It was found an error in the OPF file: The file is not stored in Cover guide .

Hi,
I have found errors when uploading the ePub 3 fixed layout classic ebooks on Apple.
It was found an error in the OPF file: The file is not stored in Cover <guide>. To ensure the navigation on Kindle devices, you should correct that.
Please help me?
Thanks,
CK

Thank you but please help me solve this problem.
Kindly look at the below error:
It was found an error in the OPF file: The file is not stored in Cover <guide>. To ensure the navigation on Kindle devices, you should correct that.
Please let me know how it will solve.
Thanks,
CK

Similar Messages

It was found an error in the OPF file: The file is not stored in Cover guide . To ensure the navigation on Kindle devices, you should correct that.

Hi,
I have found errors when uploading the ePub 3 fixed layout classic ebooks on Apple.
It was found an error in the OPF file: The file is not stored in Cover <guide>. To ensure the navigation on Kindle devices, you should correct that.
Please help me?
Thanks,
CK

Thank you but please help me solve this problem.
Kindly look at the below error:
It was found an error in the OPF file: The file is not stored in Cover <guide>. To ensure the navigation on Kindle devices, you should correct that.
Please let me know how it will solve.
Thanks,
CK

Crystal Reports for Enterprise 4.1: Error while saving report to BI platform "There was an unexpected error saving your report to the server. Please try again or contact your administrator if the problem persists."

Hi All,
I am able to create a report in Crystal Reports for Enterprise 4.1 on top of an OLAP connection (data source BEx query). However, when I am trying to save this report to BI platform, I am running into the following error:
The error was not resolved even after applying the following SAP KBA notes:
1676033
1709390
1922003
1727813
Below is the excerpt in the error log (on the path mentioned in SAP NOTE: 1709390),
However, could not make much sense out of it, as to how can the issue be resolved. If anyone has useful insights on this issue, please share the same with me.
Regards,
Alston

Hi Alston
Since you have CR for Enterprise then you also have BI and thus most likely you also have an S user ID. You can use the S user ID to create a phone incident at it is part of your Enterprise Support Package. Just saying as this may be the most efficient way of proceeding at this time(?). But please don't take as me trying to push you off of SCN .
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Whenever I log into iCloud, it says that there was an unexpected error upon logging in. Please help! (Note: My Apple ID is a Yahoo ID.

(nothing else)

Morning ksahu2002,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Best of luck,
Mario

Error when RFC adapter calling the BAPI

Hi freinds
Today when I was executing my scenario ( File -- XI -- RFC ), I got following error ::
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_BAPI_POS_AUTOMATION in remote system (RfcClient[RFC_Connection_SAPR3_DEV]):com.sap.mw.jco.JCO$Exception:(104) RFC_ERROR_SYST
Before this error I executed my scenario 2-3 times without any errors.
I found that in RWB the message status was "Waiting". SO I checked the Component monitoring & found this error in Self Test Status ( the symbol was RED )-->
java.lang.ArrayIndexOutOfBoundException: -1 ( Not copied from the original error message )
I clicked the "Repeat Self Test" button & the status become green so I checked my message again. Now it was successfull but in 2 retries it was giving the JCO error & after the Self test ( 3rd retry) it went fine.
I didn't change anything else other than Self test.
This happened two times with me today. Can anyone tell me the reason behind this & what will be the permanent solution of
this. Is this related to some memory dumping ? Is their anything like clearing memory for adpaters in XI.
Best Regards
Lalit

Could you pls check whether a short dump occured in the target system.
Go to ST22 in the target system and check.
Thanks,
Renjith

Code Inspector Issue - "MODIFY - without TRANSPORTING was found in line "

Hi all
I am new to abap and my transports are unable to move further because of code inspector error
"MODIFY - without TRANSPORTING was found in line ". Help me resolve the issue.
For example
LOOP AT i_user_add.
    i_user_add-mandt = sy-mandt.
    MODIFY i_user_add.
ENDLOOP.
<removed_by_moderator>
Edited by: Julius Bussche on Oct 16, 2008 3:23 PM

Hi ,
       while modifying the internal table specify wich field you are modifying
modify <internal table > from <work area> transporting <fields>.
regards
naveen

Message:Row without tax was found

Sir,
When i try to make A/P Invoice for an interstate purchase against Form C, in that i give unit price inclusive of tax (i.e total amount including tax), so tax is not applicable for that ... so, i leave the tax code field blank,,and when i try to add the document, it give me mesaage"Row without tax field was found"... What could be the reason??

Hi,
I think you should fill it with Tax Group: Zero Rate, please do not leave it blank. And also check in tax group setup, tax account code should not be blank for each tax group.
Thanks and regards

IWork encountered an error while attempting to create the attachment data.

Can anyone please help with this error? I recently upgraded to Mavericks - I am guessing this is a problem linked to it.
I look forward to getting any pointers on rectifying this.

I was trying to run Share -> Send via Mail -> Word, this would attach the pages as word document in the Mail. After Mavericks installation it throws an error.
For what it is worth-
I sought technical help from Apple on the telephone - they asked me to create another user profile with Administrator status and restart the machine. After the restart and upon accessing the pages application the update for pages showed up. I am yet to update the pages, but I was told this error would be solved upon the update. Then you can delete the new user profile created for the purpose. I will complete the process tomorrow and post the outcome.
All this round about because the pages after mavericks update wouldn't ask for the update automatically with the Old user profile (administrator). Alternatively, I was also asked to try uninstalling the iWorks and do a fresh installation.

Ipad2 shut off after down the battery but when connect the charger my ipad2 is not storing the power in the battery and i also not finding the error code ???

ipad2 shut off after down the battery but when i connect the charger with my ipad2, its not storing the power in the battery and i also not finding the error code ???

If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options.

BME-00600: The UML Package ... could not be resolved - When opening diagram

Hi everybody,
when opening an existing activity diagram we are receiving the error below. The files are present on the filesystem. Other diagrams like database diagram could be opened with no problems.
We are using JDeveloper version 10.1.3.0.3 (Early Access / Win XP).
Any ideas?
Thanks,
Marcus Kresin
Message
BME-00600: The UML Package cargo could not be resolved
Cause
The element may have been moved or deleted from the file system, or the Model path, source path or classpath may be incomplete. This error can also occur when the element was found, but errors in its definition prevented it from being loaded. Examine the error stack for further information on the exact cause.

Hi,
I am not sure how you got into that state; but you should be able to work around it my creating the missing packages in the navigator. Simply go to New -> Gallery -> General -> UML -> Package. Once in place the diagram should now open.
Thanks,
Gerard

Data not saved in the table (for the field created through AET)

Hi,
I have created few fields using AET for a transaction type.
The fields are created successfully and we are able to add them in my custom config.
I followed step by step the following link The New AET table Extension Feature of Ehp1- Creating your own components
However the values of these fields are not stored in the ZTable.
I had defined Form view ( 1:1 cardinality) within the wizard itself.
Help!!!
Regards
Omar BB

Hi,
Check whether your ZRelation Depenedent object entity is getting filled or not.....after input some values.....
Regards,
Sumeet

Is it possible to change the name of the characteristic after the PA is act

Is it possible to change the name of the characteristic after the PA is activated?
If yes what should I do?

Hi,
yes its possible and it works in the same way as the creation of a new characteristic / assigment to an up- and running operating concern.
Thats because the "name" of a characteristic is not stored in a text table but it is the field label of the data element.
Search in the SDN forum if you are unsure how to do that.
Best regards, Christian

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

When I try to open up a PDF document, i get the following error message: "There was an error opening this document. The network path was not found" AArrgh please help as I need to open up my documents. Thanks.

When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.

The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

It was found an error in the OPF file: The file is not stored in Cover guide .

Similar Messages

Maybe you are looking for