Issue with RMAN DUPLICATE FROM ACTIVE DATABASE....
Hi All,
Not sure if I should continue from a closed thread, so apologies, opening a new one..
I ran the following command:
DUPLICATE TARGET DATABASE TO ' AUX1"
from ACTIVE DATABASE
NOFILENAMECHECK:
So the copy went in fine...so I am confiused now....why when doing a recover, i get the below errors from output:
archived log for thread 1 with sequence 68346 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68346_ARCH_D-RBS_ID-295728924
5_S-68346_T-1_A-780292253_C1OQVOSU_.ARC
archived log for thread 1 with sequence 68347 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68347_ARCH_D-RBS_ID-295728924
5_S-68347_T-1_A-780292253_C3OQVOU1_.ARC
archived log for thread 1 with sequence 68348 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68348_ARCH_D-RBS_ID-295728924
5_S-68348_T-1_A-780292253_C4OQVOU6_.ARC
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/08/2013 07:36:04
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 64713 and start
ing SCN of 12728145997 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64712 and start
ing SCN of 12728133322 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64711 and start
ing SCN of 12728121403 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64709 and start
ing SCN of 12727730726 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64708 and start
ing SCN of 12727717143 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64707 and start
ing SCN of 12727701799 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64704 and start
ing SCN of 12726617917 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64703 and start
ing SCN of 12726605080 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64702 and start
No archivelogs were purged or backed up and the current logs were retained....so im somewhat confused....i am not restoring from backup but running active duplicate...
should I re-run the command with:
SET UNTIL SEQUENCE 64713 THREAD 1
This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUXDB)
(ORACLE_HOME = <your oracle home>)
(SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again
Similar Messages
-
ORA-01017 when RMAN duplicate from active database
Hello, ORACLE guru's!
I've got some trouble trying to duplicate DB via RMAN duplicate from active database.
The script is simple:
run
allocate channel ch1 device type disk;
allocate auxiliary channel aux1 device type disk;
duplicate target database to mydb from active database;
The problem is in this statement:
Starting backup at 15-JAN-14
channel ch1: starting datafile copy
copying current control file
Oracle instance started
Total System Global Area 10689474560 bytes
Fixed Size 2237776 bytes
Variable Size 4227861168 bytes
Database Buffers 6442450944 bytes
Redo Buffers 16924672 bytes
contents of Memory Script:
sql clone "alter system set db_name =
''mydb'' comment=
''Reset to original value by RMAN'' scope=spfile";
sql clone "alter system reset db_unique_name scope=spfile";
shutdown clone immediate;
executing Memory Script
sql statement: alter system set db_name = ''mydb'' comment= ''Reset to original value by RMAN'' scope=spfile
sql statement: alter system reset db_unique_name scope=spfile
Oracle instance shut down
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/15/2014 12:16:07
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ch1 channel at 01/15/2014 12:15:57
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
RMAN>
RMAN>change:
export ORACLE_SID="mydb"
export ORACLE_HOME="/u/app/oracle/product/11.2/db_1"
FILE1 = "/u/app/oracle/product/11.2/db_1/bin/"
cat > $FILE1/sqlplus sys/karen as sysdba << EOF
startup nomount;
exit;
EOF
cat > $FILE1/rman target sys/karen@mytargetdb auxiliary sys/karen@mydb << EOF
run
allocate channel ch1 device type disk;
allocate auxiliary channel aux1 device type disk;
duplicate target database to mydb from active database;
EOF
tell us if it works and again, from what host are you running the script? -
RMAN duplicate from ACTIVE DATABASE
Hi,
I am trying to create a new 11.2.0.1 database by duplicating an existing 11.2.0.1 database using Rman with 'from active database' option.
I have created a password file and listener is configured as well.
The aux database is started in nomount state.
rman
connect target sys/pwd123@SRCDB
connect auxiliary sys/pwd123@AUXDB
duplicate target database to AUXDB
FROM ACTIVE DATABASE;
This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Regards,
AravindThis fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUXDB)
(ORACLE_HOME = <your oracle home>)
(SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again -
Rman duplicate from active database slow
Hi,
I am doing a duplicate database from active database, it seems to either slow or hanging. Can someone suggest any tips or pointers to debug this issue?
Source: 11gR2 3-node RAC (only one instance running) on Solaris 10, about 25TB
Target: 1-node, 11gR2 on Solaris 10
Thanks!source:
SID SERIAL# CONTEXT SOFAR TOTALWORK %_complete
1555 7013 1 43730494 142245833 30.74
2332 8079 1 44307262 102713507 43.14
2235 10987 1 47052222 105912610 44.43
2622 5033 1 48406910 86329752 56.07
2040 49651 1 49519038 111411200 44.45
1846 20307 1 43488574 138674977 31.36
1459 26683 1 44936702 272716852 16.48
7 rows selected.
Target: no rows -
RMAN restore from active database, ASM
I'm attempting to refresh a stage database from a prod database using RMAN restore from active database. Both are on ASM. After working through various hurdles, I've got one issue I'm a bit stuck on. I've got a handful of data files that do NOT have OMF names (ie MSTRDATA/mstrmdpd/datafile/gsa_indx instead of MSTRDATA/mstrmdpd/datafile/gsa_indx.351.714779777) and these are failing when I do the restore. The syntax I'm using in RMAN is as follows:
duplicate target database to dwstage
from active database
spfile parameter_value_convert 'dwprod','dwstage'
SET DB_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE'
SET LOG_FILE_NAME_CONVERT '+DWPROD','+DWSTAGE';
The error message I'm getting is this:
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/21/2011 13:26:24
ORA-17628: Oracle error 19505 returned by remote Oracle server
continuing other job steps, job failed will not be re-run
Normally from what I've seen/read this error can be traced back to needing to pre-create the directories for the controlfiles etc, but since 90% of the datafiles copied correctly...
Any suggestions as to a way around this, or am I going to be forced to restore from a backupset?This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUXDB)
(ORACLE_HOME = <your oracle home>)
(SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again -
Duplicate from Active database
Hi,
I have RAC primary database running in 11.2.0.3 with linux 5(dc). We also have configured RAC cluster on DR site recently.Now we need to create stanby database on DR site.
For this is have following doubts
My database size is 6TB(from dba_segmnets) and total is 14TB(from dba_data_files)
1) How duplicate of active database works internally? Does it copy the exact file to standby site for example copy datafile(which is of 5GB in size) and send it over to standby over network?
2) Both primary and standby sites are in different states, so i was thinking to backup the primary database first to tapes and then courier tapes to dr site and then finally restore and recover standby.
I have doubts in above approaches which should i implement. I think active database duplication will skip a)backup time b) courier time. Is that correct?
However if my database size is 14TB and using 1st method, does it send files to dr worth of 14TB size?I am working on active database duplication and has below issue. Can any one help me on this?
RMAN> connect target sys@Pa305
connected to target database: PA305 (DBID=2787277616)
RMAN> connect auxiliary sys@Pb305
connected to auxiliary database: PB305 (not mounted)
RMAN> DUPLICATE TARGET DATABASE
TO 'PB305'
FROM ACTIVE DATABASE
2> 3> 4> ;
Starting Duplicate Db at 31-JUL-2012 17:20:07
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=2838 instance=PB3051 device type=DISK
contents of Memory Script:
sql clone "alter system set control_files =
''+DG_075_DATA01/PB305/controlfile/current.270.790104009'', ''+DG_075_FRA01/PB305/controlfile/current.286.790104009'' comment=
''Set by RMAN'' scope=spfile";
sql clone "alter system set db_name =
''PA305'' comment=
''Modified by RMAN duplicate'' scope=spfile";
sql clone "alter system set db_unique_name =
''PB305'' comment=
''Modified by RMAN duplicate'' scope=spfile";
shutdown clone immediate;
startup clone force nomount
backup as copy current controlfile auxiliary format '+DG_075_DATA01/PB305/controlfile/current.269.790104009';
restore clone controlfile to '+DG_075_FRA01/PB305/controlfile/current.288.790104009' from
'+DG_075_DATA01/PB305/controlfile/current.269.790104009';
sql clone "alter system set control_files =
''+DG_075_DATA01/PB305/controlfile/current.269.790104009'', ''+DG_075_FRA01/PB305/controlfile/current.288.790104009'' comment=
''Set by RMAN'' scope=spfile";
shutdown clone immediate;
startup clone nomount;
alter clone database mount;
executing Memory Script
sql statement: alter system set control_files = ''+DG_075_DATA01/PB305/controlfile/current.270.790104009'', ''+DG_075_FRA01/PB305/controlfile/current.286.790104009'' comment= ''Set by RMAN'' scope=spfile
sql statement: alter system set db_name = ''PA305'' comment= ''Modified by RMAN duplicate'' scope=spfile
sql statement: alter system set db_unique_name = ''PB305'' comment= ''Modified by RMAN duplicate'' scope=spfile
Oracle instance shut down
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/31/2012 17:20:18
RMAN-06174: not connected to auxiliary database
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
RMAN> -
Is duplicate from active database supported in Standard Edition?
Hi,
I'm trying to clone a database whithout a staging area.
After having the clone instance and the sql*net configuration set up, I'm running this
command in the rman-commandline:
Recovery Manager: Release 11.1.0.7.0 - Production on Tue Nov 2 15:52:31 201
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: LOCALDB (DBID=370732657)
connected to auxiliary database: LOCALFB (not mounted)
RMAN> run {
duplicate target database to localfb from active database
pfile=C:\Oracle\admin\ProdFB\pfile\init.ora
db_file_name_convert=('PROD', 'ProdFB')
logfile group 1 ('C:\OraData\ProdFB\Redo/log01A.dbf','C:\OraData\ProdFB\log01B.dbf') size 100m,
group 2 ('C:\OraData\ProdFB\Redo/log02A.dbf','C:\OraData\ProdFB/log02B.dbf') size 100m,
group 3 ('C:\OraData\ProdFB\Redo/log03A.dbf','C:\OraData\ProdFB/log03B.dbf') size 100m;
Starting Duplicate Db at 02.11.10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=594 device type=DISK
contents of Memory Script:
set newname for datafile 1 to
"C:\ORADATA\PRODFB\TS\SYSTEM01.DBF";
set newname for datafile 2 to
"C:\ORADATA\PRODFB\TS\SYSAUX01.DBF";
set newname for datafile 3 to
"C:\ORADATA\PRODFB\TS\UNDO01.DBF";
set newname for datafile 4 to
"C:\ORADATA\PRODFB\TS\PRODFB01.DBF";
set newname for datafile 5 to
"C:\ORADATA\PRODFB\TS\PIMAINT01.DBF";
set newname for datafile 6 to
"C:\ORADATA\PRODFB\TS\INDX01.DBF";
backup as copy reuse
datafile 1 auxiliary format
"C:\ORADATA\PRODFB\TS\SYSTEM01.DBF" datafile
2 auxiliary format
"C:\ORADATA\PRODFB\TS\SYSAUX01.DBF" datafile
3 auxiliary format
"C:\ORADATA\PRODFB\TS\UNDO01.DBF" datafile
4 auxiliary format
"C:\ORADATA\PRODFB\TS\PRODFB01.DBF" datafile
5 auxiliary format
"C:\ORADATA\PRODFB\TS\PIMAINT01.DBF" datafile
6 auxiliary format
"C:\ORADATA\PRODFB\TS\INDX01.DBF" ;
sql 'alter system archive log current';
executing Memory Script
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting backup at 02.11.10
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/02/2010 15:52:46
RMAN-03015: error occurred in stored script Memory Script
RMAN-06181: multiple channels require Enterprise Edition
RMAN>
As you can see, I get the error RMAN-06181.
So my question is: is duplication from active database supported in the standard edition?
If it is, then what do I need th do to make this work?
Thanks for your help.Yes, this is it.
I tested only three cases before:
- not allocating any channel
- allocating local channel only
- allocating auxiliary channel only
I need to allocate both channels in the run block, then it works.
Thanks a lot for your help.
run {
allocate channel c1 device type disk;
allocate auxiliary channel c2 device type disk;
duplicate target database to localfb from active database
pfile=C:\Oracle\admin\ProdFB\pfile\init.ora
db_file_name_convert=('PROD', 'ProdFB')
logfile group 1 ('C:\OraData\ProdFB\Redo/log01A.dbf','C:\OraData\ProdFB\Redo/log01B.dbf') size 100m,
group 2 ('C:\OraData\ProdFB\Redo/log02A.dbf','C:\OraData\ProdFB\Redo/log02B.dbf') size 100m,
group 3 ('C:\OraData\ProdFB\Redo/log03A.dbf','C:\OraData\ProdFB\Redo/log03B.dbf') size 100m;
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=580 device type=DISK
RMAN-06908: WARNING: operation will not run in parallel on the allocated channels
RMAN-06909: WARNING: parallelism require Enterprise Edition
allocated channel: c2
channel c2: SID=591 device type=DISK
Starting Duplicate Db at 04.11.10
: -
关于Rman Duplicate from active databse 到一个新库中出现的问题
OS:
[oravis@prcsgidb1 dbs]$ uname -a
Linux xxxx 2.6.32-200.13.1.el5uek #1 SMP Wed Jul 27 21:02:33 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
DATABASE:单机
target: hzdbacoe 11.2.0.3
auxiliary: dbacoe 11.2.0.3
发生情景
将旧库home目录Clone到同机另一文件夹并做完所有操作后,欲进行duplicate
在新home目录中
1.新建pfile initdbacoe.ora如下
DB_NAME=dbacoe
DB_FILE_NAME_CONVERT=(/u03/apps/oracle/oradata/hzdbacoe/,/u03/app/oracle/oradata/dbacoe/)
LOG_FILE_NAME_CONVERT=(/u03/apps/oracle/oradata/hzdbacoe/,/u03/app/oracle/oradata/dbacoe/)
2.新建orapw file=orapwdbacoe.ora password=oracle
3.mkdir -p $ORACLE_BASE/oradata/dbacoe并赋好权限
4.根据该pfile起至 nomount阶段instance为dbacoe
5.在该目录的listener.ora中新建一个监听,并将dbacoe服务注册进入该监听,端口为1530
在原库所在环境变量中
修改tnsname.ora 加入dbacoe信息如下:
dbacoe =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxxx.xxx.xxx)(PORT = 1530))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dbacoe)
[]rman
RMAN>connect target sys/allen1218
connected to target database: HZDBACOE (DBID=2102554453)
RMAN>connect auxiliary sys/oracle@dbacoe
connected to auxiliary database: DBACOE (not mounted)
RMAN>duplicate target database to dbacoe from active database nofilenamecheck;(ps:之前第一次有运行过一次duplicate,未加nofilenamecheck,报错后加上)
结果在复制oradata文件时报错如下
Starting backup at 20121107 18:22:54
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=178 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=190 device type=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: SID=201 device type=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: SID=2 device type=DISK
channel ORA_DISK_1: starting datafile copy
copying current control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/07/2012 18:22:55
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/07/2012 18:22:55
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
oradata文件夹属主信息如下
[oravis@prcsgidb1 oracle]$ ls -ltr
total 20
drwx------ 3 oravis dba 4096 Nov 7 14:54 product
drwxr-xr-x 2 oravis dba 4096 Nov 7 15:41 checkpoints
drwxr-x--- 3 oravis dba 4096 Nov 7 16:12 cfgtoollogs
drwx------ 3 oravis dba 4096 Nov 7 17:11 oradata
drwxrwxr-x 4 oravis dba 4096 Nov 7 17:23 diag
我知道错误非常明显,但我不知道是哪个username/password出错,这之间的过程只有建orapw 文件时才有password设置进入,之前的home也将属主均改为oravis了。找到原因了,还是官方文档看得不仔细
2.At the RMAN prompt, run CONNECT commands for the database instances required for your duplication technique:
◦For active database duplication, you must connect to the source database as TARGET and to the auxiliary instance as AUXILIARY. You must use the same SYSDBA password for both instances and must supply the net service name to connect to the AUXILIARY instance. A recovery catalog connection is optional
唉,把大量时间花在组织提问上了,希望大家引以为戒。有时候,更该去清洗一下思路,重新着手 -
Duplicate from active database failed
I have built two RAC nodes as primary and two RAC nodes as standby. Both database versions are 1120301 and linux servers are REDHAT 5.
I followed oracle MAA rapid deployment of 11gr2 dataguard whitepaper and started rman duplicate last night.I followed this link each step, and it seems did not say cluster_database need to be false?
http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-rac-standby-133152.pdf
Yes, even it is not saying it should TRUE not it should be FALSE.
But i saw another MAA document on RAC primary & RAC standby from below link, we can put that parameter.
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimaryracphysicalsta-131940.pdf
In this link, even it mentioned Standby parameters also, So you can change accordingly.
Thats why i asked you to please do refer alert log file and post if any errors, i doubt on unexpected error is there any failure from other resources? If you post that would be helpful
Again coming to errors,
ORA-03114: not connected to ORACLESo instance is crashed ?
ORA-03113: end-of-file on communication channelWhen remote instance is unable to communicate.
Also check any firewalls been set?
Is there parameter SQLNET.EXPIRE_TIME been set?
I can see three files are backed up, Later it got disconnected/crashed.
I guess there would be some issues with Network
or
SGA problems on standby?
These information you can get from Alert log file why it standby instance is crashed ?
Edited by: CKPT on Mar 2, 2012 10:45 PM -
Issue with Reset Password from Active Directory Integration Pack
I seem to be having some issues with a subscription in the Reset Password activity from the Active Directory Integration Pack. The "User Password" field refuses to take a value from a subscription provided earlier in a Generate Random
Text activity. As you will see in the screenshot below, when the Reset Password activity runs, the User Password value is blank.
Any idea why this might be happening? It looks like a possible bug with the Active Directory Integration Pack.Hi John,
I think this is not a bug, this should be by design because the password is a secure string. If you look for the Published data for Reset User Password activity at
http://technet.microsoft.com/en-us/library/hh553463.aspx it is not listed there as well.
If you need the the string (e.g. to send it via email) use the
data from the "Generate Random Text" Activity.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
Rman duplicate on Active dataguard physical standby
In DR site. i have to clone the database from pshysical standby database and clone db will be normal db not standby. Is it possible to do rman duplicate from active dataguard? will it support the duplicate database from active database or i have to take the rman backup of standby database and duplicate from backup piece. please advise
Please check below link
http://odenysenko.wordpress.com/2012/03/26/rman-duplicate-from-active-database-from-standby-ends-with-ora-01671/
Hope this answers all your questions,
Regards,
http://www.oracleracexpert.com
ORA-01031: insufficient privileges
http://www.oracleracexpert.com/2013/02/ora-01031-insufficient-privileges.html
Error while loading shared libraries: libdb.so.2 - After Migrating REHL4 to REHL5
http://www.oracleracexpert.com/2013/01/error-while-loading-shared-libraries.html -
How reliable is DUPLICATE .. FROM ACTIVE DATABASE ?
Version : 11.2.0.3
Platform : OEL 6
DUPLICATE .. FOR STANDBY FROM ACTIVE DATABASE doesn't involve taking any RMAN Backup files. Right? Just transferring data across the network.
Given that I have a good network throughput, how reliable it is to use this feature to create a standby from a 2 TeraByte Primary ? The standby DB will be created in our Data Center located 50KM away from the Primary Site.Kavanagh wrote:
Version : 11.2.0.3
Platform : OEL 6
DUPLICATE .. FOR STANDBY FROM ACTIVE DATABASE doesn't involve taking any RMAN Backup files. Right? Just transferring data across the network.
Given that I have a good network throughput, how reliable it is to use this feature to create a standby from a 2 TeraByte Primary ? The standby DB will be created in our Data Center located 50KM away from the Primary Site.2TB is not a small database to perform Duplicate from ACTIVE Database, Yes as you said there is no more need of backups from 11g if you use ACTIVE database.
Do not consider of the distance, Consider the bandwidth speed between two sites and how fast data can transfer and how stable it is.
You can test the network speed by transferring any one of the big file using SCP also, On top of that you can estimate how much time it can complete and ensure there is no network glitches/interruptions to avoid failure duplicate. -
RMAN 11gR2 DUPLICATE TARGET FOR STANDBY FROM ACTIVE DATABASE - Issue -HELP
First question.
Can primary and standby database have the same SID name?
As I recall it is yes.
I believe they must have different GLOBAL or DB_UNIQUE_NAME?
Anyway, RMAN I believe is telling me it is having problems copying control file on first and dies.
Permissions Issue on STANDBY machine?
RMAN> connect target backup_admin/backup_admin
connected to target database: LABDG (DBID=1973403623)
RMAN> connect auxiliary sys/oracle@STANDBY;
connected to auxiliary database: LABDG (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE;
Starting Duplicate Db at 18-JUL-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=10 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' auxiliar
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' ;
executing Memory Script
Starting backup at 18-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=151 device type=DISK
Finished backup at 18-JUL-11
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/oradat
restore clone controlfile to '/u01/app/oracle/flash_recovery_area/LABDG/cont
'/u01/oradata/LABDG/control01.ctl';
executing Memory Script
Starting backup at 18-JUL-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying standby control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/18/2011 11:20:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/18/2011 11:20:
ORA-17628: Oracle error 19505 returned by remote Oracle serverHi,
Permissions Issue on STANDBY machine?First problem I see is the sysdba password must be the same on both sides (target and auxiliary dbs).
From the documentation.
The source database and auxiliary instances must use the same SYSDBA password, which means that both instances must have password files. You can
create the password file with a single password so you can start the auxiliary instance and enable the source database to connect to it.Check all prereqs for the standby db duplicate here.
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Rgds,
Tycho -
Issue in configuring Standby Database from Active database in 11g by RMAN
POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PMHello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
Maybe you are looking for
-
MacBook Pro(Early 2011) extremely slow speed on Yosemite(10.10.2)
Hi All, I installed and then reinstalled a fresh Yosemite But now i am experiencing issues like very slow speed of the OS & fan continuously ON. Mavericks was working fine. this is my ertecheck report EtreCheck version: 2.1.8 (121) Report generated 1
-
How to clear invoices with different house banks
Hi, i have posted 3 invoices to one vendor now i want to clear 2 invoices from one house bank ( citi bank) and 1 invoice from another house bbank (abn amro ) how can i make settings in fbzp ? thanks inadvance for ur answer points wil b assigned Regar
-
I forgot my lettered password and just cant remeber! what shall I do?
I just cant remeber my password from my iPod Touch! What can I do?!
-
Switch between windows in quicktime using keyboard?
hey all, i know i used to be able to do this in some previous version of quicktime, but i cannot figure out how to do it now: how can i switch between different windows in quicktime with the keyboard?? if i have 3 different videos open, is there no w
-
Hello everyone, I am attempting to use the Callback feature for ApEx. I have tried to use a provided Oracle sample to just print a simple "Hello World" type of process using AJAX Callback. It appears that my code does not execute at all so I am not s