Issues imaging HP 6445 laptops that have the Marvell Yukon 88e8072 network cards.

We are trying to image those HP 6445 laptops that have the  Marvell Yukon 88e8072 network cards in them.  They do F12 and get an IP Address.
They get the pending request ID, stating Config Manager is looking for the policy,
Then immediately they get Abort PXE and exiting PXE ROM.
I was able to find that resource ID, which had a completely different computer  name than what I was using…I deleted that and tried F12 boot…it came up with a different resource ID, which I went back and deleted, and again, a different resource ID pops
up. 
In between each of those I  tried the clear pxe requirement and the mac address search.  Every time I do the mac address search it comes up to none. Any suggestions?

Parvinder,
Are these laptops UEFI boot mode?  Enter the BIOS and set to legacy mode and try again
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Aperture replaces images with other images that have the same image number

    Help! Aperture has started replacing images in recent projects with older images from elsewhere on my hard drive that have the same image number. Obviously I need a better numbering system, but can someone help me figure out why this is happening? I store master files on an external drive and the "replacement" files seem to be coming from identically named images on my local HD or in iPhoto.

    I started renaming all of my images when I import them. I'm using referenced images to an external drive, although I still have a bunch of older images stored in the Aperture library under my old numbering system (which was basically whatever image number the camera generated)....need to move them all to the external drive but haven't had time.
    So here's the latest problem: Today, Aperture started replacing images in albums (referenced images with unique file names under my new system) with old images even though the file names weren't even remotely close. It also replaced the images with the preview for the old image (230 pixels wide). "Show master" showed me the preview for the old image, not the correct image.
    I tried forcing an update to the preview, but it had no effect. The real masters are intact on the external drive, but this is really scaring me. It happens out of the blue, right in front of me...I watch as my images appear to be replaced with random old images in Aperture. It appears to have nothing to do with file names, as I'm now using totally unique file names.

  • Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

    Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games. 

    Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.   

  • I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I am talking about the Ver 3 download link that came with the purchase email.
    That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
    Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
    If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
    /Applications/Aperture.app
    /Library/Application Support/Aperture/
    ~/Library/Application Support/Aperture/
    Leonie

  • Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem.

    Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot.  I have to shut the computer down the hard way!  when it comes back up, it is still either frozen or slow.  I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix.  It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything.  My iPhone and iPad are not effected as much so I end up doing what I can with them.  I've seen the blogs out there and understand that many have the same problem.  I have been waiting to read about a fix but I have found nothing!  Any ideas?

    Not enough free space on the startup disk can slow the system down.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    For startup issues...  open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
    And disable the Lion "resume" feature.
    Open System Preferences > General
    Deselect:   Restore windows when quitting and re-opening apps
    And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips

  • I see that there are people that have the problem suddenly almeer notes disappear this is with me also happened and now comes the: If I put a backup that I have my back than notes for 30 seconds back and THEN THEY DISAPPEAR again!

    i see that there are people that have the problem suddenly all notes disappear :
    this is with me also happend and now comes it
    when iputa backup that i have back than i kan see the notes voor 30 seconds and than the disappear again!

    Hello,
    Just to set your expectations...it's fine to "rant" about things here, but I do hope you are not expecting a formal reply from anyone at BlackBerry. For this site is not a channel for any formal communications with, escalations to, nor support from BlackBerry for any purpose whatsoever. Rather, it is a user-to-user community of volunteers who try to help each other out to the best of their abilities. Note this banner, please, posted at the top of nearly every page of the site:
    Consequently, words posted such as "WHAT THE HECK IS WRONG WITH YOU?" are actually directed at the other kind volunteers of this site, who may not respond in the most kindly of fashions. Hopefully, we all can understand that your rant is directed at BlackBerry (though, by placing it here, it is misplaced), but I just wanted to gently caution you about such posts, as well as ensure that your expectation concerning replies is properly set. Also, for new members who join the site, it's always good to have responses to such posts, covering the intended use of the site so that those new members can better understand such things.
    On the other hand, if you do desire assistance from other users for your issues, you might consider wording your requests in a manner that would motivate a kind volunteer to provide such.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Captivate 5 - issue with editing imported PowerPoints that have been resized

    I'm having an issue with editing PowerPoint files that have been imported into Captivate 5 when they have been resized within the Captivate project after the initial import.
    1. I import a PowerPoint presentation into 800x600 dimension.
    2. I resize the project to 900x600 by not locking the aspect ratio and selecting to position to the top right so there is a 100 pixel strip to the left of the slide that we use for navigation buttons and other info.
    3. If I need to make a change to a PowerPoint, I select Edit > Edit with Microsoft PowerPoint > Edit Slide (or Edit Presentation).
    4. The slide opens in PowerPoint and I make the changes and click Save.
    5. When the slide is imported back into Captivate, it is stretched and resized to not fit either 800x600 or 900x600, but something in between. This did not happen in Captivate 4 - the slide would retain the 800x600 dimension slid over to the right with no issues.
    Are there any settings that can be done to ensure the edited slides will import back into the project with the correctly sized dimensions for the current project?

    Hi there
    I agree that it would be nice to see a notification. You know, Captivate offers a special area for notifications that appear when you open it. I'm stymied as to why Adobe doesn't use this area for making such announcements.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • What is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

    what is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

    There is no key because that is an important dialog.  Why would you want it to go away?

  • HT5621 i buy a second hand IPAD and after restoring is shows the previous user apple ID and even i dont know the person that have the ID and now i want to use with my apple ID

    i buy a second hand IPAD and after restoring is shows the previous user apple ID and even i dont know the person that have the ID and now i want to use with my apple ID

    Without the previous owner's Apple ID and Password, you will not be able to activate the iPad.

  • Where I can check the internal table memory that have the system?

    Hi
    I have some jobs that cancel with this error:  No storage space available for extending an internal table.
    Where I can check the amount of space memory that have the system and if I can resolve this problem if I put a commit work or something like that?
    The dump stop when I make a import:
    IMPORT TIMES DHIST3 SUM3 FROM DATABASE MONI(DB) ID MONIKEY.
    Thanks for the help!

    hi,
    goto:
    sm04 - goto- memory
    A.
    Message was edited by:
            Andreas Mann

  • I have cross dissolve transitions set between images and videos, and I have the pan/zoom hold setting at "0." Despite the "0" setting, my images are static until the cross dissol

    I have cross dissolve transitions set between images and videos, and I have the pan/zoom hold setting at "0." Despite the "0" setting, my images are static until the cross dissolve is complete. I want the pan/zoom feature to start the moment the subsequent image becomes visible. Is there a solution?

    tonyproam
    I am not sure if I am zeroing in on what you seek so please clarify...on
    I want the pan/zoom feature to start the moment the subsequent image becomes visible.
    Do you mean fading in visible versus or completely visible at the end of the transition? Whatever the case, I have not
    found a scenario to fit what you are describing.
    However, here are my suggestions for you to consider...
    1. What is the alignment of the Cross Dissolve transition - Left Clip, Between Clips, or Right Clip. If Between Clips, please try Left Clip alignment.
    2. What is the duration of the Cross Dissolve transition - you could try varying the transition duration. If less than 1 second, then please read the
    details for minimum transition duration in the following
    http://atr935.blogspot.com/2014/03/pe-minimum-duration-for-transition.html
    Please let me know if any of the above worked for you in what you were seeking regarding pan and zoom effect and video transitions.
    Thank you.
    ATR

  • CV04N-Searching across multiple classes that have the same characteristics

    In CV04N- is there a way to search across mutliple classes that have the same characteristics?
    For example I created 3 new class types each assinged to a new class, each class having the same characteristics.
    Say if I have a characterisitics called Contract Name.  I need to be able to search for a contract name across all 3 classes.
    The search results in CV04N defaults to class type 017 so it only shows characterisitcs relate to that type, Is there a way to get the characteristics for the new created class types to show?
    I know in CV04N you can only search one class type and class at a time.
    Does anyone know of a way to fulfill these requirements, without creating a customized report?

    Hi Jenny,
    The answer for this question is that:
    1. The class 017 document management in cv 04n is SAP standard class .It's totally different than the new class created by you.
    2. The new class in CL02 you are creating is for a perticular document type. When you assign a characteristic (contract name) to this new class ,it appears in additional data field as contract name.
    3. Now you can make a search with only Contract name filed and the report will be displayed with all document types having this characteristic (Contract name) is assigned. Thus you can find the classes(document types)thru characteristic(contract name).
    I hope this will resolve the query. And you will get clarified between two classes( i.e. 017 and new classes in DMS).You can say them as subclassed under 017 class.
    Regards,
    Ravindra

  • Osb: Proxy Messaging Service retrieve only xml message that have the proper

    Hi All.
    I have a Proxy Service with Messaging Service type which read xml messages from a queue.
    The Request Message Type in the proxy is xml and I have provided the type information by declaring (in the element and type field) the XML schema type of the XML document exchanged.
    I need the proxy service to retrieve from the queue only the xml messages that have the proper schema.
    But when the proxy retrieves any xml msg in the queue regardless of their schema definition .
    Appreciate your input.
    Thx,
    Ross
    Edited by: user6677631 on Feb 25, 2013 9:52 AM
    Edited by: user6677631 on Feb 25, 2013 10:02 AM

    Selecting the XML schema for request type in a messaging proxy does not ensure the validation of incoming XML message against schema. Similarly if you create a WSDL based proxy the validation against WSDL definition will not happen automatically. Choosing XML as the type of message will only ensure that any malformed XMLs will be rejected before entering the message flow. For validating against schema you will need to explicitly add a validate action within the proxy message flow, if validation fails raise an error and roll back the message to the Queue or log the errored message and commit the message/publish to an error queue.

  • Query for retreiving table names that have the same data

    Hi,
    Does anybody know how to retreive all the table names that have the same data in their respective tables but i dont know the table names or its fields. Is there any possible query to perform this action???
    Thanks in Advance,
    Balaji.

    What about...
    WITH manager_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id
      AND   m.name = :P_MANAGER)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    ), all_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    SELECT a.*
    FROM   manager_list m,
           all_list a
    WHERE  m.employees = a.employeesWould be easier in 11g, but I don't have an installation here so this is based on 10g.
    Cheers
    Ben

Maybe you are looking for