Issues with only certain users under AD Auth

Tim,
     I wanted to find out of new copies of install documents for JAVA AD Auth and SSO for Windows.  I have one from mid 2008.  I have customer that is having a ON again OFF again issues with certain users.  See error below
While processing an AS request for target service krbtgt/ROMAMOULDING.COM, the account dbowman did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 3). The requested etypes : 17. The accounts available etypes : 23  -133  -128  3  1  -140. Changing or resetting the password of krbtgt will generate a proper key.
I am running BOE Edge 3.1 w/ FP 1.2
Thanks Kindly,
Ajay Gupta

Old post but since there was no answer and I have that case recently : here are some clue.
your environnemnt is  the state describe here: The security principals and the services that use only DES encryption for Kerberos authentication are incompatible with the default settings on a computer that is running Windows 7 or Windows Server 2008 R2.  http://support.microsoft.com/kb/977321
external similar post( (http://www.networksteve.com/forum/topic.php?TopicId=5574 http://social.technet.microsoft.com/Forums/en/winserversecurity/thread/ecf15eb9-26cf-483b-b1e3-1b1c7e4901e8 )
You should consider to apply the Microsoft fix on the 2008 Domain controller(s).
http://support.microsoft.com/kb/978055. FIX: User accounts that use DES encryption for Kerberos authentication types cannot be authenticated in a Windows Server 2003 domain after a Windows Server 2008 R2 domain controller joins the domain
cheers
Christophe

Similar Messages

  • Remote control issue with only some users

    I'm having an issue that I can't seem to find any reference to anywhere.
    Our client has two servers. One is Server 2003 and is running AD, the other is 2008R2 and is running terminal services.
    When I create a new user in AD, if I set the option in AD to allow remote control, do not require permission and interact and I set these options before the first time the user logs into the terminal then I can remote control that user's session without
    a problem.
    However, if I leave the defaults in AD to allow remote control but require the user's permission and the user logs into the terminal the first time with permissions set like that then forever more I can never remote into that user's sessions. Changing the
    options in AD later to not require user's permission no longer helps. When I try to remote into that user's session the user does not get a pop-up requesting permission, rather I just get an Access Denied message. If I try to shadow via an elevated command
    prompt I get error 317. I haven't been able to find any differences in GP or the registry between users that I can shadow and those I can't. Some setting specific to each user is getting set on first login that can't seem to be undone by changing the settings
    in AD. Where might I find this?
    Thanks!

    Hi,
    Thank you for posting in Windows Server Forum.
    Please check that you have added user under “Remote Desktop User” local group. In addition they are
    added under GPO setting “Allow logon through Remote Desktop Services” and
    not added under “Deny logon through Remote Desktop Services”.
    You can check the setting under below mention path.
    GPO_name\Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment
    More information:
    Allow log on through Remote Desktop Services
    http://technet.microsoft.com/en-us/library/dn221985.aspx
    In addition please check that you are not limiting in number of users who can connect simultaneously and also verify Remote Desktop Services Logon rights. Please check beneath article for additional details.
    Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
    http://support.microsoft.com/kb/2477176
    Hope it helps!
    Thanks, 
    Dharmesh

  • Issue with Active Directory User Target Recon

    Hi ,
    I am facing an issue with Active Directory User Target Recon
    My environment is OIM 11g R2 with BP03 patch applied
    AD Connector is activedirectory-11.1.1.5 with bundle patch 14190610 applied
    In my Target there are around 28000 users out of which 14000 have AD account (includes Provisioned,Revoked,Disabled accounts)
    When i am running Active Directory User Target Recon i am not putting any filter cleared the batch start and batch size parameters and ran the recon job .Job ran successfully but it stopped after processing around 3000 users only.
    Retried the job two three times but every time it is stopping after processing some users but not processing all the users.
    Checked the log file oimdiagnostic logs and Connector server logs cannot see any errors in it.
    Checked the user profile of users processed can see AD account provisioned for users
    My query is why this job is not processing allthe users.Please point if i am missing some thing .
    thanks in advance

    Check the connector server load when you are running the recon. Last time I checked the connector, the way it was written is that it loads all the users from AD into the connector server memory and then sends them to OIM. So if the number was huge, then the connector server errored out and did not send data to OIM. We then did recon based on OUs to load/link all the users into OIM. Check the connector server system logs and check for memory usage etc.
    -Bikash

  • Password protect/disable printers for certain users under ML 10.8

    I am looking for a solution to prevent my youger pupils to print everything without asking me. Is there a solution to protect/disable printers for certain users under ML 10.8 ?

    Ok. The sharing interface is not robust enough (by itself) to password challenge print jobs. You may need to look at another printing technology known as CUPS. Apple created this for advanced print configuration, and it does offer Kerberos security with printing password challenges. I do not know if OS X server offers more granularity in configuration.
    I won't be able to help you with the following as I do not use the CUPS printing solution here.
    In Safari, type in the following and press return.
    localhost:631
    You will see a tabbed browser interface. And a bit of light reading ...

  • How do I boot with a certain user in-control?

    Duh.  Maybe I am suffering a lapse mentally.  But my question is my Subject, please:  "How do I boot with a certain user in-control?"  I set Users as I want, then I re-start, but I use the older user, still.  So I feel perplexed, which is not good.  :-(
    I feel Frustrated at trying to _download_ Mavericks.  More than two-weeks I've seen:  "Your request is Temporarily unable to be processed.  Please try again later."
    [On my iMac, I am trying to create a new account to use to try to get Mavericks.]  Thank you.  :-)

    Well, depending on your current OS version, what you need to do is to switch user at the login screen.  On Lion, there's a switch user icon to click on.  Switch user then log in.
    But I don't think that will fix not being able to download Mavericks, though I guess it's possible.  If you already have an Apple ID and account, you want to be careful about associating multiple IDs with different apps, video, music, etc. on your system.  That can result in problems, as Apple IDs can't be consolidated.

  • Allow All Users To Add List Items But Only Certain users To Edit Them (SharePoint 2013)

    How do we allow all users to add items to a list, but only allow certain users to edit the list items? Site is SharePoint 2013. We have tried creating custom permissions. That does not seem to work.

    I've setup a custom list on my SharePoint Foundation using a custom permission level to accomplish this.  I setup a custom permission level on the site called 'Add Only to Lists'  which allows adding an item to the list and setup the group with
    the default read and the custom permission level and it works.  The users in the group get the add item but do not get edit item, not even items they created themselves.
    Any users who should have full edit permissions can be setup under the normal edit/contribute/design permission level and work normal.
    Below is the Role Definition pulled via PowerShell and Role Assignments on the list in question.  As well as a picture showing what it looks like to something assigned that role level.
    Role Definition
    Name : Add Only to list
    Description : Can add items to a list but cannot edit or delete
    Type : None
    Hidden : False
    Order : 2147483647
    BasePermissions : ViewListItems, AddListItems, Open, ViewPages
    List Role Assignments
    Member : Home Visitors
    RoleDefinitionBindings : {Read, Add Only to list}
    Parent : IT Equipment Request
    ParentSecurableObject : IT Equipment Request
    The user can create a new item, but cannot edit items - not even items he created.

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature">3082019206092A864886F70D010702A08201833082017F020101310B300906052B0E03021A0500300B06092A864886F70D0107013182015E3082015A02010130373023311330110603550403130A545247315343434D3032310C300A06035504031303534D5302106C6A0DBD0066FA9642BBD3DB95A990CD300906052B0E03021A0500300D06092A864886F70D01010105000482010042A5446464A1253E1A8D831E124760EAAF9ABAEB8627D5066402ADA9E5EBF22032BD329C6DCEC93506E122ED6D43064E57504C60DEAD096C14F5873C03659B99660F7F037AE8B326F5A5AAD5D04E2FAFDE6BBE99B4226F1B45437D1214585783F2CC92E332045586025E1577F90B15EF16A18EBC10EE029550C3FF0255C74BC373E06851692D090B589FFAA2E2C427CE5687D04F31FE45D738D027F5357E03901E075A0AE9ECD9E5FA90A9AF7470A1877FFC6AD9DE2AAFE6717FB0237A59ACF8C96C797A5C83985F58B3EFD376F8BD29ABEA613B33B3CCEE9160697A83F6503FCF9BD12FFE1234ACF3A58EB7A0DB61915B5C543BB6A9D34491F281BAB589C55E</Property><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • How to get list of Users under an Auth Group (for executable Programs)?

    Hi experts.  I have a requirement to get a list of all users under a particular Auth Group for Program Objects.
    Goal of this requirement is to identify the users allowed to use/access a program - we're doing some sort of Program Inventory and we'd like to identify the users per program, via the Auth Group. 
    So question is:  Which tables hold data about Program <-> Auth Group <-> Users, and how are they linked?
    I know this is Basis/Security stuff, but I was thinking of developing a report program to output the information needed.
    Thanks in advance.
    Edited by: George Esquerra on Nov 17, 2011 10:24 AM

    This is available in the standard via tx SUIM - user - users by complex selection criteria - by authorization values.
    If you enter auth object = S_PROGRAM and value = auth group, you will get the list of users.
    You can analyse how this program finds the information and incorporate it into your own logic.
    Thomas

  • Issue with Network Home Users on Mountain Lion ( connecting to Lion Server)

    I have been forced to setup a network user on a new mac running mountain lion because their old mac just went pop, and have run into multiple issues that I have narrowed down to them being a Network User on Mountain Lion.
    1. Contacts get deleted whenever you open Mail. Mail will hang on fist launch until all your contacts in Contacts (I hate the new names! ) get deleted, console shows that the location for the address book database is invalid, seems to be an issue with ~/Library/Containers/apple.mail.com folder
    2. Word documents with images in the background do not display correctly, there is a giant red cross through the document
    If I change this network user to a mobile home user the problems go away and everying works as expected

    How to re-enable the Apple-provided Java SE 6 applet plug-in

  • Issues with only one group call.

    I am having an issue joining one call group. I did not have this issue until a day or so ago. I multiple people in the group on my friends list. The people that usually lead the calls are all on my friends list. When I try to join it goes through the steps then drops me. A voice comes up telling me that the person I am trying to reach is not available and it has me leave them a message. This is the only group I have issues with. We tried making another group, it worked fine. I can call people and people can call me. I am not sure what the issue is with the lone group. Anyone have any ideas about this?

    First... You are not making your boot drive the share point are you????? Only share an entire drive if the drive is ONLY used for data (not OS).
    You need to make mroe than one share point.
    You can have one share point which is the Data drive and another share point which is the customer folder within.
    You can have share points which exist within share points.
    Jeff

  • Delegated User Admin with only UNLOCK USER Permission.

    Hi
    i need to create a Delegated User Adminwho will have only UNLOCK USER Action Permission in the Portal UME.
    I tried the UME Action UME.Manage_User_Passwords
    but it contains LOCK Permission also.
    Is there any action to acheive this ?
    Regards
    Rajendra

    Rajendrakumar,
    You are correct! The option provided by me is not applicable for EP 7.0.
    Still you have options to implement the required functionalities:
    You can implement the portal component or Webdynpro application for unlocking users. Use UME API for this.
    or
    Try to Export the unlock user component from a EP 6.0 Environment and import it into EP 7.0.
    Ram

  • Website viewing issue with Firefox 3.6 under Windows 7

    I use java script to list current headlines on my website userfriendlypc.net under, "In The News". The website has always looked good under Firefox, IE, Safari, Opera and Google Chrome. Since migrating to Windows 7, Firefox, only Firefox makes the text link in this area look like crap after the first link. The text changes to a greenish color and the hovered link seems offset making it look really bad. This only occurs in Firefox and only under Windows 7. I have tested this under Windows 7 with a basic install of Firefox and under XP. No add-ins or anything else was added when it occurred on the test machine.

    I thought the ClearType configuration would fix the problem as it seemed to clear it up once ClearType was disabled however doing this made other things look like crap. I tried every combination available and this did not fix the problem. I was able to fix the problem however by eliminating the fade function from the javascript on the web page. The "In The NEWS" section still functions properly, just without fading the article titles in and out. A compromise I can live with. Thanks all for your help and hopefully, we won't run into any further problems.
    Steve

  • Issues with headphones and speakers under Windows

    Sound Card: Sound Blaster Li've! Value (Came with an older Gateway PC)
    OS: Windows XP Professional with SP2
    Problem:
    When installing Windows XP on a clean dri've(Fresh Install) I am unable to get sound from my speakers and headphones at the same time. After numerous testing I've determined that this is simply a Windows XP/SB Li've Value issue of some kind.
    My temporary fix for this has simply been to switch my headphone and speaker plugs on my sound card with each other and go under the sound properties and turn off Digital output. Not a big deal just annoying having to do this.
    I've had this card installed with Windows ME on my system and Windows 2000 and did not have this issue as described above. I simply turned on digital output plugged in both my headphones and speakers to the back of my sound card and had sound from both with no problems what so ever.
    I read somewhere that switching the devldr.exe (which I actually tried) that was installed with windows over to the devldr.exe on the XP setup cd. This actually worked for a moment. Once I rebooted I no longer had sound from both my speakers and headphones.
    What I'm wondering is if I could switch the devldr.exe with either the Windows ME version (not sure if it uses the file) or with the Windows 2000 version would this fix my problem, or has anyone had this problem and found a solution other then what I have stated?
    Thanks

    Snagglepus,The forums are intended for the Community to assist each other, rather than Creative directly. We have Technical Support available by phone and e-mail that can assist anyone that wants help from a Creative technician.
    Switching files from different OS's wouldn't be supported by Creative (or Microsoft, normally), but if someone from the community has tried this they may be able to advise if it worked for them. Perhaps give it a little more time for people to reply, the forums are new.
    You didn't mention what kind of speakers you have connected to the system, this may help anyone that wants to reply to your thread.
    Cat

  • Channel unavailabl​e ONGOING issue with only 1 TV - please help

    I have had tech support out to my place no less than six times for various issues. The last time they tightened a cable and said it would be fine - again I am having problems and it is only on one TV.
    The problem:
    I turn to a channel - currently Weather and History  (sometimes others)- and it shows unavailable. I reboot, bla bla and get same result. This only happens on one TV. The scifi channel currently is pixelated with poor reception. I also had a problem with a show I taped that stopped in the middle and never re-started. I call but get the same - reboot, bla bla then send a tech. They can never fix it - it seems to correct itself at some point (of course always before they send a tech).
    The interesting thing is that it is only on my living room TV - not the bedroom. I am really tired of calling tech support or changing my schedule so a tech guy can come out and not find a problem. Does anybody have any ideas or thoughts? I could really use the help!

    "The channel being unavailable is usually caused by the box not being activate correctly. when the box was installed it automatically tried to activate."
    That is incorrect. 
    If it said "not subscribed" then that would be an activation type of an issue. 
    Currently unavailable is a signaling issue.  most commonly with the coax, sometimes with the splitter, and sometimes with the box itself

  • Issue with only one distribution point not able to access only one folder wile PIXE boot

    I am facing problem only one distribution point not able to reach perticular folder through network access account, all other DP and other folder are working fine, I already verifiy share and security permission are in place, through <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS001.xyz.ORG\SMSPKGE$\VEL000EA\</a>&nbsp;
    i am able to reach from network, but while booting from system belongs to perticular DP, it stuck on below folder where fdisk.cmd files are uploded from primery server. pls check below logs and suggest what could be the actual issue.
    </p><p></p><p><spanlang="ENIN">Severity&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Type&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    Site code&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Date / Time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; System Component&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    Message ID&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Description</span></p><p><span lang="EN-IN">Error&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Milestone&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    CES&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1/31/2014 12:32:11 PM&nbsp; MININT-L670NBC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Task
    Sequence Engine&nbsp;&nbsp; 11135&nbsp;&nbsp;&nbsp; The task sequence execution engine failed executing the action (DiskPart DataDisk) in the group (Install Operating System) with the error code 2147942402&nbsp; Action output: T=80070047
    (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,148) Failed to access the share <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\</a> with network access account !sAccessibleSource.empty(),
    HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2392) GetAccessibleLocation(pszSource, saResolvedPath, sSourceDirectory, dwFlags, hUserToken), HRESULT=80070002 (e:... [Show more]

    The error 80070047 states a msg as "No more connections can be made to this remote computer at this time because there are already as many connection as the computer can accept." Check the share quota if at all any limitations has been provided, if not,
    try giving one.. Also, check if any enterprise policy has been applied for the share connections limitations..
    bluerail

Maybe you are looking for

  • Video Problem with MS-6390 Motherboard

    Hey everyone, here is my problem.   My current video card is an old GeForce 2 MX 440 AGP.   I've never had a problem with it.  Today I purchashed a PNY GeForce FX 5200 AGP. When I remove my old card, and install the new one, I have a problem which i

  • HT1539 why does the download only show in shared content on my ipad? and can i access the shared content without wifi ( example driving in car?)

    I am using the icloud from a pc, and sharing with my ipad ( 1st generation) new to this. I have downloaded some digital copies into my itunes account. On my Ipad one shows under movies and 2 show under shared. Y is this and can shared content be acce

  • Displaying images in JPanel

    Hi, I'm trying to work out the best method to display a set of thumbnail images in a JPanel (similar to a Thumbnail view in windows XP) - at the moment I'm using a Tree, but am wondering whether this is the best way to go about it? I'm using a tree i

  • Init.ora in Oracle 10g

    Hi, I installed the Oracle 10g in windows XP and I need to edit some parameters in the init.ora file. When I searched for the init.ora file it is not available. Please let me know whether in oracle 10g it is renamed as other file name or whether I ne

  • Change position of Columns in a JTable

    Hello together! I have the follow problem: I have a JTable and want to change the position of the Columns. I tryed to remove and add the columns but that doesn't really work, either I have no columns or I have all twice. If there is any better method