Issues during SPDD - Urejent

Hi,
We are doing the upgrade from SAP R3 4.6C to ERP 6.0, during SPDD phase we are getting errors while adjusting table VBAP. If you go to tcode SE14 there it is not allowing us to activate and adjust database. While activating the table it throws the error message as "Table VBAP could not be activated - E- Table VBAP ( error adjusting the database)"
Thanks in advnace.

You will need to find out, why it can´t be activated, you will get lots of subsequent errors if you ignore that.
Markus

Similar Messages

  • Issues during upgrade - SPDD

    Hi,
    We are doing the upgrade from SAP R3 4.6C to ERP 6.0, during SPDD phase we are getting errors while adjusting table VBAP. If you go to tcode SE14 there it is not allowing us to activate and adjust database. While activating the table it throws the error message as "Table VBAP could not be activated - E- Table VBAP ( error adjusting the database)"
    Thanks in advnace.

    Hi,
    Have you compared as what changes were made to the VBAP in 4.6C.
    Also can you tell what is the long text of the message.
    regards,
    Atish

  • Issues during Component Batch Determination for Process Orders

    Hi,
    I am encountering a strange issue during component batch determination of process order.
    1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
    "Log cannot be saved: Object/subobject not specified"
    Message no. BL201
    *Diagnosis
    Log save cancelled because at least one log contains no object or subobject.
    Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
    If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
    Procedure for System Administration
    Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
    The possible values for object and sub object must be configured in transaction SLG0.*
    If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
    Again when the order is in REL status and do the determination, It gives the same error.
    This happens only for a specific plant, In other plants batch determination works in all scenarios.
    I checked for all plant related Config for batch determination and coudn't find any discrepancies.
    Please advise how to resolve this issue. Thanks in advance for your help
    Regards,
    Aheesh

    There Is no direct solution for your requirement just try this work around.
    While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
    Regards,
    Ajay Nikte

  • Issue during automatic Creation of Work Order from Notification

    Hi,
    I have a issue during automatic Creation of Work Order from Notification.
    BADI implemented: NOTIF_EVENT_POST
    BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
    I am able to create Work Order successfully but after that i need to update notification header with created work order number.
    But i am unable to update the same (VIQMEL-AUFNR).
    Can anybody provide solution for the same!
    Thanks,
    Kumar.

    Hi,
    Any inputs on above posted issue!
    Thanks in advance.
    Thanks,
    Kumar.

  • Automating Goods issue during Delivery creation

    Hi all,
    We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
    We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
    But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
    The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
    I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
    Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
    Thanks,
    Packia

    Dear Siva,
    As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
    Please let me summarize, I am really desparate here:
    This is only IM related, Not WM.
    Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
    Issue is not Aut. PGI.
    VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
    In the deliveries of correct processed shipping points  I do not find any picking output type.
    Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
    There is no picking block active.
    PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
    Can you please try to help me out?
    Tnx & regards,
    Chris

  • Critical Issues During SAP Implementation or After Golive

    Can anybody tell me one of  the most critical/ challenging issues During SAP Implementation or After Golive
    in these modules:-
    MM implementation
    PP implementation
    SD implementation
    FI/CO implementation
    PS implementation
    QM implementation
    HR implementation
    BI implementation
    XI implementation
    Thanks and regards
    RS

    hi,
    I will list out few of critical issues in
    Implementation :
    1 . Ensure 100% mapping of business process for all modules with SAP(avoid customization in support phase)
    2.  Unit & Integeration testing should be through with all validations
    3.  Master datas(Vendor,Customer) care must be taken will uploading datas thru LSMW,
    If there are common vendors for all plants,Create a vendor for a plant extend it to other plants
    4. Check tax procedures are customized according to requirements.
    5. Complete all print document customizations before go live
    6. Complete end user training(2 or more cycles) should be top priority before go live(This will avoid
    cancellation/reversal of documents after post go live)
    7. Ready with standard MIS reports & customized reports for business decision making
    8. Excise opening balance updation in tables for RG1 register in tables(Note 951955) on go live
    9. Check all tables datas are updating correctly
    10. Declare go live to SAP Support
    11. Check All user authorization should be correct according to their roles.
    12. Centeralize all master datas creation(avoid duplication)
    13. Create transaction variants to avoid entires in unnecessary fields & make certain fields mandatory.
    14. Ensure document numbering is completed for all documents
    15. Validate accounting entries are hit properly according to requirement in quality client with FI CTM(Core team member).
    After Go live :
    1. Missing authorization for users will play key part here,For ex : PGI while doing delivery,Excise capture & post in MIGO/J1IEX.
    2. Do internal audit every month,identify transactions if there will possibility for misuse or wrong entries,requires validation,identify users weak in certain areas.
    3. Identify there is enhancements to be done in transaction process(By step-2)
    4. Prepare a list of month & year end activities to be performed for all modules give to users
    5. Prepare  a list of frequently used transaction codes module wise give it to users
    6. If there is subcontracting,ensure challan creation,GR,reconcillation should be done regulary(monthly)
    7. Train the users,take reports in respective modules.
    8. Additonal customization might be done in print documents.
    9. Instruct users/CTM's to adapt SAP Standard practise
    10. Update excise tax rates after every indian budget
    Hope it helps.
    Edited by: Jeyakanthan A on Apr 29, 2010 6:48 PM

  • Issue during Save - BDT

    Hi All,
    I have added 2 custom fields in the additional tab of the BP transaction using BDT.
    I have enhanced the table BUT000 with the above two fields using append structure.
    But now i got following few issues during saving the BP.
    1) Not able to save those two custom field values in the corresponding table of BUT000.
         As i was new to BDT could any one guide me how to save the custom field information in BDT?
      2) If I am changing any one of the fields and trying to save for any existing BP,
          It was throwing a message saying 'No changes done to the transaction'.
          Here the Transaction was not recognizing the fields even if the changes done.
          Could any one please let me know how to handle this?
    Thanks in advance.
    Regards,
    Gopi.

    Hi,
    1> Did you implement function module for DSAVE event? Check if you have  different names for the field in the BDT table and the database table in the BDT setting
    Assign field to DB
    2> You need to write a function module for XCHNG event and export 'X' after checking the old and new memory for changes. This will correct the message.
    Thanks and warm regards,
    Smita.

  • Version compare during SPDD

    Hello, We are in the process of carrying upgrade. I am using SPDD. I see some yellow lights for table indexes. For most of the table indexes, when i do the version compare i see that almost 99% of the old version are identical to the current version and need no changes to the new version. Am i doing the version comparison correctly? Do i need to create a Transport (TR) even if the versions are identical? Thanks

    Hi Ricky,
    It's this function and the literature says it's a valid choice during SPDD phase:
    Yes, the object should get added to SPDD TR and should disappear from SPDD after refresh.
    However, after reading the follwing helptext to Message no. 0M400 (I do think it applies only to using SE95 to reset, not the SPDD):
    "In the Modification Browser (Transaction se95), you can reset modified objects to the original.
    Caution: In the SPDD phase, you should never use SE95 to reset objects because activation is required for this. Instead, modify the object - for example, using SE11 - so that it is identical with the original object. For this purpose, use the compare option in Version Management."
    you also could choose to play safe, accept the "nonexistant" Modification, and reset to original in SE95 only after you are through with SPDD and DDIC Activation and have released the SPDD TR. You'll record the resets to original in another TR then.
    Reset to original is also possible only if you do have the original in the system; use menu Modifications->Display Original to verify that.
    cheers
    Janis

  • Public Sector: Will this have any issues during Siebel upgrade?

    Hello,
    We are using Siebel Public Sector application (Case Management) in our product.
    Every contact who is Primary under a Contact will be associated to a Master Case. If there is no master case associated with primary contact, siebel will create a new master case. In other words, Contact to Master Case is 1:1 relationship.
    We are in the process of developing a new requirement where in a Contact can be linked to one or more Master Cases (1:M). Since this is deviates Siebel OOB feature we do not want to change it.
    Instead, we have created a new custom stand-alone Table (which mimics OOB Master Case columns) and a "New Custom BC".
    Created a link betwen Contact BC and New Custom BC (Id -> Par Row Id).
    In "New Custom BC", field called "Master Case Number"  has a dynamic picklist based on OOB "PUB Master Case" BC.
    For other field we have mapped using pickmaps.
    Our requirement is met but our only question is "Will this have any issues during Siebel upgrade?"
    Quick responses will be very helpful.

    Thank you for your reply.  I only see three versions of Adobe Reader available for Windows XP SP3 at the Adobe site
    http://get.adobe.com/reader/otherversions
    In doing some research, it seems there were some issues if you skipped an update but I did not find any information (only other queries) as to my original question of compatibility.  Also, how can we access the older file if it won't open in 10.1.2?
    Can I load 10.1.2 in addition to their older version to check and see what will or will not open correctly before I uninstall the older version?  I don't want to load the new version and then have them not be able to access a needed file...

  • Issue during creation of control cycle

    Dear Gurus,
    During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
    I compared control cycle in a different ECC system where source information is appearing.
    How can make the screen appear in my ECC system.
    Please find the screenshot.
    Any pointers will be highly appreciated.
    This thread is further to the thread in Production Planning Forum
    http://scn.sap.com/thread/3609441
    With Regards,
    Malay

    Manish,
    I do not understand how this going to solve the issue because why we need both KANBAN and WM control cycles for one material withdrawal for production?
    Br
    KK

  • MSI Neo2 K8N Platinum - Freezing Issue during games

    First off greetings to everyone on these forums...
    I purchased the MSI Neo2 K8N Platinum motherboard from NewEgg back at the end of March to compliment the AMD 64 "Winchester" processor that I also purchased at that time to replace a slightly older AMD XP "Barton" system that was using the Abit NF7-S motherboard. For the past month I have been fighting an unusual and highly irritating issue that I have noticed during game play and have tried everything that I know of and more in an attempt to remedy this issue, but to no avail. This is the general background of the situation and now I will descibe in greater detail as to what this issue I am referring to is and the symptoms of this issue and some of the various methods used to remedy this issue.
    The issue is that while play a game the system experiences a short 5-10 second freeze during the game randomly, but usually several times an hour. During this freezing the sound would loop and as suddenly as the freeze occurs it would cease and the game would continue on as if nothing happened. However, sometimes this would result in the system freezing outright after this short 5-10 second freeze... but it does not feel like a total system freeze, but rather a video freeze as the sound continues and I still have keyboard control... but this does require me to force a manual reboot of the machine itself. I have scowered the internet and various forums in an attempt to find what the issue was and use various methods to remedy this issue, but so far nothing has worked in my favor... but it does seem like this issue has been plaguing other users with the MSI Neo2 Platinum motherboard. Below are some of the methods that I have used in an attempt to solve this issue:
    *Default Clock for CPU/Memory/GPU; Over/Under Clock for CPU/Memory/GPU
    *Increased voltages to CPU VID, AGP, and Memory
    *Disabled/Enabled AGP Fast Writes
    *Increased AGP Aperture from 64MB to 512MB
    *Enabled/Disabled ATI/nVidia Speedup option in BIOS
    *Forced AGP clock lock to 66-67mhz
    *Relaxed/Aggressive memory timings
    *APIC enabled/disabled
    *Gate A20 turbo/normal
    *Disabled all unneeded onboard components (Realtek NIC, Sound, SATA)
    *Disabled nVidia MAC and attempted to use 3Com Gigabit PCI card instead
    *Swapped HDD Cables
    *Tried PCI Sound Card (SB Audigy2 ZS Gamer) in PCI Slots 3/4
    *Tried video drivers from 71.89 Official to 76.45 beta modified drivers
    *Tried 5.10 official nForce drivers to remixed 7.02 nForce drivers (5.10 drivers uses 4.36 GART, higher drivers uses the 4.40 GART)
    *Applied all the latest updates from Windows Update Website
    *Reinstalled Operating System (Windows XP SP2) 5 different times clean with various settings (APIC on/off, etc...) and different drivers.
    *Installed Audio Card (SB Audigy2 ZS Gamer) with older and the latest drivers available from Creative's website
    *Replaced PSU (Previously was a Thermaltake 420watt PSU, 18A +12v) with a OCZ Modstream 520watt PSU (28A +12v)
    *Video card is KNOWN working from previous build (AMD XP 3000, Abit NF7-S)
    *Hard Drive is KNOWN working from previous build
    *CD/DVD-ROM drive is kNOWN working from previous build
    *Heat is not an issue... all components temperature is well below rated level, the only unknown is the chipset temperature (it has a active heatsink and seems to not be hot to the touch, applied AS5 to it anyway)
    *Used latency tweak to the video card
    *Used Rivatuner to force constant performance level
    *Tweaked BIOS to force even clock rates and forced 1.4v to the GPU Core
    *Used original GPU BIOS
    *Used MSI Neo2 K8N Bios 1.4 - 1.8 and modified BIOS 1.8
    *No background applications are running (not even antivirus)
    *Used application to force maximum refresh rates for my monitor
    *Memory passed MemTest86+ for over 24 hours
    *System passed Prime95 and SuperPi for over 24 hours
    *System seems stable in all non gaming related applications
    *Checked through various troubleshooting procedures
    *Disabled SBDRVDET.EXE using MSCONFIG
    *There are no IRQ conflicts outside of PCI system management sharing IRQ11 with the NIC and USB... in APIC there are no IRQ conflicts what so ever. Regardless neither method worked
    *Installed AMD 64 drivers from AMD
    *Disabled DEP in boot.ini
    *...and many other various tweaks and modifications.
    System Specifications
    CPU - AMD 64 3200+ "Winchester", using Thermaltake Silentboost K8 and AS5
    Motherboard - MSI Neo2 K8N Platinum (nForce3 250GB Ultra) - Using Bios version 1.8
    Memory - 2X 512MB Corsair XMS TwinX1024-3200C2PT (2 Modules, Memory Slots 1 and 2 used)
    Audio - Sound Blaster Audigy2 ZS (PCI Slot 3 used)
    NIC - Onboard nVidia MAC, Disabled Realtek NIC
    Video - XFX Geforce 6800NU 128MB AGP (BIOS Rev 1) - NV Silencer 5 and AS5
    Case - Thermaltake Damier Series 5000
    PSU - OCZ Modstream 520watt (28A +12v rail)
    HDD - Western Digital 1200JB 7200rpm IDE
    DVD-ROM - Lite-On 16X DVD-ROM
    Floppy - Mitsumi 1.44MB 3.25"
    OS - Windows XP SP2/DirectX 9c
    I have been fighting this issue for well over a month now and I am frankly nearly out of ideas, this does not necessarly prevent me from playing games, but this does interfere with the games I do play (especially online games). I do demand absolute stability from the games that I play and this issue only began AFTER I upgraded to the new motherboard, processor, and memory. The only thing I have not tried is something that I do not have access in attempting on this motherboard, and that is increasing the voltage to the chipset.
    Here is my theory on what is going on is that I believe is there is a fault with the chipset on this motherboard and this is manifesting itself while I am playing various games on this system. Of course I would like to try increasing the voltage to the chipset as that would increase stability, but there is no option in BIOS to increase the chipset voltage like the previous motherboard I had (Abit NF7-S). It is possible that either a) the chipset is at fault and is causing me this issue or b) the chipset is not recieving enough voltage.
    My question to the rest of you is this, what do you think the problem is and what ideas do you have that I may try that I have not tried yet. Additionally if there is nothing else that I may try should I attempt to RMA this motherboard and will that help, and is there any other versions of this motherboard that I should be aware of. I would appreciate any response from a MSI representative and any comments from those that may have positive suggestions for my issue. Thank you in advance for your time and any help that you may be able to render.
    The GameMaster...
    *EDIT* Added additional methods attempted... (there was a lot... so I did not remember everything that I have tried)

    Quote from: dacull on 25-May-05, 16:06:33
    Does it only happen in online games, or can it happen in all games? One thing to make sure of is to turn off CRC checksum offload in your NVidia MAC properties (everyone do this, it is incorrectly calculating checksums which leads to servers ignoring your packets). However as you have tried a different network card you can discount this theory.
    For me it looks like the biggest culrpit is your 6800NU, i have read alot of bad things about the NU and you have a low bios revision there, just because it worked well against your old chipset doesnt mean it will work well against your current chipset. Sounds like a BIOS fix is needed as some timing is out somewhere.
    Ensure Spread Spectrum is off (and as you have already pointed out Fast writes, ATI NV Speedup) and your card is running at default clock.
    As a test beg/borrow/steal another graphics card (preferably nvidia) and see how it goes so you can narrow in on your video card.
    It is not just one game, but it is more prodominate in certain games than others... the game in question here is Planetside... though I stuck a demo of Unreal Tournament 2004 on a loop bot match and it seemed to have locked up after 4 hours (not sure how many times it experienced that 5-10 freeze as I went to bed). As for the video card it was KNOWN working from a previous build in those same games (Previous build was a AMDXP3000 and a Abit NF7-S nForce2 motherboard). The only components different in this build is the AMD64, the MSI Neo2 K8N, 2 new sticks of Corsair XMS to replace the Corsair ValueSelects, and the SB Audigy2 as I would never use a software codec audio solution. Spread Spectrum is LOCKED in BIOS and disabled... ATI/nVidia speed up was disabled from the start... and I tried the Video Card at default clock, over clocked, as well as under clocked and the same issue resulted... as I said before it is NOT the video card.
    There are two other things I could try is use my old Geforce4ti 4200 and see what happens... or even try out WindowsXP 64-bit edition as someone earlier suggested. I wish I could find a new BIOS for my XFX 6800NU, but there there is only the revision 1 BIOS that I was able to find. The mystery continues...
    The GameMaster...

  • Speed Issues during Prime Time

    Over the last two months my speed during primetime hours 4 pm to around midnight have degraded drastically.  During these hours I typically get 1mbs, during the rest of the hours from midnight to around 4 again, I get the full 7mbs that I pay for.  I thought DSL wasn't supposed to have these problems and it was typical for cable companies.  I would really like this to be resolved as it wasn't always like this and now its to the point where its unacceptable.  I've tried removing my router and connecting both my pc and my mac directly to the dsl during these times incase it was some sort of virus issue, and that didn't solve my problem.  Not really sure what to do.
    So to summerize
    -Slow internet speeds in primetime hours 4  pm to 12 am PST
    -Problem has only been happening in the past three months but has been getting noticeably worse recently.
    -4pm internet speed drops to 1mbs at midnight goes back to the 7 mbs I pay for and stays that way until around the same time the next day.
    Tried hooking up modem to both a pc and a mac and removing the router during these slow periods as well as restarting the modem with no positive result.
    The modem I have is a Westell G90610015-20 Rev E.
    Router is a netgear but again this happens with or without the router.
    Speedtest numbers during these times agree with it, and when I check the modem connection setting it still says I'm at 7000+ down so I'm not exactly sure whats wrong.

    Please post your Modem Transceiver Statistics. You can obtain them by visiting http://192.168.1.1/ , clicking System Monitoring, Advanced Monitors and then Transceiver Statistics. If you are presented with a Username and Password prompt, try one of the following combinations.
    admin/password
    admin/password1
    admin/admin
    admin/admin1
    Your Verizon username and password
    Additionally, how is your voice service, if you have a phone with with Verizon? Do you have Static, buzzing, or any other noise on the line that should not be there? 
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Issue during integrating OIM 9.1 with novell edirectory 8.8

    Hi,
    We are trying to integrate OIM 9.1 with Novell edirectory 8.8 using novell edirectory 9.0.4.2 connector.
    while privisioning i m facing the following issue
    DOBJ.THROWABLE_IN_SAVE Unhandled throwable java.lang.NoClassDefFoundError in com.thortech.xl.dataobj.tcScheduleItem's save.
    User is getting created OID but not provisioned to edirectory.
    Thanks in Advance
    Manju

    Hi,
    Thanks for responding.
    I am trying to provision users to novell edirectory.
    I create user in Oracle Idenity Manager 9.1 then select the Resource profile and provision new resource(to edirectory 8.8).
    During the last step of provisioning when i click continue button Oracle Idenity Manager is throwing the below error in the next screen with message "Provisioning is been initiated". But user is not created in the edirectory.
    DOBJ.THROWABLE_IN_SAVE Unhandled throwable java.lang.NoClassDefFoundError in com.thortech.xl.dataobj.tcScheduleItem's save.
    In the open tasks, System Validation task is created with the status Pending.
    Please help me to rectify this issue.
    Also let me know whether anyone has tried to integrate Oracle Idenity Manger 9.1 with edirectory 8.8 using Novell edirectory 9.0.4.2 connector.
    Thanks

  • Acer D255E backlight issues during boot

    Having an issue with the backlight during the boot process of my netbook. Screen will go blank for 10-15 seconds before returning. This wouldn't be an issue, but it's sitting on the login screen for a good 5-10 seconds so I'd rather fix it.
    This is not a KMS issue, it's the backlight. I can append "nomodeset" to the kernel line and it will still occur. If I shine a flashlight at the screen, I can still see the boot text scrolling.
    Checking dmesg, the most interesting line is:
    [ 6.387788] acer_wmi: Brightness must be controlled by acpi video driver
    I've tried blacklisting that module with no noticeable change. I've also tried several different acpi options such as "acpi_backlight=video", "acpi_backlight=vendor", and the same with "acpi_display_output". "acpi=ht" doesn't work, however with "acpi=off" this no longer occurs (not a solution though).
    lspci:
    00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
    00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
    Full dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012
    [ 0.000000] Command line: root=/dev/sda2 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] Disabled fast string operations
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f494000 (usable)
    [ 0.000000] BIOS-e820: 000000007f494000 - 000000007f4bf000 (reserved)
    [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f577000 (usable)
    [ 0.000000] BIOS-e820: 000000007f577000 - 000000007f5bf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5ec000 (usable)
    [ 0.000000] BIOS-e820: 000000007f5ec000 - 000000007f5ff000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007f5ff000 - 000000007f600000 (usable)
    [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Acer AOD255E/JE02_PT, BIOS V3.10(DDR3) 11/17/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-through
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask 0C0000000 write-back
    [ 0.000000] 2 base 040000000 mask 0C0000000 write-back
    [ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-000000007f600000
    [ 0.000000] 0000000000 - 007f600000 page 2M
    [ 0.000000] kernel direct mapping tables up to 7f600000 @ 1fffd000-20000000
    [ 0.000000] RAMDISK: 7f15f000 - 7f493000
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
    [ 0.000000] ACPI: XSDT 000000007f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000007f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: DSDT 000000007f5f1000 08DCF (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: FACS 000000007f584000 00040
    [ 0.000000] ACPI: HPET 000000007f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: APIC 000000007f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: MCFG 000000007f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SLIC 000000007f5f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: BOOT 000000007f5ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SSDT 000000007f5ed000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: WDAT 000000007f5ec000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000007f600000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000007f600000
    [ 0.000000] NODE_DATA [000000007f5e8000 - 000000007f5ebfff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c800000-ffff88007e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007f494
    [ 0.000000] 0: 0x0007f4bf -> 0x0007f577
    [ 0.000000] 0: 0x0007f5bf -> 0x0007f5ec
    [ 0.000000] 0: 0x0007f5ff -> 0x0007f600
    [ 0.000000] On node 0 totalpages: 521481
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8088 pages used for memmap
    [ 0.000000] DMA32 zone: 509410 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000007f494000 - 000000007f4bf000
    [ 0.000000] PM: Registered nosave memory: 000000007f577000 - 000000007f5bf000
    [ 0.000000] PM: Registered nosave memory: 000000007f5ec000 - 000000007f5ff000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513324
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/sda2 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2038236k/2086912k available (4538k kernel code, 988k absent, 47688k reserved, 4307k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1662.561 MHz processor.
    [ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.66 BogoMIPS (lpj=5541870)
    [ 0.003352] pid_max: default: 32768 minimum: 301
    [ 0.003425] Security Framework initialized
    [ 0.003436] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003903] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.005799] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.007037] Mount-cache hash table entries: 256
    [ 0.007563] Initializing cgroup subsys cpuacct
    [ 0.007572] Initializing cgroup subsys memory
    [ 0.007595] Initializing cgroup subsys devices
    [ 0.007601] Initializing cgroup subsys freezer
    [ 0.007606] Initializing cgroup subsys net_cls
    [ 0.007612] Initializing cgroup subsys blkio
    [ 0.007678] Disabled fast string operations
    [ 0.007688] CPU: Physical Processor ID: 0
    [ 0.007693] CPU: Processor Core ID: 0
    [ 0.007698] mce: CPU supports 5 MCE banks
    [ 0.007711] CPU0: Thermal monitoring enabled (TM2)
    [ 0.007719] using mwait in idle threads.
    [ 0.009091] ACPI: Core revision 20120320
    [ 0.023379] ftrace: allocating 17828 entries in 70 pages
    [ 0.040277] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.073293] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
    [ 0.073329] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
    [ 0.073329] ... version: 3
    [ 0.073329] ... bit width: 40
    [ 0.073329] ... generic registers: 2
    [ 0.073329] ... value mask: 000000ffffffffff
    [ 0.073329] ... max period: 000000007fffffff
    [ 0.073329] ... fixed-purpose events: 3
    [ 0.073329] ... event mask: 0000000700000003
    [ 0.090227] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.110040] Booting Node 0, Processors #1
    [ 0.006666] Disabled fast string operations
    [ 0.123230] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.123346] Brought up 2 CPUs
    [ 0.123354] Total of 2 processors activated (6652.33 BogoMIPS).
    [ 0.123904] devtmpfs: initialized
    [ 0.128532] PM: Registering ACPI NVS region [mem 0x7f577000-0x7f5befff] (294912 bytes)
    [ 0.128532] NET: Registered protocol family 16
    [ 0.128532] ACPI: bus type pci registered
    [ 0.128532] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.128532] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.188435] PCI: Using configuration type 1 for base access
    [ 0.190086] bio: create slab <bio-0> at 0
    [ 0.193414] ACPI: Added _OSI(Module Device)
    [ 0.193421] ACPI: Added _OSI(Processor Device)
    [ 0.193426] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.193431] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.197266] ACPI: EC: Look up EC in DSDT
    [ 0.201283] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.205327] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.206553] ACPI: SSDT 000000007f4b7790 00708 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.207973] ACPI: Dynamic OEM Table Load:
    [ 0.207981] ACPI: SSDT (null) 00708 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.208408] ACPI: SSDT 000000007f4b5690 00646 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.209316] ACPI: Dynamic OEM Table Load:
    [ 0.209323] ACPI: SSDT (null) 00646 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.210234] ACPI: SSDT 000000007f4b6d90 0015F (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.211232] ACPI: Dynamic OEM Table Load:
    [ 0.211239] ACPI: SSDT (null) 0015F (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.211274] ACPI: SSDT 000000007f4b6f10 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.211274] ACPI: Dynamic OEM Table Load:
    [ 0.211274] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.213516] ACPI: Interpreter enabled
    [ 0.213526] ACPI: (supports S0 S3 S4 S5)
    [ 0.213595] ACPI: Using IOAPIC for interrupt routing
    [ 0.350738] ACPI: Power Resource [FN00] (on)
    [ 0.351654] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.352063] ACPI: No dock devices found.
    [ 0.352074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.353084] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.354668] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.354676] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.354683] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.354692] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.354796] PCI host bridge to bus 0000:00
    [ 0.354803] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.354809] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.354815] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.354821] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
    [ 0.354841] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
    [ 0.354904] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
    [ 0.354920] pci 0000:00:02.0: reg 10: [mem 0x98180000-0x981fffff]
    [ 0.354931] pci 0000:00:02.0: reg 14: [io 0x60c0-0x60c7]
    [ 0.354941] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref]
    [ 0.354951] pci 0000:00:02.0: reg 1c: [mem 0x98000000-0x980fffff]
    [ 0.355002] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
    [ 0.355016] pci 0000:00:02.1: reg 10: [mem 0x98100000-0x9817ffff]
    [ 0.355139] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [ 0.355170] pci 0000:00:1b.0: reg 10: [mem 0x98200000-0x98203fff 64bit]
    [ 0.355298] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.355345] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    [ 0.355479] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.355527] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    [ 0.355660] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.355713] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [ 0.355784] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
    [ 0.355843] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [ 0.355913] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
    [ 0.355978] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [ 0.356049] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
    [ 0.356109] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [ 0.356180] pci 0000:00:1d.3: reg 20: [io 0x6020-0x603f]
    [ 0.356253] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [ 0.356285] pci 0000:00:1d.7: reg 10: [mem 0x98204400-0x982047ff]
    [ 0.356414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.356453] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.356576] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
    [ 0.356766] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
    [ 0.356798] pci 0000:00:1f.2: reg 10: [io 0x60b8-0x60bf]
    [ 0.356815] pci 0000:00:1f.2: reg 14: [io 0x60cc-0x60cf]
    [ 0.356832] pci 0000:00:1f.2: reg 18: [io 0x60b0-0x60b7]
    [ 0.356849] pci 0000:00:1f.2: reg 1c: [io 0x60c8-0x60cb]
    [ 0.356866] pci 0000:00:1f.2: reg 20: [io 0x60a0-0x60af]
    [ 0.356883] pci 0000:00:1f.2: reg 24: [mem 0x98204000-0x982043ff]
    [ 0.356954] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.356987] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [ 0.357057] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
    [ 0.357213] pci 0000:01:00.0: [1969:2060] type 00 class 0x020000
    [ 0.357252] pci 0000:01:00.0: reg 10: [mem 0x97000000-0x9703ffff 64bit]
    [ 0.357274] pci 0000:01:00.0: reg 18: [io 0x5000-0x507f]
    [ 0.357433] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.363347] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.363357] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
    [ 0.363367] pci 0000:00:1c.0: bridge window [mem 0x97000000-0x97ffffff]
    [ 0.363380] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
    [ 0.363491] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
    [ 0.363528] pci 0000:02:00.0: reg 10: [mem 0x96000000-0x9600ffff 64bit]
    [ 0.363687] pci 0000:02:00.0: supports D1
    [ 0.363692] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
    [ 0.370004] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.370014] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.370023] pci 0000:00:1c.1: bridge window [mem 0x96000000-0x96ffffff]
    [ 0.370036] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
    [ 0.370138] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.370158] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.370165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.370171] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.370178] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.370213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.370559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.370692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.371048] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.371521] pci0000:00: ACPI _OSC control (0x1c) granted
    [ 0.378569] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.378737] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.378891] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.379046] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.379202] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.379366] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.379523] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.379684] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.379989] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.380009] vgaarb: loaded
    [ 0.380013] vgaarb: bridge control possible 0000:00:02.0
    [ 0.380137] PCI: Using ACPI for IRQ routing
    [ 0.390341] PCI: pci_cache_line_size set to 64 bytes
    [ 0.390459] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.390466] reserve RAM buffer: 000000007f494000 - 000000007fffffff
    [ 0.390473] reserve RAM buffer: 000000007f577000 - 000000007fffffff
    [ 0.390479] reserve RAM buffer: 000000007f5ec000 - 000000007fffffff
    [ 0.390484] reserve RAM buffer: 000000007f600000 - 000000007fffffff
    [ 0.390741] NetLabel: Initializing
    [ 0.390747] NetLabel: domain hash size = 128
    [ 0.390750] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.390779] NetLabel: unlabeled traffic allowed by default
    [ 0.390818] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.390828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.390839] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.400006] Switching to clocksource hpet
    [ 0.418054] pnp: PnP ACPI init
    [ 0.418104] ACPI: bus type pnp registered
    [ 0.418980] pnp 00:00: [bus 00-ff]
    [ 0.418988] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.418994] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.419000] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.419006] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.419011] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.419017] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.419023] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.419029] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.419034] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.419040] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.419046] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.419051] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.419057] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.419063] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.419068] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.419074] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.419080] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.419086] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.419223] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.477040] pnp 00:01: [io 0x0068]
    [ 0.477047] pnp 00:01: [io 0x006c]
    [ 0.477052] pnp 00:01: [io 0x164e-0x164f]
    [ 0.477057] pnp 00:01: [io 0x0061]
    [ 0.477061] pnp 00:01: [io 0x0070]
    [ 0.477066] pnp 00:01: [io 0x0080]
    [ 0.477071] pnp 00:01: [io 0x0092]
    [ 0.477075] pnp 00:01: [io 0x00b2-0x00b3]
    [ 0.477080] pnp 00:01: [io 0x0063]
    [ 0.477085] pnp 00:01: [io 0x0065]
    [ 0.477089] pnp 00:01: [io 0x0067]
    [ 0.477094] pnp 00:01: [io 0x0600-0x060f]
    [ 0.477099] pnp 00:01: [io 0x0610]
    [ 0.477103] pnp 00:01: [io 0x0800-0x080f]
    [ 0.477108] pnp 00:01: [io 0x0810-0x0817]
    [ 0.477113] pnp 00:01: [io 0x0400-0x047f]
    [ 0.477118] pnp 00:01: [io 0x0500-0x053f]
    [ 0.477123] pnp 00:01: [io 0xff2c-0xff2f]
    [ 0.477128] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.477134] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.477139] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.477144] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.477150] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.477155] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.477160] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [ 0.477329] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 0.477338] system 00:01: [io 0x0600-0x060f] has been reserved
    [ 0.477344] system 00:01: [io 0x0610] has been reserved
    [ 0.477351] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.477357] system 00:01: [io 0x0810-0x0817] has been reserved
    [ 0.477364] system 00:01: [io 0x0400-0x047f] has been reserved
    [ 0.477370] system 00:01: [io 0x0500-0x053f] has been reserved
    [ 0.477377] system 00:01: [io 0xff2c-0xff2f] has been reserved
    [ 0.477385] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.477392] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.477398] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.477405] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.477412] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.477419] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.477426] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.477438] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.477469] pnp 00:02: [io 0x0000-0x001f]
    [ 0.477474] pnp 00:02: [io 0x0081-0x0091]
    [ 0.477479] pnp 00:02: [io 0x0093-0x009f]
    [ 0.477484] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.477489] pnp 00:02: [dma 4]
    [ 0.477556] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.477624] pnp 00:03: [io 0x0070-0x0077]
    [ 0.477698] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.477869] pnp 00:04: [irq 0 disabled]
    [ 0.477890] pnp 00:04: [irq 8]
    [ 0.477896] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.477971] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.478004] pnp 00:05: [io 0x00f0]
    [ 0.478018] pnp 00:05: [irq 13]
    [ 0.478088] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.478120] pnp 00:06: [mem 0xff800000-0xffffffff]
    [ 0.478195] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.478290] pnp 00:07: [io 0x0060]
    [ 0.478296] pnp 00:07: [io 0x0064]
    [ 0.478309] pnp 00:07: [irq 1]
    [ 0.478381] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.478508] pnp 00:08: [irq 12]
    [ 0.478591] pnp 00:08: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
    [ 0.478951] pnp: PnP ACPI: found 9 devices
    [ 0.478957] ACPI: ACPI bus type pnp unregistered
    [ 0.490613] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.490624] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
    [ 0.490636] pci 0000:00:1c.0: bridge window [mem 0x97000000-0x97ffffff]
    [ 0.490646] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
    [ 0.490659] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.490666] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.490677] pci 0000:00:1c.1: bridge window [mem 0x96000000-0x96ffffff]
    [ 0.490686] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
    [ 0.490699] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    [ 0.490785] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.490795] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.490801] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.490807] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.490813] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.490819] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 0.490825] pci_bus 0000:01: resource 1 [mem 0x97000000-0x97ffffff]
    [ 0.490831] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
    [ 0.490838] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.490844] pci_bus 0000:02: resource 1 [mem 0x96000000-0x96ffffff]
    [ 0.490850] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
    [ 0.490857] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.490862] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.490868] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.490874] pci_bus 0000:05: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.490975] NET: Registered protocol family 2
    [ 0.491194] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.492763] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.496040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.496845] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.496853] TCP: reno registered
    [ 0.496888] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.496928] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.497141] NET: Registered protocol family 1
    [ 0.497179] pci 0000:00:02.0: Boot video device
    [ 0.497561] PCI: CLS 64 bytes, default 64
    [ 0.497690] Unpacking initramfs...
    [ 0.645619] Freeing initrd memory: 3280k freed
    [ 0.648253] Simple Boot Flag at 0x44 set to 0x1
    [ 0.649320] audit: initializing netlink socket (disabled)
    [ 0.649348] type=2000 audit(1344044611.646:1): initialized
    [ 0.650151] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.654971] VFS: Disk quotas dquot_6.5.2
    [ 0.655106] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.655348] msgmni has been set to 3987
    [ 0.655898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.655980] io scheduler noop registered
    [ 0.655988] io scheduler deadline registered
    [ 0.656146] io scheduler cfq registered (default)
    [ 0.656446] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.656761] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.657026] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.657034] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.657043] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.657086] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.657093] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.657102] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.657340] intel_idle: MWAIT substates: 0x20220
    [ 0.657366] intel_idle: v0.4 model 0x1C
    [ 0.657372] intel_idle: lapic_timer_reliable_states 0x2
    [ 0.657377] Marking TSC unstable due to TSC halts in idle states deeper than C2
    [ 0.657457] GHES: HEST is not enabled!
    [ 0.657634] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.658723] Linux agpgart interface v0.103
    [ 0.658913] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
    [ 0.673701] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.673787] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.674156] mousedev: PS/2 mouse device common for all mice
    [ 0.674946] rtc_cmos 00:03: RTC can wake from S4
    [ 0.675230] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.675276] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.675405] cpuidle: using governor ladder
    [ 0.675548] cpuidle: using governor menu
    [ 0.675877] TCP: cubic registered
    [ 0.676148] NET: Registered protocol family 10
    [ 0.676630] NET: Registered protocol family 17
    [ 0.676643] Registering the dns_resolver key type
    [ 0.677148] PM: Hibernation image not present or could not be loaded.
    [ 0.677169] registered taskstats version 1
    [ 0.678178] rtc_cmos 00:03: setting system clock to 2012-08-04 01:43:32 UTC (1344044612)
    [ 0.678339] Initializing network drop monitor service
    [ 0.681784] Freeing unused kernel memory: 740k freed
    [ 0.682187] Write protecting the kernel read-only data: 8192k
    [ 0.688133] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.696908] Freeing unused kernel memory: 1588k freed
    [ 0.703289] Freeing unused kernel memory: 640k freed
    [ 0.726908] systemd-udevd[40]: starting version 187
    [ 0.731830] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
    [ 0.732096] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 0.732419] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 0.733743] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 0.740113] [drm] Initialized drm 1.1.0 20060810
    [ 0.743662] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 0.743683] ACPI: Power Button [PWRB]
    [ 0.743928] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.743947] ACPI: Sleep Button [SLPB]
    [ 0.744547] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 0.744652] ACPI: Lid Switch [LID0]
    [ 0.744933] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 0.744953] ACPI: Power Button [PWRF]
    [ 0.756097] i915 0000:00:02.0: setting latency timer to 64
    [ 0.833299] i915 0000:00:02.0: irq 42 for MSI/MSI-X
    [ 0.833375] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.833384] [drm] Driver supports precise vblank timestamp query.
    [ 0.833491] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 0.862865] fixme: max PWM is zero.
    [ 1.143446] [drm] initialized overlay support
    [ 1.162402] fbcon: inteldrmfb (fb0) is primary device
    [ 1.590260] Console: switching to colour frame buffer device 128x37
    [ 1.597027] fb0: inteldrmfb frame buffer device
    [ 1.597032] drm: registered panic notifier
    [ 1.896943] acpi device:28: registered as cooling_device0
    [ 1.897639] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 1.897663] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
    [ 1.897750] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.035973] usbcore: registered new interface driver usbfs
    [ 2.036030] usbcore: registered new interface driver hub
    [ 2.038013] usbcore: registered new device driver usb
    [ 2.041510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.041620] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 2.041632] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 2.041722] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 2.041784] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    [ 2.041808] ehci_hcd 0000:00:1d.7: debug port 1
    [ 2.045723] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 2.045779] ehci_hcd 0000:00:1d.7: irq 22, io mem 0x98204400
    [ 2.046541] SCSI subsystem initialized
    [ 2.055034] uhci_hcd: USB Universal Host Controller Interface driver
    [ 2.055957] libata version 3.00 loaded.
    [ 2.059558] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 2.061764] hub 1-0:1.0: USB hub found
    [ 2.061778] hub 1-0:1.0: 8 ports detected
    [ 2.062067] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 2.062076] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 2.062108] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 2.062184] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006080
    [ 2.062594] hub 2-0:1.0: USB hub found
    [ 2.062606] hub 2-0:1.0: 2 ports detected
    [ 2.062845] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 2.062853] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 2.062884] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 2.062947] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006060
    [ 2.063442] hub 3-0:1.0: USB hub found
    [ 2.063458] hub 3-0:1.0: 2 ports detected
    [ 2.063764] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 2.063773] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 2.063799] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 2.063867] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
    [ 2.064794] hub 4-0:1.0: USB hub found
    [ 2.064807] hub 4-0:1.0: 2 ports detected
    [ 2.065069] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 2.065077] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 2.065104] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 2.065149] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00006020
    [ 2.066077] hub 5-0:1.0: USB hub found
    [ 2.066091] hub 5-0:1.0: 2 ports detected
    [ 2.067288] ahci 0000:00:1f.2: version 3.0
    [ 2.067438] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 2.067534] ahci: SSS flag set, parallel bus scan disabled
    [ 2.067597] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 2.067610] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
    [ 2.067625] ahci 0000:00:1f.2: setting latency timer to 64
    [ 2.072121] scsi0 : ahci
    [ 2.077401] scsi1 : ahci
    [ 2.080638] scsi2 : ahci
    [ 2.082013] scsi3 : ahci
    [ 2.082537] ata1: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204100 irq 43
    [ 2.082546] ata2: SATA max UDMA/133 abar m1024@0x98204000 port 0x98204180 irq 43
    [ 2.082551] ata3: DUMMY
    [ 2.082555] ata4: DUMMY
    [ 2.366818] usb 1-4: new high-speed USB device number 2 using ehci_hcd
    [ 2.566765] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.567608] ata1.00: unexpected _GTF length (4)
    [ 2.568011] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
    [ 2.568018] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.569000] ata1.00: unexpected _GTF length (4)
    [ 2.569401] ata1.00: configured for UDMA/133
    [ 2.569721] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    [ 2.890091] ata2: SATA link down (SStatus 0 SControl 300)
    [ 2.906266] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.906536] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.906548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.906662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.955653] sda: sda1 sda2 sda3
    [ 2.956983] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.443860] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.080865] systemd[1]: systemd 187 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 4.268749] systemd[1]: Inserted module 'autofs4'
    [ 4.284427] systemd[1]: Set hostname to <D225E-Arch>.
    [ 4.722331] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 5.259898] systemd-udevd[99]: starting version 187
    [ 5.260136] systemd-journald[101]: Fixed max_use=99.8M max_size=12.4M min_size=64.0K keep_free=49.9M
    [ 5.260314] systemd-journald[101]: Reserving 22720 entries in hash table.
    [ 5.530348] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [ 5.594552] systemd-journald[101]: Vacuuming...
    [ 5.984762] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.984774] ACPI: Thermal Zone [THRM] (50 C)
    [ 5.993170] ACPI: Fan [FAN] (on)
    [ 6.008164] ACPI: Requesting acpi_cpufreq
    [ 6.055057] wmi: Mapper loaded
    [ 6.121135] ACPI: AC Adapter [AC] (off-line)
    [ 6.142771] coretemp coretemp.0: Using relative temperature scale!
    [ 6.316369] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x0
    [ 6.345709] iTCO_vendor_support: vendor-support=0
    [ 6.371317] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.387737] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 6.387775] acer_wmi: Function bitmap for Communication Button: 0x1
    [ 6.387788] acer_wmi: Brightness must be controlled by acpi video driver
    [ 6.388800] input: Acer WMI hotkeys as /devices/virtual/input/input7
    [ 6.471410] cfg80211: Calling CRDA to update world regulatory domain
    [ 6.479374] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x0
    [ 6.481722] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.598136] Linux media interface: v0.10
    [ 6.846985] ACPI: Battery Slot [BAT0] (battery present)
    [ 6.898714] Linux video capture interface: v2.00
    [ 6.940278] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
    [ 6.950439] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8
    [ 6.951134] usbcore: registered new interface driver uvcvideo
    [ 6.951142] USB Video Class driver (1.1.1)
    [ 6.988464] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 6.988790] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
    [ 6.989088] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 7.138145] ath: EEPROM regdomain: 0x65
    [ 7.138151] ath: EEPROM indicates we should expect a direct regpair map
    [ 7.138161] ath: Country alpha2 being used: 00
    [ 7.138165] ath: Regpair used: 0x65
    [ 7.163644] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 7.164540] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 7.165285] Registered led device: ath9k-phy0
    [ 7.165311] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90021440000, irq=17
    [ 7.453924] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 7.464934] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 7.465285] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 7.503962] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 7.576847] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 7.690199] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.929343] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 7.934282] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 8.072332] systemd-journald[101]: Received SIGUSR1
    [ 11.548644] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 18.667730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 18.770981] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 21.987214] wlan0: authenticate with 74:44:01:3a:8a:ae
    [ 21.994069] wlan0: send auth to 74:44:01:3a:8a:ae (try 1/3)
    [ 21.996123] wlan0: authenticated
    [ 22.003388] wlan0: associate with 74:44:01:3a:8a:ae (try 1/3)
    [ 22.007338] wlan0: RX AssocResp from 74:44:01:3a:8a:ae (capab=0x411 status=0 aid=1)
    [ 22.015634] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 22.015884] wlan0: associated
    [ 32.483399] wlan0: no IPv6 routers present
    Last edited by Pres (2012-08-05 22:06:43)

    Really puzzled by this one. I've tried playing around with a ton of different acpi options. Only acpi=off prevents this from happening. Also tried upgrading my BIOS to the latest version. Tried several different distros and they all had the same issue, so it's not specific to Arch.
    I've noticed the backlight stays off for exactly 10 seconds as if there is a 10 second timeout. If I could figure out where that is, might be possible to just lower the timeout.

  • General issues during Installation

    Hi Experts,
    What are issues generally we are facing during installation of data sources  and loading of data in to DSO or Cube.(with real time example).
    and how that can be solved?
    Regards
    Tapashi saha

    Hi
    Discussed so many times.
    While installing the BC DS based on the Data flow  the error occurs, Normally the Shortdump if you select much Object at Grouping with Dataflow before after based on the time lines.
    The Connectivity / RFC issues between the systems
    The Data Init fails due to data inconsistencies.
    Hope it helps and clear

Maybe you are looking for

  • Setting Expiration period for Maintenance Plan Backups fails to work in sql server 2008

    I have created a Maintenance Plan to do a nightly full backup and set the backup set to expire after 4 days in sql server 2008 R2. Weeks later, old backups are sitting on the hard drive.Please do the needful.

  • Don't use GET PERNR error

    Hello Experts, I'm trying to write a code using GET PERNR statement for every first time but keeps getting the error when try to execute my code. Here is the error (Do not use the GET PERNR event). Can somebody please help me rectify this error. For

  • Network connection drops on MacBook Pro

    I have a MacBook Pro 15 “ Unibody OSX 10.5.8 (have not yet upgraded to Snow Leopard) 2.53 GHz Intel Core 2 Duo 4GB Ram purchased in December 2008. This was my first Mac purchase having used only Windows PCs prior to that. My daughter has a nearly ide

  • Use of Smart Forms for Payslip

    Hi, I am trying to create the payslip using the HR Formular Workplace (TC HRFORMS) and Smart Forms. Has anybody has experience in that or where can I find information on that topic. I am working in release 4.6C. Thanks, Viktoria

  • Whatsapp and notification

    please i deleted my whatsapp and notification unknowly,i cant dowload them back.hw will i download both back?