Issue with SLA reports of Exchange 2010 MP in SCOM 2007 R2 !!

Hi,
I have issues with Exchange 2010 MP SLA reporting. Whenever report is run it fails on some or the other dataset(Outage**,SLAbyDAte etc.) When I digged in, I found that it is connecting to DW Exchange 2010 Availability tables + Planned maintainance +
outage table. The tables were not available in the DW, not sure how it got removed. Initially I tried by uninstalling and installing MP(Exchange 2010 & Exchange 2010 reports both) if relevant tables get created automatically but it did
not help and I was still facing the same issue. Then I tried to create the tables manually and check if it could resolve the issue. There was unique ID associated(different in different computer) with the name of most of the tables. I tool it from Exchange
report data source which exists in reporting server. But I could see that table remain empty with no records there and SLA report start giving different issues stating table instances do not exist.
Could anyone help me to restore the SLA report of Exchange 2010 MP ? How should I ensure that data start populating the tables ? I am also helpless here because we do not have correct DW dump to restore back to earlier when it was working fine.
//BR

Hi,
Based on my research, to correctly install the Correlation Engine, consider the following when you install the Exchange 2010 Monitoring Management Pack:
Determine which server will host the Correlation Engine. While not strictly required, it's strongly recommended that the Correlation Engine be installed on the Root Management Server computer.
Make sure that you download and install the Exchange 2010 Management Pack that matches the operating system for the selected server. You can install the 32-bit or 64-bit version.
Make sure that you run the Microsoft Installer (.msi) package on the server where you want the Exchange 2010 Management Pack and the Correlation Engine to be installed.
After the installation is complete, the Correlation Engine service will have been installed on the server, and the Management Pack files will have been copied to the
System Center Management Packs folder. By default, the installation directory is C:\Program Files\System Center Management Pack.
Quote from:
http://technet.microsoft.com/en-us/library/ee758051(v=exchg.140).aspx
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
Regads,
Yan Li
Regards, Yan Li

Similar Messages

Issue sending bulk email after Exchange 2010 to 2013 migration

Hi!
I have an issue with some reporting software sending bulk emails after our Exchange 2013 migration.
I can see the connections in the firewall and I can see the first connections under the protocol logs in the Exchange servers. What happens is that after ~10 emails, within the same amount of seconds from what I can tell, the mail flow just stops to the
Exchange server. I cant seem to find an error message anywhere within the Exchange logs and I've tried updating the receive connector with higher timeouts / Connection limits but the users still cant send all the invoices etc right away.
We have multiple applications / receive connectors with this issue and the users did not report any issues with Exchange 2010 so I am assuming that this issue did not exist there.
We're running two multi-role (CAS/MB) Exchange 2013 servers in a DAG. Exchange 2010 is not fully decommissioned yet but all links and users are moved to 2013.
Any help is much appreciated!

Hi ,
To avoid the issues when relaying the emails from application server through exchange then we need concentrate on the below mentioned parameters on the receive connectors in exchange 2013 cas servers and also we need to set the parameter value as per your
environment requirement.
Please check the below mentioned values on the dedicated receive connectors in exchange 2013 cas server to relay emails from the application server
Parameters :
ConnectionInactivityTimeout
ConnectionTimeout
MaxInboundConnection
MaxInboundConnectionPercentagePerSource
MaxInboundConnectionPerSource
MaxRecipientsPerMessage
MessageRateLimit
Note : In case if none of the above changes help you then the final option would be to enable the protocol logging on the receive connector utilized by the application server to relay emails via exchange server and with the help of the logs we can can came
to know that why the connections from the application server to exchange server is disconnecting after some emails has send.
Thanks & Regards S.Nithyanandham
Here are the relevant values for the receive connector, doublechecked and it's the same on both DAG members;
ConnectionTimeout : 00:20:00
ConnectionInactivityTimeout : 00:05:00
MaxInboundConnection : 5000
MaxInboundConnectionPerSource : Unlimited
MaxInboundConnectionPercentagePerSource : 100
MaxRecipientsPerMessage : 200
MessageRateLimit
: Unlimited
Adding logs for one big connection spike from the customer. About 50 inbound connections to the Exchange servers .
SMTP Receive;
2015-01-26T18:02:46.991Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,0,DAG member 01:587,Customer IP:60262,+,,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,1,DAG member 01:587,Customer IP:60262,*,SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders,Set Session Permissions
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,2,DAG member 01:587,Customer IP:60262,>,"220 DAG member 01 Microsoft ESMTP MAIL Service ready at Mon, 26 Jan 2015 19:02:46 +0100",
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,3,DAG member 01:587,Customer IP:60262,<,EHLO customerdomain.com,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,4,DAG member 01:587,Customer IP:60262,>,250-DAG member 01 Hello [Customer IP],
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,5,DAG member 01:587,Customer IP:60262,>,250-SIZE 36700160,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,6,DAG member 01:587,Customer IP:60262,>,250-PIPELINING,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,7,DAG member 01:587,Customer IP:60262,>,250-DSN,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,8,DAG member 01:587,Customer IP:60262,>,250-ENHANCEDSTATUSCODES,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,9,DAG member 01:587,Customer IP:60262,>,250-STARTTLS,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,10,DAG member 01:587,Customer IP:60262,>,250-AUTH LOGIN,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,11,DAG member 01:587,Customer IP:60262,>,250-8BITMIME,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,12,DAG member 01:587,Customer IP:60262,>,250-BINARYMIME,
2015-01-26T18:02:47.006Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,13,DAG member 01:587,Customer IP:60262,>,250 CHUNKING,
2015-01-26T18:02:47.022Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,14,DAG member 01:587,Customer IP:60262,<,STARTTLS,
2015-01-26T18:02:47.022Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,15,DAG member 01:587,Customer IP:60262,>,220 2.0.0 SMTP server ready,
2015-01-26T18:02:47.022Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,16,DAG member 01:587,Customer IP:60262,*,,Sending certificate
2015-01-26T18:02:47.022Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,17,DAG member 01:587,Customer IP:60262,*,CN=server,Certificate subject
2015-01-26T18:02:47.022Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,18,DAG member 01:587,Customer IP:60262,*,CN=server,Certificate issuer name
2015-01-26T18:02:47.022Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,21,DAG member 01:587,Customer IP:60262,*,server;DAG member 01,Certificate alternate names
2015-01-26T18:02:47.053Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,22,DAG member 01:587,Customer IP:60262,*,,TLS negotiation succeeded
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,23,DAG member 01:587,Customer IP:60262,<,EHLO customerdomain.com,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,24,DAG member 01:587,Customer IP:60262,*,,Client certificate chain validation status: 'EmptyCertificate'
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,25,DAG member 01:587,Customer IP:60262,*,,TlsDomainCapabilities='None'; Status='NoRemoteCertificate'
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,26,DAG member 01:587,Customer IP:60262,>,250-DAG member 01 Hello [Customer IP],
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,27,DAG member 01:587,Customer IP:60262,>,250-SIZE 36700160,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,28,DAG member 01:587,Customer IP:60262,>,250-PIPELINING,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,29,DAG member 01:587,Customer IP:60262,>,250-DSN,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,30,DAG member 01:587,Customer IP:60262,>,250-ENHANCEDSTATUSCODES,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,31,DAG member 01:587,Customer IP:60262,>,250-AUTH LOGIN,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,32,DAG member 01:587,Customer IP:60262,>,250-8BITMIME,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,33,DAG member 01:587,Customer IP:60262,>,250-BINARYMIME,
2015-01-26T18:02:47.069Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,34,DAG member 01:587,Customer IP:60262,>,250 CHUNKING,
2015-01-26T18:02:47.085Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,35,DAG member 01:587,Customer IP:60262,<,AUTH LOGIN,
2015-01-26T18:02:47.085Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,36,DAG member 01:587,Customer IP:60262,>,334 <authentication response>,
2015-01-26T18:02:47.100Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,37,DAG member 01:587,Customer IP:60262,>,334 <authentication response>,
2015-01-26T18:02:47.131Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,38,DAG member 01:587,Customer IP:60262,*,SMTPSubmit SMTPAcceptAnyRecCustomer IPient BypassAntiSpam AcceptRoutingHeaders,Set Session Permissions
2015-01-26T18:02:47.147Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,39,DAG member 01:587,Customer IP:60262,*,[email protected],authenticated
2015-01-26T18:02:47.272Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,40,DAG member 01:587,Customer IP:60262,*,,Proxy session was successfully set up. Session [email protected] will now be proxied
2015-01-26T18:02:47.272Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,41,DAG member 01:587,Customer IP:60262,>,235 2.7.0 Authentication successful,
2015-01-26T18:02:47.819Z,RECEIVE CONNECTOR,08D2051B7AE3DA8E,42,DAG member 01:587,Customer IP:60262,-,,Local
SMTP Send
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,0,,DAG member 02:465,*,,attempting to connect. Client proxy session for [email protected]
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,1,DAG member 01:57446,DAG member 02:465,+,,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,2,DAG member 01:57446,DAG member 02:465,<,"220 DAG member 02 Microsoft ESMTP MAIL Service ready at Mon, 26 Jan 2015 19:02:46 +0100",
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,3,DAG member 01:57446,DAG member 02:465,>,EHLO DAG member 01,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,4,DAG member 01:57446,DAG member 02:465,<,250-DAG member 02 Hello [DAG member 01],
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,5,DAG member 01:57446,DAG member 02:465,<,250-SIZE 36700160,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,6,DAG member 01:57446,DAG member 02:465,<,250-PIPELINING,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,7,DAG member 01:57446,DAG member 02:465,<,250-DSN,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,8,DAG member 01:57446,DAG member 02:465,<,250-ENHANCEDSTATUSCODES,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,9,DAG member 01:57446,DAG member 02:465,<,250-STARTTLS,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,10,DAG member 01:57446,DAG member 02:465,<,250-X-ANONYMOUSTLS,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,11,DAG member 01:57446,DAG member 02:465,<,250-AUTH GSSAPI NTLM,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,12,DAG member 01:57446,DAG member 02:465,<,250-X-EXPS GSSAPI NTLM,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,13,DAG member 01:57446,DAG member 02:465,<,250-8BITMIME,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,14,DAG member 01:57446,DAG member 02:465,<,250-BINARYMIME,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,15,DAG member 01:57446,DAG member 02:465,<,250-CHUNKING,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,16,DAG member 01:57446,DAG member 02:465,<,250-XEXCH50,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,17,DAG member 01:57446,DAG member 02:465,<,250-XRDST,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,18,DAG member 01:57446,DAG member 02:465,<,250 XSHADOWREQUEST,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,19,DAG member 01:57446,DAG member 02:465,>,X-ANONYMOUSTLS,
2015-01-26T18:02:47.163Z,Client Proxy Send Connector,08D2051B7AE3DA8F,20,DAG member 01:57446,DAG member 02:465,<,220 2.0.0 SMTP server ready,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,21,DAG member 01:57446,DAG member 02:465,*,,Received certificate
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,23,DAG member 01:57446,DAG member 02:465,*,,Proxy target certificate
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,24,DAG member 01:57446,DAG member 02:465,*,"CN=*.email.com, OU=IT, O=X, L=X, S=X, C=SE",Certificate subject
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,25,DAG member 01:57446,DAG member 02:465,*,"CN=DigiCert High Assurance CA-3, OU=www.digicert.com, O=DigiCert Inc, C=US",Certificate issuer name
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,28,DAG member 01:57446,DAG member 02:465,*,*.email.com;email.com,Certificate alternate names
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,29,DAG member 01:57446,DAG member 02:465,>,EHLO DAG member 01,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,30,DAG member 01:57446,DAG member 02:465,<,250-DAG member 02 Hello [DAG member 01],
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,31,DAG member 01:57446,DAG member 02:465,<,250-SIZE 36700160,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,32,DAG member 01:57446,DAG member 02:465,<,250-PIPELINING,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,33,DAG member 01:57446,DAG member 02:465,<,250-DSN,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,34,DAG member 01:57446,DAG member 02:465,<,250-ENHANCEDSTATUSCODES,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,35,DAG member 01:57446,DAG member 02:465,<,250-AUTH GSSAPI NTLM LOGIN,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,36,DAG member 01:57446,DAG member 02:465,<,250-X-EXPS EXCHANGEAUTH GSSAPI NTLM,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,37,DAG member 01:57446,DAG member 02:465,<,250-X-EXCHANGEAUTH SHA256,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,38,DAG member 01:57446,DAG member 02:465,<,250-8BITMIME,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,39,DAG member 01:57446,DAG member 02:465,<,250-BINARYMIME,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,40,DAG member 01:57446,DAG member 02:465,<,250-CHUNKING,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,41,DAG member 01:57446,DAG member 02:465,<,250-XEXCH50,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,42,DAG member 01:57446,DAG member 02:465,<,250-XRDST,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,43,DAG member 01:57446,DAG member 02:465,<,250-XSHADOWREQUEST,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,44,DAG member 01:57446,DAG member 02:465,<,250-XPROXY,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,45,DAG member 01:57446,DAG member 02:465,<,250-XPROXYFROM,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,46,DAG member 01:57446,DAG member 02:465,<,250-X-MESSAGECONTEXT ADRC-2.1.0.0 EPROP-1.2.0.0,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,47,DAG member 01:57446,DAG member 02:465,<,250 XSYSPROBE,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,48,DAG member 01:57446,DAG member 02:465,>,X-EXPS EXCHANGEAUTH SHA256 ,
2015-01-26T18:02:47.257Z,Client Proxy Send Connector,08D2051B7AE3DA8F,49,DAG member 01:57446,DAG member 02:465,>,<Binary Data>,
2015-01-26T18:02:47.272Z,Client Proxy Send Connector,08D2051B7AE3DA8F,50,DAG member 01:57446,DAG member 02:465,<,235 <authentication information>,
2015-01-26T18:02:47.272Z,Client Proxy Send Connector,08D2051B7AE3DA8F,51,DAG member 01:57446,DAG member 02:465,>,XPROXY SID=08D2051B7AE3DA8E IP=Customer IP PORT=60262 DOMAIN=customerdomain.com CAPABILITIES=0
2015-01-26T18:02:47.272Z,Client Proxy Send Connector,08D2051B7AE3DA8F,52,DAG member 01:57446,DAG member 02:465,<,250 XProxy accepted and authenticated,
2015-01-26T18:02:47.272Z,Client Proxy Send Connector,08D2051B7AE3DA8F,53,DAG member 01:57446,DAG member 02:465,*,,Proxy session successfully set up for [email protected]. Inbound session will now be blindly proxied
2015-01-26T18:02:47.819Z,Client Proxy Send Connector,08D2051B7AE3DA8F,54,DAG member 01:57446,DAG member 02:465,-,,Remote
Nothing after these logs indicating any type of issue with the receive connector. Tried to make the logs as anonymous as possible. Hope they still make sense.
Note; Database was active on DAG member 02 but all incoming traffic on port 587 was directed to DAG member 01.

Variable input values issue with Portal reports in WAD

Hi Gurus,
We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
Regards,
Yada

Hi Hari,
Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
Regards,
Yada

My macbook air cannot sync with my office microsoft exchange 2010 mail server

My macbook air cannot sync with my office microsoft exchange 2010 mail server.
It used to work perfectly, and then I lost connection and was never able to establish one. I re-istalled my e-mail account several times, no success.

I am sure all of you got your email issues sorted out by now but i was having trouble settings up exchange email on my Iphone 5S, and the problem i found was to go to settings, icloud, then log into icloud with your apple id first (before setting up the exchange email). Once i logged into my icloud account on my Phone 5S, the exchange server email starting working and synching right away.
to confirm this worked, i even deleted my email account and deleted my Icloud accounts both from my iphone was able to simulated the same exact problem (exchange server would not sync with my Iphone 5S) until i logged back into my Icloud account on my 5S.
Again once i logged into Icloud, the exchange server issues went completely away.
Just wanted to post this so anyone else having the issue could see.

Performance Issue with VL06O report

Hi,
We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
Thanks,
Surya

Sreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
     appending corresponding fields of table lt_select
     where     vbeln in ct_vbeln
     and     posnr eq posnr_initial
     and     parvw eq 'SP'
     and     lifnr in it_spdnr.
I don't see any issue with this query. I give more info later

Issues with BEx Reports in SAP Enterprise Portal

Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
Vikash

HI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash

User issue with a report supply planning area today monthly

this is a support issue....the user has an issue with a report supply planning area today monthly. The user is getting wrong values in BW, it sums PLOs and POs under production (config). for eg: BW says we are producing 46T while in R/3 we have 4T.

The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Issue with Scheduled Reports

Having an issue with running reports. We have created the folder under C:\Program Files\Cisco CRS Historical Reports\reports ..to resolve a bug but now the user gets the attached error message every morning. Any ideas?
Thanks,
Joe

Hi Joe
No attachment?
Aaron

Configure auto reply message with original email in exchange 2010

Dear All,
I have to configure Auto reply with original message in exchange 2010.
please help me to configure..
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi SKPATEL
Thank you for your question.
By my knowledge, we cannot meet your requirement, you can followed Ed's idea.
We just use out of office to reply all email without original email when the recipient is out of office.
You can refer to the following link to configure out of office:
http://technet.microsoft.com/en-us/library/aa997463(v=exchg.80).aspx
If there are any questions, please let me know.
Best Regard,
Jim

Can I update or fix the hardware issue with my iPad instead of a usb for my 2007 MacBook Pro

Can I update or fix the hardware issue with my iPad instead of a usb for my 2007 MacBook Pro

Have no idea what you are asking about. What hardware issue? What does a USB and a 2007 MacBook Pro have to do with it?
GB

Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated

Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated for that.
If this is not possible in SCOM. Is there another way we can do it via power shell or any thing.
Gautam.75801

Hi,
We may need to create script based rule using PowerShell or VBScript.
Please go through the below links for command get-mailboxstatistics:
Exchange 2010 : http://community.spiceworks.com/topic/122241-scripting-to-count-all-of-the-messages-in-a-mailbox
Regards, Yan Li

BPC NW SP5 with Windows 7 and Office 2010 - issues with EvDRE reports

Hi All,
We are facing a BPC front end issue with the following symptoms:
1. Any report with multiple EvDREs crashes out either instantly or within a few minutes of operation.
2. Two EvDRE reports (or one report and one input tempate) crashes same as above.
The crash is either an EvDRE error message or an endless wait for the server to respond (where we have to eventually terminate the application).
We were suggested to move to sp7 but the issues persisted.
We do have a message and SAP is helping us investigate. What I want to understand from everyone is are there customres successfully using this combination (BPC NW SP5 Windows 7 and Office 2010) along with the above features?
Customer is really loosing confidence in the solution and is eager to find out if we are the only one using this.
Regards
Anupam

Hi Zach,
While I do understand we need to isolate the problem but testing on different combinations, customer at the moment is not inclined for this and is looking for other customer references that this environment is stable.
Regards
Anupam

Issue with Staple option in Office 2010

We are having issue with printing with staple in Office 2010. We have Ricoh follow-me printing setup with 2 printer queue B&W and Colour. When select print in Word using Colour, we can
see the staples option.
But this option disappear if we use B&W queue.
We have checked printer driver and logged a job with Ricoh. Here is what we have from Ricoh. We are using Office 2010 14.0.6029.1
"Yes I can see below you have set it up correctly for both machines.
Seems to me that Office is not displaying that option which is unrelated to what driver you are using. Both the drivers are the PCL6 version and the finisher has the staple functions enabled
so in theory it should display the staple option for both print queues.
You will need to query Microsoft about this one because as far as I can see there is no fault with the way you have the Ricoh drivers installed or the machine itself. "
Any idea?
Cheers,

This is an issue between Ricoh and Microsoft. Ricoh should not be trying to shuffle it off to you. The support person is an idiot and you need to escalate it with Ricoh. Since all of the print settings are controlled by the print driver from Ricoh, if
this is really a Microsoft problem, the developers at Ricoh should acknowledge in writing that they have filed a bug report with Microsoft.
Kind Regards, Rich ... http://greatcirclelearning.com

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Avaya IP phone has an issue then downloading calendar from Exchange 2010

Hi all,
I'm having an issue, please give me an advice! When my IP phone (IP) works with Exchange 2010, it can not download calendar. I captured and saw that after client sends hello, server sends hello, server sends certificate, then client sends back bad
certificate and TCP Reset messages. I installed Exchange and AD on the same server. I also installed CA on this server to issue certificate to Exchange. I configured phone download root cert of CA and certificate of Exchange. If you require any information,
please let me know.
I don't know what mechanism that phone used to connect to Exchange to download calendar. And don't have any document configuration. If you have any experience, please share with me.
Hoang Vu,
Thanks

Hi,
You mentioned the client sent back bad certificate, please check if the certificate was configured correctly.
For this issue, I recommend you contact the Avaya IP Phone support to get better help. Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Issue with SLA reports of Exchange 2010 MP in SCOM 2007 R2 !!

Similar Messages

Maybe you are looking for