It seemed to me as a common problem with Inspector..

..what I wanted to do is to synchronize an image file with an mp3 file and upload it to youtube. I've managed to export the file as a quicktime .mov file, but there were pops and clicks in the audio. After some searching I've found a possible solution, namely that I have to adjust the speed to 100% instead of anything else. Now, unfortunately I can not find out if this is the issue because the inspector is not showing the option for speed adjusting. I've also searched a solution for this problem -it was written, that
A/ I have to enable in Preferences th advanced tools option -check
B/ I have to copy the project into the window -obviously check
C /it works only with imovie 9 -check
still, no solution :/ After opening inspector the only two options there are duration and audio (video) effect.
Am I missing something very basic?
thank you,
G.

Turn off Voice Over in the Accessibility section of AppleTV Settings.

Similar Messages

Is this a common problem with the Samsung Nexus Phone

Going on my 3rd phone. The first brand new phone after 6
months would not allow the battery to be charged. The 2nd phone replaced under warranty
dropped calls and would not connect to the net. I am now waiting for the 3rd warranty
replacement phone. At this point I don't feel to good about my Samsung Nexus
Phone.

It was a Verizon customer service person who told me that this is a common problem with Samsung Nexus model phones. From what you are saying that is not the case. As you suggested the store did change the sim card
at no cost to me. Unfortunately it did not resolve the problem. The Brookfield Connecticut Verizon store could
not resolve the problem and said "it was a phone problem not a service problem." The local store and the Verizon national customer service would not exchange the phone or cancel the service without an early termination penalty.
The phone was sold to me by Verizon at a discounted price. I signed a 2 year service contract because of that promotional. I think Verizon and Samsung have a shared responsibility for the operation of the phone. Verizon customer service implied that there responsibility was limited to the service only. I say not so when you use it as a promotional tool to sell your service. I contacted Samsung tech service and they have accepted the reasonability of fixing the problem. Verizon needs to fix there problem with customer service and get all there people on the same page.

Steps to troubleshoot and get past common problems with Audition

When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
     This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
     Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
     Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
     Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
     Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
          * "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
          ** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
     To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
     Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
     OS X: launch /Applications/Utilities/Console.app   Clear the view, then launch Audition and note any error messages that appear.
     Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
     If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
     So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.

Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!

Are these common problems with the 3g?

So I had the old iPhone and absolutely loved it! I get the new one after waiting a few weeks so there was actually some available. Anyways, I had some problems with it when I got it and took it to my local apple store and they fixed is supposedly! Problems eventually came back! So I called apple and talk to a tech. He advised me to send it in and get a new one. So I payed the 20$ to get a new one. The new phone ended up great and worked just fine now the same problems have come back! The problems consist of, the text ring going away after about an hour or restarting the iphone, the ringtone not working sometime, it freezing a lot, simple little things like that, plus more.
Basically im really irritated that the huge iphone 3g that was the newest fastest phone to come out has little things like this that have yet to be fixed. What is apple going to do about this and when??

Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!

In desperate Need of support of an all too common problem with the xt912's

https://vzwsupport.jive-mobile.com/#jive-discussion?content=%2Fapi%2Fcore%2Fv2%2Fdiscussions%2F808263
First off,i tried to reply to the above link/thread,because my issue is IDENTICAL,so this below post,is what i tried to wright into the reply,though it wouldn't work...
Hello, Please forgive me rehashing an old thread, but due to the fact that this is the identical-odd situation needed to reply to this....
We have the xt912 and just got it back on refurb, for another one that had this identical problem. So we have had 3 of these,and two have had this same horrible issue.And it already is having these problems and we just got it not long ago....The hdmi/rotate-screen issue IDENTICAL to this....
We have already had another Xt912 with the same exact issues,so no offense,this problem is getting very old.
Could you please check my imei (it’s my sons phone) and possibly see if there is something you can do for us? the phone is at the point to where it’s not safe for my son, as he needs to call us from his middle school sometimes, but it’s to the point to where this isn't even working anymore. The screen won’t turn and the dock message keeps coming up. I've tried 4+ hard resets, And these droids are getting very disheartening... Especially with how much money we spend with you, versus some of our straight talk phones...
Please let me know, and many thanks
My name is Jacob and its best to reach me at my email (removed)
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator

dovedescent7,
I am sorry to hear that you are having problems with your son's phone. I know you stated that you have reset his phone many times. Have tried running the device in Safe Mode? http://vz.to/JOEri7 are the steps to put it in Safe Mode. Safe Mode tells us if it is an application error or the device.
Thank you,
RobinD_VZW
Follow us on twitter@VZWSupport

Common problem with inventory...but urgent...!!!

I have very basic problem with inventory data. Getting negative data...
The steps i followed are below:
1)After doing the initialization of BX using MCNB transaction I loaded the data in BW(till PSA level).
2)Initialization of BF(historical data) and loaded in BW(till psa level)
3) Upload the data with BX using DTP and Compress it with "Marker update" in the cube.
4) Upload the data with BF(historical data)using DTP and Compress it with "No Marker update"
5) Upload the data with UM(historical data)using DTP and Compress it with "No Marker update"
Now in the report I am getting wierd negative values in total stock (non cumulative key figure)
Can anyone suggest if I am missing some step or doing something wrong.

Hi,
I recall reading some OSS notes on this issue. Search on OSS as there is a setting in the IMG you need to make sure you have done.

Problem with Inspector pull-down menus

I have this weird problem with DVD Studio Pro all of a sudden. I'm wondering if a recent update might have broken something, and how I can fix it.
The problem is that certain pull-down menus in the Inspector are not responding anymore. Important ones too, like "set target" and "end jump," Remote Control functions, as well as ones I don't use as often like Shape (button shape?). I click on them and nothing happens, although sometimes the default "not set" text disappears. These menus are in the same place in the Inspector, so this may or may not have something to do with it, I have no idea.
At any rate, I can't make a DVD without these functions, and I usually need to make a DVD once or twice a week. Although it has been two weeks since I last used it.
I am almost positive that nothing has changed with my system since I used it last, besides Apple Software Updates.
Version 2.0.5, OSX Tiger. I know, time to upgrade, but I don't control the budget.

Just the Inspector, i haven't found any other problems.
Quicktime was updated a few days before the problem started. On May 27th I ran the updates for Quicktime 7.4.5, ProKit 4.5, iTunes 7.6.2, and Safari 3.1.1. I noticed the problem with the DVDSP Inspectors the next time I ran the program on May 29.
I understand the ProKit is for a later version so I'm a bit mystified as to why I was offered the update, however I've installed previous ProKit updates without any problems.
A clean install will certainly be my next step. But I have to wait for a lull in real work activity before I can get into that. Luckily I've remembered that I can accomplish a lot of what I needed the inspector for under the Connections tab, so it's a little less urgent now.
I'm usually pretty careful about running updates, and I usually ignore them for a few weeks (or longer) before I run the updates so I can monitor the internet for other people's disasters. But I got lazy this time. Maybe there are not too many DVDSP v2 installations out there. And maybe I need to increase the pressure on my company to update my software!
On that note, this experience is helping my case with convincing them to replace one of the old Avids with a new FCS suite, so it might become a moot point. Will the license allow me to operate DVDSP4 on a different machine or does it have to stay on the main suite, if we go that way? We like to process the output on another box, so the editors can get on with the next project.

BSOD when using FF. Have reinstalled twice. Is there a fix yet? This seems to be a common problem with users of W7 32 bit & 64 bit.

I get the blue screen within 10 seconds of getting on the internet. This does not happen with IE. I have upgraded my graphics card, I have all of the latest windows updates and Fire Fox updates, I have reinstalled the OS and I have reinstalled Fire Fox twice. My platform is W7 32 bit. I will add that Fire Fox crashes on a fresh install of the OS with no apps, no other installed software, no printers or other devices connected, only Fire Fox and IE are installed, so I have ruled out software conflicts. I have also ruled out bad ram and my graphics card as this only happens when I'm on the net using Fire Fox.
I believe this is a compatibility issue with Fire Fox's latest update. Anyone agree, disagree, have any thoughts, please share. Thanks.

Firefox is what is called a [http://en.wikipedia.org/wiki/User_space User Space Application], ''(for application software)'' it alone cannot cause a BSOD. Bluescreen can only be caused by Kernel Space applications (like your Firewall and most device drivers). While these applications may have hooks into Firefox that are buggy, Firefox by itself can't cause a bluescreen.

What are the common problems with the 15 inch 2.16 Macbook Pro Core 2 Duo?

I have been reading in the forum and have noticed that some of the MBP C2D have a few problems (wireless, screen, etc). I just want a list of things to look for if I get one. I have learned from the past to get it fixed fast, or else Apple does not prioritize it as well. Thank you.

got mine in october.
imo(and other pc converts as well) it hardly lives up to the hype+pricetag.
First/second/third iteration...it runs hot and slow.
Compared to what? Any other macs? Can't say. Compared to my experiences with other pc notebooks...that's where I'm coming from.
Author was looking for feedback from MBP owners.
2cents submitted.
Author didnt specify..'issues with MBP as compared to other Apple computers', I don't think anyway.
A company makes a major shift with it's hardware, and expects the software that pre-exists will smoothly transition...is a rush job if you ask me.
I just feel it would have been better, having been released with a FULLY compatible os.
cheers
macbook pro 15" Mac OS X (10.4.8) i hate it
macbook pro 15" Mac OS X (10.4.8) i hate it

Anyone having trouble with this phone and their in car bluetooth? Calls dropping not recognizing the device. Had the car bluetooth reset at dealer. They said it is a common problem with the iPhone?

Bluetooth in car is not recognizing my device and when it does it will only stay connected about 5 minutes. Blue tooth has been reset at the dealer. They said it is very common with the iPhone? The car is a 2014 Toyota Highlander. This is very very frustrating as I have a 45 minute commute to work and do not want to have to hold my phone.... Thank you for any help.

sstaylor2001 wrote:
I have already done all of that. It still doesn't work. My husband has the same phone and a 2013 toyota and his is fine. Toyota told me it is the brand new cars and the new apple update. Need to figure something out. This phkne is useless now and I've had a iPhone for 5 years
Wow you would think the newer car is just an updated version of what your husbands has.
I wonder if your husbands car was updated to the same connect system if his would not connect?
Does your husbands phone work because he does not have the new iOS from Apple?
Can he hook to your connect system in the car?

HT201699 I'm using an iPhone 4 which i purchased last month, there seems to be some kind of problem with the mobile data network

Hi,
I bought a new iPhone 4 last month, totally fell in love with it untill there was this problem regarding the apn disappearing. I manually added the apn info and it worked fine for some time but soon after I disabled the mobile data/3g connection and enabled it later I always use to get a msg saying "Could not activate mobile data network" even after it being active( 3g symbol always used to be poped up at the top). Though the apn is filled with a valid data it shows me the same msg over and over again. It some times works on rebooting but the rebooting the handset everytime i want to use the connection sounds very pestering. Please suggest me with somehting to get rid of this problem...

https://discussions.apple.com/message/21946322#21946322

I have a common problem with the iPod Touch.....has anyone figured it out??

Frequently when listening to music, browsing safari, or playing videos, my ipod touch will stop abruptly and return to the home screen without reason. Shutting down the iPod is a quick fix, but within a half hour the same problem arises again. Has anyone found a permanent solution to this problem? If not, does anyone know if there is a scheduled ipod software update to fix the problem? Thanks a lot!!

If you are listening-browsing-watching the same time it looks like there is not enough memory for the iPod and it closes applications being run
* 15th January?

Why is my Pages and Numbers no longer working? Seems they both now have a problem with the latest Mac OS X Update

Hi
I Have a Macbook Pro and always update the OS so it is current. It is now Mac OS X Lion 10.7.4 (11E53)
I purchased a copy of Pages and Numbers online a few months back and had no problems using them. Pages version is 4.2 and Numbers is 2.2
Today they both give me the same message - 'Pages cannot be opened because of a problem' - it then asks me to report it to a Developer.
It says I may need to re-install the software - but how do I do this if I purchased it via the online Appstore? Here's the first few lines of the report;
Process:         Pages [308]
Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier:      com.apple.iWork.Pages
Version:         4.2 (1008)
Build Info:      Pages-10080000~1
App Item ID:     409201541
App External ID: 3911467
Code Type:       X86 (Native)
Parent Process: launchd [133]
Date/Time:       2012-08-06 23:27:56.061 +0100
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Any help would be appreciated.
Has this happended to others?
Thank you
Regards

Re-installing Pages through Appstore has fixed the problem.
Thank you

Any common problems with Japanese sub-titles?

Hi one and all,
I have been asked to take on a project involving adding Japanese sub-titles to a series of videos. The translation will be provided (so I will have access to the Japanese text to create the titles), however I have never worked with Japanese Kanji inside of Premiere Pro (7.2.2). Therefore I was just wondering if anybody in the community could let me know if there are any common pitfalls I need to look out for when using non-Roman alphabets in titles?
I have not imported any fonts for this so far. Kanji appears to display fine in the title window when pasted in and it exports fine as well.
Any advice on this would be greatly appreciated before I say 'yes' and then find myself in a world of headaches.
Many Thanks
Josh

Since post lacks information on what you have exactly done it could be useful to reiterate some points.
In GNOME3 IBus should work from the box, provided you installed input method and added it in system settings (I use kkc). GNOME breaks all other input methods except IBus, so that is your porbably best shot.
In other DE (or we should say more generic method) you should set environment variables and start input method daemon. For KDE and MATE (I start X with sddm) I put in .xprofile
export GTK_IM_MODULE=fcitx
export QT_IM_MODULE=fcitx
export XMODIFIERS=@im=fcitx
fcitx -d -r
local/fcitx 4.2.8.5-6 (fcitx-im)
local/fcitx-configtool 0.4.8-1
local/fcitx-gtk2 4.2.8.5-6 (fcitx-im)
local/fcitx-gtk3 4.2.8.5-6 (fcitx-im)
local/fcitx-kkc 0.1.1-1
local/fcitx-qt4 4.2.8.5-6 (fcitx-im)
local/fcitx-qt5 0.1.3-1

Problems with turning on iphone5

Hi folks,
My iphone5 was fully charged when its screen all of a sudden went blue (it is brand new, has been only 5-6 days in use). I was able to turn it off but now can't turn it on. Tried charging for half an hour, holding both the power and home bottons for 30 or 40 secs, itunes doesn't recognize it since it will not turn on. Nothing helps. What should I do? Can't take to the store to get repaired - not in the US. any help? seems like it's a common problem with iphones.

Without knowing any errors it is impossible to determine exactly what happened. If you are concerned about the phone you can always make an appointment with a genius bar at your local Apple Store for them to check it.

It seemed to me as a common problem with Inspector..

Similar Messages

Maybe you are looking for