It's possible to change the device address of a NI2503 board

It would be nice to change the device address of a NI 2503 Switch board.
I have several NI 2503 Switch Boards in my PXI 1006 Chassis. After installing the boards and performing a MAX Refresh the device addresses of the boards are listed in a random (?) order. So its troublesome to get the information which device is related to which slot.
I have more than one 1006 Chassis with the same configuration of NI 2503 Boards and I may avoid to have different software versions with different device numbers for the chassis.

The short answer is no you can't modify the device numbers for the switches.
The long answer is that device numbers are set by the bios and you can't modify them. In your 1006 chasssis there are 3 buses and in each bus the devices start at some number like 15 or 20. As the slot number increases the device number decreases. The best way to view what device numbers are assigned to which slot you need to open the pxisys.ini file on your computer. The slot number and device numbers are total dependant upon your controller. The best place to verify that you have the correct ini file is to see the following webpage : PXI VXI/VME and PXI Controller Peripherals. The ini file is only an indicator of
the settings in the bios. If you change any of the devices then you will lose functionality of that board.
There is some hope though. One thing that you can do is use the IVI support for the switches. If you download the Class Drivers for switches, then you will be able to create an IVI devices and logical names in Measurement and Automation Explorer (MAX). The IVI devices will hold the address of the module (i.e. PXI0::14::INSTR). Then create a logical name that points to the IVI virtual device. This logical name can then be referenced in LabVIEW instead of the module address. Then when you need to modify the slot number/device number of a device you simply need to modify the IVI device. There is a tutorial that will step you through this process found in the Developer Zone at : Using Measurement & Automation Explorer to Configure Your IVI System
Good Luck

Similar Messages

Is there a possibility to change the email address of email alarms automatically in Calendar?

Hi,
In the Calendar app, I have a lot of events related to bussiness and I set an email alarm in each of them. But now I want to change the email address of the alarm in order to send the events to someone else. The problem is that because the number of the events is really big, I was wondering whether there was a way to change the address in all the events automatically. Is there such a possibility? Thank you in advance.

My opinion: I think you'll need to define what, to you, means "primary user". a primary user relationship can be defined manually by you one by one in the console, automatically by usage, imported via script, or the end user (if they know
how and you've allowed this in settings) can indicate a machine is a primary machine for themselves.
How is primary user relationship set, in your environment? Depending upon how that relationship is determined in your environment, then you can track for that particular machine how or why the relationship you expect to be there, isn't the relationship
the database acknowledges.
Standardize. Simplify. Automate.

It's possible to change the email address associated with the Account?

Hello,
I want to change the email address of my user in Streamwork. Is this possible? How can I do this?
Thanks & Regards
SU

I would definitely be interested in any update on this topic - I used my Gmail account to authenticate the first time I used StreamWork - yet I use a different address (own domain) for all my emails. People tend to invite me via the email address they know - not the Gmail one - so I have to tell them to use the Gmail one, not ideal!
what I would really like is to change the main email address but still have it linked to the Gmail address.
Perhaps I should see if there is an Idea Place idea for this
Thanks,
Chris

Adding a Contact Form, is it possible to change the FROM address in the header to the submitter's email address?

As it stands now the FROM address used is the site default (mine); using REPLY in the resulting email from the form should have the submitters email address not mine. I was able to switch this in the code (form-u1768.php) of an earlier version of MUSE. The PHP has changed in the current version (2014) and I'm not seeing how to pull off the same manual tweak. Any Ideas? Thanks!

I found this: Re: In adobe muse, how do you control the replyto address for a form? The site I'm working on is uploaded via FTP to another host. So, "...the email 'reply-to' header is filled in with the email address entered by whoever filled out the form, so you can hit 'reply' in your email software to reply to the form submitter." However, what if I want to take my chances on the form mail coming out of my site? Is there a tweak in the PHP that I can perform to change the FROM address to the same as REPLY-TO? Is there any reason this wouldn't work:
function get_email_headers($to_email, $form_email) {
$headers = 'From: ' . $form_email . PHP_EOL;
$headers .= 'Reply-To: ' . $form_email . PHP_EOL;
$headers .= 'X-Mailer: Adobe Muse CC 2014.1.6 with PHP' . PHP_EOL;
$headers .= 'Content-type: text/html; charset=utf-8' . PHP_EOL;
return $headers;
...vs. the way it is coded by MUSE:
function get_email_headers($to_email, $form_email) {
$headers = 'From: ' . $to_email . PHP_EOL;
$headers .= 'Reply-To: ' . $form_email . PHP_EOL;
$headers .= 'X-Mailer: Adobe Muse CC 2014.1.6 with PHP' . PHP_EOL;
$headers .= 'Content-type: text/html; charset=utf-8' . PHP_EOL;
return $headers;

HT1349 The Cloud came with my I-PHONE. Is it possible to change the email address it was set up under?

My mac book was purchased and set up a year or so ago. I purchased the i-phone, the cloud was part of that package. I set up the cloud using one of two e-mail addresses I use. Now I need to coordinate my mac and phone because everything on the mac are set up on the other e-mail address. I cannot get the updates and use the cloud properly. What is the solution?

On device: settings>iCloud, scroll to bottom of page and press Delete Account. Then enter the right one. However, any data you have synced with iCloud on the old account will be deleted on the device.

Is it possible to change the devices that are connected to my iCloud?

Hi!
When my mom first bought her ipad last year, I gave her my Apple ID so that she doesn't have to create one and so that we could share apps. However, now that we also have an iPad, we both agreed that it would be much simpler if she could have her own Apple ID. We created her a new one. However, we have discovered that she is still connected to my iCloud and we just can't figure out how to go back and unable her ipad to have access to my iCloud! (which is already used for our computers, iPad, Apple TV)
Thanks!
Manon

On the iPad, tap "settings / iCloud". You should see a way to delete the current iCloud Apple ID listed near the bottom. Once it is deleted, just add in her iCloud Apple ID.

How do I change the email address associated with a Firefox account?

I will be purchasing a new computer and want to sync my Firefox account so the new PC will have my bookmarks. The problem is the email address associated with my Firefox account hasn't been active in over a year. How do I go about changing the associated email address so I can sync my account and transfer settings to a new PC?

As of right now, it is not possible to change the email address connected to a sync account.<br>
Please create a new sync account with the new email address.
You can delete your out-dated sync account by logging in [https://account.services.mozilla.com/ here].

How can I change the device name on my iPad?

Is it possible to change the device name? I can find nothing in iTunes or Settings. My iPad was given to me with a name already assigned and I'd really like to have my name attached to it.

When attached to your computer, click the device name in iTunes and type the name you like.
http://support.apple.com/kb/HT3965

Can you change the ip address on an iPad

Just wondering if it's possible to change the IP address on the iPad?

Yes, Settings>wifi
click the small i in circle, then set as desired.
Please only do this if advised or you understand the implications associated with using static IP addresses.

How to change the web address on my iWeb page?

I was wondering if it was possible to change the web address for the page I have created with iWeb?

No you can't change it as it is made up of your .Mac account name and the name you gave the web site in iWeb. You can change the name of the site in iWeb by clicking on the site name and editing the name, but that will only change the last part of the full URL of the web site.

Changing the IP address of CUCM in a Cluster?

Is it possible to change the IP address of all the servers in a Cluster? CUCM, Unity and UCCX. What are the core dangers of doing this as I am sure nothing good can come of it. Is there any published documentation of doing something this stupid?
Thanks

And the documents can he found here.
CUCM - http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/ipchange/ipchg861.html
Unity Connection - http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug050.html
UCCX - http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices,

My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.

Yes it will, just sign out, then sign back in with the correct address.
Settings>iCloud>Sign Out.

Is it possible to change the VBAP-ADRNR item address field value?

Hi,
Is it possible to update the VBAP-ADRNR item record field value?
I am trying to update this field value from BAPI_SALESORDER_CHANGE but it is not changing the value.
I am only able to change the corresponding address for that address number.
But I need to change the address number( I want to replace with header address number) itself.
If any ideas please let me know.
Thanks,
Mohan.

ajitabap wrote:
Hi
>
> Schedule Lines related Data USING BAPISDORDER_GETDETAILEDLIST Then Pass them to BAPI_SALESORDER_CHANGE Then It work and update the field.
>
> Regards
> AJIT
eh????
What's the relevance of schedule lines and ADRNR?
@OP: Don't. There is a reason why SAP gives out a new ADRNR. And manually changing the value of a primary/foreign key is never a good thing to do.

I have a WD MyBookWorld NAS I had to change the IP address so how do I re-sync iTunes to pick up the device. The device is visible but when I click on it to display the contents i just get the spinning icon no content

Hope someone can help
As stated in the title I have a WD MyBookWorld NAS and it used to work well with itunes, it always came up in the shared area
I had to change the IP address on my NAS and now the NAS is displayed in the shared area but when I click on it for the contents to be displayed I just get the spinning "working" icon
I can access the unit via windows and my SONOS system but not through itunes anymore
Can anyone help please

Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID? (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud. Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)

HT201363 i want to change the email address for resetting my security answer.is there any possible way?

Help .changing the email address for the security answer

Hi William0413,
If you are talking about changing the rescue email address for your Apple ID security questions, you may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Regards,
- Brenden

It's possible to change the device address of a NI2503 board

Similar Messages

Maybe you are looking for