Issue with Variable screen

Hi,
When I execute the webtemplate with cetain selection values, the out put looks good. When I go back and change the values in selection, the output is still showing the previous results.
The variable screen is not refreshing in webtemplate.
Please let me know if any solution for this....
Thanks in advance,
Murthy.

Hi Rama,
Cache memory stores previous result so you need to logout and then again run the WAD.
Do the following 2 things and see:
1. Empty your internet explorer cache, i.e. delete all temporary files from IE.
2. Go into BI, execue RSRT1, select the cache monitor button. In there there is another button for main memory, click that. Search for the query in question and delete the cache from there.
Close you Internet explorer and open the query again, it should work.
Cheers,
Uday.

Similar Messages

Issue with variable screen while running query on portal or in a workbook

Hello
I have a peculiar problem. The query has a variable on a char which is a combination of date+time = 20100817 12:34:45.
Now, when I give a range as selection, for ex: 08/01/2010 - 08/10/2010 the query incorporates it as 20100801 00:00:00 - 20100810 00:00:00 and it gives all the records for this range.
1. Now, I save it as a workbook. Then if i open the workbook and run it, the output is 'No data found'. Its saying that it cant interpret 20100810 00:00:00 as a number.
My question: I know there are no master data values specifically for 20100801 00:00:00 & 20100810 00:00:00.. but still the query works when i just give the dates. And it dosent work when i run the workbook.. why??
Regards.

Solved it myself.

Having issue with variable after upgrade in bi7.0

Hi,
I have issue with variable
For example Plant info object has attributes country, company code, storage location
etc.
When I run the report. If I click on plant variable it is showing me the all the data for all country , compony code , storage location. I donot want this.
I just want only plant input values on variable screen
Thanks,
Naman Shah

Naman,
What is your SP level ?
Also the characteristics mentioned - are they compounding attributes ? if yes then tey will come in your variable entry.

Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Thank you!

We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

Issue with Variable Entry in BI 7.0

Hi,
I am having an issue with the variable entry in BI 7.0 Version. Here is a brief background.
--- In BW 3.x, when we define a variable with <b>Single Value Option</b>, you can enter the value manually in the pop-up selection screen or select from the dropdown of possible values.
---But in 7.0 when i try to enter the value manually in the selection screen its opening the dropdown list, and is not giving me the option to enter a value manually. I am entering a valid single value in selection.
Is this a bug or do i have to make any specific settings to correct my issue?

When the selection screen pops up choose the KEY only function on the TOOLS on the top right corner of the screen. Then you will be able to enter the values manually.
Hope this helps.

Performance Issue with Selection Screen Values

Hi,
I am facing a performance issue(seems like a performance issue ) in my project.
I have a query with some RKFs and sales area in filters (single value variable which is optional).
Query is by default restricted by current month.
The Cube on which the query operates has around 400,000 records for a month.
The Cube gets loaded every three hours
When I run the query with no filters I get the output within 10~15 secs.
The issue I am facing is that, when I enter a sales area in my selection screen the query gets stuck in the data selection step. In fact we are facing the same problem if we use one or two other characteristics in our selection screen
We have aggregates/indexes etc on our cube.
Has any one faced a similar situation?
Does any one have any comments on this ?
Your help will be appreciated. Thanks

Hi A R,
Goto RSRT--> Give ur query anme --> Execute =Debug
--> No a pop up ill come with many check boxes select "Display Aggregates found" option --> now give ur
selections in variable screen > first it will give the already existing aggregate names> continue> now after displaying all the aggregates it will display the list of objects realted to cube wise> try to copy these objects into notepad> again go with ur drill downs now u'll get the already existing aggregates for this drill down-> it will display the list of objects> copy them to notepad> now sort all the objects related to one cube by deleting duplicate objects in the note pad>goto that Infocube> context>maintain aggregates> create aggregate on the objects u copied into note pad.
now try to execyte the report... it should work properly with out delays for those selections.
I hope it helps you...
Regards,
Ramki.

Issue with Variable Personalisation in Bex Report

Hi Gurus,
I'm facing a typical problem with Variable presonalisation in the Report.
I've executed a BEX Report and filtered data on some characteristics and used SAVE AS Button on the Portal to save the resultset. When I'm trying to use the variants, again say after 2 or 3 days i couldn't find updated data for particular variants upon using the same variants rather its refelecting the old data. Further more when I execute the report and try filtering on the same criteria altogether, I'm able to see updated result set.
Is there any setting to be enabled when we personalise variants or variants are dependent on the data or the date on which they are created. Not sure why the reports are behaving this way. Or Do I need to create variants time and again.
Any pointers would be of great help.
Regard,
Yaseen

Hello,
In the BEx report, when you get the variable selection screen there input your selection and at the bottom you have the option of saving them as a variant.
Now in future when you run the report simply use this variant and execute the report. It should work fine.
Also remember date selection can be tricky. If you input todays date in the variant, it wil consider the same date in further references. So do a check on that too.
Regards,
Shashank

Issue with Variable on 0FISCPER

Hi,
I am using a single value/ mandatory variable on 0FISCPER in my queries. It has been working fine till now but when i click on the drill down of that variable in the selection screen, it gives me a 500 INTERNAL SERVER ERROR (java.lang.NullPointerException). IF i enter a value manually without clicking on the drop down, it is working fine and the query is getting executed. How can i resolve this problem.
Thanks
Rashmi.

Hi,
Search in SDN, I don't think that is problem with Variable..
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/f89f3f12e1eb0ce10000000a114084/frameset.htm
File Sender java.lang.NullPointerException
Re: File Sender java.lang.NullPointerException
500 Internal server error
Thanks
Reddy

Issue with @variable('DOCNAME')

I added a where clause using the BO designer that uses @variable ('DOCNAME') and it work perfect when running webi reports. But I also have some crystal reports that are using the universe and they suddenly stopped working. Does the variable 'DOCNAME' have an issue with cyrstal reports??
Even if I just create an object that simply displays the @variable ('DOCNAME'), I still run into the same problem.
I have another query that uses @variable ('BOUSER') and that one works fine on both webi and crystal reports.

Nevermind, I may have found an answer. Based on what the article below states, it looks like the only variable that is supported in Crystal Reports is 'BOUSER'.
[https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/20984c2b-17f1-2b10-1091-d18977f7cd8f|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/20984c2b-17f1-2b10-1091-d18977f7cd8f]

OS X LION Issues with Full-Screen; iPhoto, Image Capture & Mail

Hello,
I'm experiencing un-Apple-like issues (bugs) with Lion in Full-Screen mode.
For example - iPhoto doesn't seem to like Full-Screen mode. If iPhoto is open and I connect a camera, for which I prefer Image Capture to retrieve my pics... Image Capture opens 'behind' the full-screen iPhoto, but I can't get to it. Image Capture shows as open on the menu bar in iPhoto's full-screen mode. If I go to the desktop (where it should be opening) Image Capture isn't 'on top' and clicking it takes me back to iPhoto full-screen
Similarly, if I get mail and return to the desktop (the only way to see the dock) and I click on the 'Mail' app icon - I am catapulted into Image Capture... or iPhoto. Returning to the Desktop to click the Mail icon from the dock... takes me to Image Capture... or iPhoto. The 3rd try takes me to the Mail.app which is usually always open and in full-screen mode.
While I'm complaining about bugs, I'd like to mention that I am fully dismayed by the loss of control in full-screen mode when using apps such as Mail or iPhoto. The Mail app opens an email to edit (such as a reply) but you can't access any other mail docs to 'cut and paste' info from. I can only click SEND or CANCEL.
What if I don't want to CANCEL? I just want to go to another email and cut a piece to paste.. I have to exit full-screen mode which allows me to open two email documents at once, then cut and paste. Essentially Mail in Full-Screen is only a reader... not a work area. I can only access the document I have open, since it greys out the Message Viewer. You can't click on the message viewer nor access any of the features of Mail.app. You can only write your email and either Cancel or Send. Where is the 'hold on a second while I go cut and paste'? I don't want to cancel.
Can't seem to use Safari since I'm constantly three-finger swiping it away. My cursor hovers over a text field and suddenly it's zooming in and locks text input. I have to iPhone-like swipe to expand to exit this inadvertent partial (very slight) zoom. Sometimes the zoom is so partial that I can't figure out what's going on until I just exit full-screen mode, close the window and start over.
Seems like I'm starting over and over and over... just to do simple things. Inadvertent zooming, inadvertent 3-finger returning to Desktop, inadvertent changing apps... ugh.
I'm willing to let go of the old and embrace the new future but so far it's been pretty uncomfortable for me to constantly monitor my overly sensitive trackpad gesturing combined with constant bugs and glitches. I'll save complaining about iPhoto's over-simplification (apparently for dummies) like the new Edit menu, Export menu, etc.. since it's more iLife than Lion related. Rate Lion: 2 out of 5 stars for ease of use & features complicated by unrefined software issues.

I've tried follwoing these instructions but I have an issue with
# Create snort user. The intention is to let user snort have access only to the snort database.
$ sudo createuser -U _postgres -P snort
Password:
Enter password for new role:
Enter it again:
Shall the new role be a superuser? (y/n) n
Shall the new role be allowed to create databases? (y/n) n
Shall the new role be allowed to create more new roles? (y/n) n
It keeps telling me "could not connect to database postgres: could not connect to server: No such file or directory"
I'm running OSX Mountain Lion, and have verified using serveradmin status postgres that it is up and running.

Issue with Variables using Customer Exit.

Dear All,
I have the following scenario,
I the Variable Screen I have 4 variables, lets say for eg: Plant, Material, Material Group, Calendar Day.
Then I have 4 Customer Exit Variables in the report, 2 of type Char Value Variables and 2 of type Text Variables.
I have written the customer exit code and all the 4 customer exit variables derive their values from the Calendar Day Variable from Variable Screen.
In the Variable screen if i give the values only for the variable calendar the report executes fine.
But along with Calendar Day If I enter values for any other variable the report gives the following error message - "No value could be determined for variable VAR_CALDAY_CEXIT_1." VAR_CALDAY_CEXIT_1 is the name of my one of the Customer Exit Variables.
Please let me know how to solve this problem.
Cheers,
Neel.

IF i_step = 2.
CASE i_vnam.
       WHEN 'VAR_CALDAY_CEXIT_1'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 1.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
       WHEN 'VAR_CALDAY_TEXT_CEXIT_1'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 1.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
        WHEN 'VAR_CALDAY_CEXIT_2'.
        LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 2.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
       WHEN 'VAR_CALDAY_TEXT_CEXIT_2'.
       LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'VAR_CALDAY_MULSIN_MAN'.
         CLEAR L_S_RANGE.
         IF SY-TABIX = 2.
         L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
         L_S_RANGE-SIGN = 'I'.
         L_S_RANGE-OPT = 'EQ'.
       APPEND L_S_RANGE TO E_T_RANGE.
       ENDIF.
       ENDLOOP.
ENDCASE.
ENDIF.
'VAR_CALDAY_MULSIN_MAN' is the Calenday Day Variable from the Variable Screen.
It is of type multiple single values.
The User enters two dates and then the code is utilized to pass these 2 dates to 2 Char Value Variables and 2 Text Variables.
Once again, if i do not enter the values for any other variable then the report executes fine.
Cheers,
Neel.

Issue with Variable screen

Similar Messages

Maybe you are looking for