READ PP MASTER DATA option
    or if u have relesed only one operation & confirmed only that operation (not full order)
    then try to change in component in PRD prder itself in CO02 & realse that particular operation & confirm it
    check & revert back
    Regards
    kumar

  • Problem printing production order.

    Hi  guys
    this is my first post. i have a problem  printing production orders.when i give a print. its printing only 2 or  3 line.what should i do to add  some more information to my production order.and where can i view the print preview of my production order.

    Hi,
    The production order can be printed in CO02 screen itself.(Ctrl+P). To define what to be printed, you need to identify/define the correct list in the transaction OPK8. Once the correct combination is selected for the required plant and order type, this can be printed in production order.
    But for the preview after printing, you can view the spools created in SP01.
    Or T code CO04N or CO04 is meant for printing production orders
    Need to do the setting in OPK8
    First check the configutaion link below and then come back.
    http://help.sap.com/saphelp_40b/helpdata/en/3a/72369adc56d11195100060b03c6b76/frameset.htm
    Regards,
    R.Brahmankar

  • CPU Issues with music production. LOGIC 8

    CPU Issues with music production.
    Hey guys. I bet this sort of question has been asked so many times, but i really have spent a long time searching google to get an answer. I have had no luck. I found many things on the subject, but nothing about this exact situation.
    Okay, I have a Macbook 4.1 which has 2gb of ram, 2.1 GHz Intel core 2 duo processor, and a 111 gb HD with a rpm of 5400.
    I have been having major CPU overloads whilst using Logic 8, And it is much worse when using Pro Tools 7.2 M-Powered.
    Now, im not that knowledgeable with computer stuff, but I have a plan.
    Im about to upgrade my ram to 4gb, and im getting a new hard drive that will be 320 gb and will be 7200 rpm and 16gb cache (whatever that means).
    I believe that having a hard drive at 7200 rpm is pretty essential for music programs like these.
    Now hopefully this will help me with the CPU, as i have found out I cant upgrade the processor as its soldered on.
    Will this machine be able to handle Logic Pro 8 after the mod??
    The real question i guess is: Is a "2.1 GHz Intel Core 2 Duo" processor enough to happily run logic 8?
    P.S I will not be recording audio. I use the synths etc included.
    Thanks in advance guys.

    Alexander Farrar wrote:
    Okay, I have a Macbook 4.1 which has 2gb of ram, 2.1 GHz Intel core 2 duo processor, and a 111 gb HD with a rpm of 5400.
    111Gigs is a small disk
    How much free space in your system disk?
    when a disk contain files from over than 80% and only about 20% is free the speed of the hard drive goes down... some disk can loose more than 50% of fast addressing speed
    Leopard require at least 50GB free space for run without problem!
    for better performance up to 1/3 of the disk size should be required...
    I have been having major CPU overloads whilst using Logic 8, And it is much worse when using Pro Tools 7.2 M-Powered.
    you use Logic with a Digidesign Drivers?
    try to disconnect the Digi device and use Internal Audio of your Mac...
    maybe only that can solve your issue.
    Im about to upgrade my ram to 4gb, and im getting a new hard drive that will be 320 gb and will be 7200 rpm and 16gb cache (whatever that means).
    buying a 320GB at 7200?
    I suggest you a 500GB at 5400 RPM
    the 7200 Hard drive are not so good for stay inside Macbook chassis
    the working temperature in a 7200 RPM disk should be cause slower speed than a more cool/fresh 5400 RPM
    The temperature rise up if disk is full over than 1/3 of its capabilities...
    (this rules are related with Disk performance but can be affected also CPU power in the real time processing because the system run on the same disk)
    The hard drive temperature is strictly related with disk speed performance
    and logic use a lot of streaming from to disc access for the EXS24 virtual memory and other Instruments and Synths...
    *this can be the primary cause of CPU spikes*
    I believe that having a hard drive at 7200 rpm is pretty essential for music programs like these.
    I suggest a 500GB 5400 RPM!
    G

Maybe you are looking for