ITAB_NON_NUMERIC_COMPONENT" in the "generation of scrambling programs for non-cluster tables

Dear Experts,
We have are experiencing issues in standalone scrambling,
we are getting error" ITAB_NON_NUMERIC_COMPONENT" in the "generation of
scrambling programs for non-cluster tables"
Please help with the needful
urgently.
Thanks

Hello,
Implement the following SAP note in the execution system and re-execute the     
activity 'Generation of scrambling programs for non-cluster tables' to solve this issue.
SAP NOTE : '1915906 - SAP LT V2 SP06: Dump during program generation'
Regards,
Jerrin Francis

Similar Messages

  • What is the best voice control program for macbook pro

    what is the best voice control program for macbook pro?
    i have lost the use of my arms and need full voice control.
    thank you.

    Welcome to the Apple Support Communities
    First, use speech recognition. It's installed on OS X, so you don't have to install a third-party app. See > http://support.apple.com/kb/PH11258?viewlocale=en_US

  • What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

    What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

    My phone is not jailbroken.  I don't know what you mean about hacked.   Maybe it is hacked?   This is what is happening: About three times over the past few months I've noticed that my phone while "off" will come on (light up) and the screen shows an arrow towards the bottom; an arrow such that you would see on various "players" in order to "play" video or audio, I've searched my phone and cannot find any app that produces this particular screen though. Once I pick up the phone when this screen myseriously appears out of nowhere and press anything, it goes away and goes to the standard "slider" front page to unlock the phone.

  • What is the best word processing program for mac?

    What is the best word processing program for Mac?

    That's an impossible question to answer - what type of writing will you be doing?
    Before we can point you in a direction you need to tell us what kind of writing you will be doing. As phrased, the question is a bit like "what's the best car?" Well few would doubt that a Ferrari is superior to a Honda minivan, but the Ferrari will not much use if you're dragging 4 kids, two dogs and the grandparents along.
    Academic?
    Word is the nearest thing to a standard format in the Humanties, but in the sciences and math you'll find Tex more useful for laying out formulas. The older Pages is quite good as a substitute for Word in many cases in the Humanties, but you'll have big problems with citations in the newer version. Apps like Nisus Writer Pro and Mellel are more powerful than Pages, but each have shortcomings. Scrivener and Ulysses are excellent drafting tools but you'll need a Word Processor for final layout. There are lots and lots of lightweight editors out there - Byword, iaWriter (and Writer Pro), OmmWriter - that have little functional use in Academic settings - poor or no support for citations for instance, or poor or no interoperability with Word - but which might be excellent for other uses.
    So, back to the key question: what kind of writing will you be doing?

  • What is the best word processing program for ipad2?

    What is the best word processing program for ipad2?

    I would recommend using Pages for what you are doing. It is the best one to use on the iPad itself, and has the ability to convert to an MS Word format. I know that it can do this through email, but I am also fairly certain you can import it in this format through iTunes, though you may need to convert it on the iPad itself.
    With iOS 5 and iCloud, I recommend kicking Word to the curb altogether and going with Pages on both machines. Not only will everything be more seamless, but iCloud will update the changes you make, on either device, automatically. And Pages is only 20 bucks through the App store for the Mac (OS 10.6.7 or later needed).

  • HT4650 what's the best free virus program for Mac?

    What's the best free virus program for the Mac?Not just for viruses, but removing all the duplicate folders and tuning up my mac.
    I'm not exactly sure what all the Activity Monitor stuff is, but I know when my
    Mac is sluggish and slow. Any ideas? (No, MacDefender is not a possibility)

    See Here  >  Antivirus Discussion
    And Here for keeping your Mac happy...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    http://www.thexlab.com/faqs/performance.html

  • So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message.  It will not allow me to quit the program.  Also, once that happens how do I remove the program from the computer?

    So I downloaded the wrong Airplane Mode program for my operating system and I now have AppleScript Error message.  It will not allow me to quit the program.  Also, once that happens how do I remove the program from the computer?

    What Airplane Mode program? To stop a running program launch Activity Monitor (in utilities folder) and quit the program from there. To remove the program drag it to the trash or better use the uninstaller that should have come with it.

  • What is the best money management program for macbook air

    what is the best money management program for macbook air

    You posted in the iPad forum instead of the MacBook forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
    Look at the similar posts to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
     Cheers, Tom

  • Wht is the difference between unicode program and non unicode program ?

    Hi guru,
    wht is the difference between unicode program and non unicode program ?
    Regards
    Subash

    About brief idea about unicode
    In the past, SAP developers used various codes to encode characters of different alphabets, for example, ASCII, EBCDI, or double-byte code pages.
    ASCII (American Standard Code for Information Interchange) encodes each character using 1 byte = 8 bit. This makes it possible to represent a maximum of 28 = 256 characters to which the combinations 00000000, 11111111 are assigned. Common code pages are, for example, ISO88591 for West European or ISO88595 for Cyrillic fonts.
    EBCDI (Extended Binary Coded Decimal Interchange) also uses 1 byte to encode each character, which again makes it possible to represent 256 characters. EBCDIC 0697/0500 is an old IBM format that is used on AS/400 machines for West European fonts, for example.
    Double-byte code pages require 1 or 2 bytes for each character. This allows you to form 216 = 65536 combinations where usually only 10,000 - 15,000 characters are used. Double-byte code pages are, for example, SJIS for Japanese and BIG5 for traditional Chinese.
    Using these character sets, you can account for each language relevant to the SAP System. However, problems occur if you want to merge texts from different incompatible character sets in a central system. Equally, exchanging data between systems with incompatible character sets can result in unprecedented situations.
    One solution to this problem is to use a code comprising all characters used on earth. This code is called Unicode (ISO/IEC 10646) and consists of at least 16 bit = 2 bytes, alternatively of 32 bit = 4 bytes per character. Although the conversion effort for the R/3 kernel and applications is considerable, the migration to Unicode provides great benefits in the long run:
    The Internet and consequently also mySAP.com are entirely based on Unicode, which thus is a basic requirement for international competitiveness.
    Unicode allows all R/3 users to install a central R/3 System that covers all business processes worldwide.
    Companies using different distributed systems frequently want to aggregate their worldwide corporate data. Without Unicode, they would be able to do this only to a limited degree.
    With Unicode, you can use multiple languages simultaneously at a single frontend computer.
    Unicode is required for cross-application data exchange without loss of data due to incompatible character sets. One way to present documents in the World Wide Web (www) is XML, for example.
    ABAP programs must be modified wherever an explicit or implicit assumption is made with regard to the internal length of a character. As a result, a new level of abstraction is reached which makes it possible to run one and the same program both in conventional and in Unicode systems. In addition, if new characters are added to the Unicode character set, SAP can decide whether to represent these characters internally using 2 or 4 bytes.
    A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
    In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or an NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
    If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
    As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
    You can also check out these official SAP locations on the SAP Service Marketplace:
    http://service.sap.com/unicode
    http://service.sap.com/unicode@SAP
    http://service.sap.com/i18n
    Regards,
    Santosh

  • Maintaince view creation for a cluster table

    Hi friends,
    I have created a maintaince view for a cluster table bseg and i have activated it its working fine..
    now my problem is i can create maintaince view for mutiple tables if other tables are linked with primary table using foriegn key relationship..
    Now can any one tell me is it possible to create maintance view for cluster table with multiple tables as i need a linked table with bseg which iam not able to get... ie : when i click on the relationship tab iam not getting the linked tables for bseg...
    now can i create a maintaince view with 2 linked cluster tables..
    if so can any one tell me how to create it.
    As sap says we can create projection view for cluster and pooled table and we cannot create database view for cluster and pooled tables , but it does not mentioned like that for maintaince view....
    I assume we can do it.... as iam trying to create a maintaince view with single cluster table then it shoudl allow me to create for multiple linked cluster tables.... and is it mandatory to maintain TMG for this maintaince view....?
    Regards
    KUMAR

    yes.. ur right inserting values into a cluster table other than standard sap tarnactions is dangerious....
    But sap didnot mentioned any where that we cannot maintain data for cluster tables using maintaince view... which it said for database view..that pooled and cluster table cannot be used for database view..
    Regards
    Kumar

  • Can we create secondary index for a cluster table

    hi
    can we create secondary index for a cluster table

    Jyothsna,
    There seems to be some kind of misunderstanding here. You <i>cannot</i> create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
    All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
    Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
    In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
    If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).
    Hope this clarifies things,
    Mark

  • Special authorization need for read cluster table??

    In one report, I use following coding to read information from RFDT table:
    form get_f110_parm .
      f110id-laufd   = p_laufd.
      f110id-laufi   = p_laufi.
      f110versionpar = space.
      clear:   buktab, fkttab, slktab, sldtab, trctab, usrtab,
               faetab, jobtab, f110v, f110c,  trcopt, f110versionpar.
      import buktab fkttab slktab sldtab trctab usrtab
             faetab jobtab f110c trcopt f110versionpar
             from database rfdt(fb) id f110id
             accepting padding.
    endform.                    " GET_F110_PARM
    I can fill F110c, trcopt and f110versionpar by this program. But there is no entry in table like fkttab, usrtab.
    Is there any authorization need for read cluster table??
    Thanks in advance.
    Edited by: Amy Xie on Dec 21, 2010 10:41 AM

    Hello,
    After you run your code, check transaction SU53 to see if any authorization check failed.

  • Cannot perform add node procedure for non-cluster Oracle homes

    After deleting one of nodes,tried to reinstall the node by addNode.sh.
    Got this error in Installer Window "*Cannot perform add node procedure for non-cluster Oracle homes*"
    Any idea?

    what is your oracle version and operating system name and version?
    check the output of cluvfy.sh
    runcluvfy.sh stage -pre crsinst -n node1,node2,.... -verbose
    refer the link:-
    http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/adddelunix.htm#CEGBACAH

  • I have signed up for the apple beta software program for public users and when i sign in to the appleseed page i only get an option to enroll my Mac. But what i want is to enroll my iphone for the public releases. How can i go forward with this?

    need to have the option enroll ios on the apple beta software program page

    That's the wrong email message. There's a separate one that was sent out for iOS.

  • Is the Up-To-Date program for iLife'11 available for Bulgarian customers ?

    Hi,
    I heard about the Up-To-Date upgrade program for iLife'11.
    When it will be available for customers from Bulgaria who purchased their computers from bulgarian Apple Premium Reseller stores ?

    If your eMac were eligible you would have had to exercise your option within thirty days.

Maybe you are looking for

  • Non English characters in BIP email

    Hi, my report contains Japanese characters, when I view the output in HTML format. It is displayed properly. But when I click on send button , enter email parameters like to, cc, bcc, subject , etc and send it, in the mail I receive, the japanese cha

  • Displaying a PDF for a form on web browser in  Web Dynpro Abap

    Hey I have a form (a set of input elements) on a view Now i want that as soon as i press execute , a pdf form is displayed with the values entered on the view. Thanks Shivi Goel

  • How to populate LOV at run time in developer

    I want to populate my LOV with with say SELECT NAME FROM MY_TABLE Also I have text item in my developer form I want to display this item depending upon the result of my query i.e If have ten record this text item would show ten records and if have el

  • What are the differences between ZAV and Spoon?

    It has been many years since I used or looked into Zenworks and I was quite pleased to see this product as I was investigating moving to VDI. This appears to be a nice step toward that. I am confused as to the differences between Novells product and

  • Switching to another computer????!!!!

    I recently purchased a new computer. Now I was just wondering if there is a way to put all of my itunes songs/podcasts onto my new computer when I hook it up or if I am going to lose all my songs? Is that making sense? I have an Ipod and don't really