Item category for free goods that does not require extra free goods

Hi all,
I have created 3 item categories (ZM1J, ZM0J and ZMFJ)
ZM1J is standard item for sales
ZM0J is free goods
ZMFJ is also free goods
I have setup VBN1 for free goods "buy 10 get 1 free" and my order is including these 3 item categories
ZM1J 10 EA and ZM0J 1 EA. These 2 lines are correct as I need.
Then I give other free goods which is ZMFJ 10 EA and system is asking me to give free goods 1 EA but I don't want to give free goods for ZMFJ. I will deliver only 21 EA (10 for sales and 11 for free)
What config it should do for this case?
Another question, ZM0J is selected by default. How to manually change it to ZMFJ in sales order? This is because some case, I still need to use ZM0J.
Please advise. Thank you very much.
Best Regards,
Darin

Hi,
Item category is determined by the four combination
Sales order + item category group + usage + item category at higher level.
Now you are using free goods determination procedure.
So that does not depend upon item category determination.
You have to define the item category determination so that proper delivery and proper pricing happens.
Now if you are giving 10more free item for which you have maintain free goods determination master data.
Then system will automatically give one more free goods for that material.
but if you giving some other material as a free goods then please let me know.
Give your requirement that in which way you want to process your ZMFJ then we can give you better suggestion.
To define alternative item category go to
IMG u2013 SD u2013 Sales u2013 Sales documents u2013 sales document item u2013 assign item category.
Over here you can assign alternative item category for your combination.
If you assign over here then you can change manually in the sales order.
Regards
Raj.

Similar Messages

R1: tcAPIException: Duplicate schedule item for a task that does not allow multiples.

Hi,
I'm struggling with the following task:
I have to assure an account exists for a given resource. I do provision it with the .tcUserOperationsIntf.provisionObject().
I've created a createUser task to create the account.
The task code checks if there is already matching account.
If no account exists, is is created in the disabled state, and the object state of OIM account is set to 'Disabled' by means of task return code mapping.
If it exists, it is 'linked' to OIM account.
The problem is if the existing account is enabled, I have to change the OIM account state to 'Enabled' either.
To implement this (thanks, Kevin Pinski https://forums.oracle.com/thread/2564011 )) I've created an additional task 'Switch Enable' which is triggered by a special task return code. This task always succeeds, and its only side effect is switching the object status to 'Enabled'.
By I've getting the 'Duplicate schedule item for a task that does not allow multiples' exception constantly:
This is the stack trace:
Thor.API.Exceptions.tcAPIException: Duplicate schedule item for a task that does not allow multiples.\
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2925)\
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2666)\
at Thor.API.Operations.tcUserOperationsIntfEJB.provisionObjectx(Unknown Source)\
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)\
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)\
at java.lang.reflect.Method.invoke(Method.java:601)\
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)\
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)\
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)\
...skipped
at Thor.API.Operations.tcUserOperationsIntfDelegate.provisionObject(Unknown Source)\
... skipped
What did I wrong?
Regards,
Vladimir

Hi Vladimir,
Please select 'Allow Multiple Instance' checkbox for the process task.
Thanks,
Pallavi

TS1398 After updating to ios 6 my iphone 4 would no longer connect to my home wifi. At work we have a free wifi connection that does not require a password. However my wifi at home is password protected. I have the right password. It works on my ipod touc

After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!

I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.

Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

Is there a free java based forum that does NOT require disk write access ?

Hello,
I've been trying to set up mvnForum (www.mvnForum.com) on my site but I've had to give it up as the way the server is set up I can only give write access to Tomcat if I give write access to everyone !
I don't need my forum to have disk access as it can just use the mySQL database the whole time. So is there a good java based forum out there that does not require disk access ? I'm hoping to find one that has e-mail authentication for people who register and things like that.
I know a php forum that will do it already but as the rest of the site is written in jsp it would be nice to be able to integrate it properly. Any help greatly appreciated.

Please try mvnForum beta3, it doesnot require disk write. Since RC1 mvnForum use disk access to write Lucene search index and attachment file.
Regards,
Minh Nguyen
mvnForum Developer

How do I create an executable for a computer that does not have IVI drivers

I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
Thank you,
Zach Oberman

Zach,
Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
You may be able to obtain a traditional LabVIEW driver from
Tektronix
Developer Exchange
Requesting a
driver
Other Resources
Thanks,
--Bankim

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the least very disappointed with such horrible service

Which service did you subscribe to? Adobe PDF Pack?
Once I know the service that you subscribed to, I can move this post to the right forum so that you can get in touch with the folks who can assist you.

How do I download Adobe Flash Player for a computer that does not have internet?

How do I download Adobe Flash Player for a computer that does not have internet?

Hello Walter,
that's it, usually you get and Adobe Flash Player Installer only. For a distribution in a company, or an installation on a PC without internet access, Adobe has available an offline installer. This installer you don't need to uncompress it first. You can download the installation file from there (you must logged in with your Adobe ID): http://www.adobe.com/products/flashplayer/distribution3.html
Hans-Günter

TS1702 HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK

HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK

Please stop SHOUTING at us.
http://support.apple.com/kb/ht4098

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

Can I convert a proxy for a class that does not has any interfaces?

Can I convert a proxy for a class that does not has any interfaces?

Hi.
I can hardly understand your question: what do you want your proxy (what kind of proxy?) to be converted into?
All I can tell you is the following: Proxies created using java.lang.reflect.Proxy can only be created using an interface. This interface has to be implemented by the proxied object. So: no interface, no java.lang.reflect.Proxy.
Bye.

Category for material type MAT_KMAT does not exist for configurable product

Hi,
Trying to download Confihurable product from ECC to CRM,for this I am getting the below error.
"Category for material type MAT_KMAT does not exist"
For this , i have successfully downloaded the object DNL_CUST_PROD1, but still the material type MAT_KMAT does not exist under R3PRODSTYP in COMM_Hierarchy transaction.
kindly let me know how to get the material type MAT_KMAT under R3PRODSTYP .
Regards,
PV

Hi
Please go through the below pdf document. This will be useful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9076a9a4-923c-2c10-7483-d997a9eae976?quicklink=index&overridelayout=true
Regards

Is there a patch for the NTP security issue that does not require Xcode?

Is there a patch for the NTP security issue that does not require Xcode? I have an older Intel mini that can't be upgraded beyond 10.6.8 and I currently don't have room for Xcode 3.2.5. Has somebody trustworthy posted these binaries?

NTP fix for Snow Leopard: https://drive.google.com/folderview?id=0BxQCbeIgpA2uVjFiN1h4bGZNQ2c&usp=sharing
You can also go to System Preferences/Date & Time and deselect Set time Automatically.
Snow Leopard users: Turn off automatic date and time in System Preferences immediately

HT5312 how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

someone please help, I can't even delete content because it prompts me for a password for an account that I mistyped - wth?????

Where can I get a digital certifcate that does not require a USB key?

Where can I get a digital certificate that I can use with Adobe Acrobat that does not require a USB hardware key?
I have been able to sign PDF documents with Adobe Acrobat versions 6 and 9 with my code signing certificate. When I use my code signing certificate Acrobat says the validity of the document certification is unknown.

Per existing standards (RFC 5280) code signing certificates may not be used for signing. For a number of versions Acrobat had a bug that ignored this requirement. Starting with version 11.0.07 Acrobat (and Reader) enforces this requirement.

Item category for free goods that does not require extra free goods

Similar Messages

Maybe you are looking for