Item Category and MRP type for material is not allowed

Hello all,
I got a Error Message:
Transaction Z113 is not defined (Message no. V1347)
Diagnosis
This combination of item category Z113 and MRP type for material is not allowed.
System response
The system does not allow further processing of this item.
Procedure
Check your entry.
You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
The SD Configuration seems all right, I have:
Sls Doc Type (VOV8) ZA9 (no delivery type assigned)
Item Category (VOV7) Z113
Assigs Sls Doc & Item Ctgry (VOV4) ZA9/ZNOR/blank/blanl/Z113
ZNOR = Std Item-Av. chck Del
ZNOR defined in MM03/Sls Org 2
Define Schedule Line (VOV6) = Z7 (without delivery)
Z7 has FLAG on Prod Allocation
Assign Schedule Line (VOV5) = Z113/ND/Z7
At table: TVEPZ
I have the entry: Z113/ND/Z7
Guys, what would?
Please help me out because I am stuck in this issue.
Thanks a lot,
Barbara

Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
New Rqmts class gets tied to a Rqmts Type
New Rqmts Type gets assigned to rqmts class
Strategy, assign the Rqmts Type to it
Strategy Group, Assign the Strategy to it
MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
It may be something in this area that you need to trace through ?
Bill

Similar Messages

Item category (Customized )ZJT1 and MRP type for material is not allowed

Hi Guys,
When i try to create the order i see the error as item category and MRP type of the material is not allowed.
I checked in Vov5 table, i could observe that Schedule line category is maintained.
Could you please help us in resolving this..
Thanks and regards,
Rahul

Hi,
Please assign the Item Category ZJTI and MRP type (for eg: PD) assigned to the schedule line category in IMG under Sales and Distribution--> Sales ---> Schedule line -->Assign schedule line
Hope this resolve your issue
Regards,
KrishnaO

Item category and mrp type combination not allowed in MTO

Hi,
i am working on make to order without variant configuration scenario,
while creating any customer order i am getting following error.
"This combination of item category YBTA(customized item category) and MRP type (i have used mrp type PD ) for material is not allowed.", due to this error i am not able to create any order.
Please help me to solve this problem.
Regards
Edited by: abhijeet rachkuntwar on Aug 24, 2009 7:47 AM

I have the same problem. You have posted the question long time back. if you happen to solve the problem plz help me by answering your question. if not, I would appreciate help from all the experts here
Many ThanX.

Item category and pricing type

Dear All,
I have an requirement of special Sales order from end user.
In our business scenario, while creating invoice, we click on update button (conditions tab) and choose pricing type B to get the present/updated price.
But now we have some special customers for whom we have to maintain the same price of items till the total quantity gets despatched. Even if the price of item gets updated, the same should not get updated even we click on update button.
During making of invoices we have a practice of mrerging many sales order into one delivery and merging many deliveries into one invoice.
Right now we have many normal invoices created with item category TAN(pricing type is maintained as G).also we have made special orders with item category ZTAN. How do i bill them together, without changing pricing type G To B in TAN, in which the special orders dont get updated but the normal orders get updated by clicking update button ?
Can anyone pls tell me, can i create a new pricing type in which i can update items with any item category except ZTAN?

I have tested with one open sale order where the pricing date for a material is 22-04-09. For that material, I have changed the pricing in VK11 with effective date as 28-04-09 and saved.
In VA02, I clicked the "Update" button in condition tab and system is not picking the revised price. This means, what I said earlier holds good.
To summarise, in copy control for your item category, if you maintain "G" for the field "Pricing Type", and if you change the pricing condition in VK11, system will not consider the revised price in existing sale orders unless the pricing date is within the validity period in VK12.
thanks
G. Lakshmipathi

Item category and condition type

Hi
I would like to know where you assign a condition type to an item category OR vice-versa? Pls let me know the t-code/table..
Reward points for help
Siddharth

hi siddarth,
we won't assign condition types directly to item categories.
We will place the condition types in pricing procedure as per our requirement and assign that pricing procedure to the combination of sales orgn + Dist. Channel + division + document prcing procedure + customer pricing procedure
the document pricing procedure comes from Sales document functionality
Customer pricing procedure comes from Customer master Data
When we place order we enter doc type, sales area and Customer...based on this combination the pricing procedure is identified and prices, discount and taxes will be calculated for the items which we enter in the sales order.
Item category in the sales order is determined based on the sales doc type + item category group + usage + higher level item category + default itemcatogery.
But in pricing procedure when we place the condition types we can control some features like the condition type is only accessible only when certain precondition met by the item category. I will explain it with example
take the condition type PR00.
for this in pricing procedure in the field requirement we enter as 2 which means 'item with pricing'. that means this PR00 condition type is accessible only if the sales document item satisfies that requirement..if sales document item is standard item TAN ..in TAN item category functionality in the field 'PRICING' it should contain either 'X' or' B' then only the price for that particular item category is calculated which means that condition type is executed.
I hope u understand the link between those two.
reward points if it is helpful
urs
raj r

Change in item category and settlement of old sales order not possible

Hi
I have to settle sales orders in VA88 and transfer data to COPA. I want to do directly without result analysis. So, in the item category, I removed the result analysis key. And the settlement goes thru.
My issue is that there are orders in July 2010 which have to be settled, but it does not work since the changes in item category has happened this month in Aug 2010 and the July sales order are also invoiced.
Pl suggest a solution to settle the July sales order to COPA.
Thanks
kamala

Hi Kamala
I see only one possibility... The old sales order consists of some GL accounts posted in it which is not mapped in the allocation structure...
Alloc Str has 2 parts - i.e. One, it consists of a group of cost elements it has to handle and Two, it consists of the valid settlement receivers like PSG, CTR, etc
You say, this alloc str works well with new sales orders.... The 2nd part of alloc structure (i.e. valid receivers) applies equally to all sales orders.. But what can really differentiate the 2 sales orders is the cost elements posted on it...
I dont foresee any other posslbe reason
Regards
Ajay M

MRP TYPE for Periodic planning in the material master.

Dear gurus,
i need planned the materials in the periodic modality, are there the type MRP in the material master for create the planned file ( table MDVM) one once a month or in the specific period chose ?
Example :
I need that the material master don't create a file planned ( MD20- TABLE MDVM) for a change of the requirement situation new , but i would like that the flag in the table ( MDVM) or file of the planning MRP created when the today date is in the period specific.
31.3.2011 (or period 1.4.2011- 10-4-2011)Date for the create a file MRP and after when run MRP planned the material, for others scenary the system must not planned the material.
Are there the MRP type for my problem? Or the customizing setting?
Thanks a lot
Dani

Dani,
Not sure if MRP type or customizing can help here. And even if we are able to achieve this requirement it will be applicable at plant level.
However, try exploring option of periodic lot size (weekly, monthly, etc). This will work according to period you've set and should give you the results you are looking for.
Regards,
Himanshu

MRP type for two different types requirments( Sale order and PIRs)

Dear All,
We have requirment some materials we have sales order and PIRs. For sales order we want to consider with "MRP type" as PD and PIR we want to consider "MRP type" as VB manual reorder point planning.
Is there any stadard solution.
If standard solution not possible also poivde some inputs on enhancement.
Regards
Sailendra
Edited by: nivedita yadav on May 7, 2010 2:31 PM

Sailendra,
your post is confusing, how you want to different MRP type for same material?
and why its needed?
1) you can use MRP type PD , and incoming sales order will search in existing stock or will create procurement proposal ( depends upon what strategy you are using)
2) If you are using VB then when ever you stock will fall below the reorder point you maintained in material master , system will create new procurement proposal, here the manual means the value you need to maintained manualy for reorder point and safety stock.
In automatic reorder point planning, both the reorder level and the safety stock level are determined by the integrated forecasting program.
The system uses past consumption data (historical data) to forecast future requirements. The system then uses these forecast values to calculate the reorder level and the safety stock level, taking the service level, which is specified by the MRP controller, and the material's replenishment lead time into account, and transfers them to the material master.
hope it will help you.
Regards
Ritesh

Link b/w item category and material group

Hi All,
Is there any link between item category and material group.
Regards
Pavan

Hi Pavan,
Item Category
Item Category is a control field that allows the PR to follow the correct path for the correct path for that category of PR. The SAP system is delivered with a set of item categories
Blank -Standard
K- Consignment
L- Sub Contracting
S- Third Party
D- Service
U- Stock Transfer
Selecting an item category allow the display of certain fields and not others
For Ex: If PR item has an item category K for conignment then invoice receipts will not be allowed
Material Group
Material group is a method of grouping of similar materials.It is defined either by using classification or by configuration. It is important not only for seracing the materials but also in other areas of purchasing
A purchace inforecord can be created with out a material number but must require materail group and vendor
Material group is configured through Tcode WG21
And i do not find any link between them
I hope this gave you the clarity
In case of any more information required do get back
If found helpful reward accordingly
Thanks & Regards
Pavan

Kindly give authorization object for mrp type in material master

Hi friends,
Kind tell me what is the authorization object for MRP type in material master.
Your help is considered more important.
thanks in advance
willaims

hi,
check your authorisation objects here:
Go to PFCG --> Environment (at menu bar) --> authorization objects --> Display...
Here see for MRP and MM for material managament in the tree structure...
Regards
Priyanka.P

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

Item category and Account assignment category field grayed out in PR/PO

Hello all,
While making a PR/PO we use both the item category and account assignment category. However, after saving the PR/PO, when i try to change the fields through ME22N/ME52N, the fields are greyed out. I dont think this can be controlled through the layout screen.
Is there anyway the fields can be made modifiable in ME22N/ME52N ?
Please help!
regards,
Soumyadeep.

Hi,
Well, actually you can control the Field settings in customization of Document Type. Check the following :
Go to SPRO>MM>Purchasing>Purchase Order>Define screen layout at document level
Click on the desired Document Type and see if the Field selection for Item Cat and Acct Assignment is checked for Display for that Document Type. If it is then change it to Optional.
Now, Go to SPRO>MM>Purchasing>Purchase Order>Define Document Type and see if the Field Selection Key is assigned to the (Updated just now) document Screen layout.
Hope this helps,
Best regards
Amit Bakshi

Exact difference between Item category and Account assignment category

Can anyone plz give the exact difference between account assignment category and Item category
Thanks inadvance

Hi,
Account Assignment Category: Key indicating whether an item is to be assigned to an auxiliary account (such as a cost center). The account assignment category determines which account assignment data (e.g. cost center, account number, etc.) is required for the item.
Item category: Identifier indicating the characteristics of an item. The item category determines whether the following are necessary or allowed with regard to an item:
Material number, Additional account assignment, Inventory management in the R/3 System, Goods receipt, Invoice receipt.
Prase

Can you explain about Higher-level item category and item usage?

Hi all
Can you explain about Higher-level item category and item usage?
thanks all

Higher level item category and Item usage are used in the item category determination.
Let me take an example of Item Category TANN (Free of charge Item)
Item category Determination: Sales Document type + Item Category Group + Usage + Higher Level Item Category
TA + NORM + FREE + TAN = TANN
Higher Level Item category: The category on which this item category is dependent. meaning for TAN , TANN is a free item. Therefor TAN is the higher level item category.
Item Category Usage: It controls system response during document processing. The line item has an specific usage according to that usage it has to respond. Free for free items, text for text items etc.
Regards
AK
Reward points if helpful

Movement Types for Material Reservations

Dear All
I have defined New package for defining new movements types for material reservation in PM order. this activity is carried out at following path.
SPRO> Plant Maintenance and Customer Service>Maintenance and Service Processing--> Maintenance and Service Orders >General Data>Define Movement Types for Material Reservations.
This has been carried out as i want to take the material in using 904 movement as reversal of 261.
Can any body tell me where can I assign tghis package to Order/order types?
Regards

hi
In the standard system, movement types are preset which you must not change.
For the components, Plant Maintenance and Customer Service, the entry with the key 'IWO1' is relevant. In addition, you only need the two entries for the goods issue (GI) of materials for maintenance orders and the accompanying reverse operation (GI cancellation).
as of my knowledge we don't have the option to go with ordertype wise settings
-AShok
Edited by: Ashok Keerthipati on Nov 19, 2008 5:57 PM

Item Category and MRP type for material is not allowed

Similar Messages

Maybe you are looking for