ISync not installed after upgrade to 10.4.6

After install of 10.4.6, I can't find iSync icon anywhere on my computer. I found the install in Library- Receipts- iSync.Pkg (with an installer). When I activate the installer it will not complete the install.
I need help getting iSync back into my applications. Help

Hi William
You can get iSync back with Pacifist. Delete your iSync receipt, then install the application from your original Tiger install disk(s). I recommend you reinstall the 10.4.6 combo updater afterwards to make sure you have the newest iSync.
Matt

Similar Messages

Task Sequence packages not installing after upgrade to R2

Hi all
As the title suggests, I've upgraded my SCCM 2012 server from SP1 to R2. The OSD Task Sequences reach the stage where the client is installed, and ends after this point. However there are several software packages after this step that it is seemingly skipping
entirely now.
Any idea why this might be?
Thanks

Ok,
After banging my head for a few days with that issue i saw the light at the end of the tunnel ( an not the
train) today.
Long story short, the culprit was the boot image. I upgraded to 6.3 and everything in my TSs is working as
it should.
Here are the details:
The recall my issue, after upgrading SCCM from SP1 to R2, none of the software packages were getting installed
in a Task sequence. A TS runs up to the installation of the SCCM agent and then it quits.
Looking at the log file in C:\Windows\System32\ccm\logs\smstslog I found the following errors:
Resuming Task Sequence in Full OS TSMBootstrap
Failed to get the environment key. TSMBootstrap
Failed to resume task sequence (0x800700EA).
Exiting with return code 0x800700EA TSMBootstrap
Earlier i mentioned that my boot images did not get updated as part of the site upgraded, so i went and updated
them to version 6.3 and after making sure it got deployed in a TS to make it available through PXE, my problem was gone.
this post helped me tremendously to realized that the boot image was the issue:
https://social.technet.microsoft.com/Forums/en-US/a793071d-1a3b-4b68-b6de-6d8c1a1fda0f/failed-to-get-the-environment-key-smstslog?forum=configmanagerosd
Mario.

Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

Upgraded to Windows 8.1 on Pavilion g6. Officejet 4500 Wireless all-in-one still prints but won't scan. Downloaded full feature driver. Installation quit giving error message 'file cannot be found'. Tried 'chat' sessions with no resolution
This question was solved.
View Solution.

Hello bob5e,
I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
2. If that does not work, please try this next troubleshooting document step by step.
Installation issues - The Progress Bar on the Software Installation Stops or Stalls
I hope this helps!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

Dymo 330 Turbo will not install after upgrade to 10.4.6

I installed the Dymo software 7.5.1 for the Intel Mac and the Dymo printer does not find an appropriate driver on the first window. Then I choose the additional printers button and the Dymo printer is not in the window under the Dymo Duo selection. This worked fine on another computer with 10.4.5. I have deleted the printer cache file and reinstalled the software and even tried the suggestion from Dymo to remove all files from /Library/Printers/ except for Dymo, PPDs, and PPD Plugins. None of these worked.
Does anyone have a suggestion?

I had the same problem with my Turbo 330. Tried everything.
Finally sent it back to DYMO for a firmware update. The turnaround was quick and it works fine now. Got the info off the support section of their website which I am pasting below:
In this case, the LabelWriter requires a firmware update. Once the firmware has been updated, you'll be able to add the LabelWriter to the Printer List in Mac OS X. This issue only affects certain models of the DYMO LabelWriter 330 and DYMO LabelWriter 330 Turbo.
There are two options for obtaining a firmware update. You can flash update the LabelWriter's firmware if you have access to a Windows-based PC with an available serial port. If you do not have access to a Windows-based PC with an available serial port, you'll need to contact DYMO Technical Support to obtain a Return Material Authorization (RMA) number so DYMO can update the LabelWriter's firmware for you. Below are instructions on how to proceed with both options:
Flash Updating the Firmware:
1. Disconnect your LabelWriter from the Macintosh. Connect it to an available serial port on a Windows-based PC, using the serial cable that was packaged with the LabelWriter.
2. Note the model number of the LabelWriter you have. The model number is located underneath the LabelWriter.
3. Go to ftp.dymo.com and double-click on the Printer Updates folder. In Windows, download and install the appropriate firmware update utility for your LabelWriter.

App Store not responding after upgrade to OS X Mavericks and installing free Keynote, Pages and Numbers app

My App Store is not responding after upgrading to Mavericks and installing free Keynote, Pages and Numbers Apps.
Also I tried to reboot and restart and nothing happens still unresponsive.
Tried to click as many times as I can the App Store and it won't open.
Please Help.

Dongski
I had the same problem and solved it myself.
Please see discussion https://discussions.apple.com/message/23556072#23556072
Hope it helps

Firefox cannot find flashplayer that I installed after upgrade to Firefox 11. On a OpenSolaris 11 machine. I did move libplayer.so to /usr/lib/firefox/plugins and bounced firefox... but plugin not found.

Firefox cannot find flashplayer plugin that I installed after upgrade to Firefox 11. I am running OpenSolaris 11 64 bit. I did move libplayer.so to /usr/lib/firefox/plugins and bounced firefox... but plugin not found.

Firefox cannot find flashplayer plugin that I installed after upgrade to Firefox 11. I am running OpenSolaris 11 64 bit. I did move libplayer.so to /usr/lib/firefox/plugins and bounced firefox... but plugin not found.

IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

     My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
3. I tried to connect to other public area's free network via WIFI, however never joined in.
     I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
     I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
Terrence

I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Internal speakers not working after upgrading to Maverics

internal speakers not working after upgrading to Maverics

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

FireWire 400&800 (IMAC Core2) NOT WORKING after Upgrading to SNOW LEOPARD!

My FireWire 400&800 (iMAC Core2) are *NOT WORKING* after Upgrading to SNOW LEOPARD!
Any Solutions?
Thanks!
--Frank Strallents
www.SHOCKPROOFX.com

I'll try your suggestions....Thanks!
Recently, I try to Re-install Snow Leopard, unfortunately, still unsuccessful.
The Mybook Icon only appears if it is connected via USB.
After using Firewire and getting used to the speed...USB 2.0 is like a Corvette racing a Veyron...lol
I am not upset on these issues, it is normal for new OS to have these problems...unfortunately, even OSX is not invincible.
I'm sure Apple/Steve is on every Programers A*s for a solution.
I still think APPLE'S OSX will still be the future of Operating system!
For now, still waiting for the patch and hopefully soon.
Suggestions are still Welcome for a Solutions:-)
Frank
SHOCKPROOFX.COM

Lync mobile app will not launch after upgrade to lollipop on HTC One (M8)

Lync mobile app will not launch after upgrade to lollipop on HTC One (M8). Is this a known issue or is a fix available?

Hi THGutz,
Did you install the latest version of Lync for Android ?
The current version of Lync for Android is
5.5.3.8935.
I don’t test it on M8, but on other Android 5.0 devices it works fine.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnks

All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"

ISCSI initiator not connecting after upgradation

HI,
iSCSI initiator not connecting after upgradation from windows 2003 STD to windows 2008 STD R2 server, upgradation was successfully completed, except Microsoft iSCSI initiator connectivity, the initiaor interface show it as 'reconnecting'....!!!!!
Kindly guide on this.
Thanks in Advance

HI Shaon Shan,
Thanks for the info.
While searching for the file names start with iscsi in c:\windows\system32 folder the file version is 5.2.3790.3825 in working windows 2003 server.
Recently I've downloaded (Not yet installed) iSCSI initiator for Windows 2008 from Microsoft website in that iSCSI initiator file version shown as 6.3.4.1, instead of using inbuilt Microsoft iSCSI initiator in W2K8, shall I try installing the downloaded
version,
because when I checked in Windows 2008 (Upgraded version) the iSCSI file version remains the same as 5.2.3790.3825 which was found in windows 2003.
Post to our previous discussion
While I'm trying to install the new iSCSI initiator for Windows 2008 downloaded from Microsoft website, it shows some error "Setupcould not find the update.inf file needed to update your system" then I've updated my server, but no luck still showing the
same....!!!!

ISync not installed after upgrade to 10.4.6

Similar Messages

Maybe you are looking for