Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

Similar Messages

Having issues with getting the slide to advance properly after audio is done playing

Before I describe the problem I will describe what I'm trying to do.
I have a slide that plays a video. When the video is finished the user clicks a Continue button, and a short audio clip plays, and then the slide advances to the next screen. The problem comes when I'm trying to integrate closed captions. Since CC is only allowed at the slide lever I created an advanced action that is intended to display the audio text and play the audio. The caption with the audio text displays fine, but one of two things happens with the audio:
The slide advances before the audio is done playing.
I add a pause action to the advanced action and the slide does not advance at all.
Does anyone have any advice on how to control the slide so it will advance once the audio is done? Thanks in advance for your help.

The Pause action WILL pause the slide if invoked. And there is no way to set the duration of the Pause in the Advanced Action.
I would suggest you add a button to the slide that the user clicks to go to the next slide. Add the short audio clip that you want the learner to hear to the On Success caption of that button and set the button properties to Pause for Success/Failure captions. You can add the CC text for the short audio clip into the success caption so that it appears as the audio is playing. As soon as the audio clip finishes playing the success caption will disappear and the timeline will continue to the next slide.
No Advanced Actions required for this solution.

How do I get print n share to work after upgrade to iOS 5. I can print from this app thru wifi. But it can,t print mail, web pages, etc..

How do I get print n share to work after upgrade to iOS 5. I can print from the app thru wifi and PC. However am unable to print mail, web pages, etc..
In mail when I try to print it just says can,t find air printers. It used to say print with print n share.

I sent e-mail to developer regarding this and they said that basically Apple has denied them access to the Airprint dialog in the new source code for iOS 5. So, the only way to print to pdf is to capture the e-mail or webpage in the internal apps within Print n Share. INHO, this really *****. Apple should make printing to pdf files just a standard feature of all their apps. If they don't do this, they are going to lose alot of business to the Adroid world as pdf file format is the business standard for all documents.

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

Where's the "Clear" button in Maps after upgrading to iOS 5?

Subject pretty much sums it up. After upgrading to iOS 5 I found that they seem to have removed the Clear button from the Directions feature. How can I clear a route in the updated version of the app? Thanks.

iPhone 5
Just wanted to add instructions on how to clear the recent routes history.
1 Open maps app. to view the actual map screen (not the route screen that shows the routing history).
2 Touch the little book icon in the upper right corner. Then you should see tabs at the bottom of the screen labeled "Bookmarks, Recents, Contacts".
3 Touch the "Recents" tab. Then you should see a list of the past routes you have looked up.
4 Touch the "Clear" tab in the upper left corner. Then you should see 2 options to either "Clear All Recents" or "Cancel".
5 Touch the "Clear All Recents" tab (shown in red). Then you should see the screen wiped clear.
6 Touch the "Done" tab in the upper right corner.
If you still see the very last route on your map: Then touch the "X" on the upper part of the screen, on the left side of the little book icon, located within the Search bar. Then you should only see the blue dot, representing your current location.
I hope this helps.

Why has my music controls in the locked screen stopped working after upgrading to ios. 7.0.2?

I cannot pause, advance track, etc with the in-control feature on ios 7. When my phone is locked and the music is playing, (ie. iTunes, podcasts or any other audio enabled app) the play controls do not work even when I access the in-control feature. I remember this working after I updated. Now it's not. Anyone else had this issues or know a fix?

I have the same issue. with iphone5 with iOS 7.0.2

My iPad Sleep/Wake button not working after upgrading to IOS 4.2.1

Since I uploading the OS system onto my iPad 3G, the Sleep/Wake button is inoperate. When I click this button, my iPad will not turn on (I press the Home button to activate my iPad). When my iPad is on and I press the Sleep/Wake button nothing happens.
I restored my iPad on iTunes which did not solve the issue. I have search this forum for any solutions and I have reviewed the iPad User to see if I miss something when I activated the update OS on my iPad.
Any other iPad users experiencing this issu? All recommendations is greatly appreciated.

Sorry, but I can't tell from your writeup how it is that you're actually using those controls. Some basic points:
A. Merely pressing the Sleep/Wake (SW) button doesn't turn the machine on if it's off. Instead, you press & hold it until the white Apple logo appears.
B. If you press Home and the machine comes to life, then it was not off, powered down. It was sleeping, or idle.
C. When on, pressing/clicking SW should put the iPad to sleep.
If you can't put it to sleep by pressing SW, and can't shut it down by pressing & holding SW until the red slider appears, then you have some sort of a fault involving that switch itself and you're probably looking at a hardware replacement. Follow instructions in your User's Guide to start that process.

Why my sound button isnt working after upgrade to ios 6.1.3??

I recently upgrade my ios. And found out after that there's a sound bug. My ihone sound isnt working at all... Can anyone help...?

iOS 6.1.3 has so many different bugs. I updated my iPhone 4S to this version and now my phone doesn't charge anymore. I and Apple Support technician believed that it's a software problem but they couldn't fix it at all and now I have to wait until the next update of iOS. So don't bother yourself just wait for the next update. Also, contact Apple Support Centre and open a case to report your problem because if it doesn't a common problem maybe they will not hear about it and your problem occurred in the next update again.

Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
I recently updated all software/firmware as follows:
1st Gen iPad - iOS 4.3 (8F190)
iTunes - 10.2.1 (1)
Remote - 2.1.1
I am using an iMac circa 2005 (6.1)
Mac OS X 10.6.7
2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
I have turned on Home Sharing on both iTunes and the Remote app.
I have made sure that both iMac and iPad are on same network.
I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
I have trashed the preferences for iTunes.
I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
I have reset the router.
I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
Installed Mac OS X 10.6.7 combo update.
Nothing seems to work.
iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
Anyone else having this issue?
Any solutions?
Thank you,

same issue iphone 4

Hi am having issues with getting the list of users from the Active Director

Hi am having issues with getting the list of users from the Active Directory, can anyone help me with this!

Hi Jason,
Try this:
1. In Ultiboard select Tools>>Netlist Editor>>Pins, press the Delete button
2. Select all nets in the Select the Net to Delete dialog and then press the Delete button. This will clear all nets in the layout, don't worry all traces, parts are still on the design.
3. Go to Multisim and select Transfer>>Forward annotate to Ultiboard. This will add all nets that you removed back and it should fix the pin problem
Tien P.
National Instruments

I have Windows 7 and PS Elements 10 and can't get the text button to work properly. What can I do?

I have Windows 7 and PS Elements 10 and can't get the text button to work properly. What can I do?

Try selecting the T tool and then doing a reset (see image below)

Issue with getting the entire spooled job into the pdf document

Hi All,
My scheduled job runs fine and completes successfully but it appears to have some issues with getting the entire spooled job into the pdf document which it sends to a an end user.Has anyone encountered it before.Your kind assistance would be appreciated.
Thank you.
Regards,
John

Hi,
Please read below link for your query:-
http://help.sap.com/saphelp_nw04/helpdata/EN/85/54c73cee4fb55be10000000a114084/content.htm
Regards,
Anil

Answer: to How can I get the reset button to work.

How can I get the reset button to work?: Answer
Thanks to everyone who helped on this. You are awesome. Especially Ned!! Posted here because I was unable to add more to the existing post.
Here is the question:
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/removeChild()
    at AddATree2/onReset()
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
Here is the answer:
//when you click the reset button everything is removed from the stage
    //except the star, baclground, and reset button (trees and greeting REMOVED)
    public function onClear(Event:MouseEvent):void
            if (tree3) removeChild(tree3);
            if (tree2) removeChild(tree2);
            if (webText) removeChild(webText);
            if (tree) removeChild(tree);
            clickCount = 0;

This is the answer to what to put in the onclear function.

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

HT5012 How do I get the meddle button to work on my iphone

How do I get the meddle button to work on my iPhone

I Cannot use the meddle button on my p
iPhone

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Similar Messages

Maybe you are looking for