Issue with Session ID during POST

Hi All,
I am using Weblogic server version weblogic 9.2 and facing an issue with the session ID.
I have a client side script with numerous GET calls and one POST call that it makes in a single session. Frequently I come across with issue that the session ID that I send in POST request is not the same as received and this affects my subsequent GET calls not to be in the same session. The call order is like this
GETij/POSTij where i is the sent and j is the recieved session IDs.
[GET11, GET11, GET11, POST12, GET11, GET11, <after few secs interval> GET22, GET22]
I store the session id in a cookie. And I always create a session using the HttpServletRequest.getSession();
Can some one advice on this.
Thanks
Shankar

Hi,
Again as a follow-up, I am using net scape ns plugin for load balancing (iPlanet/Weblogic). The issue happens when the primary server id and the secondary server id are same in the session id (set in the cookie) when the cookie is sent and received, where session id is of the default format <session id>!<primary server id>!<secondary server id>
Any clue?

Similar Messages

  • Issue with Proximity Sensor during calls - Continued v2

    This thread is a continuation of Issue with Proximity Sensor during calls - Continued. which was getting too long and causing some browsers to time out. That thread has been locked and the last post links to this thread.
    See also the initial thread Issue with Proximity Sensor during calls
    Thank you.
    Apple Discussions Hosts

    rbrylawski wrote:
    Goflying wrote:
    mbassoc2003 wrote:
    I wish that were so. Then they would probably be taking prompter action. But the return rate three weeks in was substantially lower than most handsets at launch and only a quarter that of the 3GS. I suspect the return rate has remained incredibly low and the figures are further slewed down the way by the worldwide distribution that is now in the tens of millions.
    At 5% return rate on a product I understand that becomes a 'significant event' that becomes declarable to shareholders, so we know they haven't reached that milestone yet.
    a disclosable event is not triggered by a specific stock return level unless apple has entered into covenants re same. Suggest you take a look at sec rules for more info
    Still, unless you have insider knowledge, you don't know Apple's buying them back at record numbers. You may be guessing, but you likely don't have proof....
    agree. I don't have any proof whatsoever, just a strong gut feeling that all is very much not as rosy in cupertino as it might seem.
    For a company whose culture is steeped in phreakery, apple is showing an amazing inability to exert control.
    too many screw ups, too many loose ends, too many whacky hires, too many media backlashes - maybe the senior staff went into dumb-mode while steve was away for so long
    null

  • Issue with Proximity Sensor during calls - Continued.

    This thread is a continuation of Issue with Proximity Sensor during calls which was getting too long and causing some browsers to time out. The old thread has been locked and the last post links to this thread.
    Thank you.
    Apple Discussions Hosts

    I find it completely ludicrous that Apple can interject on this thread and say it's received too many posts and has to be shut down and a "new" thread started. Really now? Seriously? Couldn't they also simply pop in and post 'hi guys, we hear you and are working on it' ...or something to that effect? That's my main complaint really is the deafening silence. What they're basically telling us is to complain all we want, if we don't like the phone then return it for a refund ...that is if you still have your original defective phone, for all you that already swapped phones, you're beat and are stuck with our mistake for the next 2 years when you'll be upgrade eligible again. ...WOW, thanks for the statement without technically releasing one. ...I think we're all left in the dark because Apple really doesn't know what is going on with the sensor, they can't and or won't release a statement without getting the facts straight. ...but we all know one fact is straight...the sensor is dysfunctional and that alone deserves an acknowledgement. How are we to have faith in Apple to fix the issue when we're left to believe they don't think there is one.
    ...btw update on "my fix" ...deleting all your photos and putting the phone in your arm pit and then under your pillow is only a temporary solution, for mine sensor is on the fritz again. ...shaking my head, if only this were
    funny.

  • Who else is having MAJOR issues with their Droid DNA post 4.4 (KitKat) update??

    I usually don't complain or post much about my phone because problems are generally quickly fixed, but this update is just ridiculous. After updating to KitKat, my phone has the following problems:
    1. Text Messages - I constantly get text message errors. Always get the error that my message is not able to be sent. I have two problems with this. First, I get the error that the message was not able to be sent, but the recipient tells me they get mass spammed the same message 3+ times. Second, sometimes the recipient does not receive the message and it never goes through.
    2. Network connection - Since the update, my phone usually does NOT have any type of connection whatsoever. The status bar shows I have 3G or 4G, but when I go to the internet app or try to use any form of data, I get the No data connection/no network connection error. Also, many times I am unable to receive/place calls.
    2. Battery Life - significantly reduced battery life. This is not too big a deal because I'm assuming the new Android version takes more battery power. I can stomach this.
    Please assist me with this as soon as possible. I'd hate to have to drop Verizon for such a silly issue.

        I'm sorrry to hear you're having so many issues with your Droid DNA after your update pl124. I can understand the frustrations you're experiencing but we are here to help. Have you performed any trouble shooting steps with us regarding the issues you're having? Although I'm unable to fix any of the functionality changes caused by the update, I can help with the issues. Are you using a 3rd party messaging app? If so, its always a good idea to temporarily remove it to see if its causing an issue. We also recommend safe mode, which disables all apps and allows you the opportunity to readd them one at a time to see if that particular one is causing an issue. Here are the steps http://vz.to/1g3i9mj .
    Additionally, if you're having issues with missed calls and text, we also recommend a SIM card pull to reconnect your phone back to the towers. Just like rebooting a computer down completely and back up. Where are you located (zipcode)? Are issues with calls and text occuring inside or outside our home? There may be an issue in the area. Here are the steps to safe mode http://vz.to/1hRNOb1 .
    The great thing is you always have the chance to download apps from the app store to help with personalization for your ringtones, wallpapers, graphics, and minor functionalities. I know its upsetting to have so many changes after personalizing your phone but we hope the software gave you some benefits. If you continue to have problems, a hard reset is the last step that can usually correct minor issues but will also require a complete reset back to factory settings. Keep us posted and let us know if the phone gets better with some of the steps above. We want you to love your phone again and only change devices because you are ready for the latest and greatest and not because of issues.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • Issue with session management with portal 701 AFP

    Hi portal experts,
    We are facing an issue with one of our portal 7 ehp1 running the AJAX framework pages.
    When logging off, the DSM popup is shown and it disappears. However, the backend sessions are kept alive when we look in transaction SM12, which indicates that the backend session has not been closed (proven in transaction SM04)
    The same issue arises when closing a popup window. In this case, no DSM popup is shown and the sessions are maintained as well.
    Popup blockers are disabled
    Portal url and backend url are in the trusted sites collection
    Does this have something to do with the AJAX framework?
    Does anyone have any pointers for us?
    Thanks in advance!
    Regards,
    Luk

    Hi Tom,
    I already came across this note earlier. Currently I'm unable (not allowed) to install the httpwatch utility.
    To add to the complexity, web dispatchers are used to access the portal and used between the portal and the backend systems. If I understood correctly, we need to have the ABAP Security Sessions Enabled setting turned on in this sort of landscape. Is this correct?
    If it is not required, couldn't we just turn off this setting?
    Thanks in advance!
    kr,
    Luk

  • Known Issues with Session Vars and non-IE browsers?

    Are there any known issues with non-Internet Explorer
    browsers storing or reading session variables. Or loops and
    ListGetAt functions? I'm using CF 5.
    The code works fine in IE, but not in FireFox or Netscape.
    Thanks,
    Josh

    This testing will not really address any cross domain issues, due to the content being hosted by ScormCloud.
    What I found interesting, is that in ScormCloud, using the links below, my results were opposite those that I obtained through my LMS.
    In LMS, Captivate 5 worked, Captivate 6 did not in IE8, both worked in FF
    In ScormCloud, Captivate 5 did not work in IE8, but worked in FF, and Captivate 6 did work in FF and IE8.
    Here are the links:
    captivate 5 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=3c04f298-d0db-4d10-ab6 3-80b9aaf2890b
    captivate 6 http://cloud.scorm.com/sc/InvitationConfirmEmail?publicInvitationId=e2b05753-2f03-421a-87d 9-62b92ad199af
    Thanks for your attention, every bit of information that I can get will help.
    Thanks,
    SL

  • Problem with P45 Platinum during POST

    Good day! 
    I have MSI P45 Platinum mainboard and from to time to time it freezes during POST with AMI bios POST code - 423C. This happens right after the message that "4096MB OK" and before the detection of SATA/IDE drives.  When this happens, the only way to make the system run is to turn off the power (pressing Ctrl-Alt-Del of Reset would result in the same error)  - after that the POST procedure finishes correctly and I don't experience any problems afterwards (system is rock-solid after POST completion).
    So my question is - can anyone explain me what does this post code mean (D-Leds are not much of a help)? Is this a mobo problem or may be there is some kind of incompatibility with my hardware. I should mention also that I've tried all versions of Bios both official and beta without any success.
    This problem does not trouble me that much (doesn't happen often), but still I would like to understand what may cause it.
    P.S. My system config - iC2D E8300/MSI P45 Platinum/4x1Gb DDR2-800 Geil Black Dragon (5-5-5-15)/MSI Radeon 4870 1Gb OC edition/HDD 250 Gb WD + 120Gb Seagate/SB Audigy 4/DVD-RW Asus 1814/PSU TT Toughpower 700w (w0105)
    Thanx in advance and please excuse my poor English   

    Thank you for the reply! 
    Quote from: Jack the Newbie on 16-December-08, 06:39:42
    What is your current BIOS Version?
    I've recently flashed the latest beta bios version - 1,5 beta 6... but it produces the same error as did the latest official bios v1.4 
    Quote from: Jack the Newbie
    Does the same problem occur with only one memory module installed?
    I don't know actually. But thanks for pointing this out  - I will test the system with one (and then with two) module(s). I've tested the modules with the memtest86+ software (the latest version, which supports P45 chipset) several times and it showed no errors. So the modules are OK and they worked without any problems with my previous mb (Gigabyte P35-DS3).
    Quote from: Jack the Newbie
    What do the POST-Status LEDs of the board tell you, when the system freezes at the described stage?
    Well, I guess I don't fully understand what does the combination of LEDs tell during the freeze. I'll try to describe the combination -
    LED12 - OFF           LED13 - GREEN
    LED8 - RED             LED7 - OFF
    LED14 - OFF           LED10 - GREEN
    LED15 - RED           LED11 - OFF
    In mobo's manual this diagnostic LEDs are grouped in 4 groups and the description of the group that most closely resembles my case is - "Testing base and Extended memory etc." But I'm not sure that I'm identifying the problem correctly, because of the LEDs that are OFF.
    Quote from: Jack the Newbie
    Are you experiencing any freeze and/or stability problems appart from the described problem?
    No, as I said in my initial post, once it get past this stage everything is running smoothly - OS boots and all software, including the most demanding games or tests, are running OK.

  • SUM issue with XSS components during maintenance on NDWI controlled landscape

    Hello,
    This is our first time using SUM/MOpz for a release upgrade procedure as the last JSPM update disabled the launch program.
    During our test upgrade of our Enterprise Portal HUB landscape (source NW 7.02 -> target NW 7.4) with EHP5 for ERP 6.0 - XSS Self Services for backend ERP system installed. I've encountered an issue with SUM in the Configuration stage - Target Release Components screen. the only 5 objects SUM cannot handle automatically are the XSS Self Services target release components:
    SAPPCUI_GP         633
    SAP_ESS               633
    SAP_ESS_LGP     633
    SAP_MSS               630
    UTXSSLGP             633
    The only option I have is to scan inbox to rebuild the component list. I'm assuming, since these components are being modified by us and delivered/deployed thru NWDI track, their source location on the system is now the track name instead of the SAP delivered MAIN_ERP53VAL_C. Which means that SUM is expecting updated modified SCAs from NWDI for new 633 versions in the download directory before proceeding to next phase. However, in NWDI landscape configurator for this track, I have checked the option to mark system in NWDI control and verified SUM recognizes the system as NWDI controlled.
    I'm struggling to understand the where the disconnect is between SUM and NWDI for theses components as I thought that SUM is supposed to ignore the DEV NWDI developed and wait for updates modified SCAs only in QA and PROD. Does anyone else have experience with this process to help me?
    Regards,
    Paul

    Hi Paul,
    We are facing the same issue although we can see in the process Overview of SUM that the system is not ticked as under NWDI Control.
    But we are facing problem only for SAP ESS and SAP MSS not other components. Other three components are coming up fine and ready for deployment. This is due to the issue that only these components are identified in the BUILD COMPONENT LIST UPGRADE step as modified.
    Detailed checking of the logs led us to errors identical to the KBA 2034886 - Error: Dialog eliminator ConfirmComponentsDialogEliminator does not allow to omit dialog ConfirmComponents
    The system should get picked as under NWDI control and following all steps of the upgrade for NWDI driven system landscapes
    Thanks and Regards,
    Karan Shah
    Message was edited by: Karan Shah

  • Weird Issue with session collection creation

    Hello everybody,
    While building a fully redundant RDS infrastrcutre I cam across this issue
    While creating the session collection through Server Management on Windows Server 2012 R2 I get the following error:
    "Unable to configure the RD Session Host server - Invalid Operation".
    Here is a detailed spec of the environment:
    - 2 RDS brokers connected in HA mode to a Cluestered SQL Instance
    - 2 RDS license servers that are correctly configured on the session hosts
    - 3 RDS Session Hosts
    All are Windows Server 2012 R2
    I have checked the Event logs also and everything I do not see any issues, the session hosts have correct communication between one another and to the license and rd  broker servers.
    At this point I am really lost.
    Anybody have any ideeas about such a ambiguous error?
    Thank you!
    Above and Beyond Information Technology

    Hi,
    Thank you for sharing your experience here. It will be very beneficial for other community members who have similar questions. 
    Regards.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Issue with Proximity Sensor during calls

    I'm having an issue with the Proximity Sensor not properly detecting when i'm holding my phone to my ear. I can confirm that the iPhone sensor is working by covering it with my finger, but when held to my face, the screen blinks as if it cannot decide to disable the screen or enable it. It results on me hanging up, putting calls on mute, and dialing numbers accidentally while i'm on the phone. This occurs on 90% of my calls. Is anyone else experiencing this issue. I would like to confirm whether this is a software issue (Proximity Sensor sensitivity too low) or a design issue (sensor now placed towards the end of the phone).
    Macbook Pro, Mac OS X (10.6.4)

    Hi there bobby adapa,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Screen won't lock or go black when answering calls
    Verify mute or speaker have not been activated, just prior to placing your ear over the receiver.
    While on a call hold your hand over the top third of the display, and verify that the screen is locked or goes to sleep.
    Try turning iPhone off and then on again.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W. 

  • Issue with reinstallation of WSUS, Post install config fails

    Hi
    I am trying to reinstall WSUS role. Steps followed
    1. Uninstallation of WSUS role and windows internal database, restarted the machine
    2. Delete the Data file from Windows\WID folder
    3. Deleted the update service registry form registries
    4. Deleted WSUS administration site for IIS.
    5. Deleted the  files from Program files\update services.( Retained WSUSutil in sub folder tools as this was not coming up with installation).
    6. Restarted the machine.
    7. Installed WSUS - Successful.
    8. Tried to run the post install configuration from console.. It errored out.
    9. Executed the command "wsusutil postinstall CONTENT_DIR=<<Folder path on WSUS server>>
    10. It erred out and the content of the error log is as below.
    2015-02-03 23:06:07  Starting service W3SVC
    2015-02-03 23:06:07  Configuring IIS...
    2015-02-03 23:06:07  Start: ConfigureWebsite
    2015-02-03 23:06:07  Configuring website on port 8530
    2015-02-03 23:06:08  System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
       at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
       at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.Run()
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    Any pointers on how to resolve this issue would be of great help. I can not uninstall IIS on this server as this is acting as only distribution point for my SCCM Setup.
    Regards
    Leela

    Hi ,
    Refer to below steps for clean uninstallation of WSUS.
    Workaround 1: To uninstall WSUS roles and features using Windows PowerShell
    In PowerShell, review features installed by calling: Get-WindowsFeature UpdateServices*
    To remove features, call: Uninstall-WindowsFeature <featureName>
    Workaround 2: To uninstall WSUS roles and features using the Server Manager Console
    In Server Manager, launch Remove Roles and Features Wizard (RRW), unselect items to be uninstalled, and complete the Wizard:
    In Server Roles tab unselect ‘Windows Server Update Services’ option
    In Features tab unselect ‘Remote Server Administration Tools -> Role Administration Tools -> Windows Server Update Services Tools’ option
    We recommend restarting the server to ensure that all WSUS components are removed. After uninstalling WSUS roles and features, you may reinstall the WSUS roles and features
    And try to reinstall. It worked for me.
    Regards,
    Arjun

  • Issue with session variable

    Hi,
    I'm trying to setup a session variable to filter an Answer query based on the user login name. I've created the following
    - A database table that contains a user name and its related filter (Entity)
    - An initialization block for the session variable to issue the following sql: select Entity from table where user_name = ':USER'
    - Created a target session variable called CURR_ENTITY as the target and assign a default value as 'No entity'.
    - Filter my Answer query to use the session variable CURR_ENTITY
    After restart of BI server and Presentation services and opening the report, CURR_ENTITY is always set to the default value. I've checked NQQuery,.log and looks like the initialization block was not returning any rows.
    Any ideas on how to get around this issue? Thanks.
    Regards,
    Gerd

    Hi gerd,
    select Entity from table where user_name = ':USER'Check if this query is returning values in the backend DB.If so it is returning then it should work fine in session variable.
    After defining the target variable CURR_ENTITY and test it in the screen.That shows you is it picking all the values or a single defaulted value.
    If its showing all values then re-check your block once again.
    (OR)
    In the target variable instead of variable define row-wise initialization (i mean check it) and change the SQL in the variable to this
    select 'CURR_ENTITY',Entity from table where user_name = ':USER'
    and test it so you can use it in answers .....it should work with what is required.
    hope answered the question.
    Cheers,
    KK

  • ViewExpiredException issue with session invalidate on IE9

    Hi guys,
    I have posted this on the ADF forum as well as I'm not sure of the root cause is JHeadstart related or not - but I thought I would check also here to see if anyone else has encountered this ...
    I'm using JDeveloper 11.1.1.6 (JHeadstart 11.1.1.4.26) and having problems when calling "session.invalidate();" with my custom JhsAuthenticationFilter. If i log on and immediately log out (so no web.xml timeout which is set to 25 min) - The message shown on screen is
    "Because of inactivity, your session is timed out and is no longer active. Click on OK to reload the page"
    In the log files, the following error is thrown
    <BindingContext> <put> [3126] Replacing: null with: XXXXX_UIShellPageDef
    <StateManagerImpl> <restoreView> Could not find saved view state for token -a6jozll3a
    <LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RESTORE_VIEW 1
    javax.faces.application.ViewExpiredException: viewId:/pages/UIShell.jspx - ADF_FACES-30107:The view state of the page has expired.  Reload the page.
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:751)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:374)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at hmdclinical.pulse.view.PulseAuthenticationFilter.doFilter(PulseAuthenticationFilter.java:273)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    <ADFLogger> <addContextData> Execute queryI have the web.xml parameter org.apache.myfaces.trinidad.CLIENT_STATE_MAX_TOKENS set to 15.
    This ONLY happens when using IE9 - using Firefox or Chrome it's not a problem. I'm guessing something is trying to access the page def after the token for the view has already been removed as part of the session.invalidate() ?
    How can I find out what the root cause is and why is this only a problem with IE and not Chrome or Firefox ?
    Any help greatly appreciated !!
    Cheers,
    Brent

    Brent,
    I think it is best to make a very simple testcase without JHeadstart (you can cust and paste code from the jhs auth fillter as needed) and then attach your testcase to the post on JDev forum, or copntact Oracle support.
    Looks like a browser-specific ADF bug to me.
    Steven Davelaar,
    JHeadstart Team.

  • Issue with Foreighn trade during billing

    Hi All,
    We have an issue related to Foreign trade during billing.
    The system is not throwing any error message even though the foreign trade data is not filled.
    We have maintained the incompleteness schemas and incompleteness procedures and other relevant settings for foreign trade but the system is not stopping the user from saving the billing document.
    Please let us know what needs to be done so that filling the Foreign trade becomes mandatory.
    Regards,
    Teja

    Dear Teja
    Go to OVE6, select the origin country and there you can see various "Procedures" listed out with two boxes "Export" and "Import".   Maintain "E"  under the tab Export against any Procedure and save.
    Now go to OVE7, select the origin country and there assign the above procedure to the combination of sales area, Exp/Imp Group and item category.
    thanks
    G. Lakshmipathi

  • A simple app to secure coldfusion pages - Running into an issue with Session

    Hello, I am testing out how to protect pages in coldfusion and have run into an issue when attempting to create a process by which users can log out.
    Essentially, I have three pages:
    Page A - The form that submits to Page B
    Page B - That checks the form.username and form.password against a database (works fine)
    Page C - Logout page (Which is where I am having an issue).
    Page C throws a "variable Session is undefined" error
    Here is the code on Page C:
    <cfset StructClear(Session)>
    <cflocation url="index.cfm">
    Here is the code on Page B:
    <cfif NOT IsDefined ("form.username")>
    <cflocation url="index.cfm" addtoken="No">
    </cfif>
    <cfquery name="test" datasource="cfdb">
    SELECT * FROM USERS
    WHERE USERNAME = '#FORM.username#'
    AND PASSWORD = '#FORM.password#'
    </cfquery>
    <!---<CFSET Session.LoggedIn = "1">
    <CFSET Session.FirstName = "#test.FirstName#">--->
    <CFIF test.RecordCount IS 0>
    <cflocation url="index.cfm" addtoken="No">
    <CFSET StructClear(Session)>
    <cfelse>
    <CFSET Session.LoggedIn = "1">
    <!---<cflocation url="test.cfm" addtoken="No">--->
    </cfif>
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    </head>
    <body>
    <p><a href="logout.cfm">Log Out</a></p>
    <p> </p>
    <p> </p>
    <p><br>
      This content is protected.
    </p>
    </body>
    </html>
    As you can see, nothing fancy
    Now, I thought that the Session variable could be accessed by any page within a given browser instance, but I am obviously wrong.
    What do I need to do for Page C (my logout page to be able to access the session variable).
    Any guidance is greatly appreciated!

    1.
    “Variable Session is undefined” error comes up when you try to manipulate a session variable which does not exist, as at that point in time. To take care of possible empty session structures, it is good practice to check first if your session is defined.
    So you will have something like:
    <cfif isDefined("session")>
    <cfset StructClear(Session) />
    <cfelse>
    <cflocation url="index.cfm">
    </cfif>
    2.
    To enable you access your session variables from any page in your application, you need to enable session management in your Application.cfm or Application.cfc.
    cfm   <cfapplication sessionmanagement="Yes" />
    cfc        <cfcomponent>
    <cfset THIS.SessionManagement = "Yes" />
    </cfcomponent>
    Reference…http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -7c48.html

Maybe you are looking for

  • How can i see how many song i have in my iTunes library

    i have just downloaded the new software update for itunes and i cant see how many songs i have in my library. is there a way i can check that or put that back on?

  • Multiple constraining classifiers in generic templates - compiler broken

    can not compile multiple constraining classifiers to a generic template if the classifier is defined in the template:      public <U, T extends U> void a() {} will compile. java language specification: 4.4 Type Variables says:      public <T extends

  • What is the difference between pause and save in Hyper-V?

    hi, What is the difference between pause and save in Hyper-V? What are the benefits of using each function? Thanks

  • How to access HBM Business rules

    Hello: I was a HFM user and just being granted "developer access". I wonder where I can see the VB script code of the consolidation business rules. From the HFM workspace, I did Start ==> Administrator ==> Calculation Manager, can not see anything. W

  • Import Sort

    Hi, After shooting RAW+Jpeg, is there a way to sort the images by file type in the LR4 import window?  This way I can import just he RAW or just the Jpeg files without having to click on each file to check it?  Thanks, Mike