Issues with Samsung Galaxy Tab S after installing 5.0.2

Hi all,  After updating to the latest firmware I have had nothing but issues leading to the tablet now being useless. Power drains in seconds dropping from 53% to 2% in 3 minutes and loosing mobile connection every few minutes. The tablet turns itself off constantly and it is completely useless.  I have done the usual, deleted cche partitions's, soft reset, complete reset, deleted all data on SD card inserted and checked SIM in my phone to make sure it works. Anyone else had these issues or  other, this is redicoulus. After waiting months for the same update for my Galaxy Note 3 I am staring to have other issues with this also and this is very worrying.  many thanks  

The update is FOTA. Your device will notify u when its your turn. They send them out in batches.
Now you can take it to a best buy to the Samsung experience center and have them flash it. Also a Att device support center can do it.

Similar Messages

  • Sony MDR-1RBT with Samsung Galaxy Tab 2?

    I've successfully paired my new Sony MDR-1RBT Bluetooth headphones with my Samsung Galaxy S3 phone.  However, I can't get them to pair with my Samsung Galaxy Tab 2 tablet.  Are they compatible?
    I held the button for 7 seconds until I heard the sound and the red/blue lights flashed.  The Galaxy Tab was discoverable but never found the headphones.  I tried restarting the tablet, restarting the headphones, etc.
    Any suggestions would be appreciated - these headphones were too expensive to not work with all my devices. 
    Solved!
    Go to Solution.

    I figured this out today - I realized I had to hold the power button long enough to see a red flash and then keep holding until I hear a second tone and a red/blue flashing.  The unit paired right away when I did this.  Thanks!

  • Help with error msg to send data with samsung galaxy tab app

    To whom it may concern,
    I downloaded this app and keep getting an error message. I always send the report. I have a Samsung galaxy tab. I have tried restarting my tab as well as uninstalling the app to reinstall it but I am still getting the error msg to send report. Please assist me in fixing this issue. Thank you for your time anbd patience.
    Kind Regards,
    April Joi Jones

    Hi April Joi,
    Could you please specify more on this issue. Which app are you exactly talking about?
    Are you using Adobe Reader on your Galaxy tab? Have you signed in to your "acrobat.com" account using Adobe credentials.
    What exactly were you trying to do?
    Please attach the screenshot of the error message(using camera icon) so that I can analyze the issue at my end.
    Hope to hear from you.
    Regards,
    Anubha

  • Teathering issue with samsung galaxy s2 GT i9000

    Recently i bought my blackberry wifi only model. i tried teathering via hotspot and bluetooth via my samsung galaxy s2. Actually it gets connect but unable to browse any site or open any application.
    My same samsung s2 can teather with other devices.i checked all settings and found ok.
    is this known issue of teathering via s2 ?
    when RIM will bring fix for this issue ?

    Ok, I recieved link to bugzilla [http://bugzil.la/769269 http://bugzil.la/769269] from AaronMT

  • Has anyone else had issues with their Mac running slowly after installing Mavericks?

    Ever since I installed Mavericks, my MacBook is running waaaaay slower. One of my favorite things about Macs has always been how fast they boot up, but ever since Mavericks, mine takes forever. A lot of programs like GarageBand and Premiere Pro are also running really slowly. They used to work great. Anyone else having this same issue?

    The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • NAC Problem with Samsung Galaxy Tab

    I have campus running cisco clean access. My problem is this. When my wireless tablet w/ android connects to the network and tries to access the internet it takes me to the login page. Now I can put normal guest information in and then gain access to the interent for 5 secs, then no more access. When I check the summary logs on the CAS it shows my device being added to the certified list as well as mac address list. I then check device management and confirm that my device is there under the guest role.
    I am not using any NAC agent.
    If I want to reconnect I have to remove the device from device management and then i can restart the process with the same results as above. If I add an exemption to allow this device, then it can access the entire network/internet.
    My questions are these. Am I missing something obvious? Are android devices not supported? Where would I go to further trouble shoot this?
    Thanks for any help.

    Are you running inband or out of band. I am thinking you are running inband since you mentioned the filter but i just wanted to make sure. Also what version of clean access are you currently running.
    You mentioned that you are able to access the internet for 5 seconds, what does that mean and how did you verify this?
    thanks,
    Tarik

  • Super charger and samsung galaxy tab 2

    Hi all, i have a msi p67a-gd53 my question is,  Is the super charger ok to use with samsung galaxy tab 2 ?  ive done a google search and nothing found, It would be nice to use it with my samsung tab, But i don't wont to plug it in and go BANG    thanks in advance

    Duo Core is the wrong section of the forum for your mainboard, but here is a link to the software guide. Maybe something useful is in it about it;
    http://www.msi.com/product/mb/P67A-GD53--B3-.html#/?div=QuickGuide
    Samsung may have some guidelines on charging requirements? Have you checked with them yet?

  • Unable to install Photoshop touch in samsung galaxy tab 10.1 - United Arab Emirates

    HI,
    I'm unable to install photoshop touch in my samsung galaxy tab 10.1. its says this device is not compatable with any of your devices. but i saw this s/w is tested in galaxy 10.1 tab.. how its happen any ideas??

    @jens Nandi there is no choice to say unfortunate...
    i just fixed this issue...
    what i did is
    create a new google account as united state as country
    reset the device to factory setup
    insert a sim from my home country(India)
    enable data roaming(it will not charge)
    use wifi to connect to device
    login to android market with the us google account
    and purchased
    switch back to my orginal account
    now happly using it also i unlocked the some additional s/w that blocked here like google voice, winamp etc
    Thanks guys for the support

  • Is a Firefox version compatible with a Samsung Galaxy Tab 3 forth comming?

    The Firefox for Android that is currently available is not compatible with my Samsung Galaxy Tab 3. Is a there a new version in the works that would be compatible?

    When I try to install "Firefox Browser for Android" from Google Play Store on my Samsung Galaxy Tab 3, I get the following message, "Package file is invalid".

  • Unable to install Adobe Air on Samsung galaxy tab 3 10.1

    Hallo,please help me with installation adobe air app on my Samsung galaxy tab 3 10.1 android version 4.2.2

    Or ask directly in the Adobe AIR forum: http://forums.adobe.com/community/air/installation

  • How to install adobe reader on my Samsung Galaxy Tab 4.?

    I can't figure out how to install adobe reader on my Samsung Galaxy Tab 4.  Can anyone help? I want the free version.
    Thanks!

    Please see How to uninstall and reinstall Adobe Reader for Android.
    If you have not installed Adobe Reader for Android on the device before, you can just skip to the second section: How to reinstall Adobe Reader.
    Adobe Reader is a free PDF viewer.  You can view PDF documents, add comments (e.g. sticky notes, highlight, freehand drawing, handwritten signatures), fill out forms, add personalized bookmarks, etc.  Only extra features (e.g. converting from PDF to Word/Excel, converting from Word/Excel to PDF) require paid subscription services.
    Please let us know if you have any further questions about installation.

  • I am unable to install adobe flash player in my samsung galaxy tab 2

    i am unable to install adobe flash player in my samsung galaxy tab 2 p3100 please give me the reason and solution, kindly contact me at [removed]
    i am an Indian User

    Is your device listed on http://www.adobe.com/devnet-apps/flashruntimes/certified-devices.html ?
    See also How do I manually install Flash Player on my Android device?
    P.S. this is a public forum; please do not post your phone number and other private data!

  • Hi, on a new MBPR 13, I transferred pics from my Samsung Tracfone smartphone using AndroidTransferFile app worked good. My Samsung Galaxy Tab will not transfer with ATF, tried Samsung Kies also no luck, any ideas? Thanks...

    Hi, on a new MBPR 13, I transferred pics from my Samsung Tracfone smartphone using AndroidTransferFile app, worked good. My Samsung Galaxy Tab will not transfer with ATF, tried Samsung Kies also no luck, any ideas? Thanks...

    Today I downloaded a new version of Kies, 3.1.0.15042_6, and it seemed to work fine.  I was able to backup my Note 3 running Lollipop with no hesitation.  Files transferred to my Mac running Yosemite, OS X 10.10.3, easily.  The download is available at http://www.samsung.com/us/kies/

  • Not finding flash in samsung galaxy tab 2 7.0 with android 4.0... where can i find flash player?

    hi, i just bought a galaxy tab 2 7.0 with android ice cream but i don't find adobe flash player
    where do i find it?

    Hi,
    The list of Adobe certified devices can be found here:
    http://www.adobe.com/devnet-apps/flashruntimes/certified-devices.html
    It does not look like the Samsung Galaxy Tab 2 7.0 is an officially supported device. Also, on the page above I found the following statement.
    "Please note: Flash Player will not be certified for any device OS beyond Android 4.0.x." Ice Cream Sandwich is version 4.1.
    Regards,
    Greg

  • Can't get rid of weird Japanese ads on Samsung Galaxy Tab 4

    I have a Samsung Galaxy Tab 4, and one of the first weeks I started using it, this Japanese Assistive Touch type thing appeared, but wasn’t connected with an app I could uninstall to get rid of it. But after a couple weeks, it disappeared without my noticing (or doing anything to cause it to go away). But now (from about several weeks ago) I have started getting these popup ads. However, they are all in Japanese, which leads me to think the Assistive Touch and these ads are connected somehow. When I have accidentally clicked on the ads they try to get me to download their apps (which all have very suspicious permissions). But now I can’t figure out how to make them go away. I have run scans through TrustGo AntiVirus, AVG AntiVirus, Clean Master Antivirus, TrustGo Ad Detector, and Lookout Ad Detector multiple times, and all of them after an initial scan and clear (which only gave basic things and didn’t solve the problem anyway) have told me my system is clean, even though I am still getting the ads. I have run Clean Master’s Junk Files scan, and in the results under the “Obsolete apks” heading, were three apps with Japanese titles, and the words Not Installed underneath them. I told Clean Master to “clean junk”, and the apps disappeared from the list, but the ads were still appearing. Next, I tried running my device in Safe Mode to see if I could pinpoint the problem to a third party app (even though Clean Master had classified them as Not Installed). When I ran it in Safe Mode, I clicked through all the apps available, and no ads appeared. But when I restarted it in Normal Mode, I clicked through all the same apps from Safe Mode, and still no ads appeared. It was only when I went to a third party app that the ads appeared. I went to several third party apps, and ads popped up on almost all of them. However, I’m not sure what to do to now to try to get the ads off. Any suggestions? I would like to avoid doing a factory reset if at all possible.

    Not technically, no, but around the beginning of when I got my tablet in
    July, an Assistive Touch type thing appeared, but I didn't download it.
    That was also in Japanese, but I couldn't figure out a way to delete it.
    However, it somehow disappeared without my noticing or doing anything about
    it. I feel like they're connected. So the issue's been going on for longer
    than from the last app I downloaded. I haven't removed any apps yet to test
    it though.
    On Thu, Sep 18, 2014 at 11:08 AM, Verizon Wireless Customer Support <

Maybe you are looking for

  • Mail application will not open

    My mail application quit opening a few weeks ago. When I try to open it with the icon on the dock and in the finder the screen just blinks. Even my computer savvy wife cant figure it out. My next stop is the genius bar unless there are some geniuses

  • EBS 12.1 integrate with XML Publisher

    Hi all I'm new in Xml Publisher yet and I used Oracle Discoverer before but now i want to use Xml Publisher for reporting. I see usefull post BI Publisher on EBS R12 also Note: 552735.1 - Integrating Oracle Business Intelligence Applications with Ora

  • [Solved] ROS ERROR: -200

    I created a shortcut to Forms 6 and I put in "Start in" slot the folder where I have the fmb. When I try to open a form, I get a "ROS ERROR: -200" and then Forms 6 has a fatal error and closes. Edited by: Danicela on 22 avr. 2009 05:29

  • Ipod touch was stolen and does not have the Find my app how do I wipe the system.

    My Friends IPod touch was stolen today, the Ipod does not have the find my app. how

  • Dreamweaver MX 2004 error

    This past week when I try to open Dreamweaver and access my web pages, I get a message that says: "Dreamweaver MX 2004 has encountered a problem and needs to close. Sorry for the inconvenience." How do I resolve this?