Issue with templates and updating .html pages in my website

Hello,
I have taken over updating a website for the charity I work for. I have updated some eleements of the .dwt template page, however it does not seem to be updating the other .html pages for the website. I do not get the update pages box just a box saying 'You placed the editable region "breadcrumbs" inside a block tag. Users of this template will not be able to create new blocks in this region. Move the region outside the block tag if you want users to be able to do this" - I click OK and it saves the .dwt page, but does not update any other .html pages.

I cannot answer your question(s), I have only hearsay experience, but I can offer some links on where to get information regarding Flash SEO...
http://www.seobook.com/archives/001457.shtml
http://www.flashseo.com/
http://blog.searchenginewatch.com/090317-120653
and the O'Reilly book: Search Engine Optimization for Flash by Todd Perkins, ISBN: 978-0-596-52252-0

Similar Messages

I'm having issues with downloading and updating my softwares in creative cloud...

I've been notified by creative cloud telling me that 6 of my softwares (Premier, After Effecs, Bridge, Photoshop etc) need updating. I clicked update on all of them at the same time and only one of them (speedgrade) successfully updated. All the rest of them are saying there was an error and that that they are unable to update.The same happens whenever I retry the update.
Any solutions?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have been having issues with downloading and updating apps on my iPod 4th gen. How do I fix this? It's getting really old really fast.

So yeah, this has been going on the past week. When I tap to upload my apps, some update right away, but others won't. Sometimes they will dowload half way, sometimes they won't at all, what causes them to stop is this little message that pops up saying, "This app cannot be downloaded at this time." and it gives you options 'Done' or 'Retry." Instinctively I hit retry. Through the course of the day I did this, I kept hitting retry, and eventually all the apps that were updating, updated, but not very effieciently. All apps updated, except for one, Facebook. No matter how anytimes I hit retry, it wouldn't update. I got real sick and tired of it, so I deleted it. I decided to go through everything and delete old apps, pictures, music, thinking that I didn't have enough space. I go to download an app I've already had to test this theory out: Still doesn't work. The stupid thing won't even TRY to download. So, is there any way I can fix this without taking a sledgehammer to my iPod? Because, honestly, I am severly ticked off at how stubborn this is. Please help. Before my patience runs out and I break this thing.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.

Issue with template based hire status page

I have resolved the error new hire BUT the list of error in “Template Hire Status” is still there. According to user previously after they resolve the error employee, the error will disappear. In Manage Hires page, there aren’t any pending employees anymore. But in the template hire status page, the error log still exist there.How to remove the list of error from this page?

I have resolved the error new hire BUT the list of error in “Template Hire Status” is still there. According to user previously after they resolve the error employee, the error will disappear. In Manage Hires page, there aren’t any pending employees anymore. But in the template hire status page, the error log still exist there.How to remove the list of error from this page?

Need help bad!! issues with usb and updating to 10.4.11

So a few weeks back I was getting error that was something like IOUFamily.kext was missing and it would not let me attach a usb flash stick. but the usb mouse and keyboard have worked fine. TOday i installed the 10.4.11 update from 10.4.9, now the mac is stuck at the loggin screen and i can't get any mouse or keyboard to work! so i can't even access the mac! Please help!

First, which machine is it? There are no G5 Intels. There are G3, G4, G5s, and there are IntelMacs.
Try booting from the install CD/DVD. You may have to unplug everything for a few minutes first.

I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one

I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I applied a template to a page with SWFs and now that page does not play the SWFs. Why?

I applied a template to a page with SWFs and now that page does not play the SWFs (just a blank area where the SWF should be). When I detach the template it will play the flash file. This site will eventually be updated via Adobe Contribute. And I just discovered that when applying a template to a page that uses HTML datasets (Master/Detail),it no longer reads the Master/detail regions and displays a blank. Any thoughts?
[Moved to Dreamweaver forum by moderator]

Firstly, you shouldn't really 'apply' a template to a page, you should create a child page by going to FILE>NEW>Page from Template. Too many things can happen when applying a template the way you are doing it. eg:; editable and non-editable regions not matching up and being asked where to place these regions and in all likelihood, you end up with 2 or more of the same region.
When a swf file is inserted into a page, a corresponding Scripts folder is written automatically is stored in the root of the site - it is also linked to in the head of the document. What I believe is happening is that when you apply a template to the page, the Template has no idea that there is a swf file on the page and is not aware of the correct link to the Scripts folder. If you do a test and add the swf file to the template page itself, I bet that the links to the swf and the scripts folder are correct - because DW knows the correct path to the script file. Hence the reason the page probably works when you detach it from a template.

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

Are there any known issues with the latest update to iTunes on Windows 7 maxing out the processor and nearly bringing the system to a hault.

Has anyone experienced an issue with the latest update to iTunes (11.2.0.115) for Windows where iTunes pegs out the processor at 97%, 98%, and holds there for maybe 15 minutes before dropping to 50%. During that time, the system is basically useless. You just have to ride it out. I'm running Windows 7 Home Premium.

Hi OnceBeforeIDie,
Welcome to Apple Support Communities!
Take a look at the article below, it has some some tips that will resolve a performance issues like the one you described.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
-Jason

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

Since updating to iOS 7.1, having issues with safari and wi-fi...

Since upgrading to iOS 7.1, I have experienced issues with wifi and safari. Many websites will not load and I receive the message that "Safari cannot open the page as the server cannot be found". This only happens with the iPad (iPhone 5 is fine), and the same problems do not exist when using 3G (cellular). I have tried a reset, renewing the lease, forgetting the network, rebooting, resetting the modem... Any help would be greatly appreciated.

Hello TunnieZee,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Have a nice day,
Mario

Template not updating child pages

Hi, here's a link to the conundrum:
http://theexperience-exchange.co.uk/stop.html
This page (as are a few others) is based on a template document (stored in a Templates folder in the site root).
I added an editable region in the form of a new div with some text etc. When I do a 'save' I get the update files dialogue box, but it doesn't update the child pages.
I did look on the forum for an answer, althought there are similar examples of this issue, they don't seem to have had any dircet help.
As ever, any ideas would be greatly appreciated.
I'm signing off for the night, catch up with you all in the morning.
Thanks in anticipation
RP

Let's start with the obvious things.
1. Are you sure you're editing the correct template.dwt file?
Your Stop.html page is referencing this one. internal_pages.dwt
2. After saving your template and updating the child pages, did you upload the child pages to your server?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Issues with wifi since updating to iOS 6 on iPad 3.

I'm having wifi issues since updating to iOS 6 on my iPad 3. I can't access certain sites and get error messages such as 'servor can't connect' and 'request timed out.' Although some sites work fine. I can't access apps which require internet such as facebook, iMessenger, face time and games which need internet access. I can't use iTunes or App store and get the message 'can't connect to iTunes try again.' All these problems started after I updated to iOS 6. I found that the iPad works fine at another location on a different wifi but not at home. The home internet is not the issue as laptops, phones and iPad 1 and 2 all work fine on the internet here. I took my iPad to the apple store with no help and no useful advice so came back again and they offered me a hardware swap which I took. I now have the new iPad but the issue still remains. I have tried everything and I have done everything that has been suggested. Some things I have done are reset network settings, reset all settings, changed wifi dns, changed HTTP proxy to auto, closed all apps and re-opened, fully shut down the iPad, turned off the wifi router and restored the iPad several times. I have searched for help and advice and found that there are many complaints about iOS 6 on the iPad 3 when it comes to wifi. What else is there for me to do to fix this problem? I can't use internet or apps that require internet, basically my iPad is of no use at the moment. Do I have to wait for a new software update which will address this problem?

Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

Photo file issues with iWeb and Aperture....also too much duplicating!!

A little background, before I get into my iWeb issue.....
Years ago I tried iPhoto, but I didn't like how it duplicated all my photo files and I wasn't very fond of the file structure it created. Years later (last month) I got Aperture. Aperture (still has a long way to go) also duplicates all your files and places them in their own file structure. If I can get along with Aperture (and if it will get along with my other programs), I won't mind putting all my files into the file structure it creates. But for now, I still have my original files in the original file structure I have had for many years as a back up.
On to my issue with iWeb and Aperture....
To add photos to iWeb, you can either go into the iWeb media center or you can drag and drop photos from other locations.
1st: iWeb media center
To get my photos into the media center, I would have to load them into iPhoto (iP 6 does allow you to keep your original file structure, but it still creates .jpg files, which fills up your hard-drive. More duplicates I don't need or want). So that is out for me. iP6 will let you view and use your Raw files.
Another way is to drag and drop your file structure directly into the media center window. I don't think this duplicates any files (at least I haven't been able to find any), but it takes an awfully long time to thumbnail all your photos (several hours and still waiting for 22K + files). Also, it won't show any Raw files. Again, out for me.
Aperture won't let you drag and drop its library into the media center at all. So if I was to move all my files into the Aperture Library, I wouldn't be able to access them for iWeb at all.....Out for me.
2nd: Drag and Drop
I was able to drag and drop Raw files directly into iWeb from C1 Pro, Adobe Bridge and Adobe Lightroom.
As I said before, I am trying to move over to Aperture. However, Aperture won't let me drag and drop photos. What is the deal here??? These are both Apple programs and they won't play nice with each other. Very annoying.
Anyway, I put a link below to my iWeb test webpage I made. All the photos were Raw files that I did a drag and drop from C1 Pro, Adobe Bridge and Lightroom. There were no problems with the publishing.
http://web.mac.com/phil_navarro/iWeb/Site%202/Drag%20and%20Drop%20test.html
So, does anyone know if they can get photos from Aperture to work?? Thanks for any responses.
Phil
G5 Desktop Mac OS X (10.4.4)

Jedi,
Perhaps you are right.
I am not a web developer and I will never be. I don't feel like spending countless hours learning how to use Dreamweaver or some other Pro web app. iWeb looked like a way to start making websites of my photos for my friends and family (much easier and better than Home Page on .Mac). All I was asking was for a way to drag and drop my photos (especially Raw files) with Aperture. Which I can do with Lightroom, Adobe Bridge and C1 Pro, and without using iPhoto.
I am not a Pro photographer either, but I purchased Aperture based on what was advertised on the Apple website. From that ad, Aperture fit my photo needs almost to a tee. I am looking to adjust Raw files, Crop, Archive and keep my use of Hard Disk space down to a minimum. I can use Photoshop for the other 5% of things I do. However, Aperture has some issues (if you own it, then you already know. If you don't, you can read the Aperture Forum) This is one of the reasons I never went to iPhoto for archiving. I didn't like the way it duplicated all my files, taking up more disk space and its file structure. So even though Aperture won't play nice with other programs, I was surprised that it wouldn't play nice with any Apple programs.
After reading your post and based on what you are saying, everyone either needs to have/learn/use Pro apps only or have/learn/use iApps only. Don't Cross the Streams!!
I guess that means Apple will need to fix DVD Studio Pro. It uses photos that are in your iPhoto library and music from iTunes (iApps in a Pro app??....for shame...."it was never intended"). Also, DVD SP won't read the Aperture library. Does that mean there are 3 platforms? Pro, iApp and Mediocre??
Now I have 2 questions:
1. Can someone please tell me which apps are Pro and iApp, or if there is Mediocre? I don't want to mix them up and "Cross the Streams".
2. Again....is there anyway to use Aperture with iWeb?
TIA,
Narvon

Issue with templates and updating .html pages in my website

Similar Messages

Maybe you are looking for