Issues opening CS6 projects in Premiere Pro CC

My Premiere Pro CC takes a ridiculously long time to locate media from a CS6 project file, is this normal?

You should file a bug report with Adobe. I just did. I am experiencing the same issue on multiple machines with Creative Cloud licenses. I waited to upgrade until I was finished with my major active projects in CS6, but I'm not recalling projects from last year for a couple of clients, and I have to wait around for hours to re-link just a couple of files at a time. If I didn't need a few hundred markers and other project-specific things from those old projects, I would just re-edit the sequences based on my EDLs because that would be much faster than waiting for the re-link. Premiere CC supports backwards compatibility with CS6 project files (mine are just fine once I go through the hours of re-linking), and I never experienced a similar issue after upgrading from CS5.5 to CS6 early last year, so I think it's a bug.

Similar Messages

Trouble opening a project in Premiere Pro

Hello, when I try opening a project in Premiere Pro into which I have already putten a lot of effort I get the following message:
This project sequence could not be oppened. No sequence preview preset file or codec could be associated with this sequence type.
Could anyone please help?
Thanks a lot.

Hi Guiazevedo100,
Welcome to the forums.
Please check the below Forum link which addresses the same issue.
http://forums.adobe.com/thread/1016247
Regards,
Vinay

I want to open a project from premiere pro on my mac

I want to open a project from premiere pro on my mac,the project was edited on a different mac originally.
Some of the sound from the clips are missing and all the clips are there but when go to a clip in the timeline and press enter it is just black.
Please help!!!!!!
P.SIt also askes for RENDERED MFX FILES????

You may have to go to the original computer and go to the project manager which will let you gather all media to a single folder. Then take that folder to a new computer and edit away.
As far as black clips. If the media IS located but it shows up black during playback this might mean the file is damaged. This happened to me yesterday and when I opened the file outside of premiere it would not play at all.

Opening A Premiere Pro CS6 Project in Premiere Pro CS 5.5

I downloaded Premiere Pro CS 6. I already have Premiere Pro CS 5.5 on my computer. I had read you can open up a CS 6 Project in CS 5.5 by doing the following:
1) Saving your project file on your Hard Drive
2) Copy it just for back up
3) Right Click (Control Click) on the original Project File and open it up in Text Edit.
4) On the fourth row Change Version "25" to Version "24"
5) Save it.
I opened up Premiere Pro 5.5 and went to File (that I just changed to open in Premiere CS 5.5) - Open Project - and I then clicked on that file. It started to open up. When Premiere 5.5 was open this dialog box came up:
I clicked OK and everything opened up in 5.5 fine. It worked great. You can open up a CS6 project in Premiere 5.5.
What does this box mean? I installed CS 6 as is. I did not add any third party files or transitions or filters.
Thanks in Advance

this is the best piece of advice i have found. thankyou so much edwurd. I have premiere pro 5.5 and 6, I had to upgrade to 6 for some commercial work, but half my plugins have now gone into another dimension and 6 doesn;t see them these consist of red giant and new blue fx plugins mostly. These all work great in 5.5 premiere but of course with new projects now in 6 half of them cease to be seen by the plugin loader even though they are in the cache after 11 days of installing and reinstalling still no one can help. I had a huge project i was working layered with all these third party plugins that 6 didn't want to play with anymore, although it used to, I just tried your suggestion. and it worked perfectly, i didn't even get the error box the whole thing / 6 project / opened beautifully in 5.5 with all plugins functioning and happy. Thankyou again. you are a legend.

I can`t open My project in Premiere Pro

Hello !
When I try to Log my existing project in premiere Pro, There is a window that pop out with this message
"This preject contains a sequence that can not be open. No codec or file is associaetes and pre-establish for visulisation with this type of sequence.
(Sorry II have my Premiere in sapnish)
This problem happend to me before one week ago , but is happening again and I need this project. Almost finishing it.
I apreciate some help.
Thank you

This may help: FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Open 2 projects in premiere pro?

I have recently moved over to premiere pro from final cut. Is it possible to have 2 projects open at the same time?
Thanks very much.

Hi Kevin - thanks for the suggestion.
I note in the browser there is a "preview files" folder with sub-folders which have clips from other projects. It does look like some of the clip edits I made are carrying over. The main reason I need this sort of thing is that I have a number of very large files that were captured from video tape which I have cut up into master clips and then was able to drag them into other projects in FCP. If I can do this in PP I would be set.
What did you mean by "..."cs next".
Thanks again.
Ken Zaner

I can't open my project in Premiere pro CC ( error -600)

any suggestions on how to fix this it was working last night - now I cant open anythin - I have the cloud subscription.
a macbook pro
Mavericks
OS x 10.9.1
2.5 ghz intel core i5
memory 4 gb 1600 mhz DDR3

This may help: FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

Opening old Premiere Projects in Premiere Pro CS5

I have some old video projects which I've saved to disk with the idea that I could go back and edit them later. I just tried to open one of these old projects in Premiere Pro CS5 and it doesn't recognize the old Premiere Pro project. PP CS5 projects now end with *.prel or *.prproj. My old projects (some done in Premiere 6, some in PP CS) ended with *.ppj. I opened the *.ppj file properties and tried changing them from "Opens with Adobe Premiere Pro CS" to "Opens with Adobe Premiere Pro CS5", but it looks like the file suffix remains *.ppj and PP CS5 still doesn't recognize it.
Is there a way I can convert my old PP projects to PP CS5 so they can be opened/edited in my current software?
Thanks.
--Dave

David,
Per my earlier post, if you change that from All Supported Media to All Files, can you Import?
[Edit] I see that All Files did work, and that you are up and editing! That is great news.
As mentioned, the only issue that I had was with a very few 3rd party Transitions, and PrPro was nice enough to tell me exactly where these were used, and what their names were. I just wrote down those TimeCodes, added Cross-Dissolves to replace whatever the previous editor had used, and was up and editing.
Now, I did have to go through the "Where is file ____?" process, as the previous editor had drawn Assest from ALL over an external HDD, with no folder structures, or anything useful - what a kludge! I organized all of the Assets (many thousands) into logical order, and once I had re-established the links, all went beautifully.
Good luck,
Hunt
PS - the reason that I asked about platforms is that Pr was X-platofrm, but then with PrPro, through version 2.0, it was PC-only. It was not until CS3, that it went back X-platform. This created a little problem for Mac users, with newer PrPro versions, but older PC Projects. We get about 1 of these issues per year, and the answer is for the Mac user to befriend a PC-person, with the right version of PrPro, do that Import step, then Save_As, and hand off the now, X-platform version of the PRPROJ. Hey, it fosters "hands across the aisle," and we've found several PC-users, with the right versions around here, who have done that conversion, out of the kindness of their hearts. That had zero to do with your Project, but wanted you to know why I asked.
Message was edited by: Bill Hunt - Added [Edit] when I saw the last response.

After I saved my project in Premiere Pro, a few hours later I can't open my project anymore, what can I do?

After I saved my project in Premiere Pro, a few hours later I can't open my project anymore, what can I do?

We need waaaaaaay more information. Here's the stock request for info to provide: FAQ: What information should I provide when asking a question on this forum?
And here are essential particulars:
Win or Mac? Exactly which version?
Version of Premiere Pro -- the exact number as shown in the About box.
What exactly happens when you try to open the project? Do you get an error message? Does Premiere crash? Hang?
How exactly are you attempting to open it? By double-clicking on the project file? By launching Premiere and selecting the project from the list of recently opened ones? ...
Can you create a new project?

How to transfer an unfinished project from premiere pro 2014 to premiere pro cs6

Ok I a not too savvy with my new MAC or computers in general but i used to work with Power Director excellent product on my PC. So how do you transfer an unfinished project from Premiere Pro 2014 to Premiere Pro Cs6

Um ... by basically re-doing the project ... as there's SO much added to CC since the CS6 version, the tools have changed, the available effects have changed, the underlying code has changed ... there's just so much that CC can do that can't be done in the old CS6 version.
You can try exporting an XML and importing that into CS6 ... sometimes that works better than others, it hath been stated. This is sort of like trying to put a modern engine with all the computer controlled gizmos & pollution controls & fuel injection and designed to work with a 5-speed auto transmission into a 1965 Chevelle. With the older 3-speed manual tranny. How do you do it? Rebuild everything ... both the engine & the car. Lot of work.
Neil

How to send a project from Premiere Pro to be opened on another computer in FCP7?

The crux is I have this project in Premiere Pro CS5.5 which contains the original MOVs and time adjusted movs that I nested and turned into F4Vs, so it contains movs and f4vs with 1 aiff file and I need to send the work to the director(who has FCP7 and works on a Apple computer) so they can key out the green screen and grade it in FCP7. I prefer no to send 1 big file because there are lots of fast flickering cuts so would take alot of time to go through it pretty much frame for frame. So it would be eaier if they could view it as a project file in FCP7 like I can see it in Adobe Premiere Pro. I haven't done this before as you can tell but someone must of tried doing this before so how is it done?
My project settings in Pro are
Editing mode: DSLR
Timebase 25.00 frames/second
FRame size 1920 x 1080 vertical 16:9
Pixel Aspect Ratio: Square Pixels (1.0)
Display Format: 25fps Timecode
Sample Rate:48000HZ
Dispaly Format:Audio Samples
Video Previews
Preview File Format I-Frmae Only Mpeg
Codec: Mpeg I-Frame
Width 1920
Height 1080
Please help I really appreciate any advice, I've tried converting the f4vs into apple pro res but no video converter or media encoder will let me even if i imort the pro res preset.

Duplicate the project with referenced events onto the external hard drive.

Premiere Pro CC 2014 keeps freezing when loading projects from Premiere Pro CC

Hi everyone,
I'm reporting this issue in case someone else would have the same problem.
I just downloaded the 2014 version of Premiere Pro CC, and when I'm loading a project from Premiere Pro CC into CC2014 I have the software freezing and being unable to even play the loaded sequences. It seems that dynamic link is having trouble linking the CC and the CC2014 version of Premiere Pro.
Until now the only solution I found was to kill the process of the software and start it again, after 8 times I got my sequence loaded alright, then sometimes it is freezing again, killing process, starting software again, and so on. Does anyone has the same problem ?
I'm running a Windows 7 Ultimate PC with 12Go RAM dedicated only to Premiere Pro.
Cheers,
Vincent

Hi Vincent,
I feel your pain, you are not alone. Here are my machine specs and my very frustrating situation, if anyone has any idea as to how I should move forward, I would really appreciate the input/advice...
iMac - 27" Late 2013
Processor 3.4 GHz Intel Core i5
Memory 12 GB 1067 MHz DDR3
Graphics NVIDIA GeForce GTX 780M 4096 MB
Software OS X 10.9.4 (13E28)
I'm having similar issues that began when I installed Premiere Pro CC 2014, and actually got worse with the latest update/release. The majority of my projects worked fine at first, but the update last week ended that quickly. I did what I know I never should do and updated Adobe CC while completing a project on a deadline. I thought some of the fixes would help me complete the project sooner. Needless to say, the deadline has passed, my client is pissed enough to not pay me or hire me again and I'm stuck with an almost-there version that I can't export correctly because of this software. This is my problem, not Adobe's, but I didn't expect such a detrimental update to halt my operation.
After doing some research, I found that some plugins could be the cause of some specific editing issues, mainly due to incorrect or inaccessible folders - who knows if its Dynamic Link, CC apps or 2014 apps. I concluded that my issue at the time was a plugin permissions issue on the Adobe "Preference" Folder, so I reset the permissions on the folder so that CC and 2014 apps would be able to access its contents without any problems. This was the wrong decision. For some reason, resetting this folders permissions also effected the main HDD, it's Kernel Text files and their respective permission. I could not boot my machine, just got the Apple and spinning wheel until I had to power down. I ended up on the phone with 3 different AppleCare reps who helped me at least be able to turn the machine back on and access my desktop/files, apps, etc. Outside of this, no one could offer anything other than "Uninstall the problematic application, reboot, reinstall, etc..." or "Backup your files and reimage the HDD." When I mentioned the recent CUDA driver update for my graphics card (NVIDIA GeForce GTX 780M 4096 MB now running CUDA Driver Version: 6.0.51), it was like they had never heard of graphics cards being used in their machines.
Resetting permissions on Adobe Preference Folder...
This is what I read would get the CC and 2014 apps communicating correctly so that they could utilize my plugins. There is a problem, I believe, in that their are TOO MANY locations where Adobe folders/components live. There are 3 "Preferences" folders that I found, and I don't know which effects what process, but the folder I changed permissions on clearly effects the operation of all of the CC & 2014 apps I had installed, as well as my HDD. Kernel Extensions and the entire system.
Based on my perceived effects of the Preference folder, I needed to uninstall everything, run the Adobe CC Cleaner Tool, download/install just the 2014 releases and see if that resolved the issue. I'm not downloading CC apps, the 2014 releases should run fine on their own. I've yet to confirm this with Adobe, as what I've read has simply said to install the new release next to the CC apps, rather than on top of, as traditional update releases work. Anyway, one by one, I reinstalled the 14 apps that I use on a regular basis on a "clean" machine with no trace of previous Adobe apps.
After reinstalling (without any plugins), I was at least able to open Premiere Pro from the Application folder and work for a few minutes before both Program and Source monitors froze and had to force quit the app. If I try to open the Project File by double clicking it in the Finder, SpeedGrade opens up instead of Premiere Pro - never seen that before. I also had to force quit to end that process and reopen in Premiere instead of SpeedGrade.
So back to Premiere, if I do have success in opening a project in the right application, Premiere freezes - if not immediately, eventually it will just stop responding. The video clips, sequence segments and UI freeze, but the audio will keep playing until I force quit. When I force quit, Premiere Pro doesn't close entirely. The UI closes, but the process still runs. I've even force quit from Finder, force quit again from the Dock, Shut Down the machine, restarted and Premiere Pro will still be open, but "Not Responding", so I force quit again and open the project. Just now, I opened PP, made minor edits to a sequence, sent it to Media Encoder, exported, but the video I tested exported without audio. I force quite PP twice just before that and it is still running now, but again, it is "not responding".
Ultimately, none of this works, nor have my attempts at resolving these many issues. One thing I know is that there is something VERY WRONG with either the latest release/update to 2014 apps, the Preference folder or the permissions that were changed.
As I mentioned previously, and what I think is a major oversight by someone at Adobe, is that for some reason the permission changes to ONE Adobe folder also effected my entire system and Macintosh HD. Some Kernel Extension files went missing, which is never good and should not happen when resetting folder permissions, so I believe my issues are far greater than the faulty Adobe CC 2014 applications, and is the cause of many of my problems right now. If I can't get things sorted soon, I'm going to reimage my HDD and start from scratch. As much as I would like to avoid this, I really have no choice if I want to get back to work and not lose clients over inexplicable technology issues.
If I find a solution, I will repost, but I think Adobe has to make some serious fixes on this release before anything is resolved entirely. I pay them monthly and rely on their software and platform to work without issue, which is foolish - I know, but I've used CC since it was introduced and it has work well enough until now.
Is there anyone at Adobe that can offer some advice??

Codec issue with CS6 projects, not able to load

Hello,
Recent moved to the new Mac Pro
Was editing on it and it worked.
Thought I would update and now the Codec options are limited and the previous projects wil not open.
Any suggestions?
Thanks

Hi SummersPictures,
If you're having problems with sequence presets and codecs missing from Premiere Pro, see this document for solutions for this activation issue: http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premie re-pro.html
Let us know if that works for you.
Regards,
Kevin

Switching from Adobe Premiere Pro CS6 to Adobe Premiere Pro CC

I am currently renting Adobe Premiere Pro CS6 through the creative cloud. What all would I have to do to switch to Adobe Premiere Pro CC. Is there anyway to just switch from my current subscription with Adobe Premiere Pro CS6 to Adobe Premiere Pro CC. Or would I have to buy a whole new subscription to upgrade to Adobe Premiere Pro CC?

the acrobat dc installer will uninstall your acrobat pro xi. you'll see a warning when you start the installation.
i don't know if there's a migration issue but dc seemed to pickup my acrobat x signature and my recently opened pdfs. here's more info, https://helpx.adobe.com/acrobat/faq.html
i just watched a couple of videos about it and it looks very impressive.

Error Importing Premiere Elements project into Premiere Pro CS5

Hi,
I am working on a multi-part video project that I started in Premiere Elements 8. I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!). So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later. Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!). I'd like to import that project into CS5 if possible. The help documentation says this should be perfectly possible... but I'm having no luck.
When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal. But then as soon as it starts trying to open the project, I get this:
"The Project could not be loaded. It may be damaged or contain outdated elements."
I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested). Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
Am I stuck recreating the project from the ground up in CS5?

In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
Now, there are all sorts of considerations, for aspects that will not likely work:
Instant Movie/Themes, as PrPro cannot read those
Some Effects that PrPro does not have, like the NewBlue FX
Some Transitions that PrPro does not have
Some Title animation Presets, that PrPro does not have
Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
Good luck,
Hunt

Issues opening CS6 projects in Premiere Pro CC

Similar Messages

Maybe you are looking for