Issues with Quota

Employee has Vacation Quota 01 and 02. When there are Absences It should deduct the quota 01 first and then Quota 02 .
For one of the employee there was 8 hrs left in Quota 01 and It started deducting from Quota 02. It is happening to only this employee in PRoduction.
So I went back and added the absences in TEST and after entering the absences I deleted one Absences that was deducted from Quota 01 and Ran Timeevalution and Payroll. So in TEST i had the same result 8 hrs quota left in Quota 01 and it stated deducting from Quota 02
I explained the Senario to the User that someone deleted the Absence that was from Quota 01. User says if the absence is deleted from Quota 01 and when Time evaluation runs it should go and adjust the 8hrs from Quota 02 to Qouta 01. I am not sure if it Does that way. Let me know  Why it didn't adjust the 8 hrs form Quota 02 to Quota 01

Hi,
from what you've written about the specific case, your conclusion seems to be okay.
In Time Eval., it won't be possible to meet the requirement...So I would just tell the user it can't be done.
A workaround is the manual one. Delete an already recorded absence from quota 2 and re-create the absence. As there's some quota left from QT1, it will use these hours.
Wilfred.

Similar Messages

  • CSV Download - issue with quote

    Hi,
    I am trying to downlaod my tabular form using Enable CSV output option in Reports Attribute. The report attribute setting has SEPERATOR as blank(so default comma) and ENCLOSED BY blank(so default ").
    My requirement is after i download i update few data and re-uplaod again which updates the data into my custom tables.
    My issue is, i have a value like -test1/2" size- (only the value between the '-'). So when i download this data and open the csv file in text format i can see the data is downloaded as
    "test1/2"" size"
    It has a enclsoed by as quote but it has added 1 more quote after 1/2"
    Because of this my validation is failing and i am not able to upload the data.
    Can any one help on this issue.
    Please let me know if my question is not clear.
    Thanks,
    Shankar

    Hello,
    Thanks for looking into my issue.
    I tried with follwing options
    Seperated By :
    Enclosed by '
    Seperated By '
    Enclosed by :
    Seperated By blank
    Enclosed by '
    Seperated By '
    Enclosed by blank
    In all the 4 optiosn when i downlaod the csv data i see an extra " after the original value
    Thanks,
    Shankar

  • Formatting issues with quoted text in replies

    Whenever I reply to a sender, it adds extra leading to the original (quoted) text -- otherwise it seems to keep the other characteristics. How can I fix this? It makes my reply messages really long, and I don't see any solutions in the formatting prefs.

    I have a similar problem in that spaces are added between lines of text in the quoted messages when I select "Reply To." I have found no solution, but the problem can be corrected with patience by deleting the added spaces one by one while your response message is in the "Reply To" mode, that is before it is sent.

  • Issue with quote site command,FTP

    Hello SDNit's,
    We have come accross a wierd problem where in we are trying to set the record length using the QUOTE site command .
    The command works alright when we run it on the FTP server but when we execute the same using the FTP_COMMAND function module it returns a unsuccessfull return code.
    Any inputs on this will be greatly appreciated.
    Thanks,
    Sid.

    Hi,
    It sounds like you have enabled 'Auto-Click' for some folders by accident - this causes all the links contained within to open in tabs.
    Go into the bookmarks manager and remove the checkbox for Auto-Click from the affected folders.
    Hope that helps.

  • Issue with PTO (Paid Time Off) quota generation

    Hi All,
    We have an issue with quota generation of PTO for our employees.
    The issue goes like this:
    We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
    we have  paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
    we have the following logic that has to go in this config:
    -- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
    -- Depending on the working hours of  the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
    I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible.  I really need this to get it done ASAP. Looking forward for help.
    Thanks,
    Chowdary.

    We use TM00 schema. Can i call TS15 and TS 12  rules into TM00 acheieve my issue of quota entilements?
    Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
    As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

  • Volume issues with GE60 Apache Pro-003

    I recently picked up the new GE60 Apache Pro notebook, and I've been running it for about a week now. I should of course mention that I also did a clean windows install after adding an SSD to the system (and now can't figure out how to add back that cool MSI panel that was there when I first got the system).
    Anyway, I've noticed that there seems to be volume issues with the system no matter WHAT kind of settings I tweak, or drivers I try to use. With all sliders up at maximum, the volume levels still never seem to surpass around 50% (from observing the volume gauges in the Windows Volume mixer panel). My previous notebook's speakers put out significantly higher volume, and was also able to put out far more power to my headphones (Audio Technica ATH-M50).
    Any possible ideas for the cause and solution to this problem? Thanks in advance, and let me know if there is anything else I need to mention.

    Quote from: darkhawk on 02-April-14, 20:44:14
    What are you using to gauge the '50%'? MP3's? Windows sounds? or what?
    Pretty much everything. Music, games, online videos... According to the volume mixer, the audio levels never seem to pass 50%. The grey bar bounces to the peak, but the green bar never seems to pass the 50% level. It's as if there's some sort of limiter in place I'm not aware of. And since I reformatted the notebook as soon as I got it, I was never able to see if the volume control worked correctly before the reformat.

  • Issue with the presence indicator in list/library web part.

    When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
     However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine.  I can't find any errors being reported on the server.  
    Looking at the rendered code the list web part generates:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
    Locations where the presence indicator works the code is:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
    It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead.  It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
    email address, not the sip address stored in the user profile.  I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
    We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
    in IE 9.0/10/11.
    Any ideas?

    We don't have a Lync server and I don't have the software available.  Are you saying just having Lync installed even though it won't work might help?
    I did some more digging and believe that this is an issue with the XsltListViewWebPart.  If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there.  Also our environment
    was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part.  If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
    indicator does not work.
    The presence control is not rendered by the xsl files used by the webpart.  I modified the xsl to display the raw xml and the html code for the presence is part of the xml.  I'm guessing this can't be changed and is part of how SharePoint is rendering
    the data for the XsltListViewWebPart.  You can see the Editor and CheckoutUser lines have the html code embedded in the data.
    <Row
    ID="60"
    PermMask="0x7fffffffffffffff"
    HTML_x0020_File_x0020_Type=""
    File_x0020_Type="xlsx"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
    serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
    File_x0020_Type.url="FALSE"
    FSObjType="0"
    FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
    FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
    FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    FileLeafRef="Database Sizes.xlsx"
    FileLeafRef.Name="Database Sizes"
    FileLeafRef.Suffix="xlsx"
    CheckoutUser="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    CheckoutUser.id="526"
    CheckoutUser.title="Ian Howe"
    CheckoutUser.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    CheckedOutUserId="526"
    IsCheckedoutToLocal="0"
    Created_x0020_Date="0;#2014-08-22 09:47:01"
    Created_x0020_Date.ifnew=""
    ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
    Modified="8/22/2014 10:51 AM"
    Editor="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    Editor.id="526"
    Editor.title="Ian Howe"
    Editor.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
    I just find it strange that the old ListViewWebPart works.  Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • Freezing Issues with multiple new MS-7028 (v1.0B) Motherboards

    I build several MSI motherboard based machines for clients every week.
    I have noticed a major problem with the MS-7028 (v1.0B) Neo2 and Neo2 Platinum Motherboards (I've had the same issue with both now)
    Things that cause the PC to freeze (mouse pointer freezes, nothing but a reboot or forced power off)
    1. Autorun of MSI "Drivers & Utilities" CD (several versions of the CD have been tried, all of them do it 90% of the time)
       Once it displays the "setup is launching, please wait" screen. Bang. It freezes.
    2. Running MSI CoreCenter (again tried several versions, including the most recent, downloaded of msi's website)
       Runs ok for a little while, but if left running while usually freeze the whole pc within minutes, if I play around in CoreCenter, it crashes even faster
    3. Running MSI Live Update 3 (again several versions have been tried, including the most recent release from MSI's website)
       Seems ok on the Neo2 Platinum M/B, but Neo2-FR version always froze system at "search VG card BIOS version"
    I have had this exact problem on 4 of 4 "MS-7028 (v1.0B) 915P Neo2-FR" and 2 of 2 "MS-7028 (v1.0B) 915P Neo2-Platinum" M/B's
    Any Ideas???
    edit:
    Each time this has happened the systems have been as follows.
    MS-7028 (v1.0B) Neo2-FR or Neo2-Platinum M/B
    Intel P4 3000Mhz Prescott CPU
    1G Geil Ultra DDR2 533Mhz (2x 512Mb Kit)
    MSI 6200 or 7300 PCI-E graphics
    Seagate 80-160G SATA Hdd
    LG 8x DVD-RW
    450+W PSU's always with 18A or higher on the 12+
    I’ve tried updating the Bios (which I do to all m/b's used for new systems)
    I’ve tried all the latest drivers
    This is always on a clean install of XP SP2
    happens on XP Pro and XP Home
    GRRRRRR HELP ME!!!!!!
    is the MS-7028 (v1.0B) Motherboard just a big stinky lemon?

    Quote from: Maesus on 10-May-06, 23:08:36
    When you said clean install, does that mean you started off from a 100% blank HDD?
    Correct
    Quote from: Maesus on 10-May-06, 23:08:36
    What version is your WinXP? 
    Windows XP Home SP2 (OEM) and Windows XP Pro SP2 (Oem) (happens on both)
    Quote from: Maesus on 10-May-06, 23:08:36
    Forget about the CD, Corecentre.. etc, get the drivers from the websites instead. and you don't have to get them from MSI websites. Intel INF drivers, get from intel.com. Display card get from nvidia.com.
    I get around the problem by downloading the  latest bios from msi's website
    I install the latest inf from intel.com and the latest nvidia drivers from nvidia.com
    and uninstall corecenter.
    It would just be nice to be able to have corecenter running, and to know WHY this happens
    [/quote]

  • Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

    Hi,
    I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
    In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
    During the process, I faced some issue with the output server in printing the labels.
    When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
    The file is move to the error folder and an error file is getting generated which contains the error message as given below:
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
    2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
    The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
    I also verified the license and it is a valid licence.
    Kindly help me out in solving this issue.
    Thanks
    Senthil

    I assume this is too late to help you, but other might need a hint.  I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
    It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
    Hope this helps anyone....
    Vegard

  • BSOD issues with Z68A-GD55 (B3): BIOS issue? Hardware issue? Voltage issue?

    Built this PC two months ago and have had issues.  This is the message posted on the BIOS section:
    Quote from: Grahamburger76 on 19-November-11, 03:48:23
    I have the z68-gd55 (b3).  I built this PC bout two months ago.  Awhile after the build, started getting BSODs during gaming and eventually was led here to flash a new BIOS.  I flashed the latest beta BIOS successfully and played for several hours.  Then sleep the pc but get a BSOD again when powering it back up.  The BCCode indicates an issue with the GPU or driver but I have read on that there was a problem in the BIOS  for the z68-gd65 (g3) that the voltage was off and needed to be set differently to accommodate
    Quote from: Bernhard on 23-September-11, 03:14:41
    @Junior, all three BIOS' that I tested, the BCLK is shown as 100 in the BIOS but once in the OS it applies 98. I have now set the base freq manually 10010 and that applies 100,2 BCLK once in the OS. Needs to be fixed.
                 The multi is still artificially restricted at X49.
                 DRAM auto apply voltage is 1,472 in the BIOS. I set it manually to 1,5V (1,507V) to prevent BSOD. Rebooting, the BIOS still shows applied DRAM voltage as 1,472 although 1,507 is applied. Need to do some DMM tests.
                 CPU phase control on the latest BIOS works correctly in Intel SVID Mode with the LEDs being lit solidly from 1 to 6 as the load is applied.
                 Selecting APS results in either the first 3 LEDs being lit or all 6 LEDs being lit, nothing in between.
    Has this been an issue in this boards BIOS too?  Thanks because short of RMAing parts, I am about at a loss as to what to do to fix these issues.
    This started with screen freezes needing hard restart using the restart button while playing Dragon Age:Origin and continued with Battlefield p4f, and BF3.  After reseating the CPU/cooler, RAM, GPU then updating the drivers using Live Update 5 and then manually updating; I started getting BSODs and restarts while playing games and several time while using 3D Mark.  Tried to change the voltage for the DRAM with no help and loaded only the Default Optimized Settings in BIOS.  I updated the BIOS to the listing in my signature, moved the HDD and Optical drive to different SATA ports and updated the audio driver to the current one on MSI website.  System finally seemed to be running fine then the stuff happened as quoted form my previous post.
    As this stuff has continued, the PC seems to be running slower and slower.  What I mean by that is the boot times have started taking longer and the system does not respond as quickly to commands.  Like now, as I type, I am at least two or three words ahead of what is put on the screen (never has done that before).  Funny thing about that is this was the fastest computer I have ever had with response, booting, and post (my wife even commented on how fast it booted up).  Not sure if the other issues have anything to do with this but I am trying to post everything I can think of to give all the necessary info.  If more information is needed then let me know and possibly tell me where to find it?
    Not really sure how to post the dump files from Blue Screen View and My Event Viewer but gladly would if someone can give a newbie some direction on this.  Thanks in advance for all help and consideration.

    Yes, the BIOS I have flashed was pulled from there.  I thought it had the problem resolved until it had another BSOD after several hours of use.
    The Stop:error code, is that the Bug Check Code from the Blue Screen Viewer?
                                                                             BBCode       0x00000116 (Parameters:  fffffa80`0c09d4e0   fffff880`043a180c   00000000`00000000     00000000`0000000d)
    I may have given you more stuff than you needed but I just figured to be thorough.  This is the record from yesterday but there are like 5 or 6 more from the previous month that are in order from most recent to oldest.
            DRIVER_IRQL_NOT_LESS_OR_EQUAL                 BBCode      0x000000d1 (Parameters:  00000000`0000009d     00000000`00000002   00000000`00000001   fffff880`055bbe7d)   
                                                                             BBCode      0x00000116    (Parameters:  fffffa80`089c64e0   fffff880`0b95c008   00000000`00000000   00000000`00000002)      
                                                                        BBCode      0x00000116 (Parameters:  fffffa80`0c2094e0   fffff880`0440780c        00000000`00000000   00000000`00000002)
            SYSTEM_THREAD_EXCEPTION_NOT_HANDLED     BBCode    0x1000007e    (Parameters:  ffffffff`c000001d   fffff880`00000001   fffff880`02b982b8   fffff880`02b97b10)
            CRITICAL_OBJECT_TERMINATION                    BBCode     0x000000f4 (Parameters:   00000000`00000003   fffffa80`08761730   fffffa80`08761a10   fffff800`031908b0)
       

  • Issues with Shockwave 11.5.2.602 / 11.5.6.606 MSI installer

    <UPDATE 8/3/09> Nearly all of the issues mentioned below are still present in the MSI installer for 11.5.6.606 - the only one that Adobe have fixed is the one where the MozillaPlugins 'Version' value is left blank by the MSI by default - this is now created correctly, but all of the other issues remain.
    Personally I have given up trying to use this MSI package to deploy Shockwave until Adobe get their act together - instead I am using a wrapper to wrap the Shockwave executable inside an MSI file and deploying it that way, although this is not ideal.
    I have created an MST file which will fix the MSI installer for version 11.5.6.606, which I will post to another forum shortly, but I am not planning to keep it updated for future versions as I don't really have the time.
    Hi,
    I've tried submitting the following via the Adobe Customer Support portal and via the Feature Request/Bug Report form, but the first told me that I needed to 'get in touch with Adobe Enterprise Solutions team for getting help' and that 'to get in touch with them you have to purchase a contract', and the second resulted in a bounced email address saying that '[email protected]' 'does not exist at the organization this message was sent to'.
    In short, attempting to contact Adobe to report issues with their installers sucks, and I am posting this here in the vain hope that someone at Adobe might read this message and possibly forward it to the relevant people. Some of the issues have already been reported here on this forum, but some of them are new, and I guess others might be interested in them too.
    Hi,
    I would like to report some issues with most recent version of the Shockwave installer, available in MSI format from the following location:
    http://www.adobe.com/cfusion/entitlement/index.cfm?k=4E6102EB-DA7C-2795-C744826EFDE2A098&l oc=en_us
    This is the installer for version 11.5.2.602, with a digital signature dated 06 November 2009 10:52:21
    When downloading this version of the installer in Windows Installer (MSI) format, the following issues manifest themselves, most of which are not a problem when using the Full EXE installer available from the same page.
    First of all, when installing the MSI file using Group Policy Software Deployment, if you log on to the computer after the MSI file has been deployed and view a web page that contains Shockwave content, you receive the following errors in the Windows event log:
    Event Type: Warning
    Event Source: MsiInstaller
    Event Category: None
    Event ID: 1004
    Date:  16/12/2009
    Time:  16:51:23
    User:  CRGS\DefaultUser
    Computer: ITO01
    Description:
    Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_', component '{E89F323D-7BDB-46E1-A0FD-6227821F94EA}' failed.  The resource 'C:\WINDOWS\system32\config\systemprofile\Application Data\Adobe\' does not exist.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Event Type: Warning
    Event Source: MsiInstaller
    Event Category: None
    Event ID: 1001
    Date:  16/12/2009
    Time:  16:51:23
    User:  CRGS\DefaultUser
    Computer: ITO01
    Description:
    Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_' failed during request for component '{3D3697FC-DB90-46D8-9ED4-5D54B4901F62}'
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    If you are logged on as an Administrator, then the computer will immediately attempt to 'repair' the Adobe Shockwave Player installation in order to create the missing folder 'C:\WINDOWS\system32\config\systemprofile\Application Data\Adobe\', which leads to a significant delay in the initialization of the Shockwave content on the web page. If you are logged on as a non-Administrator, the errors will still appear, but the 'repair' operation will fail due to insufficient permissions to create the above folder.
    I have done some testing and it seems as if this problem can be easily resolved by removing the code from the installer which tells it to create an empty folder in the 'Application Data' folder called 'Adobe\Shockwave Player 11'. This code seems to be entirely unnecessary, as no files are created inside this folder as part of the installation, and I have removed it successfully from my own copy of the MSI without it causing any issues. I have found some other people who are also experiencing this problem in the following forum post:
    http://forums.adobe.com/message/2379350 (post number 8)
    and since this 'repair' operation causes all customised registry settings to be reset back to defaults as part of the repair, it would be very helpful if this 'feature' could be removed from future versions.
    Secondly, there are a number of registry keys which are created incorrectly by the MSI installer when the above 'repair' operation takes place, which need to be corrected to prevent further issues from occurring:
    Under '[HKEY_CLASSES_ROOT\CLSID\{1F3CB77D-D339-49e0-B8E4-FECD6D6F8CB8}\LocalServer32]', the 'default' value is set to the following by the MSI:
    C:\WINDOWS\system32\Adobe\SHOCKW~1\SWHELP~1.EXE"
    (Please note that there is a double quotation mark at the end of the value, but not at the beginning)
    Whereas the executable installer creates the value as follows:
    "C:\WINDOWS\system32\Adobe\Shockwave 11\SwHelper_1152602.exe"
    According to a forum post (http://forums.adobe.com/message/2379350, post 15), this causes DCOM errors when Shockwave is launched, if the MSI 'repair' has taken place as described above.
    The above registry value should be set to the following in the installer's Registry table:
    "[INSTALLDIR]Shockwave 11\SwHelper_1152602.exe"
    so that the MSI installer works the same as the executable one.
    Under '[HKEY_CLASSES_ROOT\TypeLib\{6EF568F4-D437-4466-AA63-A3645136D93E}\1.0\0\win32]', the 'default' value is set to the following by the MSI:
    Adobe\SHOCKW~1\SWHELP~1.EXE
    Whereas the executable installer creates the value as follows:
    C:\WINDOWS\system32\Adobe\Shockwave 11\SwHelper_1152602.exe
    Also, under '[HKEY_CLASSES_ROOT\TypeLib\{6EF568F4-D437-4466-AA63-A3645136D93E}\1.0\HELPDIR]', the 'default' value is set to the following by the MSI:
    Adobe\SHOCKW~1\
    Whereas the executable installer creates the value as follows:
    C:\WINDOWS\system32\Adobe\Shockwave 11\
    Once again, the above registry values should be set to the following in the installer's Registry table to fix the issue:
    [SystemFolder]Adobe\Shockwave 11\SwHelper_1152602.exe
    [SystemFolder]Adobe\Shockwave 11\
    Under '[HKEY_CLASSES_ROOT\CLSID\{166B1BCA-3F9C-11CF-8075-444553540000}]', the 'default' value is NOT SET by the MSI by default:
    Whereas the executable installer creates the value as follows:
    Shockwave ActiveX Control
    This value should be set in the installer's Registry table to fix the issue.
    Under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\common]', the 'default' value is set to the following by the MSI:
    Macromed\common\
    Whereas the executable installer creates the value as follows:
    C:\WINDOWS\system32\Macromed\common\
    Also, under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\coreplayer]', the 'default' value is set to the following by the MSI:
    Macromed\Shockwave 10\
    Whereas the executable installer creates the value as follows:
    C:\WINDOWS\system32\Macromed\Shockwave 10\
    Also, under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\coreplayerxtras]', the 'default' value is set to the following by the MSI:
    Macromed\Shockwave 10\xtras\
    Whereas the executable installer creates the value as follows:
    C:\WINDOWS\system32\Macromed\Shockwave 10\xtras\
    The above registry values should be set to the following in the installer's Registry table to fix the issue:
    [SystemFolder]Macromed\common\
    [SystemFolder]Macromed\Shockwave 10\
    [SystemFolder]Macromed\Shockwave 10\xtras\
    The MSI installer does not create '[HKEY_CLASSES_ROOT\.dcr]', '[HKEY_CLASSES_ROOT\.dir]', or '[HKEY_CLASSES_ROOT\.dxr]'
    Wherease the executable installer creates all three of these keys and populates them all with the following 'default' value:
    "Content Type"="application/x-director"
    These keys and values should be set in the installer's Registry table to fix the issue.
    The MSI installer creates a value under the following registry key:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponets\SwDi r]
    However this registry key is obviously misspelt (missing an 'n' in 'OptionalComponets') and should read as follows:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponents\SwD ir]
    This key name needs to be changed in the installer's Registry table to fix the issue (also pointed out in the following forum post: http://forums.adobe.com/message/2379350 (post number 10)).
    Under [HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer], the 'Version' value is left blank by the MSI by default:
    Whereas the executable installer creates the value as follows:
    1152602
    This registry value should be set to the correct version in the installer's Registry table to fix the issue.
    Finally, the MSI installer creates a number of registry values under the following path:
    [HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer\Mime Types]
    These values are *in addition* to the values created under the following path:
    [HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer\MimeTypes]
    (Note there is no space between 'Mime' and 'Types' in the second key path)
    The executable installer *only* creates registry keys under the 'MimeTypes' key, and it seems as if this is the correct formatting for the key (also pointed out in the following forum post: http://forums.adobe.com/message/2379350 (post number 11)).
    The unnecessary 'Mime Types' registry keys and values should be removed from the installer's Registry table to avoid any potential issues.
    I am sorry that this is such a long list, but it seems as if a number of things have been changed in the transition from 11.5.1.601 to 11.5.2.602, and it would be very helpful if these changes could be put back to how they were before, so that the MSI and the executable installers function in the same way as much as possible.
    Message was edited by Borgquite - added 11.5.6.606 update

    Have posted an updated version of the MST to my webspace here:
    http://homepage.ntlworld.com/minkus/shockwave/shockwave115606mst2.zip
    This new version fixes the following issues (changes to this version in bold):
    MsiInstaller repair & errors on first run as non-admin (removes 'AppData' directory entries)
    DCOM errors once Shockwave is installed (adds double quotes to the beginnning of LocalServer32 value)
    Incorrect TypeLib paths in the registry (fixed to use built-in [SystemFolder] property)
    Default CLSID description value missing (set to 'Shockwave ActiveX Control', as per the executable installer)
    Incorrect Shockwave 10 paths in the registry (fixed to use built-in [SystemFolder] property)
    Misspelt 'OptionalComponets' registry key (renamed to 'OptionalComponents')
    Missing .dcr, .dir, .dxr Content Type registry values (included in the executable installer)
    Fixed incorrect AppID registry key (set to use installer's [VERSION] variable)
    Removed 'Launch SWDNLD.exe' shortcut created in Programs subfolder (people don't want this - see here)
    I have tested this on my network and it all seems to work fine. Unfortunately my original plan to use the executable installer didn't work out as it does not include the Shockwave 10 compatibility components described here and here, so it looks like I'll have to keep this MST file up to date with the latest versions until Adobe fix the problems themselves...
    If you want to see the changes that I have made, load up Adobe's 11.5.6.606 MSI file in Orca, then use Transform / Apply Transform to apply the MST, and look for the entries in green.
    Please post any feedback to this thread, and I will try to respond if I can help!
    Chris Hill

  • Issue with SLA reports of Exchange 2010 MP in SCOM 2007 R2 !!

    Hi,
    I have issues with Exchange 2010 MP SLA reporting. Whenever report is run it fails on some or the other dataset(Outage**,SLAbyDAte etc.) When I digged in, I found that it is connecting to DW Exchange 2010 Availability tables + Planned maintainance +
    outage table. The tables were not available in the DW, not sure how it got removed. Initially I tried by uninstalling and installing MP(Exchange 2010  & Exchange 2010 reports both) if relevant tables get created automatically but it did
    not help and I was still facing the same issue. Then I tried to create the tables manually and check if it could resolve the issue. There was unique ID associated(different in different computer) with the name of most of the tables. I tool it from Exchange
    report data source which exists in reporting server. But I could see that table remain empty with no records there and SLA report start giving different issues stating table instances do not exist.
    Could anyone help me to restore the SLA report of Exchange 2010 MP ? How should I ensure that data start populating the tables ? I am also helpless here because we do not have correct DW dump to restore back to earlier when it was working fine.
    //BR

    Hi,
    Based on my research, to correctly install the Correlation Engine, consider the following when you install the Exchange 2010 Monitoring Management Pack:
    Determine which server will host the Correlation Engine. While not strictly required, it's strongly recommended that the Correlation Engine be installed on the Root Management Server computer.
    Make sure that you download and install the Exchange 2010 Management Pack that matches the operating system for the selected server. You can install the 32-bit or 64-bit version.
    Make sure that you run the Microsoft Installer (.msi) package on the server where you want the Exchange 2010 Management Pack and the Correlation Engine to be installed.
    After the installation is complete, the Correlation Engine service will have been installed on the server, and the Management Pack files will have been copied to the
    System Center Management Packs folder. By default, the installation directory is C:\Program Files\System Center Management Pack.
    Quote from:
    http://technet.microsoft.com/en-us/library/ee758051(v=exchg.140).aspx
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
    Regads,
    Yan Li
    Regards, Yan Li

  • Issues with External Hard Drives

    I hope this is the right forum for this one - please give me a steer if not! I've also posted it in 'Dock and Finder', but this forum seems equally appropriate, if not more so.
    I'm getting repeated issues with External Hard Drives, including ones that I have been using successfully for months/years, suddenly failing to mount and then becoming 'unknown device' through the firewire branch of 'About This Mac'.
    I've just bought a new hard drive on the grounds that the others had somehow failed, and the same problems are emerging. I decided to Repair Permissions on my iMac's internal drive, and am copying the results below, from repair runs conducted yesterday and today:
    YESTERDAY'S REPAIR PERMISSIONS RESULTS
    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Macintosh HD appears to be OK.
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
    Permissions differ on "Library/Preferences", should be drwxrwxr-x , they are drwxrwxrwx .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "sbin/umount" has been modified and will not be repaired.
    Warning: SUID file "bin/rcp" has been modified and will not be repaired.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
    Permissions repair complete
    TODAY'S PERMISSIONS REPAIR RESULTS
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "sbin/umount" has been modified and will not be repaired.
    Warning: SUID file "bin/rcp" has been modified and will not be repaired.
    Permissions differ on "Library/Application Support/Apple/ParentalControls/ContentFiltering", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Application Support/Apple/ParentalControls", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired.
    Warning: SUID file "usr/bin/rsh" has been modified and will not be repaired.
    Permissions repair complete
    My concerns are:
    * Some of the permissions repaired yesterday appear to have needed to be repaired again today
    * There are several files which carry a warning that they won't be repaired as they have been 'modified', and some of these clearly relate to disk management.
    Does anyone have any ideas what is going on???
    Thanks!!

    Many problems with the 10.5.7 update have been fixed by a Restart.
    If that doesn't help, something may have gone wrong with the update. Download and install the "combo" update, from: http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
    If that doesn't help, try running the Apple Hardware Test, on the disc that came with your computer.
    1. Disconnect all external devices (including the Ethernet cable) except the keyboard and mouse.
    2. Insert the "Additional Software & Apple Hardware Test" disc that came with your computer.
    3. Restart while holding down the "C" key. When the list of available startup volumes appears, click Apple Hardware Test and the right arrow.
    4. When the Apple Hardware Test main screen comes up (after a moment), follow the on screen instructions.
    5. If it detects a problem, an error code will be displayed. Make a note of it.

  • I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

    I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Maybe you are looking for

  • Workflows completes but goes to "Sorry something went wrong" page

    SharePoint Version: 2013 Workflow Version: 2010 My Title: Junior SharePoint Administrator I have been working weeks on a project to use workflows for a business process. It is as simple as setting variables and sending email to people. I have success

  • Using Keychain Access for applications other than Safari

    I am trying to decide what browser I want to use. There are several things to take into consideration - bookmarks kept in sync between the browers and passwords. So far I have stayed with Safari because it works with Keychain. I tried to open Keychai

  • Possible to change the front and back speaker volume ?

    Hello, as it says in the topic, i was wondering if it is possible to change the volume of the front and the back speakers (the same way it is possible to change the volume of the center speaker). If anyone could tell me wether this is possible at all

  • Integrated WLS version 10.3.3.0

    I just downloaded JDeveloper 11g Release 1, and I am trying to run a sample Struts 1 application, MailReader. I started the integrated WLS, and surfed to http://localhost:7101/console. I was presented with the login page, and I cannot log in. I have

  • How to keep the horizontal top column letters and left row numbers????

    When working on a table, there is a vertical column on the left of the row numbers and a row across the top with letters that identify columns. I would like to keep this (as in Appleworks) but whenever I click on the table, or use Print View, or Prin