Issues with Custom Settings

Is anyone else having issues with custom settings on 10.8.2?
I am trying to configure basic office 2011 settings based on the keys located at http://afp548.com/mediawiki/index.php/Office_2011_Settings using a device group.
However, when I log into an authenticated user's machine and load pref setter I can see that the customizations are not found on the newly managed machine.  I know the push updates are working, but for custom settings I seem to be getting nothing.
My questions:
- Am I just flat our doing it wrong? (meaing, should the plist files be copied over)
- Are there common issues to look out for?
- Can anyone share basic custom settings they have that work?
Thanks!

Thats a bad idea. Office dos not react well to having it's prefences copied from one machine.
Check out: http://www.officeformachelp.com/office/administration/mcx/
It's a good guide for MS Office prefs.

Similar Messages

  • Issue with general settings

    Hi
    Has anyone had an issue with general settings where by you go into settings and then select 'general' and the phone dumps you back to the main screen. This happens every time and I now can not chnage a large number of settings. I have just updated with the latest operating system and it still has not fixed the issue.
    Any help would be appreciated.

    The next step is to restore your phone from your most recent backup, followed by syncing your iTunes content back to your phone. If that doesn't work, you'll have to restore as a new device in iTunes, but try restoring from backup first.

  • Issues with Custom Chart

    Hi,
    I am facing some issues with custom charts.
    1. X Axis value is getting cut off. Given date as x axis parameter and last 2 digits of date is getting cut off. (format like 19-Apr-2011T00:00:00). And this value cut of happening only for custom chart.
    2. On right click of the custom chart, when i am selecting Preview, it opens a new pop up window with and error as Error: "Application error occurred during the request processing.". No preview is being generated.
    3. In Server Scaling, i checked Use global auto scaling, and many times it is showing improper y axis or mutiple y axis values with the same value or it is displaying improper global range
    kindly help
    Regards
    Muzammil

    Muzammil,
    Without seeing your data and your chart configuration, it is difficult to understand exactly the issues you are encountering.  I have the same JRE and the same version and build of MII as you.  I have no difficulty with the scaling or with Global Range, but problems displaying the date in my tests.
    I would suggest the you enter a ticket into the SAP Support System, and enclose a  copy of your data (run the query, use Browser with Content Type = text/xml) and export a copy of you display template.
    Lastly, what type of query are you using - sql, tag?
    Kind Regards,
    Diana Hoppe

  • Issue with Visibility Settings for Backgrounds and Layers

    I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
    When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
    Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
    I was wondering if anyone else has run into this and has a solution, or has any recommendations.
    Thanks in advance.

    Hi setrev2012,
    How are you adding the backgroud?
    The only way I can think to accomplish this is via a watermark.
    The basics...
    Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
    Select a jpg or PDF of your background and adjust scaling options as desired.
    Then click the Appearance Options.. and uncheck the Show When Printing option.
    In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
    If you want a solid color background, just create a flat image of the background color for use as the watermark.
    If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
    Regards,
    Rave

  • My Apple TV drops out when my iMac isn't connected to wifi yet my TV is connected to wifi.  Also having issues with losing settings on Home Sharing as well.  How do I fix these issues?

    Whether I'm watching a movie purchased via my Apple TV or a movie stored on my iTunes app on my iMac I'm having constant issues with Apple TV either cutting out (randomly - not related to wifi) or not being able to access the 'My Computer' files when my iMac drops out the wifi connection because its in power saving mode.  I also have issues with 'Home Sharing' settings having to be reset and sometimes having to unplug the Apple TV power cord and plugging it back in to be able to successfully reset these settings so I can get back to watching whatever it was I was viewing on Apple TV.  My TV is connected to wifi as well so I'm wondering if there are any changes I can make in the settings of both my Apple TV and iMac or TV so that I can just select whatever it is I want to watch and be able to watch the entire movie or episode without it dropping out or having to keep flicking the mouse on the iMac to keep the computer connected to wifi?  I love Apple products generally but Apple TV is proving to be a pain in the a**e lately.  Hopefully someone can help me sort these issues out

    Intermittent issues will point to a local network/wifi issue.
    Reboot ATV and router, make sure both are up to date
    Try ethernet
    The home sharing connection will cut out if the iMac goes to sleep.

  • Issue with customer Incoming Payment

    Hi Gurus,
    I need your help related to an issue with Incoming customer payment. This is the first time I am doing this Incoming payment set-up. I have odne the payment program set-up for outgoing payments. I need to configure the automatic payment program for incoming payments. After the payment run is successfully executed, we need to create and send Idoc's to the bank. This process of payment run and Idoc creation is being used successfully for outgoing payments.
    From configuration side, I have created a new payment method and have set it up for incoming payments. I have selected ACH as format and PPD as format supplement. I did the bank set-up and have assigned a partner profile to it. I have assigned a reference key 17 in the SPRO-> Print->Payment media.
    The issue is that when I run the payment run for customer open item, the payment run is successful and the item gets cleared but no Idoc's are being generated. I have entered my House bank and account number in the variant as well. I am getting the following error:
    Step 001 started (program SAPFPAYM_SCHEDULE, variant &0000000000869
    No variants found for format ACH
    No Payment Media Created in Format 100
    I would really be thankful if you can help me in resolving this issue. I am not sure which step I am missing.
    Thanks,
    Best Regards,
    Shalu

    Hi Lakshmipathi,
    Yes the Document split has been activated. This issue is the specific one. We have different C&F location. Sales happens accross India. Hence we have created the Business area concept for each location to get the location wise balance sheet. I have also activated the zero balancing for Profit center and also Business area so that i can derive the Location wise Balance sheet.
    Now the sales invoice has been processed from C&F Location. Customer deposit the Cheque directly to the Head office Bank and not at the C&F Location bank. I don't want to clear the existing open item because 50% of the cheque gets bounced. So i am booking the incoming payment without clearing the open item.
    While processing the incoming payment user is entering the C&F location business area in the customer line item (Credit line item) and Head office business area for the Bank line item as the bank is at the Head office so that we can arrive the Balance sheet.
    Now system is not deriving the profit center for the customer line item even though the business area wise zero balance has been activated. Recon account field status group has market as optional for profit center but in F-28 i am not able to get the profit center field (Because it is balance sheet item).
    The Document type already been configure for Document split and the Recon account also categorised as Customer inthe doc splitting. I don't have any problem with document split other than this issue.
    For this issue anything can be done in the document split??
    Regards,
    Devendran

  • Issue with custom fields mapping from CRM to ECC.

    Hi all,
    I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
    But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
    But i didnt understand the concept of this custom function module. why is this been used?
    Could anyone let me know with an good example on how this has to be acheived.
    Points are highly awarded.
    Kindly reply me.
    Thanks,
    Kiran...

    Hi,
    Here you go,
    After you create custom characteristics.
    1. Do Assign category.
    2. Map contents.
    3. Double check your master catalog has the mapped content.
    4. Publish master catalog.
    As per your message, you are not having any error message during import, which tells me that you are one step to close.
    Cheers, Renga

  • Error creating custom reports. Permissions issue with custom reports

    I am having permission issues with reports. I am building a new Configuration Manager  2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
    I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
    Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
    I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
    When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
    I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
    Error: 229)”
    I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
    My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
    Question:
    Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
    Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
    What is the correct process for creating custom reports?

    I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
    That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
    it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
    Can anyone confirm that what i did is correct?

  • Issue with language settings and units

    Hello All,
    We are facing the issue where since yetsreday days our language sttings are not working anymore.
    The characteristics which were loading fine before suddenly started giving error and now there are lot of issue with the special characters.
    Since we have data in almost all the european languages and with the entries from there language specific keyboard therefore list of chars now cannot be maintained in the RSKC.
    We did a lot of verification and there was no changes done and no transport related to language settings was done.
    The settings maintained before was ALL_CAPITAL and it was working fine till yesterday.
    We have raised an OSS message with SAP but still wanted to know if anyone is aware of the reason.
    Thanks
    Ajeet

    Is this unicode issue ???
    Check the below thread :
    Loading data from Unicode R3 system to non unicode BW system
    Hope this helps.
    Edited by: Praveen G on Sep 16, 2008 3:12 AM

  • Issues with Custom Package in Lightroom 3...please help

    I am having issues with the custom package in lightroom 3. I am selecting diferent cell sizes (with different aspect ratios) and placing multiple images in these cells.
    On screen everything looks good, but when it actually prints some of these cells are coming out stretched!! For example, the 6x4 cell comes out fine (same aspect ratio as the original capture), but i have 2 x 1.5 inch cell whose image comes out stretched??
    The first thing I thought of was the "zoom to fit" option, but this is not present in picture package.
    Then I thought it perhaps it was something to do with the my print settins, but cannot find anything there.

    I am having the same issue.  I used a Matt Kloskowski print grid and when I printed it, or printed to file, some of the images in the 15 that were created in the template were distorted.  Some the faces became wider and some narrower.  Not just zoomed to fit.  On screen it all looks correct.  Many others on the forum where the template was posted don't seem to have this issue.  I created a template myself just in case that was it but I got the same problem as walenahs.  I tried to figure out what he had done but I didn't get it.
    I have attached the two images.  You can see the distortion in the second image on the top row (too narrow), and on the second row, the second in and second down, black and white (too wide).
    Thanks

  • Issue with custom receive Pipeline component

    I have been facing issue with creating a custom receive pipeline component. The Pipeline is to receive large file, if the file size is large it has to read the incoming stream to a folder and pass only some meta data through the MessageBox. The Execute method
    I am using is,
    #region IComponent Members
    public IBaseMessage Execute(IPipelineContext pContext, IBaseMessage pInMsg)
    if (_largeFileLocation == null || _largeFileLocation.Length == 0)
    _largeFileLocation = Path.GetTempPath();
    if (_thresholdSize == null || _thresholdSize == 0)
    _thresholdSize = 4096;
    if (pInMsg.BodyPart.GetOriginalDataStream().Length > _thresholdSize)
    Stream originalStream = pInMsg.BodyPart.GetOriginalDataStream();
    string largeFilePath = _largeFileLocation + "\\" + pInMsg.MessageID.ToString() + ".zip";
    FileStream fs = new FileStream(largeFilePath, FileMode.Create);
    // Write message to disk
    byte[] buffer = new byte[1];
    int bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    while (bytesRead != 0)
    fs.Flush();
    fs.Write(buffer, 0, buffer.Length);
    bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    fs.Flush();
    fs.Close();
    // Create a small xml file
    string xmlInfo = "<ns0:MsgInfo xmlns:ns0='http://SampleTestPL.SchemaLocation'><LargeFilePath>" + largeFilePath + "</LargeFilePath></ns0:MsgInfo>";
    byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(xmlInfo);
    MemoryStream ms = new MemoryStream(byteArray);
    pInMsg.BodyPart.Data = ms;
    return pInMsg;
    #endregion
    Here I want the xml to be dropped in to the File share Eg: E:\Dropbox\PL\send and and the entire message to be dropped in the folder Eg: E:\Dropbox\sendLarge. so in the ReceivePipeline properties i set like
    And in the send port the destination i give is E:\Dropbox\PL\send.
    The issue is both the xml and the message are getting dropped in to the same folder E:\Dropbox\PL\send and the message is not getting dropped in E:\Dropbox\SendLarge. Any help is greatly appreciated.

    using System;
    using System.Collections.Generic;
    using System.Text;
    using Microsoft.BizTalk.Message.Interop;
    using Microsoft.BizTalk.Component.Interop;
    using System.IO;
    namespace Sample.ReceivePipelineLargeFile
    [ComponentCategory(CategoryTypes.CATID_PipelineComponent)]
    [ComponentCategory(CategoryTypes.CATID_Decoder)]
    [System.Runtime.InteropServices.Guid("53fd04d5-8337-42c2-99eb-32ac96d1105a")]
    public class ReceivePipelineLargeFile : IBaseComponent,
    IComponentUI,
    IComponent,
    IPersistPropertyBag
    #region IBaseComponent Members
    public string Description
    get
    return "Pipeline component used to receive large file and save it ina disk";
    public string Name
    get
    return "ReceivePipelineLargeFile";
    public string Version
    get
    { return "1.0.0.0";
    #endregion
    #region IComponentUI Members
    public IntPtr Icon
    get
    return new System.IntPtr();
    public System.Collections.IEnumerator Validate(object projectSystem)
    return null;
    #endregion
    #region IPersistPropertyBag Members
    private string _largeFileLocation;
    private int _thresholdSize;
    public string LargeFileLocation
    get { return _largeFileLocation; }
    set { _largeFileLocation = value; }
    public int ThresholdSize
    get { return _thresholdSize; }
    set { _thresholdSize = value; }
    public void GetClassID(out Guid classID)
    classID = new Guid("B261C9C2-4143-42A7-95E2-0B5C0D1F9228");
    public void InitNew()
    public void Load(IPropertyBag propertyBag, int errorLog)
    object val1 = null;
    object val2 = null;
    try
    propertyBag.Read("LargeFileLocation", out val1, 0);
    propertyBag.Read("ThresholdSize", out val2, 0);
    catch (ArgumentException)
    catch (Exception ex)
    throw new ApplicationException("Error reading PropertyBag: " + ex.Message);
    if (val1 != null)
    _largeFileLocation = (string)val1;
    if (val2 != null)
    _thresholdSize = (int)val2;
    public void Save(IPropertyBag propertyBag, bool clearDirty, bool saveAllProperties)
    object val1 = (object)_largeFileLocation;
    propertyBag.Write("LargeFileLocation", ref val1);
    object val2 = (object)_thresholdSize;
    propertyBag.Write("ThresholdSize", ref val2);
    #endregion
    #region IComponent Members
    public IBaseMessage Execute(IPipelineContext pContext, IBaseMessage pInMsg)
    if (_largeFileLocation == null || _largeFileLocation.Length == 0)
    _largeFileLocation = Path.GetTempPath();
    if (_thresholdSize == null || _thresholdSize == 0)
    _thresholdSize = 4096;
    if (pInMsg.BodyPart.GetOriginalDataStream().Length > _thresholdSize)
    Stream originalStream = pInMsg.BodyPart.GetOriginalDataStream();
    string largeFilePath = _largeFileLocation + "\\" + pInMsg.MessageID.ToString() + ".zip";
    FileStream fs = new FileStream(largeFilePath, FileMode.Create);
    // Write message to disk
    byte[] buffer = new byte[1];
    int bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    while (bytesRead != 0)
    fs.Flush();
    fs.Write(buffer, 0, buffer.Length);
    bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    fs.Flush();
    fs.Close();
    // Create a small xml file
    string xmlInfo = "<ns0:MsgInfo xmlns:ns0='http://SampleTestPL.SchemaLocation'><LargeFilePath>" + largeFilePath + "</LargeFilePath></ns0:MsgInfo>";
    byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(xmlInfo);
    MemoryStream ms = new MemoryStream(byteArray);
    pInMsg.BodyPart.Data = ms;
    return pInMsg;
    #endregion
    Thanks Osman Hawari, for trying to help me out.

  • LMS 3.2 : issue with custom portal : high CPU

    Hi,
    Customer has a big issue with LMS.
    When he connects to the standard portal, it works fine.
    pdshow seems ok.
    But when he wants to work with custom portal (portal.jpg), it makes a long time to display information and when he wants select something it hangs.
    CPU is very high. He must stoped/restart LMS to have a normal CPU.
    I asked him to :
    - restart LMS, he made at 14h30
    - CPU was ok and he worked with standard portal withou problems but when he tried to put debug for portal CPU increase at 15h30:
    Common Services -> server -> Admin ->  CS Log Configurations: debug on CiscoWorks Portal, CiscoWorks portlets and CS Home
    Process which takes a lot of CPU is tomcat, you will find pdshow.txt, stdout.log and stderr.log.
    He tries to go to the custom portal but it hangs, you will find logs from debug : CSHomePage.log and CSPortal.log
    he sent me AAD.log because there was " high severity alert".
    Many thanks for your help,
    Elisabeth

    The most obvious problem is that DfmBroker is down.  Check to make sure tcp/9002 is not in user, then try a server reboot.  See if the AAD problems go away (and perhaps the CPU problem will as well).  If not, post the NMSROOT/objects/local/logs/broker.log.

  • Horrible Issues With Customer Service

    I have never in my life received such horrible customer service from a company.  I swear that in order to rectify the screw-ups of my order for my move, I had to call the customer service line NO LESS than 10 separate times, if not more, with a total of at least 9 hours on the phone (more likely 12), quite a bit of it on hold, and most often not during peak hours. 
    I had originally wanted my residential triple play service transferred, but was told I could only cancel instead of transfer.  After I was on the phone for an hour discussing the options, I was told that my bill would be $10 less per month than I currently have ($140 instead of $150).  I agreed to it, and was sent a receipt stating that I would be paying $175 a month, which was not what I was told, so I had to call in again, speak to another rep for an hour again, so I could get the same rate as I previously had. 
    Later, I wasn't told that I had to turn all my old equipment in; I thought I would just take it with me.  I received an automated email stating I would have to return all equipment otherwise I would be charged for holding onto it.  In order to clarify the situation, I had to call in again, and was on hold for ANOTHER hour, and was told nope, had to turn it in, unless I wanted another needlessly complicated situation by the rep.  And I was told I HAD to ship it in.  I later figured out on my own that I could go to a location to turn in the equipment. 
    I had originally wanted the service turned on the weekend of June 7, but was told they could not do weekends, so I scheduled for the 9th.  I called back later, still over 2 weeks out, changing it to the 6th, but was informed that the original rep had lied to me and said I could do it on the weekend.  So I scheduled that.  I got a call back later from another rep saying that it could NOT be done on the weekend, so I changed it again to the 6th this time.  Again, all these calls were at least a half hour to an hour each. 
    I found out later that the last customer service rep I spoke with didn't annotate that even though I was cancelling the TRIPLE PLAY package, that the phone was to be cancelled at the same time as the internet and tv.  So, one day before I move and the my service is shut down, do I get a call from customer service saying that Whoops!  Even though the installation was Friday, and it was currently Thursday evening (the 5th of June), because they had in their notes that the phone cancellation was on Saturday (Again, not what was confirmed with the last rep - they were all to be cancelled together), that they hadn't sent out the package with the required equipment.  I was justifiably furious.  I asked them to overnight ship it, and they stated they would.  That did not happen.
    I came home from work on Friday evening at 7pm, and did not see the shipment.  I checked the tracking link, and it said it wasn't even shipped. I had to call in yet again to ask the status, only to find *whoops* It hadn't shipped.  Thankfully, this was the first rep who actually followed through on what they said to me, and felt terrible about my situation (as I had, at the time, been on the phone for a combined minimum of 6 hours) and he gave me $20 off each month for a year.  I felt much better that I was actually taken seriously and that perhaps the issues might be over as soon as I got the equipment. 
    I finally did get it Monday afternoon and was able to set it up by Wednesday due to some issues with power at the house. After that, I kept having DVR box problems, and was again on the phone for another two hours in 2 days (at midnight, no less!) and it turns out, I had to bring in the DVR to trade it in, because I sure as heckfire was not going to wait another 3 days minimum to get a new one shipped out to me.  Once it was replaced, everything seemed fine. 
    Now, I'm having troubles paying my bill online.  Yesterday I spent my entire lunch hour on the phone with a representative who didn't understand my request, and so we went in circles, where he treated me like I was a **bleep**, as if I didn't know how to log in to the site.  I just want to pay my bill online, but my username is still linked to my old account and hasn't been transferred to my new account.  I prefer paying my bills online, and I am unable to do so, because of the inability of customer service to transfer my old account online to my current one.  The representative basically said he'd talk to the web team, but reading between the lines he gave me no guarantee that this would get transferred over.  I have never in my life had such a difficult time with a service.  I do realize that I have had some compensation for the time that I have had to take out of my life trying to get all of these issues fixed, but, in the end, this much effort on my part for this transition is completely unacceptable.

    This has not occurred.  I was sent an email this morning stating that my account was fixed, and for my inconvenience I got a free On Demand movie (which I don't care about).  I want to pay my bill online, but it's still set up with the old account.  If this does not get remedied by today, I will be bringing the entire situation up to the regional president.  This is completely unacceptable.

  • Issue withe customer workflow

    Hi,
    I have an issue with the customer workflow. as the user have an authorisation on XD02 but when the user double clicks on the workitem XD02 transaciton is not opens up. but manually user can go into the transaction XD02.
    Can anybody suggest me whats wrong with these

    Hi,
    when the user double clicks, wat appears, any message appears or is it removed from inbox, check the workflow log for the problem.
    Regards,
    JMB

  • Issue with custom toolbar button in alv and leave screen

    Hi,
    in one subscreen (say screen 100)i have an alv with custom ADD  toolbar button..so in the user_command event handler ,i call a antoher screen(dialogue)..like if i click on ADD button ,it should display dialogue screen(say 200) and after entering input in dialogue screen i click on CONINUE to retrun to screen 100..problem is for the first time i click on ADD button its working fine ,succesffyuly returned to screen 100...but for the second time i click on add button , i have to click on twice the CONTINUE button to retrun to screen 100..when debuggin i found the user_command event routin is executin twice ..any solution..
    Thanks,
    srini

    Apparently handler is set for every new ALV instance. This you get by executing CREATE OBJECT alv... every time PBO is raised. Ensure you are executing this statement only once duirng program lifetime. Then the system will match event handler only with one ALV instance (executing it once).
    if r_alv is not bound.
       CREATE OBJECT r_alv ...
       SET HANDLER ...
    endif.
    Regards
    Marcin

Maybe you are looking for

  • How to create a space on the volume for user in eDirectory ?

    hello, can I create and associate a limit on the volume of data with a Java API ?. I would like to do at the time that the user is created in eDirectory. What would my options?. I need to create a space on the volume and create a folder with the user

  • Transferring my i-Tunes to a new computer....

    This is the second time I am needing to do this. The first time was problem free. On my second attempt, my i-tunes library was successfully transferred, but I am not able to download the library on to my i-pod. A message indicated that I cant downloa

  • Query about the feauture in labview

    HELLO SIR, While performing 2-D FFT method of steganography in labview we do use flat command in it.My query is where do we find that command in labview? And  Why do we use that?                                                        Thanking you,

  • SQL Loader mystery, OWB 9.0.4

    Can someone please explain this to me? In my generated control file (from OWB 904) I get the following lines: INFILE '{{LOC_SOURCE_FILES.RootPath}}DXMTFIL.435' "STR X'0A'" BADFILE '{{LOC_SOURCE_FILES.RootPath}}com_com_mt_stg.bad' INTO TABLE "{{LOCATI

  • I cannot get rid of a tab/website even after removing/reinstalling Firefox

    I have a tab/website that I cannot close. Every time I try, I receive a large window that states "Are you sure you want to navigate away from this page? PRESS ESCAPE OR CLOSE THIS ALERT", then the site remains. I removed Firefow from my computer. The