It's working ...

With all the complaining or um ... noting difficulties in working with this software ... I thought I might just post a note here that instead of pointing out a problem pointed out that for the last few days I haven't had a problem with any Adobe software at all, let alone Speedgrade. It's just been working away anytime I've been here in the studio.
A few posters over on the video lounge point out that if there were *any* satisfied users, there'd be long posts about how wonderful it all is ... there aren't, therefore ... no one's really happy.
But even as one who is quite willing to publicly note when I've got a problem or mis-understanding with this stuff, most of the time ... like now ... it just works for me. And yes I *do* feel pain for those who are having difficulties ... been there done that and for sure will be back there ... but you know, right now, it's just working? Cool.
And the folks around here that post answers are wondrously glowing examples of the finest humanity! (At least when I need 'em ... )
Neil

Shooternz,
I would also like to be able to add grading layers in Sg. Normally, I remember to make adjustment layers in PrPro before headin' out. But two things do happen ... I either forget to do so (hey, occasionally the brain just misses something ... ) and at other times, I realize I'm going to do something that I'd like to either be able to quickly apply to several contiguous clips on a sequence but not all, or realize that what I'm doing in one I'd like to be able to apply to a whole sequence separate from the normal use I make of primaries/secondaries.
At that point I just send it back to PrPro, add the layers, then go back. Doesn't take long, but it would be nice to be able to add them while still in Sg. And yes, even in my little jobs I'll oft have two to four primaries on a clip here and there, and a seconday now and then. Learning how to use those, I'll use them more often I suppose.
Neil

Similar Messages

  • Not work tablet UI on Prestigio 5080 PRO tablet

    I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

    Would it be possible for you to share the problematic pdf and OS information  with us at [email protected] so that we may investigate?
    Thanks,
    Adobe Reader Team

  • Apple Mini-DVI to Video Adapter - Can't get it to work!

    Bought the Apple Mini-DVI to Video Adapter to hook up my Macbook to my TV. I tried it when it first arrived and it worked within minutes of setting up. Great! I go to set it up and use it again a week later, and it wouldn't work at all. I went through every possible setting I could to try and get it to work, nothing. Do these things have a tendency to go out or short out or something? I'm getting nothing but scrambled screens, grey screens, etc. Nothing seems to work.
    http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY
    Any other solutions for playing my laptop on my TV?

    Hey Rob,
    Is your profile information accurate? The MacBook 2,1 was introduced in November of 2006 and discontinued in May of 2007, so the mini-DVI to video adapter ought to work.
    What, exactly, do you see on your screen? Are all of the connections nice and snug? Do you have another RCA cable you can try? You can use a white or red one if you want; they all will work as long as you're connecting the video adapter to the yellow port on the TV.
    ~Lyssa

  • Apple Mini DVI to Video Adapter is not working. Please Help...

    I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

    Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
    We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
    My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
    The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
    Dicko

  • IPod no longer works with car stereo since upgraded MBA & iTunes

    My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

    If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
    You can try to blow it clean, if you have a can of compressed air or gas.
    Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    The Reset sequence may send a signal to the Car stereo to do the right thing

  • PCS no longer working with contacts and 6086

    I have applied the latest release of PC Suite 6.84.10.3.
    Previously the installed level was 6.83.14.1
    The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
    But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
    (translate it from french: The contact has been well recorded into the phone)
    Folder browsing still works correctly, either the phone folder or the memory card folder
    Need a fix or a way to install the previous version, at least for the contacts...
    This is a really negative feedback!
    Phil

    I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
    WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
    Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
    Now we have the functionality that we wanted, right?

  • Brand new IPOD Touch Apps no longer work after upgrading software

    I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
    Message was edited by: 2009 IPOD TOUCH

    I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
    The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
    Message was edited by: IPatronius

  • Itunes incurred an error and no longer works?

    Hello, I have windows XP one day while snycing my Ipod 160G I tunes stopped working and now gives me a message everytime I try to open it saying
    "iTunes has encountered a problem and needs to close.
    We are sorry for the inconvenience."
    Send error report? or Dont send?
    Does anybody know how to go about working on this error without loosing all the music I've already downloaded? HELP ME!!!!

    My iPhone is having a similar problem, but I think it is caused by a different module. It will sync everything except my music library. It starts to sync and crashes. Over and over. Any ideas would be greatly appreciated. This is the error report:
    Product
    iTunes
    Problem
    Stopped working
    Date
    9/4/2010 10:44 PM
    Status
    Report Sent
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.0.0.68
    Application Timestamp: 4c7e6c10
    Fault Module Name: QuickTime.qts
    Fault Module Version: 7.67.75.0
    Fault Module Timestamp: 4c61425e
    Exception Code: c0000005
    Exception Offset: 0082e666
    OS Version: 6.0.6002.2.2.0.256.6
    Locale ID: 1033
    Additional Information 1: 9c79
    Additional Information 2: 18d391556384f03f39cb1810be4919d6
    Additional Information 3: cbd8
    Additional Information 4: 7823eb2f440e23b0eb8dcc58dcf1c44e
    Extra information about the problem
    Bucket ID: 2015804932

  • HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

    i have tried:
    reloading itunes
    unchecking 'write'
    removing lower filters in regedit
    ensuring i had the correct 'gear' info in the upper filters in regedit
    removing 'gear' from regedit, system32
    reloading updated version of 'gear'
    cleaning my registery
    deleting itunes
    cleaning registry again
    reloading itunes
    cleaning registry again
    i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
    i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
    when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
    the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
    and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
    the above is not the case as it also popped up for me to import cd to itunes.
    i tried to copy and past the entire contents here but it would not allow me to paste.
    please help!

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

  • [Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

    This is a copy of a post from my blog, you can also Read it on my blog...
    Introduction
    After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
    There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
    But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
    This guide may interest you if:
    You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
    You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
    What this guide will make you do:
    It will make you erase all your data from your external USB3/Thunderbolt hard drive
    It will make you install Windows on your external USB3/Thunderbolt hard drive
    It will make you install bootcamp drivers
    What this will not make you do:
    It will not make you modify anything on your internal Mac hard drive
    It will not make you use or install the bootcamp assistant
    It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
    What you'll need
    An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
    A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
    One of the following:
    Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
    A PC running Windows 7 or 8 → Read the important note below
    Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
    Download imagex.exe
    Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
    Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
    A USB stick to store your bootcamp drivers
    IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
    Step by Step guide
    Step 1: Get the install.wim file
    If you have a Windows ISO file:
    Mount the ISO
    If you're on OS X: double click on the ISO file
    If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
    If you're on Windows 8: double click on the ISO file
    Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
    IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
    Step 2: Clean, partition and format your external hard drive
    On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
    Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
    Type the following and hit enter to open the disk partitioner utility:
    diskpartType the following and hit enter to list your drives:
    list disk
    This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
    select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
    clean
    Create the boot parition by typing the following followed by the enter key:
    create partition primary size=350
    This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
    format fs=fat32 quick
    Set this partition to active by typing:
    active
    Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
    assign letter=b
    Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
    create partition primary
    Format the new partition in NTFS:
    format fs=ntfs quick
    Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
    assign letter=o
    Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
    exit
    Step 3: Deploy the Windows installation image
    Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
    Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
    imagex.exe /apply C:\wim\install.wim 1 o:
    This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
    o:\windows\system32\bcdboot o:\windows /f ALL /s b:
    If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
    If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
    Step 4: Boot from your external drive and install Windows
    Plug in your external drive:
    If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
    If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
    Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
    On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
    The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
    Step 5: Install bootcamp drivers
    Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
    Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
    Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

    Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

  • Why self-defined access sequences of free goods can not work?

    Hi gurus,
    I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
    when i used the standard access sequences ,it is OK .
    Can anybody tell me why?
    thanks in advance

    Dear Sandy,
    Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
    Make sure that these fields are flowing in your sales order.
    I hope this will help you,
    Regards,
    Murali.

  • New DC without netlogon share is not working.

    Hello all,
    I have a brand new DC  (server 2012) that I joined to my domain and it is not behaving. It is a clean install plus the directory services role, the static IP and the promotion, nothing else. The domain has one more DC (server 2012) and it is functioning
    properly. The DNS servers of the new DC are the working DC and 127.0.0.1 as secondary. The time is the same, the name is new on a new install of windows (no images, no cloning, no restores). The promotion completed successfully with the initial replication
    (it said).
    Here is the output of dcdiag:
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = IL-DC2
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\IL-DC2
          Starting test: Connectivity
             ......................... IL-DC2 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\IL-DC2
          Starting test: Advertising
             Warning: DsGetDcName returned information for \\MD-DC.mydomain.com, when we were trying to reach IL-DC2.
             SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
             ......................... IL-DC2 failed test Advertising
          Starting test: FrsEvent
             ......................... IL-DC2 passed test FrsEvent
          Starting test: DFSREvent
             There are warning or error events within the last 24 hours after the SYSVOL has been shared.  Failing SYSVOL
             replication problems may cause Group Policy problems.
             ......................... IL-DC2 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... IL-DC2 passed test SysVolCheck
          Starting test: KccEvent
             A warning event occurred.  EventID: 0x80000481
                Time Generated: 03/06/2014   05:07:50
                Event String: Internal event: The following schema class has a superclass that is not valid.
             A warning event occurred.  EventID: 0x80000481
                Time Generated: 03/06/2014   05:07:50
                Event String: Internal event: The following schema class has a superclass that is not valid.
             A warning event occurred.  EventID: 0x80000481
                Time Generated: 03/06/2014   05:07:50
                Event String: Internal event: The following schema class has a superclass that is not valid.
             A warning event occurred.  EventID: 0x80000B46
                Time Generated: 03/06/2014   05:09:43
                Event String:
                The security of this directory server can be significantly enhanced by configuring the server to reject SASL
     (Negotiate,  Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple
     binds that  are performed on a cleartext (non-SSL/TLS-encrypted) connection.  Even if no clients are using such binds,
    configuring the server to reject them will improve the security of this server.
             ......................... IL-DC2 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... IL-DC2 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... IL-DC2 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... IL-DC2 passed test NCSecDesc
          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\IL-DC2\netlogon)
             [IL-DC2] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
             ......................... IL-DC2 failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... IL-DC2 passed test ObjectsReplicated
          Starting test: Replications
             ......................... IL-DC2 passed test Replications
          Starting test: RidManager
             ......................... IL-DC2 passed test RidManager
          Starting test: Services
             ......................... IL-DC2 passed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 03/06/2014   04:20:58
                Event String: The WinRM service is not listening for WS-Management requests.
             A warning event occurred.  EventID: 0x000003F6
                Time Generated: 03/06/2014   04:50:41
                Event String:
                Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers r
    esponded.
             A warning event occurred.  EventID: 0x000003F6
                Time Generated: 03/06/2014   04:50:41
                Event String:
                Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers r
    esponded.
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 03/06/2014   04:51:32
                Event String: The WinRM service is not listening for WS-Management requests.
             An error event occurred.  EventID: 0x00001001
                Time Generated: 03/06/2014   04:56:46
                Event String:
                The machine IL-DC2 attempted to join the domain mydomain.com but failed. The error code was 1332.
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 03/06/2014   04:58:07
                Event String: The WinRM service is not listening for WS-Management requests.
             An error event occurred.  EventID: 0x0000271A
                Time Generated: 03/06/2014   04:58:06
                Event String:
                The server {9BA05972-F6A8-11CF-A442-00A0C90A8F39} did not register with DCOM within the required timeout.
             A warning event occurred.  EventID: 0x00001796
                Time Generated: 03/06/2014   04:59:21
                Event String:
                Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and t
    his server. This event occurs once per boot of the server on the first time a client uses NTLM with this server.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:00:09
                Event String:
                Driver HP Universal Printing PCL 6 required for printer HP Universal Printing PCL 6 is unknown. Contact the
    administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:00:09
                Event String:
                Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact t
    he administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:00:12
                Event String:
                Driver HP Universal Printing PCL 6 required for printer HP Color LaserJet CM1312nfi MFP (192.168.2.20) is un
    known. Contact the administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:00:12
                Event String:
                Driver Microsoft XPS Document Writer required for printer Microsoft XPS Document Writer is unknown. Contact
    the administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:00:13
                Event String:
                Driver PrimoPDF required for printer PrimoPDF is unknown. Contact the administrator to install the driver be
    fore you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:00:13
                Event String:
                Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the
     administrator to install the driver before you log in again.
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 03/06/2014   05:08:51
                Event String: The WinRM service is not listening for WS-Management requests.
             A warning event occurred.  EventID: 0x00001796
                Time Generated: 03/06/2014   05:12:17
                Event String:
                Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and t
    his server. This event occurs once per boot of the server on the first time a client uses NTLM with this server.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:13:02
                Event String:
                Driver HP Universal Printing PCL 6 required for printer HP Universal Printing PCL 6 is unknown. Contact the
    administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:13:02
                Event String:
                Driver Microsoft XPS Document Writer required for printer Microsoft XPS Document Writer is unknown. Contact
    the administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:13:03
                Event String:
                Driver HP Universal Printing PCL 6 required for printer HP Color LaserJet CM1312nfi MFP (192.168.2.20) is un
    known. Contact the administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:13:04
                Event String:
                Driver PrimoPDF required for printer PrimoPDF is unknown. Contact the administrator to install the driver be
    fore you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:13:04
                Event String:
                Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact t
    he administrator to install the driver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 03/06/2014   05:13:05
                Event String:
                Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the
     administrator to install the driver before you log in again.
             ......................... IL-DC2 failed test SystemLog
          Starting test: VerifyReferences
             ......................... IL-DC2 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : mydomain
          Starting test: CheckSDRefDom
             ......................... mydomain passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... mydomain passed test CrossRefValidation
       Running enterprise tests on : mydomain.com
          Starting test: LocatorCheck
             ......................... mydomain.com passed test LocatorCheck
          Starting test: Intersite
             ......................... mydomain.com passed test Intersite
    I also have the following event:
    Log Name:      System
    Source:        NetJoin
    Date:          3/6/2014 4:56:46 AM
    Event ID:      4097
    Task Category: None
    Level:         Error
    Keywords:      
    User:          S-1-5-21-1062633599-3710215183-3313947919-500
    Computer:      IL-DC2
    Description:
    The machine IL-DC2 attempted to join the domain mydomain.com but failed. The error code was 1332.
    Although the machine joined the domain, it is listed with the appropriate records and promoted. 
    Can anybody help me get a second DC for this domain running? It is kind of urgent... I tried demoting/promoting, reinstalling, I tried to do a non-authoritative restore, however, I don't have the appropriate registry key... I saw the various different posts
    on similar issues, please do not paste them as I read them and I was not able to solve this.
    Thank you in advance for any responses!
    Best regards,
    Irina

    Umar,
    Thank you big time for your time and help today. After we finished talking I tried the authoritative restore (vs non-authoritative the first time - didn't help) and then I started over (one more time) and created one more DC. Before promoting it I disabled
    the firewall and the user control in order to make sure nothing is stopping it. I also triple checked the time. I promoted it without the DNS server and Global Catalog functions. I faced the same wall. After the promotion the SYSVOL and NETLOGON shares were
    still not there. 
    After hours of more reading I finally found this:
    http://social.technet.microsoft.com/Forums/en-US/58b8cdc3-a990-46c7-a70e-a51fd6965537/sysvol-and-netlogon-shares-missing-from-new-domain-controllers-using-dfrs?forum=windowsserverpreview
    and it saved me. So I followed this guy's steps and my system shares showed up on both new DCs. Then I had to wait one more hour for everything to get in sync and after that I successfully shut down my main DC and the other two took over. 
    Thank you again for the help!
    Best regards,
    Irina

  • Adobe bridge raw not working with windows vista in photoshop cc, why?

    adobe bridge raw not working in photoshop cc, is there a fix?

    Your sure your using photoshop cc on windows vista?
    I was under the impression that photoshop cc would not even install on windows vista.
    What version of camera raw do you have?
    In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
    (click on the words Camera Raw to see the version)
    Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
    What camera are the camera raw files from?
    Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

  • Adobe Bridge CS5 in windows 7 not working?

    Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
    Tried to install creative cloud..again some error. Error code : 82
    Could you please advice how I can fix my adobe bridge.

    https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
    please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

  • ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • Adobe Muse APTEE Licensing NOT WORKING!!

    Hi,
    I am an IT Professional working for a major University in Missouri. We have an Apple computer lab of 26 20" iMacs, all running Adobe Creative Cloud with an Enterprise license. This license includes Adobe Muse (with its own serial number). We use Active Directory to manage users/group policies on all computers, and manage users on our Apple computers.
    According to Adobe's support site, you can create a prov.xml file using APTEE and then apply it to serialize the Muse product installation for a computer lab environment.
    I can only get this to work for EXISTING users. When a NEW user logs in to his or her account, they run Muse, and it asks for a subscription, as though Muse is not serialized. According to Adobe, you click on Existing Subscription anyway, enter your Adobe ID, and then it should still open. It doesn't..........it says the "subscription does not have a license for Adobe Muse" and gives the option to BUY or QUIT.
    HELP!!!!!
    MissouriSpartan

    If I remember correctly, I would advise you to update your Creative Cloud Packager and recreate the deployment package. More, at http://helpx.adobe.com/creative-cloud/packager.html
    If you are still having issues, check in the proper forum: http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
    Or contact Adobe support.

Maybe you are looking for

  • Please help me to solve this problem.

    Hi , can someone help me to solve the following problem: 1) I wrote two different client and server program, (Using UDP) 2) In the server side for testig I wrote some code like when a client sending message to server a) server find on the database on

  • Apple TV 3 streaming

    Kann man mit Apple TV 3 Inhalte von einem Netzwerkspeicher (NAS) streamen.

  • Connecting laptop (XP) to Yoigo with 6310i (open)

    From a Bluetooth DUN icon I can get the phone to start to access the network. In 'Navegador' mode (wap browsing, I think, this is a Spanish service) it works fine, so I have money on the SIM card and can connect via my phone without Bluetooth. So Blu

  • Manual Revenue Process

    Hi All, I am new to this Order Management. I have a requirement to calculate Revenue with a new system. So I want to know about Manual Revenue Recognition. On what basis Manual Revenue line will be Completely Delivered or Pertially delivered or Un de

  • HELP!  Can't open/build project!

    I have an error in the constructor for one of my JSP support classes (e.g. MyPage.java) that built and saved before I closed creator last time. Now, when I try to open the project, the Creator log shows the bug is being hit as Creator tried to render