Issues with loading some webpages and dropbox. OS X Yosemite Wifi

I am experiencing issues with my imac. As I was browsing Chrome this morning I went to load a page and suddenly it would not load and gave a page cannot be displayed error. Since then I'm having issues.
My wifi says it's connected and everything is working fine. I can load some pages but not others (this is across all browsers I've tried: Chrome, Firefox, Safari). My dropbox desktop client will not load, nor can I load my dropbox account online. Also when I quit dropbox from the menu tray and try and reopen from applications it does nothing.
My Google Drive desktop client and my google drive online is working perfectly though..
I have shutdown and restarted my computer. I have also reset the modem. Nothing changed unfortunately though.
I updated to OS X version 10.10.1 3 days ago. So maybe the update is partly responsible?
Any ideas?

Hello workingcars,
I would start your troubleshooting with the first article below and use the Wireless Diagnostic to help isolate and resolve the issue. You also may want to create a new Network Location to see if there is that resolves the issue. 
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/ht4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G. 

Similar Messages

  • Issues with loading master data and hierarchy from BI InfoObject

    Hi,
    I was successful with loading the master data from BI InfoObject. It copies the text node as well but it discards the space I have in the technical name when it copies it to BPC. For example if my Text Node technical ID is "NODE 1" it copies it as "NODE1" on BPC side because of which my hierarchy load fails as it is not able to find "NODE 1".
    What is the reason it deletes the space from technical ID? and how can I resolve this issue?
    Do we have a provision to write a ABAP exit where I can check?
    (PS: If i manuallay enter space on my BPC dimension the hierarchy loads successfully)
    Thanks in advance,
    Diksha.

    Hi,
    You can check this in start routine which can be called from Transformation file using BADI.
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm
    Hope this helps...
    regards,
    Raju

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Issues with load from Excel

    Dear all,
    I have issues with loading the data from excel.
    My excel file looks like this:
    Time
    Store
    Neto_prodaja_ACT
    Neto_prodaja_TAR
    Jan-12
    C1
    16
    16
    Feb-12
    C1
    2
    2
    Jan-12
    C2
    1
    1
    Feb-12
    C2
    3
    3
    My procedure for load is:
    CLEAR STATUS 
    Across Var Down Time, Store
    Sel Neto_prodaja_ACT, Neto_prodaja_TAR
    Sel Store Input
    access lslink
         connect test1
         select * from my_list
         peek only 10
         read
    end
    When I load the data I receive following error:
          Time                         Store Neto_prodaja_ACT  Neto_prodaja_TAR 
        1 01/01/2012                   C1 16.00             16.00 
        2 02/01/2012                   C1 2.00              2.00 
        3 01/01/2012                   C2                                                                                                                                                                                                                                                                       1.00              1.00 
        4 02/01/2012                   C2 3.00              3.00 
    4 Record(s) Read, 0 Record(s) Skipped.
    DAT096:
    Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_ACT
    DAT096:
    Unexpected Dimensions in ACROSS/DOWN List For Variable NETO_PRODAJA_TAR
    The loaded data looks like this:
    The data for store C2 is loaded also on store C1 so everything is messed up.
    I also have a question regarding dimensions.  I have a model in PAS which has data from different data sources (BW and excel). In excel I have dimensions which are not loaded from BW (they don't exist there). How to create such dimenison?
    Thank you a lot in advance.
    Best regards,
    Petra

    Petra,
    The Forum isn't really designed as a training system but rather where people can share questions or get a separate pair of eyes to look afresh at issues that aren't working for some reason. This is particularly the case for something which is as important as creating dimensions.
    The idea of the SSM Cube Builder/Model Designer was to enable people to build models with their relevant dimensions and metrics for demos and simple initial systems using manual data entry. If you are getting into building dimensions that will be outside BW then you are moving into the implementation arena rather than demo creation and need to work carefully so that things tie up.
    I doubt people would expect to be able to set up/implement BW without training and SSM is the same.
    If you would like training or would like to collaborate on a first project to enable skills transfer then my colleague Pedro and I would be happy to discuss this. We have done this with other people and it has worked well.
    Regards
    Colin

  • However, we've had issues with other legacy systems and programs for outlook

    I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
    related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
    so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
    issue.

    Will:Hi! Hi!
    I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
    http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
    May the force be with you!

  • Constant security issues with gmail in firefox and no words on buttons.

    I have firefox 10.0.02. I did a clean install on my system and installed bitdefender immediately afterward. I have been having constant security errors since then with regards to SSL certificates. I will get the error messages for invalid security certificates constantly, but only with a few sites (mozilla add-ons and gmail/google images sites specifically). Additionally, some of these sites will only load in plain text without styles as opposed to html. Finally, often gmail, or google images will have issues with loading certain artifacts, such as the test on the forward reply and other buttons in gmail, and the images in google images will often not load with only grey rectangles instead. Bitdefender's root certificate will also not install, despite constantly prompting to close firefox and install, which I occasionally let it do, with no result.
    I've tolerated this problem for several months now, but now that I am working on a business and a website constantly with multiple email accounts, it is getting completely frustrating.

    You need to take that up with Bitdefender support or uninstall that program if you can't make it to work properly.
    *http://www.microsoft.com/security_essentials/default.aspx

  • Performance issue with loading Proclarity Main Page..

    Hi All,
    I have Proclarity 6.3 installed on a Windows 2008 R2 OS. The Proclarity Reports was working well until last week. From last few days I am seeing a slow response time in loading the Proclarity Main page. 
    Loading Proclarity Main page on Internet Explorer 8 is taking 150 seconds and the same Proclarity Main page is loading on Google Chrome in 30 seconds.
    Have any of you faced similar issue ? 
    Already below things explored
    1. Clear Cache on PAS Tool
    2. Event Viewer, Noticed if there is any error or warning
    3. Tried browsing the Proclarity URL from server itself ( still the performance is slow)
    4. Memory consumption validated on server side. MSSQLServer was consuming more space. Hence restarted /. After restart also same issue ( with loading main page in IE ONLY)
    5. Checked drive space .. All drives has minimum 1.5 GB of free space
    6. Cleared up Proclarity Event Logs 
    The issue is NOT ONLY with loading Main page.. Navigating to any further web pages in Proclarity STANDARD and PROFESSIONAL version is responding VERY slowly.
    The only other option, that I am thinking now is RESTARTING THE WINDOWS SERVER. Which may not be a easy deal SINCE ITS A PRODUCTION SERVER.
    But the loading of web page on Chrome is 30 seconds and on IE its 150 seconds ( i.e, 5 times more..) .. So does proposing to restart the server makes sense ? 
    Any help, suggestion , thoughts on what I am facing.. ? Thanks 
    Regards,
    Aravind

    <b>onInputProcessing for two pages</b>  
      DATA: event TYPE REF TO if_htmlb_data.
      event = cl_htmlb_manager=>get_event_ex( request ).
      IF event IS NOT INITIAL AND event->event_name = 'button'.
        navigation->goto_page( event->event_server_name ).
      ENDIF.
    page1.htm
      <%@page language="abap" otrTrim="true"%>
      <%@extension name="htmlb" prefix="htmlb"%>
      <htmlb:content design="design2003">
        <htmlb:page>
          <htmlb:form>
            <htmlb:button       text          = "next"
                                design        = "NEXT"
                                onClick       = "page2.htm" />
          </htmlb:form>
        </htmlb:page>
      </htmlb:content>
    page 2
    <%@page language="abap" otrTrim="true"%>
      <%@extension name="htmlb" prefix="htmlb"%>
      <htmlb:content design="design2003">
        <htmlb:page>
          <htmlb:form>
            <htmlb:button       text          = "Page 1"
                                design        = "PREVIOUS"
                                onClick       = "page1.htm" />
          </htmlb:form>
        </htmlb:page>
      </htmlb:content>
    above will work fine.
    another way :
    you can define a global variable in your application class and subsquently change its value according to your requirement as the name of the page
    and whenever you want to move to some page. jaust assign on onclick event of the button:
    navigation->goto_page(global_variable);
    where global variable is the variable you have defined.
    hope this works for you.
    if not reply
    regards,
    Hemendra

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • Fire fox loads some websites and not others. Clearing cache and history doesn't help.

    Fire fox loads some websites and not others. Pages that don't load in Firefox do load in other browsers. Clearing cache and history doesn't help.
    One of the websites that doesn't load is google.com! It loads some of the page, just some menu items at the top of the page. Then, it hangs and remains in the Loading state (with the spinning wheel and "Loading" in the tab) indefinitely.
    The problem started after 3.6.11 was installed. I'm on Mac OS 10.6.4.
    I would be happy if you just showed me where I can download 3.6.10. Also, is there anything special I have to do if installing an older version?

    I ended up going into the clear history settings and setting it to clear history when Firefox closes and chosing it to clear history and cooking and browsing history when Firefox closes. Now the links work fine and the last page I was looking at before I closed Firefox is no longer there when it opens again. Problem solved!

  • My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

    My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

    You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
    Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
    http://www.f-secure.com/weblog/archives/00002300.html
    (I have ClamXav set to scan incoming emails, but nothing else.)

  • Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

    Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process.  The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/  It seems to go through the whole install process until the startup where it crashes.  I downloaded PSE 11 and at least it starts up but I haven't used it to do anything.  Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
    At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
    Very sad

    Barbara,
    Yes, I accessed the "updates" menu from the Help pull-down menu.  I also accessed the updates using the Mac Terminal application with results shown in my original post.  Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
    Update Failed
       Updates could not be applied
       The error log file may help you in identifying the problem.  The, try updating again.  If the problems persist, contact customer support for further assistance.
      The error log file read as follows:
       Photoshop Camera Raw 8.5
       There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
       Looking at the the output of the Mac Terminal app, it shows:
       ... hdiutil: attach failed - no mountable file systems
       Is this relevant?
    Regarding your follow-up message pointing to:
    Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
    the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
    Thanks

  • Are there any issues with Adobe Photoshop CS5 and OS X Yosemite 10.10?

    Are there any known issues with Adobe Photoshop CS5 and OS X Yosemite 10.10? I heard I would need an older Java version to start it.
    [ spammy links removed by admin ]

    You'll need to reinstall Photoshop CS5 after installing the MacOS 10.10 update -- for some reason the OS updater stomps on some of the Photoshop files.

  • Any known issues with Essbase 64 bit and other components as 32 bit

    Hi Everyone,
    Are there any known issues with 64 bit Essbase and other components (Planning, EAS, Provider services, EAS, Workspace and Reporting) in 32 bit?
    Version is EPM 11.1.1.3
    The reason for choosing ESSBASE 64 bit is of course performance. We decided to stick to 32 bit for the web applications due to some known issues and bitter experiences in past in this version with 64 bit web deployments.
    OS is Windows 2003 Server (64 bit for the ESSBASE server and 32/64 bit for the application server)
    Thanks,
    Sayantan

    Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

  • Issue with JMS inbound Adapter  and Asynchronous BPEL

    Hi Gurus,
    I am facing the below issue with JMS inbound Adapter and Asynchronous BPEL .
    I have 2 JMS Queues one inbound and one outbound . The Composite has multiple BPEL Components around 4 on an average and i have 4 composites similar to that .
    Totally 4 Composites * 4 BPEL Components = 16 Services
    Propoesd Solution :
    I have used MessageSelector in the JMS Adapter for selecting the incoming message. The BPEL gets invoked if the message selector is true and proceses the Message and writes the response to the other Queue.
    Initially i had no problems but intermittantly the BPEL processes are getting invoked but they are not processing the data ( Bpel process is supposed to invoke an external service and get the response in a sync call) and each BPEL processe instance is in running state for ever . This remains even if i restart the servers .
    The message gets read by the JMS Adapter , BPEL instace gets created but it wont proceed futher and remains in the runnign state for ever.
    If i redeploy the Composite then messages get processed but the issue creeps up again ( i tried to checl the logs but ino cluea about the issue .
    Getting frustrated day by day tried the bpel.config.transaction, increased the JMS Adapter threads , inreased the worker threads but all in vein..
    please let me know if any one has faced similar issue .
    Anticipating a quick response from the gurus.
    Lakshmi.

    We are also facing this issue in 11.1.1.5.
    Breifly the issue is : The BPEL process which polls an inbound JMSAdater ( consume_message) either stays in running state forever ( whatever we do) or go to the recovery queue. It doesnt recover even if i try to recover it. This happens intermittently. Redeploying the application / restarting servers sometime solve the issue but as know we cant do that on prod systems .
    Can some one look into this on priority and help us giving a solution/workaround.

Maybe you are looking for